Tender for the Work of Conversion of Existing Overhead 11KV Industry Feeder, 11KV Cable Industry Feeder and 33KV Unichem Feeder to Underground System and Providing New 11KV Feeder at Pilerne Industrial Estate, Pilerne Under Sub Division II, Porvorim.

Amount

COST OF MATERIAL

Supply of 11KV , 3 core 300 sq.mm. A2XFY Al. armoured XLPE cable through conventional open trenching method in any type of soil including hard laterite.

Supply of 3 core, 95 sq.mm Aluminium, XLPE insulated armoured, 11KV (earthed neutral) Cable for connecting to the distribution transformer centres and 11 KV HT installations and any other equipments. (from RMU to Transformer or HT Consumers)

Supply, of 2 nos of 33KV 3 core 400 Sq.mm size Aluminium conductor screened XLPE insulated galvanised flat strip armoured shielded PVC cable including jointing etc.confirming to IS 7098 or Part II amended upto date. type A2xfy

Supply of 11KV,630amps,out door,SF6 Ring Main Unit with two load break Switch and one Circuit breaker confirming to international standard and complete with fault passage indicator other accessories.

Supply of 11KV,630amps,out door,SF6 Ring Main Unit with Three load break Switch confirming to international standard and complete with fault passage indicator other accessories.

Supply of 33 KV SF6 RMU, Type RRL , NonExtensible RMU 36KV, 630A, 20KAor3sec, Outdoor, 3way, Non Extensible, Manual Operated RMU, type 8DJH36 having configuration: 3 nos Load Break Switch Feeders Cable Plugs for 33KV 3wayRMU to terminate R Feeder: (1X3CX300sqmm) 3nos

Supply of out door type end termination Raychem heat shrinkable kit for 11KV XLPE cable of size 3x300 sq.mm including sockets or lugs or connectors etc alongwith cable glands at 11KV take off gantry at 33or11KV substation and and at O/H Poles.

Supply of indoor type end termination Raychem heat shrinkable kit for 11KV XLPE cable of size 3x300 sq.mm including sockets or lugs or connectors etc alongwith cable glands at 11KV Ring Main Unit and two way on load switch (DEOS). ( 3 for each DEOS and 2 for each RMU )

Supply of termination of indoor type end termination Raychem heat shrinkable kit for 11KV XLPE cable of size 95sqmm including sockets or lugs or connectors etc alongwith cable glands at 11KV Ring Main Unit.

Supply of termination of outdoor type end termination Raychem heat shrinkable kit for 11KV XLPE cable of size 95sqmm including sockets or lugs or connectors etc alongwith cable glands at Transformer centre AB Switch

Supply of XLPE heat shrinkable straight through jointing kit for 300 sq.mm, 3 core, 11KV XLPE cable.

Supply of H.S.33 KVOutdoor Termination Kit for 3C 400 Sq mm XLPE

Supply of H.S.33 KVIndoor Termination Kit for 3C 400 Sq mm XLPE

Supply of XLPE heat shrinkable straight through jointing kit for 400 sq.mm, 3 core, 33KV XLPE cable.

Supply of Providing and laying in position cement concreate 1 2 4(1 Cement 2 coarse sand 4 graded granitic or basaltic stone agregate 40mm nominal size

Centering and shuttering including struttings,propping etc. and removal of form work for the foundation ,footing,bases of column and mass concrete

Supply and laying of RCC protective covers of size 600mm long x 250mm width and 50mm thick capable of bearing load of 135Kg. And covered with earthor sand upto depth of 0.15mts. Confirming to IS 1255 1967 at nonroad crossing.

Supply and laying of river sand for cushioning

Supply of cable route Makers

Supply of Earthing complete with earthing pipe 40mm GI class B, 2.5 mts long, perforated Pipe provided with a welded GI flat of 75x8 mm for receiving earth connections alongwith 20 kgs each salt, charcoal complete with chamber of brick masonary for switch yard. and LOAD Break switch

Supply of GI Flat 25 x 5 mm.for connecting earthing to proposed 11KV RMU ,11KV DEOS and 33KV RMU.

Supply of precast RCC hume pipe of size 150 mm with required number of collars using cement mortar 1 is to 2 for road crossing and at any other crossing as ordered for laying 300sqmm xlpe cable

Supply of precast RCC hume pipe of size 250 mm with required number of collars using cement mortar 1 isto 2 for road crossing and at any other crossing as ordered for laying 400sqmm xlpe cable

Supply of fabrication, transportation and erection of Hot dip galvanised DP structure material consisting of ISMC Channel for supporting incoming 95ssq.mm 11KV cable of size 75 x 40 x 6 mm, 2.75 mtr long, 1 piece at each transformer centre. 18.7 kgs.

Supply of Clamps (for 11 Mts RCC Poles) with 4x5or8 Nut and Bolts for DP structure material.( 2Pairs clamps and 1kg Nuts and bolts)

Supply of GI Riser Pipe 100mm, class B, for 95 sq. mm. cable support , 3.5Mts. for each DP.

Supply of GI Pipe 150 mm, class B,riser pipe for 300 sq. mm. and 400 sq.mm cable support , 5 Mts. for O/H Feeder I/L.

