82456REPAIRS TO INTERNAL ELECTRIFICATION, EXTERNAL ELECTRIFICATION, WATER SUPPLY INSTALLATIONS AND STREET LIGHTS AT KALPAKKAM and VELLACHI UNDER AGE I NAVY CHENNAI

Amount

Taking down copper/aluminium point wiring (light,fan, socket or power) including fixture and fittings complete etc removing the materials for taking credit and making good the disturbed surface of wall/floor etc complete all as specified and directed by Engineer in Charge

Taking down carefully submain wiring with aluminum conductor cable 4/6/10/16 Sqmm in PVC conduit complete removing the materials and taken as credit and making good the disturbed surface of wall / floor etc complete all as specified and directed by Engineer in Charge

M&L for point wiring for one light point controlled by one switch with 1.5 sqmm (Nominal area) unsheathed multi-stranded copper conductor PVC insulated cable 1100 volts grade single core FRLS drawn into and including non-metallic rigid PVC conduit of 20 mm dia, concealed FRLS wiring, along with 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof excluding Modular Metal flsh box and white cover plate with frame the switches, sockets, fan regulator etc as required suitable for Modular type fitting /fixture etc witch shall be measured and paid separately complete all as specified and directed by Engineer in Charge

All as per Sl item No. 03 above but for one fan point controlled by one regulator / switch.

All as per Sl item No. 03 above but for one 3 pin socket outlet 6 amps socket on independent board

All as per Sl item No. 03 above but for one 3 pin socket outlet 6 amps socket on same board

All as per Sl item No. 03 above but for one bell/buzzer point controlled by one push button on the same board with other switches.

All as per Sl item No. 03 above but for one light point controlled by two Nos of two way switches.

All as per Sl item No. 03 above but with 4 sqmm cable for one 3 pin socket outlet 16 Amps on independent board with 4 sqmm cable as earthing conductor.

S&F modular switch single pole one way 6 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches complete all as specified and directed by Engineer in Charge

S&F modular switch single pole one way 16 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches complete all as specified and directed by Engineer in Charge

S&F modular Socket 6A-2/3 pin combined 2 Module complete all as specified and directed by Engineer in Charge

S&F modular Socket 6A / 16A - 2 / 3 pin combined 2 Module complete all as specified and directed by Engineer in Charge

S&F ceiling rose 3 ways PVC / Polycarbonate, isolated body complete all as specified and directed by Engineer in Charge

S&F Bell, AC,230 Volts, single pole , Multi music type complete all as specified and directed by Engineer in Charge.

S&F Stepped type electronic fan regulator 120 W 2 Module etc complete all as specified and directed by Engineer in Charge.

S&F modular switch single pole two way 6 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches.

S&F in repair switch piano flush type single pole one way 5 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches.

S&F in repair switch socket combination piano flush type 3 pin, 5 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches.

S&F in repair switch socket combination piano flush type 5pin, 5Amp/ 16 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches.

S&F in repair modular switch single pole one way 6 A 240 Volts complete all as specified and as directed including taking down old unserviceable switches.

S&F in repair modular Socket 6A-2/3 pin combined 2 Module complete all as specified and directed by Engineer in Charge

S&F in repair modular Socket 6A / 16A - 2 / 3 pin combined 2 Module complete all as specified and directed by Engineer in Charge

S&F in repair ceiling rose 3 ways PVC / Polycarbonate, isolated body complete all as specified and directed by Engineer in Charge

S&F in repair Bell, AC,230 Volts, single pole , Multi music type complete all as specified and directed by Engineer in Charge.

S&F in repair Stepped type electronic fan regulator 120 W 2 Module etc complete all as specified and directed by Engineer in Charge.

S&F Modular cover plate with frame 1 module complete all as specified and directed by Engineer in Charge

S&F Modular cover plate with frame 2 module complete all as specified and directed by Engineer in Charge

S&F Modular cover plate with frame 3 module complete all as specified and directed by Engineer in Charge

S&F Modular cover plate with frame 4 module complete all as specified and directed by Engineer in Charge

S&F Modular cover plate with frame 6 module complete all as specified and directed by Engineer in Charge

S&F in repair Modular cover plate with frame 1 module complete all as specified and directed by Engineer in Charge

S&F in repair Modular cover plate with frame 2 module complete all as specified and directed by Engineer in Charge

S&F in repair Modular cover plate with frame 3 module complete all as specified and directed by Engineer in Charge

S&F in repair Modular cover plate with frame 4 module complete all as specified and directed by Engineer in Charge

S&F in repair Modular cover plate with frame 6 module complete all as specified and directed by Engineer in Charge

S&F in repair Modular metal flush box 1 / 2 module complete all as specified and directed by Engineer in Charge

S&F in repair Modular metal flush box 3 module complete all as specified and directed by Engineer in Charge

S&F in repair Modular metal flush box 4 module complete all as specified and directed by Engineer in Charge

S&F in repair Modular metal flush box 6 module complete all as specified and directed by Engineer in Charge

S&F lamp holder PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified and directed by Engineer in Charge

Disconnecting and taking down from position FTL fitting type 1 X 36 / 40 watts ,1x18/20 watts,2x36/40watts,2/3x 18/24/36 watts and servicing checking and changing repaired parts and refixing in position including conecting up and making to working condition complete all as specified and directed by Engineer in Charge Notes:(i) Spares like Ballast 40 watts , 20watts, 18watts 36,24 watts Ballast Electronic type 40 W, starter 20 / 40 W, Bi-pin holder, Starter Holder etc will be measured and paid separatly as "Supplied only ".

