Augmentation of water supply system under Academy BSF Tekanpur SH Replacement of submersible Openwell submersible and Monoblock pumpset for water supply i c panels cables etc

Amount

Providing installation testing & commissioning of Monoblock pump 3 phase 20 HP non self priming with 125/100 mm outlet, complete with connection etc as required on site. (Kirloskar - model-KDS 2030+ or equivalent to Texmo / CRI /Grandfos) As per direction of engg in charge

Fabrication, Supplying, installation, testing and commissioning of 50Hp VFD bypass Star-delta feeder panel (As per Annex.1)complete in all respect. Make: vsons Technocrats Private Limited/ Adlec/ Tricolite/Any CPRI APPROVED MAKE as per direction of engineer in charge.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Supplying and fixing of master controle relay (Auto start unit ) with adjustable power on delay,overload protection ,maximum adjustable relay range,dry run protection,dry run restart option single phase protection motor cable cut protection ,3phase digital ammeter and volt meter and error display on LCD i/c connection as required .make - Naren ELECTRIX(Model APT17) OR equvalant as per direction of engg in charge

Providing & Laying of 6 sq.mm. Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors, 1100 Volt, conforming to IS 694. (Acceptable make- Havells /Polycab)

Providing & Laying of 16 sq.mm. Flat Three Core PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump Motors, 1100 Volt, conforming to IS 694. (Acceptable make- Havells /Polycab)

Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

100 mm width X 50 mm depth X 1.6 mm thickness

Supply, installation , testing and commissioning of wall mounted,indoor/ outdoor bus bar chamber/ box (i/c 8 way 200 amp TPN copper bus bar) front operated, dust & vermin proof, powder coated paint of approved shade and earthing the body i/c detachable gland plate of 2 mm thick, including following accessories etc. as required. Make: Havells IHBC020008 / l&T/LEGRANDS as per direction of engineer in charge.

Supplying of suitable size GI/CI/PVC foot valve for 4''/5''/6'' as required

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. & testing of joints Making connection of G.I. distribution branch with G.I. by providing and fixing tee, including cutting and threading the pipe etc. complete as required as per direction of Engineer in Charge.

upto 65 mm nominal dia Pipes

80 mm nominal dia Pipes

100/125 mm nominal dia Pipes

Fabrication, Supplying, installation, testing and commissioning of outdoor/indoor type compartmantalised, double door feeder pillar made out of 2mm thick MS sheet of size ( 400 mm Depth ) with front opening totally enclosed weather, damp proof with MS angle frame made out of 50X50X6 with 600mm long legs suitable for 415V, 3 phase 50Hz AC supply complete with painting, connections, interconnections with aluminium conductors complete with cement concrete foundation i/c finishing etc. and having provision for fixing required accessories as required complete in all respect. Make: RS Controls and Switchgears Private Limited/ Adlec/ Tricolite/Any APPROVED MAKE as per direction of engineer in charge.

Supply, installation, testing and commissioning of following accessories in existing panel cubical type compartmentalized having necessary cable alleys, including cconnection inter-connection with aluminium busbar etc as per requirement and direction given by the Engineer-in charge(to be fixed in items srl no. 14)

400A, 36 KA TP&N, MCCB with thermal magnetic release with Spreader terminal and Rotary operating mechanism

250A, 36 KA TP&N, MCCB with thermal magnetic release with Spreader terminal and Rotary operating mechanism

200A, 25 KA TP&N, MCCB with thermal magnetic release with Spreader terminal and Rotary operating mechanism

160A FP , 25 KA TP+N, MCCB with thermal magnetic release

125A FP , 25 KA TP+N, MCCB with thermal magnetic release

16-100A, 16 KA TP+N, MCCB with thermal magnetic release

40/63 Amp TP&N MCB

40/63 Amp SP&N MCB

32 Amp TP&N MCB

Digital VAF Meter 4110 Series L&T make

R,Y,B Phase Indicating LED ,

C.T's 200/5Amp

R,Y,B Phase Indicating LED -3 Nos

2A SP MCB -3 Nos

400 amp aluminium bus bars insulated with PVC color coded heat shrinkable sleeves and insulators

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes stanner nozzels, jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

80 mm nominal dia Pipes

150 mm nominal dia Pipes

250 mm nominal dia Pipes

Dismantling of gate vale/C.I. sluice valve including stacking of useful materials within a lead of 50 metres

Up to 150 mm diameter

above 150 mm diameter

Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc.

80/100 mm diameter Class II

125 mm diameter Class II

150 mm diameter Class II

200/250 mm diameter Class II

Providing and fixing gun metal/brass gate valve with wheel complete with all accessaries as required as per direction of engg in charge.

