Stock Storage under JSV Division Jubbal in Tehsil Jubbal Distt Shimla HP

Amount

Repair in patch work with 15 mm cement plaster in 1:3 (1 Cement:3 Sand) single coat on rough side of brick/ stone masonry for interior plastering upto floor two level including arries, internal rounded angles, chamfers and rounded angles not exceeding 80mm in grith and finished even and smooth in cement mortar 1:3 (1 Cement:3 Sand) including all leads and lifts and carriage of material at site and as per the direction and entire satisfection of Engineer in Charge.

Providing and laying cement concrete 1:3:6 (1cement: 3 sand: 6 graded stone aggregate 40mm (Forty millimeter nominal size) and curing complete excluding cost of from work in foundation and plinth with in all leads & lifts as per entire satisfication of Engineer-in-Charge.

Bathroom

Providing and fixing panalled glazed or panelled and glazed shutters for doors windows and clearstory windows and clearstory windows including black enamelled iron butt hinges with necessary screws.( 2nd class deodar wood)(40mm thick)

windows

Steel work in single sections including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in R.S. Joists,channels, angles, tees etc. with in all leads and lifts as directed by the Engineer Incharge

Providing and fixing vitreous China wash down water closet (European type. W.C. Pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1Cement : 1 Sand) (Seat and cover to be measured and paid for separately) Ordinary type.

Providing and fixing in trenches 10 Kg.f/cum2 working pressure unplasticized P.V.C. pipe (Conforming to IS: 4985-1968) complete fittings (earth work in trenches to be measured and paid for separately):-

110 mm out side diameter.

Elbow 110 mm dia.

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as require

Providing and fixing of following size PVC casing & capping as required.with in all leads and lifts as per direction of the Engineer-in-Charge.

20 mm x 12 mm

25mm x 15 mm

Supplying and fixing G.I. Modular boxes of size with modular base and plate and cover in recess for modular switch, connections etc. as required.

4 Modular 140mmx78mmx50mm)

Supplying and fixing following rating Piano-type switch/socket on the existing switch box/cover including connections etc. as required. with in all leads and lifts as per direction of the Engineer-in-Charge.

S.P. 5/6 Amps one way switch, piano type.

Supplying and fixing following rating Modular switch /socket in the existing switch box / cover plate including connections etc. as required.

5 pin, 5/6 Amps Modular socket outlet

6 pin, 15/16 Amps Modular socket outlet

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Single door-6 way

Removing white wash or colour wash by steel wire brushing and/or scrapping sand papering and preparing the wall surface smooth including necessary repair to scratches complate.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and incuding a priming coat with distemper priming of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer complete.in all respect within all leads and lifts as per direction & to the entire satisfaction of Engineer-in-charge. ..

Painting (One coat)on previousaly painted wood and wood based surface with enamel paint to give &even shade including cleaning of all dirt &dust and other foregin matter sand papering& stopping with an paint other than white.

Providing and laying cement concrete 1:2:4 (1cement :2 Sand: 4 graded stone aggregate 20 mm (Twenty millimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Suspended Floor roofs, landing and shelves and their support balconies, beams, girders, bressumers and contilever up to floor two level with in all leads and lifts as per the direction of the Engineer - in - Charge.

Providing mild steel/ tor steel reinfircement for rainforced concrete work I/C bending, binding and placing in position complete upto floor two level with in all leads and lifts as per the direction of the Engineer in Charge.

Providing from work steel plates 3.15 mm thick welded with angle iron in frame 30x30x5 mm so as to give a fair finish i/c centering, shuttering, strutting and propping etc. with wooded battens & ballies, height of propping and centring below supporting floor to ceilling not exceeding 4 meters and removal of the same for in situ reinforced concrete and plain concrete work with in all leads aand lifts as per the direction of the Engineer in Charge.

Flat surfaces such as soffits and suspended floors, roofs landing and the like: Floors etc up to 200 mm in thickness with in all leads aand lifts as per the direction of the Engineer in Charge.

P/F Chequrred terozo tiles 20 mm thick with marble chips of specified size laid in floor tread of steos landing on a bed of 25 mm avrage thickness cm 1:6 jointed with neets cement slurry mixed with pigment to make the shade of tiles including in rubbing & polishing complete .(silver grey)

Stair steps

Half Brick masonry in common brunt clay building bricks in :- cement mortar 1:3 (1cement 3 sand )2nd class bricks

Providing and laying spartic ceremic tiles 5.5mm.thick in flooring 600 x600mmx12mm . Matt finish of approved shade inf;oring laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3sand) finished with flush pointing in white cement.including carriage of material within all leads and lifts and as per direction of Engineer-in-charge. ( FLOOR TILES )

White glazed tiles 6 mm thick in skirting , risers of steps and dedo 12 mm thick cement mortar 1:3 (1 cement :3 sand) & Jointed with cement slury Room 1

P/F C.P. Brass Bib tap with capstan head(15mm dia) with in all leads and lifts as per the directions of the Engineer in charge.

Providing & fixing of CP angle cock of 15mm dia with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-union 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-Elbow 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing & Fixing of GI-Tee 15mm dia. with in all leads & lifts as per entire satisfication of Engineer - in - charge.

Providing and fixing of PVC pipe 15 mm dia with in all leads and lifts as per entire satisfication of Engineer - in - charge.

Providing & fixing Stainless Kitchen sink of approved standred ISI make with drain board and C.P waste with C.I or M.S brackets painted white inculding cutting holes and making good the same but exculding fitting:-610x510mm with bowl depth 250 mm

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & Screws etc complete) -with in all leads and lifts as per the directions of the Engineer in charge.

Providing and fixing of 1.00 mm thick colored and lamination sheet(sunmica) on board /ply wood sheets with approved adhesive and nails etc with in all leads and lifts as per the directions of the Engineer in charge.

Providing and fixing of ball bearing drawer sliding channel 18 "size complete with necessary scews etc. with in all leads and lifts as per entire satisfication of Engineer - in - charge.

Providing and fixing of M.S. handle 100mm complete with necessary scews etc. with in all leads and lifts as per entire satisfication of Engineer - in - charge.

Providing and fixing of tapping for cover the edges of plyboard with in all leads and lifts as per entire satisfication of Engineer - in - charge.

AJAY KUMAR (BID ID -529349)

NARENDER SINGH (BID ID -529314)