REPAIRS AND POLISHING AND PAINTING TO MISC ITEMS UNDER THE AOR OF GE DEOLALI

Amount

SOFA SET 4 SEATER FD 373

Removing of old unserviceable cushion cover of sofa set 4 seater and supply and fixing with new tapestry cloth of best quality covered and there after top cover with closely woven fabric as approved by Engr - in - charge and cost of tapestry cloth shall not be less than Rs 160/- Per mtr. (08 Nos of Each Set, Four from seat & four from back). Drg No 273

SOFA SET 4 SEATER- TP

Removing of old unserviceable rexin cloth of sofa set 4 seater(2 x pices,size of 2 seater approx- width x 1320,depth x 835, height-730 mm) and supply and fixing with new Rexine cloth of Synthetic rexin/composite rexine/leatherette of good quality and as per exsting pattern and approved by Engr - in - charge and cost of rexine shall not be less than Rs 400/- Per mtr.( cost includes all other work like stiching and patches filling with good quality of racron filler and other req material solution/staple pins for req work ) Drg No TP, Make : Crush /Abibo or equivalent as approved by GE

Removing & supply and fixing new 3" steel leg shall be made of all as specified as per existing pattern and directed by Engr - In - Charge.

Removing & supply and fixing of new black malmal /cora cloth all as per existing pattern and directed by Engr - In - Charge.

Chair Varandah, Drg No FD 256,

Removing of old cane from chair varandah steel (bottam and back,handle) and re-canning with new best quality plastic cane 4mm wide, white colour Complete all as specified and directed and removing old paint by scubbing with sand paper & Apply two coats of synthetic enamel white painting shade as approved by Enger - In - Charge. Make : Maharastra plastic industries / Indian plastic / National Cane (Kachigm – Daman) & Make paint : Asian, Shalimar or equivalent as approved by GE

Table Dining ORS W/ZINK TOP,Drg No FD 165 (M)

Removing worm out wooden top of table and S&F providing with 18/19 mm thick particle board exterior grade top of size 1900 x 635 mm covered with 22 gauge superior quality aluminium sheet (All as shown on drawing and directed).

Almirah Large /Med/locker Steel, Drg No FD 67/1031/1302/1033/1029

Removing of unserviceable lock with keys and providing and fixing new MS Lock of size 50 mm, 6 levers with stainless steel keys in duplicate for Almirah large/Medium Steel/Locker Steel all as specified and directed by Engr - in - charge. Make : Godrej/Standard/Aligarh or Equivalent as approved by GE

Removing of unserviceable broken handle and S&F new handle steel chromium plated for Almirah Large/Med Steel/Locker steel all as specified and shown in drawing and directed by Engr -in -Charge.

Table centre W/Glass top

Removing of old unserviceable top of glass table centre and supply & fixing new top of glass 10mm thick (4x2) as approved by Engg-In-Charge Complete all as specified and shown in drg.

Removing of old & supply & fixing of new Leg shall be as approved by Engr - In - Charge, Complete all as specified and shown in drg

Chair Computer/Revolving/High Back -FD /TP

Replacement of old unserviceable castors wheels of chaire computer/Chaire Revolving/Chaire High Back,Supply and Fixing new castor wheel of diffrent types as per trades patttern/Exsting pattern or as per requirement approved by Engr-in-charge.

Replacement of old tappestry cloth S&F tapestry cloth/rexine. (cloth of approved quality and shade) alongwith seat and back of chair computer including fixing/tightening/welding and greasing wherever required and painting with synthetic enamel paint of required shade. (Note: The rate of tapestrey cloth/rexine shall no be less than Rs 240 per mtr.)

Replacement of old unserviceable handle with S&F new handle of as per trades patttern/As per exsting patterin and directed bt Engr-in-charge

Removing of old unserviceable adjustable back rest & supply and fixing new adjustible back rest, shall consist of drop and provide lift mechanisim and shall be adjusted in the range of 65 mm and can be locked in 5 steps for better lumber support (Hydraulic Pump, Heavy Duty Make : M Power

Removing of old unserviceable and S & F new Nylon 'A' 10.5 mm dia forged bright zinc plated MS Castor pin is a press fitted in to each prong for holding the castors. It is 600 mm pitch centre dia.