Supply only electronic Ballast 36 watts

Supply only electronic Ballast 18/20/24 watts

Supply only Bi-pin holder

Supply only LED 9 Watts

Supply only LED 12 Watts/40 Watts

S&F in repair LED 15 Watts retrofit complete all as specified and directed by Engineer in Charge

S&F LED light fitting 4feet,1x20w,a trendy wall mounted battern,with extrunded aluminium housing,with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. Make: C&S Electric Cat Part No. LTTB4F20WLED/W Or equivalent in Crompton/Phillips ,

S&F LED light fitting 2 feet,1x10w,230v,a trendy wall mounted battern,with extrunded aluminium housing,with integrated LED driver, etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.Make C&S Electric Cat Part No. TTB2F10WLED/W Or equivalent in Crompton/Philips

Sub main wiring with three run single core 4 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade conductor drawn into and including non-metallic rigid PVC conduit 20 mm dia including conduit accessories all as specified and directed. Note ; 3 Run of 4 Sqmm cable and one run of 20 mm dia pvc pipe along with accessories will be measured as one RM.

Sub main wiring with three run single core 6 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade conductor drawn into and including non-metallic rigid PVC conduit 25 mm dia including conduit accessories all as specified and directed. Note ; 3 Run of 6 Sqmm cable and one run of 25 mm dia pvc pipe along with accessories will be measured as one RM.

Sub main wiring with three run single core 10 sqmm multi stranded copper conductor PVC insulated unsheathed cable 1100 volts grade conductor drawn into and including non-metallic rigid PVC conduit 25 mm dia including conduit accessories all as specified and directed. Note ; 3 Run of 10 Sqmm cable and one run of 25 mm dia pvc pipe along with accessories will be measured as one RM.

S&F in repair Energy saving new generation 10W LED bulkhead luminaire with opal diffuser.10W LED 6000K, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ

S&F in repair sheet metal enclosure powder coated double door for Board distribution with 200 Amps rated bus bar, MCB DB TPN 8 way , 415 Volts including , Disconnecting electric connections, dismantling from position unserviceable DBs complete all as specified and directed by Engineer in Charge

S&F in repair sheet metal enclosure powder coated double door for Board distribution with 200 Amps rated bus bar, MCB DB TPN 4 way including , Disconnecting electric connections, dismantling from position old unserviceable DBs complete all as specified and directed by Engineer in Charge

S&F in repair sheet metal enclosure powder coated double door for Board distribution with 200 Amps rated bus bar, MCB DB SPN 4 way including , Disconnecting electric connections, dismantling from position old unserviceable DBs complete all as specified and directed by Engineer in Charge

S&F in repair sheet metal enclosure powder coated double door for Board distribution with 200 Amps rated bus bar, MCB DB SPN 8 way including , Disconnecting electric connections, dismantling from position old unserviceable DBs complete all as specified and directed by Engineer in Charge

S&F in repair MCB SP 6 to 40 Amps 240 volts complete all as specified and directed by Engineer in Charge

S&F in repair MCB DP 6 to 32 Amps 240 volts complete all as specified and directed by Engineer in Charge

S&F in repair MCB 4 Pole 32 to 63 Amps 415 volts complete all as specified and directed by Engineer in Charge

S&F in repair Non-metallic rigid PVC conduit medium grade 20 mm to draw telephone cable / TV cable complete all as specified and directed by Engineer in Charge

S&F in repair Telephone socket modular type with connector complete all as specified and directed by Engineer in Charge

Taking down after disconnection of electrical connections etc of the existing ceiling fan 1200mm sweep of any make and checking for fault and hanging back after carry out all repair works including connecting up complete all as specified and directed by Engineer in Charge

Rewinding of ceiling fan 1200mm sweep stator coil with super enamelled copper winding wire of appropriate gauge / quantity of burnt stator coil.

Supply only ball bearing of ceiling fan 1200mm sweep.

Supply only capacitor of 2.5 mfd for ceiling fan 1200mm sweep.

Supply only condensor holder

Supply new shaft to match the existing

Supply new rubber shackle with bolt nut split pin complete

Scrubing / removing the existing paints from the ceiling fan 1200 mm sweep and painting the fan with two coats of synthetic enameled paint over a coat of metal oxide primer complete all as specified and directed by Engineer in Charge.

Taking down after disconnection of electrical connections etc of the existing Exhaust fan 300mm / 450mm sweep of any make and checking for fault and fixing back in position after carrying out all repair works including connecting up complete all as specified and directed by Engineer in Charge

Rewinding of exhaust fan 300mm sweep stator coil with super enamelled copper winding wire of appropriate gauge / quantity of burnt stator coil complete all as specified and directed by Engineer in Charge

Rewinding of exhaust fan 450mm sweep stator coil with super enamelled copper winding wire of appropriate gauge / quantity of burnt stator coil.

