Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 CrAdmitted-Finance | ₹1.5 Cr | L1 | Admitted-Finance |
| 2 | L2₹1.5 Cr+₹3.9 L (2.68%)Admitted-Finance | ₹1.5 Cr+₹3.9 L (2.68%) | L2 | Admitted-Finance |
| 3 | L3₹1.5 Cr+₹5.9 L (4.03%)Admitted-Finance | ₹1.5 Cr+₹5.9 L (4.03%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Anubhavi Constructions L3 | HARVITEC ENTERPRISES PVT LTD L2 | B.Dayal L1 |
|---|---|---|---|---|---|---|
| 0.00Electrical Works. | ||||||
| 1.00 | Supply and laying of 300 sq. mm 3 core standered aluminium conductor XLPE (Cross linkedpolyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. (Havells/Gloster/Grandlay/Polycab or as make approved by Engineer-in-charge. | 2,914 | Mtr. | 3,245 ₹94,55,930 Lowest | 3,500 ₹1,01,99,000 | 3,279 ₹95,55,006 |
| 2.00 | Supply and erection of steel tubular pole 410-SP-55 11M long. 227 Kg complete including foundation work with 1/6th of overall length of pole below ground level with 45cm dia cement concrete with 45cm above the ground leval. The foundation of underground will not be less than 20cm thick layers of cement concrete in the ration of 1:3:6 (Cement : coarse sand : over burnt brick ballast/stone ballast), The brick ballast/stone ballast will be used of 1.25cm size with stone pad of 30x30x7.5cm at the base. as per direction of E/I of work/site including all T&P, men and material for proper completion of work. ( The Pole Should be galvanized in first section as per technical specification of PVVNL.) | 24 | Nos. | 35,400 ₹8,49,600 | 27,000 ₹6,48,000 Lowest | 29,500 ₹7,08,000 |
| 3.00 | Supply & fixing MS Top channel 125x50mmx3200mm long ( 10.70 kg/M) including cost of 02 Nos. clamp with nut & bolts, cost of material, men and T&P. | 12 | Nos. | 2,360 ₹28,320 Lowest | 3,550 ₹42,600 | 3,393 ₹40,716 |
| 4.00 | Supply & fixing MS Bottom channel 100x50mmx2600mm long(7.6 kg/m) including cost of 02 Nos. clamp with nut & bolts, cost of material, men and T&P. | 24 | Nos. | 2,360 ₹56,640 | 2,150 ₹51,600 Lowest | 2,413 ₹57,912 |
| 5.00 | Supply & fixing MS angle iron 65x65x6mm bracing with 4 clamp suitable for double pole structure including cost of 04 Nos. clamp with nut & bolts, cost of material, men and T&P. | 12 | Nos. | 590 ₹7,080 Lowest | 4,150 ₹49,800 | 2,583 ₹30,996 |
| 6.00 | Supply & fixing 33 KV Pin Insulator with pin on ST pole including cost of material, men and T&P. | 96 | Nos. | 590 ₹56,640 | 800 ₹76,800 | 530 ₹50,880 Lowest |
| 7.00 | Supply & fixing Danger board fabricated from 10 guage M.S. sheet including cost of fixing clamp with nut & bolts, cost of material, men and T&P. | 12 | Nos. | 236 ₹2,832 | 220 ₹2,640 | 118 ₹1,416 Lowest |
| 8.00 | Supply & Erection of Number plate with clamp for 33 KV including cost of clamp with nut & bolts, cost of material, men and T&P. | 12 | Nos. | 236 ₹2,832 | 220 ₹2,640 | 118 ₹1,416 Lowest |
| 9.00 | Supply & fixing anti climbing device/GI barbed wire on ST pole including cost of all material,men and T&P. as per direction of engineer in charge.(2 Kg for each pole) | 48 | Kg. | 118 ₹5,664 Lowest | 120 ₹5,760 | 152 ₹7,296 |
Tender Value
₹1.8 Cr
EMD Value
₹3.5 L
Closing Date
5 Jun 2023, 6:00 pmClosed
PGM(R) HO Kanpur
Office of the PGM(R) UPSIDA HO Kanpur
Providing 33 KV Line for 33/11 KV 1X10 MVA Sub station under Atal Industrial Infrastructure Mission at IA Babrala (Sambhal)
2023_SIDC_801790_1
ED-II(94) Date 10.05.2023
Open Tender
Electrical Works
Item Rate
150 days
Sambhal
As per technical Bid documents
2 documents required · 2 mandatory
₹5,032
FC
₹3.5 L
13 Jun 2023
15 May 2023
6 Jun 2023
15 May 2023
5 Jun 2023
15 May 2023
Amount
Electrical Works.
Supply and laying of 300 sq. mm 3 core standered aluminium conductor XLPE (Cross linkedpolyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level over a cushion of 100 mm thick fine river sand all around and protected with well burnt bricks on sides and on top put across. The armouring of cable shall be properly connected with earth conductor by clamps etc. (Havells/Gloster/Grandlay/Polycab or as make approved by Engineer-in-charge.