CHARPOY IP FOLDING

Removing of unserviceable ply from charpoy IP folding , tightening the loose frame and S&F new 12 mm thick plywood BWR grade with required size nuts & bolts all as specified and as per existing pattern & directed by Eng-In-Charge Refer Drg No. FD - 220 Make- Kitply / century/Sainik/anchor or equivalent as approved by GE

Charpoy GI PIPE NEWAR FD-220

Complete labour charge for Removing of unserviceable broken long rail of charpoy GI pipe and fixing new long rail made of GI pipe 32 mm dia medium grade (New long rail will be provided by the department ). all as specified and shown on drg. And directed by Engineer-in-Charge. Refer Drg No. FD - 220

Complete labour charge for Cutting of old GI pipe 32 mm bore by converting GI Pipe long rail (obtained from Sch 'A' item No 9.01 above) into short rail, threading both end suitably and fixing with existing elbow. all as specified & directed. Refer Drg No. FD - 220

Complete labour charge for Removing the old existing unserviceable/ broken existing short rail of 32mm bore GI pipe and converting into legs by cutting & threading suitably and fixing with existing elbow all as specified and shown in drg. Refer Drg No. FD - 220

Complete labour charge for Removing old/unserviceable/broken GI check nut 32 mm dia from charpoy GI pipe and Fixing new one (New GI Check nut rail will be provided by the department ). All as per drg as specified & directed by Engineer-in-Charge & Shown on Drg. Refer Drg No. FD - 220

Complete labour charge for Removing unserviceable GI elbow 3 way 32 mm dia from charpoy GI pipe and fixing new one ISI Marked which wl be provided by the department. All as per drg as specified and directed by Engineer-in-Charge & Shown on Drg. Refer Drg No. FD - 220

Charpoy GI PIPE NEWAR FD-220

Removing of unserviceable nylon tape newar from charpoy GI pipe, tightning the entire frame & converting into hard top charpoy Providing 12mm thick plywood BWR grade including 3 nos MS square tube of size 25mm x 25mm, 16 gauge along width of charpoy, fixed duly welded with frame as support to plywood with hole and fixed with required size nuts & bolts all as specified and directed. Refer Drg No. FD - 220 Make- Kitply / century/Sainik/anchor or equivalent as approved by GE

CHARPOY GI PIPE W/PLY TOP

Removing of unserviceable plywood and Supply and fixing new 12 mm ply BWR Grade 1 commercial to charpoy GI pipe by means req size of nuts and bolts/screws, playwood size all as shown on drg FD 220. Make- Kitply / century/Sainik/anchor or equivalent as approved by GE

Removing of old unservicable & Supply and fixing MS Square tube of size 25 mm x 25 mm , 16 Gauge along width of charpoy,25x25 mm MS fixed duly welded with frame as support to plywood with hole and fixed with required size nuts & bolts all as specified as per existing pattern and directed by Engr - In - Charge.

Removing old paint by scubbing with sand paper throughly and Applying one coat of metal primer and applying metal putty to even the surface and wait period of 2-3 hours to be given for putty to set and dry Completely, Scrub off the excess putty with 150 No sand paper and spreying little amount of water simultaneously and two coats of enamel spray painting. make: asian / dulux/ nerolac or equivalent as approved by GE

Almirah Large Steel W/S & W/K FD-67/1031

Almirah Med Steel -FD-67,350,1032

Locker Steel , FD 1029

Chair School W/Hand Board, Drg No FD/E6/MAP/05

Chair CB steel with arms , Drg No FD 75

Charpay Ip folding FD - 220

Table Classroom

Table 900 x 900x760

Table Dining Ors w/zink top, Drg No FD 165 (M)

M & L for two coats of French Polish on wooden surface of any width or girth including scrapping & cleaning all as per drawing & as directed by Engineer- in-Charge. Polishing to following wooden furniture items shall be carried out in occupied Officer Qtrs and unit lines :- , Make : Asian (Apcolite), Berger (Luxol), Shalimar(Superlac) or equivalent as approved by GE

Chair dining, Drg No FD 279

Chair Easy, Drg No FD 229

Chair writing, Drg No FD 280,250

Bed with plywood Top Refer Drg No. FD - 246/21

Peg Table FD Refer Drg No. FD - 25/277

Sofa set 5 Seater Refer Drg No. FD - 373 &FD/Map-II/E6

Sofa chaire Refer Drg No. FD - 373

Sofa set 4 Seater Refer Drg No. FD - 373

Table bed side Refer Drg No. FD - 29/276

Table Center FD Refer Drg No. FD - 274/235

Table dressing ‘Ladies’ Refer Drg No. FD - 251/32

Table dressing ‘Gents’ W/M Refer Drg No. FD - 230

Teapoy FD Refer Drg No. FD - 232/278

Chair dining Map, Drg No FD/MAP-II/04

Chair Dining Map, Drg No FD/MAP-II/05

Table Dressing Ladies Including Stool, Drg No FD/E6/MAP-II/07

Table dining 4 persons, 1200 mm X 900 mm X 760 mm:, Drg No FD/MAP-II/03

Table dining 6 persons, 1500 mm X 900 mm , Drg No FD/MAP-II/03

Table writing Refer Drg No. FD - 249/275

Table 3’ x 2’ W/O Drawer Refer Drg No. FD - 1008

Table 3’ x 2’ With Drawer Refer Drg No. FD - 1007

Table Dining for 8 persons FD Refer Drg No. FD - 273/30/239

Book Case Refer Drg No. FD - 237/45

Note: Amount of sch of credit of Rs.7596/-will be deducted from total amount of BOQ.

VARAROHA BUILDERS