Supply only ball bearing

Supply only capacitor of 4 mfd for Exhaust fan.

Scrubing / removing the existing paints from the exhaust fan 300/ 450mm sweep and painting the fan with two coats of synthetic enameled paint over a coat of metal oxide primer.

Supply only new fan louvers 300mm dia sweep

Supply only new fan louvers 380 to 450mm sweep

Supply only new fan blades set for 300 mm sweep fan

Supply only new fan Blades for exhaust fan of 380 to 450mm sweep

Taking down after disconnection of electrical connections etc of the existing wall mounting fan of any size of any make and checking for fault and hanging back after carry out all repair works including connecting up complete all as specified and directed by Engineer in Charge

Rewinding of wall mounting fan of any type and make, stator coil with super enamelled copper winding wire of appropriate gauge / quantity of burnt stator coil.

Supply only ball bearing

Supply only capacitor of 4 mfd for wall mounting fan

Supply only condensor holder

Scrubing / removing the existing paints from the wall mounting fan 400 mm sweep and painting the fan with two coats of synthetic enameled paint over a coat of metal oxide primer.

Taking down after disconnection of electrical / water connections etc of the existing water heater of any capacity and of any make and opening the bottom cover replacing replacing the defective parts , fixing the cover and refixing in original position after carry out all repair works including connecting up complete all as specified and directed by Engineer in Charge

Supply only new water heating element of capacity 1.5 KW with rubber gasket Make : Racold / Bajaj.

Supply only new water heating element of capacity 2 KW with rubber gasket Make : Racold / Bajaj.

Supply only new thermostat suitable for storage type water heater.

Supply only Pressure release valve 15mm dia suitable geyser.

Supply only Air release valve 15mm dia suitable geyser.

Supply only Aparatas Geyser Assembly suitable for 25/35/50 ltrs capacity

Supply only new cut out suitable for storage type water heaer.

S&F3 core 4 sqmm copper conductorcable suitable for geysers of any size completee complete all as specified and directed by Engineer in Charge

S&F in repair Single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 Amps including taking down old unserviceable old single pole and neutral with a two pin and earth plug and socket complete all as specified and directed by Engineer in Charge

S&F in repair 3 pin plug top and metal socket of capacity 20 Amps complete all as specified and directed by Engineer in Charge

M&L for preparing external surface of water heater, cleaning and painting with one coat of synthetic enamel paint of white colour of approved make with brush and writing MES No. etc complete all as specified and directed by Engineer in Charge

S&F 3mm thick hylum sheet top cover on switch board including cuttying , fixing brass screw etc complete all as specified and directed by Engineer in Charge

Hanging only ceiling fan any sweep, including dismantling existing down rod, provision of new down rod of GI Pipe 15mm bore of pipe medium grade of length 600mm and connecting up with and including provision of cable from ceiling rose or connector to fan complete all as specified and directed by Engineer in Charge

S&F in repair new Exhaust fan Lower 300mm Sweep complete all as specified and directed by Engineer in Charge

M&L for taking up or down 25 or 32mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge

M&L for taking up or down 40 or 50mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge

M&L for 25mm bore Medium grade galvanised tubes with all fitting, laid in trenches complete all as specified and as directed by the Engineer-in-Charge

M&L for 40mm bore Medium grade galvanised tubes with all fitting, laid in trenches complete all as specified and as directed by the Engineer-in-Charge

M&L for 50mm bore Medium grade galvanised tubes with all fitting, laid in trenches complete all as specified and as directed by the Engineer-in-Charge

M&L for 25 mm bore Medium grade GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge

M&L for 40 mm bore Medium grade GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge

M&L for 50 mm bore Medium grade GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed by the Engineer-in-Charge

S&F in repair gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 25mm bore complete all as specified and directed by Engineer in Charge

S&F in repair gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 40mm bore complete all as specified and directed by Engineer in Charge

S&F in repair gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, for iron pipe of size 50mm bore complete all as specified and directed by Engineer in Charge

S&F in repair CI Non Returning valve 80 mm dia conforming to IS 14845 PN 1.0 with flanged and drilled ends and of any pattern including necessary jointing and jointing materials complete (with rubber gasket, boltsand nuts etc ) complete all as specified and directed by Engineer in Charge. Make: Kirloskar / Upadhaya /ACME

S&F in repair CI Non Returning Valve 100mm dia conforming to IS 14845 PN 1.0 with flanged and drilled ends and of any pattern including necessary jointing materials complete (with rubber gasket, boltsand nuts etc ) complete all as specified and directed by Engineer in Charge. Make :Kirloskar / Upadhaya /ACME

Taking out the worn out sluice valve and S&F CI sluice valve 80 mm dia conforming to IS 14845 PN 1.0 with flanged and drilled ends and of any pattern including necessary jointing and jointing materials complete (with rubber gasket, boltsand nuts etc ) complete all as specified and directed by Engineer in Charge. Make :Kirloskar / Upadhaya /Leader/L&T/ACME

S&F in repair CI sluice valve 100 mm dia conforming to IS 14845 PN 1.0 with flanged and drilled ends and of any pattern including necessary jointing and jointing materials complete (with rubber gasket, boltsand nuts etc ) complete all as specified and directed by Engineer in Charge. Make :Kirloskar / Upadhaya /Leader/L&T/ACME

S&F in repair foot valve heavy duty with gun metal working parts of 40 mm dia including removal from suction pipe of the pump set, foot valve complete all as specified and directed by Engineer in Charge

S&F in repair foot valve heavy duty with gun metal working parts of 50 mm dia including removal from suction pipe of the pump set, foot valve complete all as specified and directed by Engineer in Charge

S&F in repair foot valve heavy duty with gun metal working parts of 80 mm dia including removal from suction pipe of the pump set, foot valve complete all as specified and directed by Engineer in Charge

Flushing the bore well of size 150 mm dia 60 meter deep by means of Air compressor of capacity not less than 650 CFM at 150 PSI pressure for not less than four hours till the clear water comes out.

Repairs to electric driven pump set 0.5 HP capacity including removing from the foundation dismantling ,taking out old unserviceable spares and refixing the same after repair and replacement of spares on the existing position for complete all as specified and directed by Engineer in Charge. (Note: Rewinding and supply of Spares will be paid under relevant items here in after) Make : Kirloskar/ Ventura/ Suguna/ Tulu

Rewinding of motor stator coil complete as per IS-396 of 1953 using super enamelled copper wire of same gauge for coil against item No. 122

Supply only ball bearing (drive and non dirve end) against item No. 122

Supply only electrodynamically balanced bronze impeller against item No. 122

Supply only Impeller Key against item No. 122

Supply only Water Seal against item No. 122

Supply only Terminal box with terminal connector against item No. 122

Supply only Condensor suitable capacity / MFD against item No. 122

Repairs to electric driven pump set 1.5 HP capacity including removing from the foundation dismantling ,taking out old unserviceable spares and refixing the same after repair and replacement of spares on the existing position for complete all as specified and directed by Engineer in Charge (Note: Rewinding and supply of Spares will be paid under relevant items here in after) Make : Kirloskar/ Ventura/ Suguna/ Tulu

Rewinding of motor stator coil complete as per IS-396 of 1953 using super enamelled copper wire of same gauge for coil against item No. 130

Supply only ball bearing (drive and non dirve end) against item No. 130

Supply only electrodynamically balanced bronze impeller against item No. 130

Supply only Impeller Key against item No. 130

Supply only Water Seal against item No. 130

Supply only Gunmetal bush against item No. 130

Supply only Flange drilled of suitable size with nuts ,and washers including rubber gasket against item No. 130

Repairs to electric driven pump set 2.0 HP capacity including removing from the foundation dismantling ,taking out old unserviceable spares and refixing the same after repair and replacement of spares on the existing position for complete all as specified and directed by Engineer in Charge (Note: Rewinding and supply of Spares will be paid under relevant items here in after) Make : Kirloskar/ Ventura/ Suguna/ Tulu

Rewinding of motor stator coil complete as per IS-396 of 1953 using super enamelled copper wire of same gauge for coil against item No. 138

Supply only ball bearing (drive and non dirve end) against item No. 138

Supply only electrodynamically balanced bronze impeller against item No. 138

Supply only Gunmetal bush against item No. 138

Repairs to electric driven pump set 3.0 HP capacity including removing from the foundation dismantling ,taking out old unserviceable spares and refixing the same after repair and replacement of spares on the existing position for complete all as specified and directed by Engineer in Charge (Note: Rewinding and supply of Spares will be paid under relevant items here in after) Make : Kirloskar/ Ventura/ Suguna/ Tulu

Rewinding of motor stator coil complete as per IS-396 of 1953 using super enamelled copper wire of same gauge for coil against item No. 143

Supply only ball bearing (drive and non dirve end) against item No. 143

Supply only electrodynamically balanced bronze impeller against item No. 143

Supply only Cooling fan blade against item No. 143

Supply only Cooling fan cover with suitable screws against item No. 143

Supply only Gunmetal bush against item No. 143

Supply only Flange drilled of suitable size with nuts ,and washers including rubber gasket against item No. 143

Supply only Terminal box with terminal connector against item No. 143

Supply only Shaft mild steel against Item No. 143

Supply only Gland cup with bolts and nuts against item No. 143

Repairs to electric driven pump set 7.5 HP capacity including removing from the foundation dismantling ,taking out old unserviceable spares and refixing the same after repair and replacement of spares on the existing position for complete all as specified and directed by Engineer in Charge (Note: Rewinding and supply of Spares will be paid under relevant items here in after) Make: Kirloskar/ Ventura/ Suguna/ Tulu

Rewinding of motor stator coil complete as per IS-396 of 1953 using super enamelled copper wire of same gauge for coil against item No. 154

Supply only ball bearing (drive and non dirve end) against item No. 154

Supply only electrodynamically balanced bronze impeller against item No. 154

Supply only Gunmetal bush against item No. 154

Repairs to electric driven pump set 7.5 HP capacity including removing from the foundation dismantling ,taking out old unserviceable spares and refixing the same after repair and replacement of spares on the existing position for complete all as specified and directed by Engineer in Charge (Note: Rewinding and supply of Spares will be paid under relevant items here in after) Make : Kirloskar/ Ventura/ Suguna/ Tulu