Supply and erection of steel tubular pole 410-SP-55 11M long. 227 Kg complete including foundation work with 1/6th of overall length of pole below ground level with 45cm dia cement concrete with 45cm above the ground leval. The foundation of underground will not be less than 20cm thick layers of cement concrete in the ration of 1:3:6 (Cement : coarse sand : over burnt brick ballast/stone ballast), The brick ballast/stone ballast will be used of 1.25cm size with stone pad of 30x30x7.5cm at the base. as per direction of E/I of work/site including all T&P, men and material for proper completion of work. ( The Pole Should be galvanized in first section as per technical specification of PVVNL.)
Supply & fixing MS Top channel 125x50mmx3200mm long ( 10.70 kg/M) including cost of 02 Nos. clamp with nut & bolts, cost of material, men and T&P.
Supply & fixing MS Bottom channel 100x50mmx2600mm long(7.6 kg/m) including cost of 02 Nos. clamp with nut & bolts, cost of material, men and T&P.
Supply & fixing MS angle iron 65x65x6mm bracing with 4 clamp suitable for double pole structure including cost of 04 Nos. clamp with nut & bolts, cost of material, men and T&P.
Supply & fixing 33 KV Pin Insulator with pin on ST pole including cost of material, men and T&P.
Supply & fixing Danger board fabricated from 10 guage M.S. sheet including cost of fixing clamp with nut & bolts, cost of material, men and T&P.
Supply & Erection of Number plate with clamp for 33 KV including cost of clamp with nut & bolts, cost of material, men and T&P.
Supply & fixing anti climbing device/GI barbed wire on ST pole including cost of all material,men and T&P. as per direction of engineer in charge.(2 Kg for each pole)
Supply and erection of stay of HT lines for ST pole with GI anchor plate (152x152x6mm) stay rod (16mm dia x 1.85 m long) GI stay below (16mm dia rod , thriple, double stay tightener, stay insulator, clampas & stay wire (GS 7/3 .15mm) including grouting in 1:4:8 ratio of cement corcente using coars sand, over burnt brick ballast as per direction of engineer in charg complete in all respect as per technical specification of PVVNL approved by E/I
Supply & fixing 11 KV Disc insulator B&S type suitable for dog conductorincluding cost of all material, men and T&P.
Supply & fixing disc fitting suitable for dog conductor made from LM-6 material including cost of all material, men and T&P.
Supply & fixing PG clamp suitable for dog conductor made from LM-6 material including cost of all material, men and T&P.
Supply & Laying of 150 mm dia GI pipe B class for climbing up the cable from ground to overhead line including all acessories material,labour and T&P required for proper completion.(Technical specification & make shall be approved by E/I)
P/L MS Steel pipe 200 mm dia (by trenchless method) made out of steel plate as per IS 2062 grade Fe-400 6mm thic as per IS 3589 installation of pipe by horizental boaring method.The pipe will be laid at depth of 3M including all acessories material,labour and T&P required as per direction of Engineer in charge.(Technical specification & make shall be approved by E/I)
Supply & Laying of 160 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750-1000mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.(Technical specification & make shall be approved by E/I)
Supply & Laying of 160 mm HDPE pipe (by manual trenchless horizental boaring) ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (750-1000mm below ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.(Technical specification & make shall be approved by E/I)
Supply & fixing 33 KV heat shrinkable type Straight through jointing kit suitable for 3x300 sq.mm XLPE Cable complete in all respect including cost of all material,men and T&P.(Technical specification of make shall be approved by E/I)
Supply & fixing 33 KV heat shrinkable type outdoor Jointing kit suitable for 3x300 sq.mm XLPE Cable complete in all respect including cost of all material,men and T&P.(Technical specification & make shall be approved by E/I)
Supply & fixing 33 KV heat shrinkable type indoor Jointing kit suitable for 3x300 sq.mm XLPE Cable complete in all respect including cost of all material,men and T&P.(Technical specification & make shall be approved by E/I)
Supplying and erection of single piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required.
Supply,sagging,jointing and binding of ACSR Dog conductor including cost of aluminium tap,binding wire and jointing sleaves etc. complete in all respect including men & material,T&P proper completion of work as per direction of engineer.(Technical specification & make shall be approved by E/I)
Supply and burying of 40mm dia x4.5 meters long G.I. pipe vertically for earthing having 12mm dia. Holes speced 75mm apart drilled upto 2 meter from the bottom complete with earthing lead of no. 6 to 8 SWG G.I. pipe upto apron (and from appron to switch board, the cost of G.I. wire and pipe will be extra) upto switch board, 30cm squre C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at last 150mm thick alround etc. as per direction of Engineer -in-charge complete in all respect as per drawing.
Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.
HARVITEC ENTERPRISES PVT LTD
Anubhavi Constructions
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.69 MB
BOQ_1341890.xls
BOQ • 0.29 MB
TenderDocumentOFUPSIDA.pdf
Tender Documents • 1.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .