8269 REPAIR TO DRAIN, FENCING, BOUNDARY WALL, HARDSTANDING, PATH GATE, MISC B/R AND MAINT WORKS OF PETTY NATURE BLDGS AT MIL STN SHAHJAHANPUR UNDER GE (E) BAREILLY.

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level).

S&F glass dividing strip 3mm thick and 38mm wide in flooring complete all as specified and direcetd.

M&L for 100mm thick cement concrete type B-1 1:2:4 (20 mm graded stone aggregate) laid in panels as in hardstanding etc and finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade 'A' , 100 mm thickness of concrete slab complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2, using 40 mm graded stone aggregate as in surface channels and base of drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

M&L for cement concrete (1:5:10) type E-2 as in foundation filling and mass concrete complete all as specified and directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar except brick complete all as specified and as directed.

M&L for 22 mm thick rubber moulded chequered cement concrete coloured tiles area of each tile exc 0.06 sqm but n.exc 0.12 Sqm, set & jointed in neat cement slurry and pointed with cement & pigment to match the shase of tiles in floors over and incl 20 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.

S&F 0.80 mm thick mild steel plain black sheet in hearths, covering to door chowkhats (frames) chullah hoods, water tanks , water troughs, ducts, urinal trough and funnels etc, cut to size, edge beaded if directed, holes punched, including round headed screws,clout nails or rivets and fixed to wood or steel members, etc with plain 40 mm lap joints or welded /riveted seams including bending, turning up, mitred angles, stopped ends, outlets etc as required

M&L applying 2 coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed.

M&L applying 2 coats of synthetic enamel paints on old steel surfaces over a coat of red oxide primer including surface preparation over 10 cm width and girth complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion and making good disturbed ground post embedded in concrete, brick work, masonry etc complete all as specified and directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50m and making good sufrace in soft/loose soil complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type C-2 using 40mm graded crushed stone aggregate as in foundation/mass concrete complete all as specified.

S&F M S Posts and struts in fencing (any size of angle) mm including cutting tops to shapes as directed including driling holes for bolting of MS flat iron in horizontal, vertical & diagnal faces of each pannel to be intertwined with Chain link fencing, and fixed to posts with MS nut bolts and washers, wind ties for sign board posts and struts, and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

S&F post and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting and riveting etc and similar work except steel complete all as specified and directed. Note:- Post/ Struts are obtain from Srl item No. 24 here in before

Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 10 cm but not exc 15 cm and 15mm dia complete all as specified and directed.

Fixing only in repairs chain link M S galvanised fencing (IS-272) mesh as required but weight of mesh not exc 4.0 kg/sqm complete all as specified and directed. (Note: Weight of chain link per Sqm shall be finalised through BOO)

M&L for 10mm dia and over mild steel TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

S&F in repairs Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rail straining bolts including securing or tying at crossings with and provisons of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering , running rails and guides) and hanging also fastening and fixing complete of Fe 410 W (Gde E-250) quality 'B' complete all as specified and directed.

M&L in repairs 6mm thick Asbestos Cement, one piece plain angular ridge in roof fixed with L Type or J type or crancked hook bolt etc.complete all as specified and directed.

M&L in repairs 6mm thick Asbestos Cement, Corrugated or Semi corrugated sheets in roof, wall fixed with L Type or J type or crancked hook bolt etc.complete all as specified and directed.

S&F in repairs pre-painted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 55- Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repairs pre-painted galvalume aluminium zinc coated GI based plaint steel sheet 0.50 mm thick of an colour having tensile strength of 55- Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire stapples in door and steel window etc complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed..

S&F in repair fancy type stainless steel towel rack size 600mm including a pair of brass bracket etc complete all as specified and directed. Make : Hindware or parryware or equivalent as approved by GE.

S&F in repairs stainless steel tubular towel ring square shape including a pair of CP brass brackets complete all as specified and directed.

S&F in repairs fancy type 150mm size square brass CP Shower rose all as specied and directed.

S&F in repairs Brass chromium plated wall mixer 2 in 1, 15mm for mixing hot and cold water screwed down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. Model : Cera / parry or equivalent of parryware.

S&F in repair Brass Aluminium Mortice lock 4 lever , size 75mm as all specified and directed

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 3, universal type, suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair door closer aluminium (Die cast) body hydraulically regulated, designation No 2, universal type, suitable foor door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed etc complete all as specified and directed.

S&F in repair double action floor spring hydraulically regualted made up of minimmum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless stell cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed

S&F in repairs brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in repair for 32mm bore complete all as specified and directed.