Rewinding of motor stator coil complete as per IS-396 of 1953 using super enamelled copper wire of same gauge for coil against item No. 159

Supply only ball bearing (drive and non dirve end) against item No. 159

Supply only electrodynamically balanced bronze impeller against item No. 159

Supply only Gunmetal bush against item No. 159

Repairs to electric driven pump set 10 HP capacity including removing from the foundation dismantling ,taking out old unserviceable spares and refixing the same after repair and replacement of spares on the existing position for complete all as specified and directed by Engineer in Charge (Note: Rewinding and supply of Spares will be paid under relevant items here in after) Make : Kirloskar/ Ventura/ Suguna/ Tulu

Rewinding of motor stator coil complete as per IS-396 of 1953 using super enamelled copper wire of same gauge for coil against item No. 164

Supply only ball bearing (drive and non dirve end) against item No. 164

Supply only Cooling fan blade PVC against item No. 164

Supply only Terminal box with terminal connector against item No. 164

Supply only Gunmetal bush against item No. 164

Supply only Gland cup with bolts and nuts against item No. 164

Supply only GI flange drilled of suitable size with nuts , and washers including rubber gasket against item No. 164

Supply only Shaft mild steel against Item No. 164

Repairs to submersible pumpset 5 HP capacity 3 Ph, 440 Volts including Lifting of pumpset from the borewell 60 mtrs deep , dismentling ,taking out old unserviceable spares and and replacement of spares and lowering into borewell after repair complete all as specified and directed by Engineer in Charge (Note: Rewinding and supply of Spares will be paid under relevant items here in after) Make : Kirloskar/ Ventura/ Suguna/ Tulu

Rewinding of motor startor coil complete using super enameled copper wire of same gauge for coil against Item No. 173

Supply only Shaft stainless steel against Item No. 173

Supply only Thrust bearing against Item No. 173

Supply only Bush GM against Item No. 173

Supply only SS Coupling mail and female against Item No. 173

Supply only Stainless steel bush against Item No. 173

Supply only Water Seal against item No. 173

Supply only Submersible cable 3 core, copper stranded 2.5 sqmm flat type against Item No. 173

Repairs to submersible pumpset 3 HP capacity 3 Ph, 440 Volts including Lifting of pumpset from the borewell 60 mtrs deep , dismentling ,taking out old unserviceable spares and and replacement of spares and lowering into borewell after repair complete all as specified and directed by Engineer in Charge (Note: Rewinding and supply of Spares will be paid under relevant items here in after)

Rewinding of motor startor coil complete using super enameled copper wire of same gauge for coil against Item No. 182

Supply only Bush GM against Item No. 182

Supply only Thrust bearing against Item No. 182

Supply only SS Coupling male and female against Item No. 182

Supply only Submersible cable 3 core, copper stranded 2.5 Sqmm flat type against Item No. 182

Supply and replacement of DOL Starter 3 phase, 440 Volts with relay range up to 10 Amps , Make : BCH

Supply and replacement of star delta starter open execution type with single phase protection and relay range from 13 – 20 Amps, 3 Phase, 440 Volts. Make: BCH/ Crompton

Supply and replacement of DOL Starter single phase, 230 Volts, 50 HZ suitable for 1 / 1.5 HP pumpset. Make : BCH

S&F in repair Ammeter size 96 mm square type, range 0 to 60 Amps and dismantling the existing unserviceable ammeter from the panel board.

S&F in repair voltmeter size 96 mm square type range 0 to 500 volts and dismantling the existing unserviceable voltmeter from the panel board

S&F CI fitting for spigot & socketed pipe up to 150 mm bore having bends 9 any type, radius and angle) tapers any type, ( Staright, bend, increasing, decreasing or double socket etc ) , Tee pieces, single branch , "y" Junction, double branch, cross ( all sockets or socket andspigot) collars, caps and plugs. complete all as specified and as directed.

S&F run lead joint for 80mm dia pipe including spun yarn complete all as specified and as directed.

S&F run lead joint for 100mm dia pipe including spun yarn complete all as specified and as directed.

M&L for taking up 100mm bore cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed by the Engineer-in-Charge

M&L for taking up 80mm bore cast iron water mains (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed by the Engineer-in-Charge

M&L for cast iron pipes 100mm bore, with spigot ends centrifugally cast, Class LA, in any length, laid in trenches complete all as specified and as directed by the Engineer-in-Charge

M&L for cast iron pipes 80mm bore, with spigot ends centrifugally cast, Class LA, in any length, laid in trenches complete all as specified and as directed by the Engineer-in-Charge

Cleaning and removing of sludge/mud from the open well 6 mtr dia and 6 mtr depth including making necessary arrangement as required and removing the mud from the site to the place as directed by the Engr-in-Charge

Cleaning and removing of sludge/mud from the Pump house UG sump 6 mtr dia and 6 mtr depth including making necessary arrangement as required and removing the mud from the site to the place as directed by the Engr-in-Charge

Cleaning and removing of sludge/mud from Shallow Well overhead 20 feet deep including making necessary arrangement as required and removing the mud from the site to the place as directed by the Engr-in-Charge.