Supply of ACSR Raccon Conductor for Jumpering

Supply and laying of Bricks for separation of 2cables

Supply and laying of Warning tape

Work of Numbering of 11KV DEOS, 33KVRMU, 11KV RMU etc

COST OF ERECTION

Erection of 11KV , 3 core 300 sq.mm. A2XFY Al. armoured XLPE cable through conventional open trenching method in any type of soil including hard laterite.

Erection of 3 core, 95 sq.mm Aluminium, XLPE insulated armoured, 11KV (earthed neutral) Cable for connecting to the distribution transformer centres and 11 KV HT installations and any other equipments. (from RMU to Transformer or HT Consumers)

Erection of 2 nos of 33KV 3 core 400 Sq.mm size Aluminium conductor screened XLPE insulated galvanised flat strip armoured shielded PVC cable including jointing etc.confirming to IS 7098 or PartII amended uptodate. type A2xfy

Erection of 11KV,630amps,out door,SF6 Ring Main Unit with two load break Switch and one Circuit breaker confirming to international standard and complete with fault passage indicator other accessories.

Erection of 11KV,630amps,out door,SF6 Ring Main Unit with Three load break Switch confirming to international standard and complete with fault passage indicator other accessories.

Erection of 33 KV SF6 RMU, TypeRRL , NonExtensible RMU 36KV, 630A, 20KAor3sec, Outdoor, 3way, Non Extensible, Manual Operated RMU, type 8DJH36 having configuration: 3 nos Load Break Switch Feeders Cable Plugs for 33KV 3wayRMU to terminate R Feeder: (1X3CX300sqmm) 3nos

Erection of out door type end termination Raychem heat shrinkable kit for 11KV XLPE cable of size 3x300 sq.mm including sockets or lugs or connectors etc alongwith cable glands at 11KV take off gantry at 33or11KV substation and and at O/H Poles.

Erection of indoor type end termination Raychem heat shrinkable kit for 11KV XLPE cable of size 3x300 sq.mm including sockets or lugs or connectors etc alongwith cable glands at 11KV Ring Main Unit and two way on load switch (DEOS). ( 3 for each DEOS and 2 for each RMU)

Erection, testing and commissioning of termination of indoor type end termination Raychem heat shrinkable kit for 11KV XLPE cable of size 95sqmm including sockets or lugs or connectors etc alongwith cable glands at 11KV Ring Main Unit.

Erection of termination of outdoor type end termination Raychem heat shrinkable kit for 11KV XLPE cable of size 95sqmm including sockets or lugs or connectors etc alongwith cable glands at Transformer centre AB Switch

Erection of XLPE heat shrinkable straight through jointing kit for 300 sq.mm, 3 core, 11KV XLPE cable.

Erection of H.S.33 KVOutdoor Termination Kit for 3C 400 Sq mm XLPE

Erection of H.S.33 KVIndoor Termination Kit for 3C 400 Sq mm XLPE

Erection, testing and commissioning of XLPE heat shrinkable straight through jointing kit for 400 sq.mm, 3 core, 33KV XLPE cable.

Excavation of soil(Hard Rock) by mechanical means or manual means

Erection of Filling of available excavated earth (excluding rockorstones in trench, plinth, sides, foundations etc. in layer not exceeding 0.2mts. Depth, consolidating each deposited layer by ramming and watering lead up to 50 mts.

Disposal of surplus excavated soil or material by mechanical transportation and including loading and unloading, stacking, levelling as directed within a distance of 2500 mts.

Installing of cable route Makers

Erection of Earthing complete with earthing pipe 40mm GI class B, 2.5 mts long, perforated Pipe provided with a welded GI flat of 75x8 mm for receiving earth connections alongwith 20 kgs each salt, charcoal complete with chamber of brick masonary for switch yard. and LOAD Break switch

Erection of GI Flat 25 x 5 mm.for connecting earthing to proposed 11KV RMU ,11KV DEOS and 33KV RMU.

Erection of precast RCC hume pipe of size 150 mm with required number of collars using cement mortar 1 isto 2 for road crossing and at any other crossing as ordered for laying 300sqmm xlpe cable

Erection of precast RCC hume pipe of size 250 mm with required number of collars using cement mortar 1isto 2 for road crossing and at any other crossing as ordered for laying 400sqmm xlpe cable

Erection of Hot dip galvanised DP structure material consisting of ISMC Channel for supporting incoming 95sq.mm 11KV cable of size 75 x 40 x 6 mm, 2.75 mtr long, 1 piece at each transformer centre. 18.7 kgs.

Erection of Clamps (for 11 Mts RCC Poles) with 4x5or8 Nut and Bolts for DP structure material.( 2Pairs clamps and 1kg Nuts and bolts)

Erection of GI Riser Pipe 100mm, class B, for 95 sq. mm. cable support , 3.5Mts. for each DP.

GI Pipe 150 mm, class B,riser pipe for 300 sq. mm. and 400 sq.mm cable support , 5 Mts. for O/H Feeder I/L.

Stringing of ACSR Raccon Conductor for Jumpering

Dismentaling of 11KV overhead conductor , poles, Pin insulator with GI pin, Disc insulator with MP, V shape channel with clamps, cutpoint channel with clamps,stay sets

LOKESH ENTERPRISES