S&F in repairs service tank lid/cover (MS tasla) of size 0.45m dia and 0.2m height made with 0.9mm thick GI sheet shaped into hollow semi sphere fixed to over head PVC service tank of 250 ltrs to 1000 ltrs capacity including necessary nut, bolts, washers and locking arrangement complete all as specified and directed.

S&F in repair 15mm bore angle stop valve of PTMT any colour high prssure screwed for iron pipe and fixed all as specified (minimum wt. 90gms).

S&F in repair CP towel rail 20mm dia, D Type 450/600 mm long between flanges etc complete all as specified and directed.

S&F in repairs brass chromium plated mixer 15mm for mixing hot and cold water screwed down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed.

S&F in repairs stainless steel plate rack 0.8mm thick of capacity carrying minimum 10 plates and minimum size 90 x 60 x 25 cm complete all as specified and directed.

S&F in repairs Glass shelf 500x125mm complete all as specified and directed. (Make : Prayag Cat Part No BEA 45) or equivalent as approved by GE.

S&F in repairs of ISI marked waste coupling 32mm /40mm dia of brass chromium plated for glazed ware sink, basins etc with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and directed.

S&F in repairs waste coupling of PTMT (half or full threaded). (Minimum weight 32 mm - 45 gms/40mm-60 gms) of 32 mm dia pipe etc complete all as specified and directed.

S&F in repairs liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms).

S&F in repair 32mm dia PVC waste pipe for sinks/basin complete all as specified and directed.

S&F in repair 40mm dia PVC waste pipe for sinks/basin and complete all specified and directed .

S&F in repairs grating doom 125mm dia of PTMT (Minimum weight 40 gms) with waste hole.

S&F in repairs PVC connection pipe 450mm long with PTMT nuts suitable for 15mm dia pipe etc complete all as specified and directed.

S&F in repairs PVC connection pipe 600mm long with PTMT nuts suitable for 15mm dia pipe etc all as specified and directed.

S&F in repairs ISI marked fancy type Pillar tap of 15mm bore, cast copper alloy with capstan heads chromium plated screwed down , high pressure with long screwed shanks and fly nuts , screwed for iron pipe complete all as specified and directed.

S&F in repair 15mm bore fancy type chromium plated Bib taps cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair brass bib taps 15mm bore dia, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete.

S&F in repairs white Toilet paper holder of brass chromium plated fixed to walls with chromium plated brass screws complete all as specified and directed .

S&F in repair 25mm dia fancy CP/aluminium coloured curtain rod with bracket including all necessary fittings such as knobs etc complete all as specified and directed.

S&F in repair 25mm dia fancy stainless steel coloured curtain rod with bracket including all necessary fittings such as knobs etc complete all as specified and directed.

S&F in repairs chromium plated mild steel grating suitable for 75mm pipe NT/FT complete all as specified and directed.

S&F in repairs 15mm dia angle valve cast copper alloy , fancy type chromium plated with long shank and cup (concealed type) including making surface good with cement mortar 1:4 complete all as specified and directed.

S&F in repairs for plastic water closet seat, black , closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repair Hasp and staple, safety type , brass with mild steel hinge pin including bolt to hinge plate and fixed with screws of 75mm complete all as specified and directed.

S&F in repairs 40mm dia cupboard knobs fixed with nuts, screw and washer of brass polished, bright finished complete all as specified and directed.

S&F in repairs Hat and coat hooks, solid body, 175mm to 250 mm of brass complete all as specified and directed.

S & F in repair 10 ltrs capasity PVC valveless syphonic action type flushing cistern low level white, with inlet ball valve, float and handle including bracket and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and as directed.

S&F in repair stainless steel Sink with draining board, made out of 1.00mm thick for kitchen or laboratory with plug, waste pipe, washers including cantilever cast iron brackets, connecting union etc, overall size 915 mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F in repair floor door stopper brass body and tongue with hard drawn steel spring complete, overall length of cover plate 150 mm complete all as specified and directed.

S&F in repairs soap dish 160x160x90mm, chromium plated type fixed to plugs with chromium plated brass screwed complete all as specified and directed.

S&F in repair vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cictern and flush pipe complete all as specified and directed.

S&F in repair CP Health Faucet with 1 Meter Flexible tube & Hook (Make- L&K or equivalient) complete all as specified an directed.

S&F in repairs 15mm dia two way angle valve, cast copper alloy, chromium plated screwed down, high pressure with crutch or butterfly handle complete all as specified and directed.