Providing and fixing of horizontal /verticle non return valve with wheel etc complete with all accessaries as required as per direction of engg in charge.

upto 65 mm

upto 125 mm

Providing and laying in position cement concrete 1:3:6 (1 cement : 2 coarse sand : 6 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Painting and repair of outdoor Electrical panel in installed position with one coat of primer and two or more coats of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade complete including rubbing and scraping , cleaning and welding the hinge /base gland plate cover etc complete as required (Berger,Asian, Nerolac paint) as per direction of engineer in charge

Painting of filtration tank(out side) in installed position with one coat of primer and two or more coats of synthetic enamel paint of approved brand and manufacture of required colour to give an even shade complete including rubbing and scraping , cleaning etc complete as required (Berger,Asian, Nerolac paint) as per direction of engineer in charge

Painting of filtration tank (inner side) in installed position with with black anti-corrosive rubber paint of approved brand and manufacture complete including rubbing and scraping , cleaning etc complete as required (Berger,Asian, Nerolac paint) as per direction of engineer in charge

Supplying and laying of filter media(media bed & supporting bed) of following size inside filtration tank complete i/c removal of old existing mud & refilling the new sand/stone(filter media) with leveling and proper laying in layer inside the tank.

0.2 mm - 1.6mm(Silica sand )

1.6 mm - 4 mm(Fine silex Media )

4 mm to 8 mm(Coarse Silex Media)

12.5 mm to 20mm(Gravels)

25mm to 30mm (Pabbles)

35mm to 50 mm(Pabbles)

Making of the hole inside the road (Bitumin / PCC ) for laying of Under ground cable in Suitable HDPE/GI pipe without damaging of road.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed heavy class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required( Havells/Polycab make wire, Havells/Anchor/Cona Make Switch, Polycab/AKG/finolex make Conduit)

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel conduit including dismantling as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

3 x 1.5 sq. Mm

3 x 4 sq. Mm

Supplying and fixing of following sizes of heavy class PVC conduit/casing caping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20/25 mm dia Make/AKG/POLYCAB/FINOLEX/Shrinath Make

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required

5/6 A switch

3 pin 5/6 A socket outlet

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 A socket outlet and 5/6 A piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8/12 way , Double door. Havells/L&T/LEGRAND

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

4 way (4 + 12), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole. Havelss/L&T Make

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation and refilling the trench etc. as required, (Excavation the existing faulty cable, removing the cable the trench for identifying the faults and relaying the repaired cable in the trench) but excluding sand cushioning and protective covering.

Upto 35 sq. mm

Above 35 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe /SURFACE as required.

Upto 35 sq. mm

Above 35 sq. mm and upto 185 sq. mm

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 25/35/50/70 sq. mm

3½ X 95 sq. mm

3½ X 120/150/185 sq. Mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

2/3.5 X 10/16/25/35 sq. mm (19-25mm)

3½ X 35/50/70 sq. mm (32-38mm)

3½ X 95/120/185sq. mm

Providing and fixing of full glow 4' 18/20 Watt Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack Tube lighting fixture ceilling/Wall mounting, ,complete with connection, testing etc. as reqd. Make Havells E-LITE LED PRIDE PLUS /Philips/Havells/wipro/bajaj

Supplying ,Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 2 x 16 sq. mm PVC insulated and FR PVC armoured, LT Power Cables - Aluminium Conductor size in existing pipe/cable tray/ on wall surface or in existing cable tray as required. Make Havells/polycab

Supplying ,Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 x 25 sq. mm PVC insulated and FR PVC Armoured, LT Power Cables - Aluminium Conductor size in trench(i/c making trench) existing pipe or on wall surface or in existing cable tray as required. Make Havells/polycab

Supplying ,Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5 x 95 sq. mm PVC insulated and FR PVC Armoured, LT Power Cables - Aluminium Conductor size in existing pipe or on wall surface or in existing cable tray as required. Make Havells/polycab/grandley/KEI as per direction of engg in charge

Supplying and Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade (heavy duty )armoured UG electric cable with aluminium conductor of size 4C X185 sq.mm. in the existing masonry/ open duct/ hume pipe/surface as required.(Havells/KEI/Polycab)as per direction of engg in charge.

Supplying, installation, testing & commissioning of 50W LED Flood light luminaire,Energy saving, environmental friendly, long life, one design for aesthetic consistancy in multi purpose application with driver included, suitable for highlighting architectural features or Area lightin complete with all accessories and connections with 3 x 1.5 sq.mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. milo or equivalent with 2 year warranty (as per direction of engg in charge )

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.(a) 63 mm dia (OD-63 mm & ID-51 mm nominal)

120 mm dia (OD-120 mm & ID-103 mm nominal)

Garg Electric Works (BID ID -3198017)