Cleaning and removing of sludge/mud from overhead reservoir 40 feet staging, 10000 GLNS including making necessary arrangement as required and removing the mud from the site to the place as directed by the Engr-in-Charge.

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in soft/loose soil for laying UG cables, pipes etc.

Excavation in trenches not exc 1.5 mtr wide and n. exc 1.5 m depth and getting out in hard/dense soil for laying UG cables, pipes etc.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc 25 cm in any type of soil.

Removing surplus excavated materials to a distance n. exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point.

M&L for preparation of old painted surfaces of LT panels and spray painting with two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of pipe lines and accessories like pump and motor along with panels of pump house and spray painting with two coats of synthetic enamel paint complete all as specified and directed.

Supply and spread fine river sand in trenches for cable cushioning on top and bottom of cable as specified.for cable protection complete all as specified and directed. (Note: Only punned thickness of river sand shall be measured)

Supply only bricks, common burnt clay building bricks, subclass `B’ designation 75, old size , complete all as specified and directed.

S&F GI pipe light grade of size 40mm dia for protection of UG cable on walls/under floors/road crossings/in trenches including taking down old unserviceable earthing GI pipe for taking into credit complete all as specified and as directed by the Engineer-in-Charge complete. Make : Tata/Zindal/Zenith

S&F GI pipe light grade of size 50mm dia for protection of UG cable on walls/under floors/road crossings/in trenches including taking down old unserviceable earthing GI pipe for taking into credit complete all as specified and as directed by the Engineer-in-Charge complete. Make : Tata/Zindal/Zenith

S&F GI pipe light grade of size 80mm dia for protection of UG cable on walls/under floors/road crossings/in trenches including taking down old unserviceable earthing GI pipe for taking into credit complete all as specified and as directed by the Engineer-in-Charge complete. Make : Tata/Zindal/Zenith

S&F GI pipe light grade of size 100mm dia for protection of UG cable on walls/under floors/road crossings/in trenches including taking down old unserviceable earthing GI pipe for taking into credit complete all as specified and as directed by the Engineer-in-Charge complete. Make : Tata/Zindal/Zenith

Supply and lay in trenches, fixed to wall / pole/ tray etc UG cable XLPE insulated armoured heavy duty electric UG cable with aluminum conductor 1100 volts grade of cross sectional area of 4core 10 Sqmm size all as specified and as directed. (Make : Finolex/Plaza/Havells/NICCO)

All as per Sl item no. above but of size 2 Core 10 Sqmm

All as per Sl item no. above but of size 2 Core 16 Sqmm

All as per Sl item no. above but of size 4 Core 16 Sqmm

All as per Sl item no. above but of size 3 .5 Core 25 Sqmm

All as per Sl item no. above but of size 3 .5 Core 50 Sqmm

All as per Sl item no. above but of size 3 .5 Core 70 Sqmm

All as per Sl item no. above but of size 3 .5 Core 95 Sqmm

All as per Sl item no. above but of size 3 .5 Core 120 Sqmm

All as per Sl item no. above but of size 3.5 Core 150 Sqmm

All as per Sl item no. above but of size 3.5 Core 185 Sqmm

Disconnecting taking out from trenches / pole out live LT UG cable of size as mentioned under Items above and taking old unserviceable LT UG into credit complete all as specified and as directed by the Engineer-in-Charge complete. Note : Excavation and earth work will be measured and paid separately.

M&L for earthing complete with galvanised steel earth plate electrode 60cm×60cm× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised steel earth wire 4mm dia as earthing lead by means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate No.3 connected to earthing test point,including 20 mm GI pipe (Medium grade) for watering and 40 mm GI pipe (Medium grade) for protection of earth strip and etc.. including testing on completion ,PCC chambers in PCC1:3:6 type C1, RCC M25 type cover slab 50mm thick with 8mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle GI funnel & wiremesh ,funnel,lugs and charcoal,salt etc all as applicable including taking down old unserviceable earthing complete for taking into credit complete all as specified and as directed by the Engineer-in-Chargecomplete all as specified and as directed by the Engineer-in-Charge Note:-(i) The rates quoted is inclusive of 32x6mm GI strip earth conductor upto a length of 7.5m from the earth pit.

Supply and lay earth continuity conductor or main earting lead fixed to wall on batten or recess or burried in ground or drawn in conduit / conduit pipe or fixed to poles or any other indicted situation for loop earthing etc of galvanised steel earth wire 4mm dia including taking down old unserviceable GI earth wire complete all as specified and as directed.

M&L for test point terminal box made out of Gun metal or Phosphorous bronze of size 75x75x25mm drilled and screwed including 3 Nos. 8mm dia 25mm long hex head screws including taking down old unserviceable test point terminal box for taking into credit complete all as specified and as directed by the Engineer-in-Charge .

M&L for aluminium strip of 25x 3.15mm fixed with screws/ clamps / insulators for roof conductors and down conductors above ground level complete including taking down old unserviceable Aluminium strip for taking into credit complete all as specified and as directed by the Engineer-in-Charge.

S&F in repair MCCB three pole 415 volts 50 Hz , 63 amps, with rupturing capacity 16 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge . Make : Havells/ABB/Standard/Legrand

S&F in repair MCCB three pole 415 volts 50 Hz , 100 amps, with rupturing capacity 16 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge . Make : Havells/ABB/Standard/Legrand

S&F in repair MCCB four pole 415 volts 50 Hz , 160 amps, with rupturing capacity 36 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge . Make : Havells/ABB/Standard/Legrand

S&F in repair MCCB four pole 415 volts 50 Hz , 200 amps, with rupturing capacity 36 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge . .(Make : Havells/ABB/Standard/Legrand)

S&F in repair MCCB four pole 415 volts 50 Hz , 250 amps, with rupturing capacity 36 KA complete all as specified and as directed including taking down old unserviceable MCCB for taking into credit complete all as specified and as directed by the Engineer-in-Charge . Make : Havells/ABB/Standard/Legrand

Cutting the road / hard standing for laying of pipes / cable in trenches and making good with PCC 1 :2 :4 Type B1 complete and painting with black paint , if necessary, to match with existing bituminous road colour complete all as specified and as directed by the Engineer-in-Charge .

M&L for painting the Panel boards/DB Boxes/covers/DG Set/Accoustic Enclosures as required at site after scraping out completely the old paint with one coat of redoxide primer and two coats of synthetic enammel paint including carrying out minor welding works if reqired as directed by the Engineer in charge NOTE:Colour of paint shall be decided by the Engineer-in-charge.

M&L for plain cement concrete for foundation of type C1 20 mm graded aggregate 1:3:6 complete all as specified and directed by Engineer in Charge

S&F pole mounting junction box (looping box) for street light with outside dimension 230 x 170 x 105 mm comprising of PVC connector and one MCB SP 6 amps including mounting arrangement . Make- Sintex/Hansel/Spelsbary

M&L for straight through joint (epoxy) for underground cable including joint kit for making joint suitable for aluminium conductor cable of size 2 core 16 to 35 sqmm or 3 core 16 to 25 sqmm or 4 core 10 to 16 sqmm Note :- Excavation, returning filling in removing, sand cushioning, brick etc shall be measured and paid separately under respective items of work. Make : Densom/M- Seal

All as per Sl item no. above but of size 3 ½ core / 4 core 25 to 35 sqmm

All as per Sl item no. above but of size 3 ½ core 50/70 sqmm

All as per Sl item no. above but of size 3 ½ core 95/185 sqmm

Writing letters (Block, Roman, Italic or Indian) with thick paint ,stand out boldly and solidly without showing signs of brush marks, if necessary, repainted until the desired result is obtained , 10 to 15 cm height and painting with contrasting colour in the background of letter complete as directed. NOTE:Colour of paint shall be decided by the Engg-in-charge.

S&F danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size, , complete all as specified and as directed by the Engineer-in-Charge

S&F Synthetic Insulating Mat of size 2m x 1m x 19mm and removing old unserviceable mat from the site all as specified and directed by Engineer-in-charge.

Disconnecting and removing the unserviceable secondary battery from the battery compartment and provision of fully charged secondery battery 12 Volts, 220 AH tubular battery complete all as specified and directed.

S&F new battery box of PVC material, water proof and heat dissipative, PVC cable tube suitable for existing battery including removal of old unserviceable one complete all as specified and directed.

Servicing of battery of solar light and drain out diluted electrolite and provision of electrolite of density specified gravity and initial charging of the battery of 72 Hrs and refixing complete all as specified and direcrted

Taking down old unserviceable street light / post top lantern / security light/Bollards fitting luminaires from pole/Bldg/gate, of any type / capacity and removing to store complete all as specfied and directed by Engineer - in - Charge

S&F LED Street Light Fitting with aluminium PDC housing and toughened glass cover with IP 66 Protection 45 Watt including all accessories and wiring including dismantiling unserviceable fittings Make : C&S Model No LTESS18X2.5HPLED /LS or equivalent to Surya/Bajaj/Philips/Havells

S&F LED Flood Light Fitting with high luminuos efficiancy IP 65 Protected with front toughened glass of capacity 120 Watt including all accessories and wiring including dismantiling of old unserviceable fitting Make : C&S Model No LTEFI120WHPLED or equivalent to Surya/Bajaj/Philips/Havells

S&F LED Flood Light Fitting with high luminuos efficiancy IP 65 Protected with front toughened glass of capacity 50 Watt including all accessories and wiring including dismantiling of old unserviceable fitting Make : C&S Model No LTEFI50WHPLED or equivalent to Surya/Bajaj/Philips/Havells

S&F Post Lentern Light 30 W Fitting with high luminuos efficiancy IP 65 Protected with front toughened glass of capacity 50 Watt including all accessories and wiring including dismantiling of old unserviceable fitting Make : C&S Model No LGLC30WHPLED/WF150WHPLED or equivalent to Surya/Bajaj/Philips/Havells

S&F new GI bracket made out of 40mm dia GI pipe length 1.2 mtr long bent to an angle 135 degree including removing corroded GI bracket along with clamps, bolts, nuts etc from pole complete all as specified.