S&F in repairs Jet spray chromium plated with 1mtr heavy PVC hose butterfly type, with chromium plated nuts complete all as specified and directed.

S&F in repairs PVC bathroom cabinet standard quality and size 432x311mm complete all as specified and directed .

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mmx420mm bowl size 410mmx330mmx160mm

S&F in repair bib taps 15mm bore standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed. (minimum wt. 90gms).

S&F (in repairs) Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down, screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bpre of pipe complete all as specified and as directed.

S&F in repair swivel shower rose of PTMT any colour for fixing with 15mm pipe fixed all as specified (Minimum wt 40 Gms)

S&F in repair swivel shower rose 75mm of brass Chromium plated for fixing with 15mm pipe fixed complete all as specified and directed.

S&F in repair vitreous china wash basin white, flat, back, size 550x400 mm excluding tap waste but including brackets and including cutting for and pinioning in ends of brackets but exclusive of supply waste pipe complete all as specified and directed.

Supply only 15mm bore pillar tap cast copper allloy with capstan head Chromium plated scwed down with or without letter Hot or Cold with long shank and fly nuts scrwed for iron pipe and fixed as specified and directed.

Supply and fix 32mm dia wast fittings brass chromium plated for basin with long screwed shank and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.

Refixing only GI tube 15mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall including taking down existing GI tubing 15 mm dia & connections all as specified and dircted

S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.

Refixing only GI tube 20mm dia medium grade will new fittings and fixed to wall, ceiling or laid in floor and ceiling and wall including taking down existing GI tubing 20 mm dia & connections all as specified and dircted

S&F in repair 15mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.

S&F in repair 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high denty plastic ball screwed for iron pipe and fixed (min wt. 210gms) complete all as specified and directed.

S&F 20 mm dia gun metal , globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n. exc 4 sqmeach complete all as specified and directed.

Taking down shutter of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but n exc 2 sqm each complete all as specified and directed.

Taking down aluminium door/windows of any size and description and repair/replacement of parts such as beading, rubber gasket , floor spring ,door closer, mortice lock etc and refixing in the same opening all as specified and directed.

S&F 35mm thick glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars , edges of framing plain chamferred or rounded , fitted with cut and mitred beads for securing glass/gauge etc. The size of rails and styles as specified in SSR Part I (2009) section 8 and as per IS-1003 (Part I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed. (Note : Glass/gauge shall be measured and paid separately).

S & F Mild steel work as in chowkats/frame of door or gates of angle or other section with gusset plate, rail braces etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and inclu either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering , running rails and guisides) and hanging also fastening and fixing complete all as specified and directed.

M&L framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. Railings, frame work of of water tanks and ssimilar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F in repairs 300 mm size ordinary mild steel rat tail rod pattern springs including roller and roller plate welded to mild steel frame complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fixed complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specfied and directed.

Taking down cement plaster including racking out joints hacking for key and scrubbing down with water etc complete all as specified and directed.

Demolition of brick work in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class B bricks burnt straight or curved on plan exc 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ old size bricks straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed

M&L for 15mm thick rendering on fair faces of brick or concrete surface in CM 1:6 finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4 with and including WPC , finishing the surface even and smooth without using extra cement. (Note : WPC shall be deemed to be included in cost of qouted rates).

M&L for rendering 10mm thick in cement mortar 1:4 on brick or concrete surfaces as in ceiling , finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of cement base paint incl preparation of new surface of wall complete all as specified and as directed.

M&L for two coats of cement base paint incl preparation of old decorated surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of new surface of wall complete all as specified and as directed.

M& L for two coat of oil bound distemper incl preparation of old treated surface of wall complete all as specified and as directed.

M&L for 1mm thick JK Wall putty on wall all as specified and directed

M&L three coat of white wash on wall including preparation of new plastered surface and complete all as specified and as directed.

M&L three coat of white wash on ceilling including preparation of new plastered surface and complete all as specified and directed.

M&L preparing Old plastered or unplastered surfaces of wall and applying one coat of white wash on old decorated surface of wall complete all as specfied and direcetd.

M&L preparing Old plastered or unplastered surfaces of ceiling and applying one coat of white wash on old decorated surface of ceiling complete all as specfied and directed.

S& F galvanised mild steel wire clothes 0.56 mm nominal dia of wire and average width of aperture1.18 mm complete all as specified and as directed .

Dismantling boarding any sidescription fixed in any position with nails complete all as specified and directed.

S&F 20mm thick boarding with nails as in cub board shelves in any situation planed one side with butt joints complete of 2nd class hard wood all as specified and as direcetd.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F haps and staple 150mm long safety type aluminium anodised with mild steel hing pin including bolt to hing plate and fixed with screws complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.

S&F 150 mm long mild steel pressed handles oval type stove enamlled black complete all as specified and directed.

S&F 200 mm long mild Barrel tower bolt, oval type stove enamlled black with bright bolt and fixed complete all as specified and directed.

M & L preparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint on wood and wood based surfaces complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed.

Disconnecting existing PVC water tanks exc 250 and n exc 500 ltrs capacity setting aside (or lowering if required) for repairs, cleaning with bleaching powder, and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and hoisting if required reconnecting and refixing in same position as specified and as directed.

Disconnecting existing PVC water tanks exc 500 and n exc 1000 ltrs capacity setting aside (or lowering if required) for repairs, cleaning with bleaching powder, and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc and hoisting if required reconnecting and refixing in same position as specified and as directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465x355x265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Welding in repairs exc 2.5 cm but n exc 5 cm in length , thickness of metal to be welded n exc 6mm complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor for pavings n.exc 15cm thickness (below are above ground level) complete all as specified and directed.

Attending plumbing complaints only fixing item in repair and rectify defects i.e. flushing leakage from down pipe, flush handle , PVC connection, stop valves, leakage of bib taps, wall mixer, basin mixer, stop/angle cock, pipe line leakages, float valve, tank replacement etc including provision of all types of washers , thread , rubber cone, M-Seal, Spindle for Bib tap/Stop cock with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed .

Attending carpenter complaints only fixing item in repairs and rectify defects i.e. tightening of loose door/window/cupboard hinges and refixing of loose sliding bolts/tower bolts/handles, refixing of loose pelmet & curtain rod /brackets, easing of doors/windows/cup boards and repair in same position including providing all type of screws, nails, timber beading, fevicol and necessary small items as per site requirement with necessary tools & plants and made functional to entire satisfaction complete all as specified and directed .

Attending mason complaints in repair and rectify defects (i.e. broken wall, floor , plinth protection , plaster, refixing of tiles etc in patches, each job requiring cement not more than 2 Kg for each complaints as per site requirement, including provision of sand & aggregate as required with necessary tools & plant and made functional to entire satisfaction complete all as specified and directed.

S&F 15mm GI nipple of any size for fitting of tanks, certain plumbing works for day to day complaints complete all as specified and directed.

S&F nails (Standard Blind Rivet) in any size and description for day to day complaints complete all as specified and directed.

S&F screws and Nylon plug in any size and description for day to day complaints complete all as specified and directed.

S&F valve & washer (Jamper valve) for repair of Brass Bib Cock in any size and description for day to day complaints complete all as specified and directed.

S&F GI Socket 15mm for plumbing work of day to day complaints complete all as specified and directed.

S&F GI Tee 15mm for plumbing work of day to day complaints complete all as specified and directed.

S&F SS Socket 15mm dia for wall mixer legs for day to day complaints complete all as specified and directed.

S&F taplon tape roll for fixing taps/pillar taps /stop cocks with GI tubing for day to day complaints complete all as specified and directed.

S&F face 2 & 3 Number (Half/Full round) for CP Stop cock and bib cock for day to day complaints complete all as specified and directed.

S&F concealed spundle face, type 2 & 3 number long (Half/Full round) for CP concealed Stop cock for day to day complaints complete all as specified and directed.

S&F concealed spundle face, type 2 & 3 number long (Half/Full round) for Hot /Cold Mixer for day to day complaints complete all as specified and directed.

S&F white cement for mason work for day to day complaints complete all as specified and directed.

S&F PPC/OPC cement for mason work for day to day complaints complete all as specified and directed.

S&F Glass Oil Putty for each panes area upto 0.5 Sqm and exc 0.5 Sqm each of window glass of day to day complaints complete all as specified and directed.

S&F flushing cistern kit different size and make including fittings of day to day complaints complete all as specified and directed.

S&F door seal 95cm to 100cm long with aluminium plate & nylon brush fixed to door with self adhesive & screw.

S&F flushing cistern syphon kit single piece , EWC different size make including fittings of day to day complaints complete all as specified and directed.

M/S MANSI TRADERS

M/S DEEN ENTERPRISES

M/S CHAUHAN ELECTRIC WORKS

M/S SHAHABUDDIN AND SONS