S&F looping in box made out of PVC with internal size 150x150x80mm comprising of PVC connector and porcelain fuse cut out 10 amps including mounting arrangements including removing the existing defective looping box Make: Sintex or equivalent as approved by AGE(I)

S&F PVC box of with internal size 230x110x100mm comprising 4 pole loop in and 4 pole out connection 10 Amps fuse cut out. Make: Sintex or equivalent as approved by AGE(I)

S&F looping in box PVC box of make sintex with internal size 240x150x100mm comprising of PVC connector and porcelain fuse cut out 32 Amp including mounting arrangements including removing the existing defective looping box Make: Sintex or equivalent as approved by AGE(I)

S&F MCCB 4Pole 50 Hz 415 volts, 63 amps, rupturing capacity 25 KA, fixed type including taking down old unserviceable MCCB. Make: L&T/Standard/Havells.

S&F MCCB 415 volts 100 Amps, breaking capacity 25 KA TP, fixed type including taking down old unserviceable MCCB. Make: L&T/Standard/Havells.

S&F Iron clad of sheet metal TP fused and neutral link 415 volts, 63 Amps capacity including taking down old unserviceable Iron clad Make: L&T/Standard/Havells.

S&F Iron clad of sheet metal TP fused and neutral link 415 volts, 100 Amps capacity including taking down old unserviceable Iron clad Make: L&T/Standard/Havells.

S&F PVC insulated two single core 2.5 sqmm copper conductor and one run of 1.5 sqmm multistranded copper conductor as earth continuity conductor drawn through and including 15mm dia PVC conduit and accessories Note : (i)Two run 2.5 Sqmm of single core, one run of 2.5 sqmm earth conductor and PVC conduit will be measured as one RM.

Cleaning of concrete pole 9 mtr long and applying two coats of cement wash on concreate poles and applying two coats of aluminium paint on mild steel brackets,cross arms,clamps etc including preperation.

M&L for PCC (1:3:6) type C2 (using 40mm graded crushed stone aggregate) as in foundation/ copping of pole including necessory form work complete all as specified and directed.

Demolition of old unserviceable copping/part of pole foundation etc complete all as specified and directed

Relaying of old serviceable cable in trenches and connect the cable to panel,DB,Pole and electrical motor. Note: Excavation and earth work will be measured and paid seperately.

S&F Timer Switch Astronomical type 215 volts single phase of 32 Amps rating with TP contactor incl one Toggle switch for Auto, off and manual function and inmcomming 40 Amps MCB SPN internaly pre wired complete and fitted inside steel enclosure all as per site requirement and directed by Engr - in - Charge. Make:Legrand or equivalent in Havells, L&T.

Taking down solar light fittings incl complete dismantling, checking, replacement of unserviceable spares and components as required and make the light fittings functional to give rated illumination incl cleaning the Solar cell panel/collector and refixing the same after repair/replacement of spare components complete with necessory electrical connection with suitable size of wire required length complete all as specified and as directed and refixing re-connecting the same in existing position after carrying out necessory repair all as directed . (replacement of accessories shall be measured and paid seperately)

S&F solar plate as per existing suitable for 1 x 30 Watt complete all as specified and directed.

S&F PCB as per existing suitable for 1x11watt solar light complete all as specified and directed.

S&F solar light fitting as per existing, complete all as specified and directed.

S&F acrylic cover for solar light fitting complete all as specified and directed.

S&F PVC insulated and sheathed stranded copper conductor 1.5 sqmm two single core for connection of street light fitting all as directed by Engr-in-Charge.

S&F battery brass terminal complete all as specified and directed.

M&L for battery checking by cleaning the terminal post, adding the petrolium jelly / grease, connecting the wires etc, complete all as directed by Engr-in-Charge.

Supply only Distilled water good quality for solar light battery complete all as specified & directed.

S&F battery 12 V -60/62/200AH tubular type with all accessories complete all as specified and directed. Make: AMARON, EXIDE, TATA

M&L for MS Sheet thickness of 2mm and framed work with ms flat iron 40 x 5 mm in braces with locking arrangements using ms staple and suitable hinges fixed independely to solar light battery box by welding all as specified and directed by Engr-in-Charge.

M&L for painting of solar light pole including frame and battery box cover complete with two coats of synthetic enamel paint of approved colour including preperation old painted surface by removing of old paints, rust etc and painting /marking of pole No all as directed by Engr-in Charge.

Cleaning throuhghly and removing dust/scalling of RCC pole and appying two coats of extere weather proof emulsion painting over a acoat of white primer, bottom 1.2 Mtr in white colou nd 1.2Mtr in navy blue colour for 0.9 Mtr high RCC poles, complete all as specified and directed.

Cleaning throuhghly and removing dust/scalling of RCC pole and appying two coats of extere weather proof emulsion painting over a acoat of white primer, bottom 1.2 Mtr in white colou nd 1.2Mtr in navy blue colour for 12.0 Mtr high RCC poles, complete all as specified and directed.

S VENKATESAN