Repair Of Security Wall Security Gate Compound Wall Rcc Jallies Plastering Brickwork And Periodical Work At Zone B Dhar Road Under GE Army Dhar Road

Amount

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, as directed by the Engr-in-charge.

Demolition/Dismantling of Brickwork or stone/ boulder masonry, built in cement mortar incl all quoins, arches, pillars, etc,complete all as specified and directed .

M&L for Brickwork with subclass 'B' bricks (old size bricks), straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as directed.

-ditto- all as per above here in but except bricks.

M&L for brick work with sub class ‘B’ bricks (old size brick) straight or curved on plan to any radius in half bricks thick walls, built in CM 1:4 complete all as directed.

M & L for reinforced cement concrete (nominal mix) type B-1 1:2:4 (20mm graded stone aggregate) footings, plinth beam, lintel beam, shelves, coping, parapets and mass concrete etc complete all as directed.

M & L for formwork to sides and soffits of floor or roof beam,parpets , flat or vertcal surface etc incl supports, overhangs etc complete all as specified.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the mild steel wire (annealed) not less than 0.9mm dia or securing with clips and complete all as specified.

ditto all as above but 6 to 8 mm dia and over and including in stirrups, spacers and binders and complete all as specified.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls, Ceiing etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed

M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface finish ever and smooth (w/o using extra cement) incl WPC as per user manual complete all as specified and directed. (WPC will be measured and paid separately).

Supply only liquid WPC

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance and all as directed.

M&L for two coat of Acrylic smooth exterior emulsion paint over one coat of acrlic primer incl preparation of new plasterd surface by spray gun machine complete all as spd and directed. Note : Colour and make as approved by Engr-in-Charge.

M & L for preparation of old surfaces by removal of existing treatment and apply two coats of cement based paint over a coat alkali primer resistance etc complete all as specified and directed .

M&L for applying two coat of Acrylic smooth exterior emulsion paint on walls, pillars cornices etc surfaces by spray gun machine incl by complete removal of existing sureface & filling necessary putty where required as in pathces or nail holes obtain smooth finish using sand paper and matching the existing surface complete all as specified and directed.

M & L for one coat of synthetic enamel paint on steel surface including preparation of old steel surface width or girth exc 10cm all as specified and directed.

M& L for Glazed ceramic jointless light/dark coloured group of tile (premium quality for exterior surface) size exc 0.13sqm but n.exc 0.18 sqm area of each tiles and thicknes of wall tile not less than 6mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, incl dismantling tiles etc complete all as spd and directted.

M&L for Granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding ,rounding of edgeing and dismantling complete all as spd and directed.

M&L for Providing precast cement concrete 1:2:4 type B0 louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame set in cement mortar 1:4, incl dismantling complete all as specified and as directed.

M & L for 75 mm thick PCC 1:4:8 type D-2 (using 40 mm agg. ) in sub base of flooring incl demolition complete all as spd and directed.

M & L for Factory made prepolished precast concrete designer tiles, ISI marked with grey cement & pigment, 25mm thick of outdoor size 300mm x 300mm , in floors , set and jointed with grey cement slurry, over & incl 20 mnm thick cement mortar (1:4) screed incl dismantling of old tiles complete, all as specified.

M&L for machine pressed precast concrete interlocking paver block of 60mm thickness any shape and size confirming to IS 15658 -2006, with grey cement, pigment complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified.

M&L for PCC type B-0,1:2:4 (12.5mm graded aggregate) as in kerbs or mud stops rounded or chamfered on edge, cills , copings etc complete all as specified and directed..

M & L for PCC 1:2:4 Type B-2 (using 20mm graded stone aggregate) as in flooring incl finishing the cement concrete surface even and smooth with using extra cement , rubbish off the primises , incl demolition complete all as Spd & directed .

S&F for silver mirror finish 1mm thick SS acrylic 3D letter of 304 grade steel and having LED light strip behind the letters. The height, width and depth of each letter shall be 600mm, 450mm and 30mm respectively. Note : (i) This item include for all the fixing materials required to fix the letters on the wall.(ii) Quoted rates include taping to the nearest light point of required length and including the wire of required core as directed by EIC. (iii) The pattern /shade and the design of LED light strip will be as decided by the Eng-in- Charge.

S&F for 3mm thick ACP(Aluminium Composite pannel) sheet with aluminium base frame (size of aluminium Rectangular hollow Section-40x20mm thick) of best quality as any colour as approved by EIC /GE complete all as spd and directed.

Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as directed and specified.

S& F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specifed and directed.

M&L for framed work such as grills, gratings,framed guard bars, walk ways, railings; framework of water tanks, rafters & purlins, fencing post etc work conforming to Fe.290.Gde-E-16, complete all as specified and directed.

S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and complete all as directed and specified.

S&F for pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F in repair fibre glass reinforced translucent sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc incl dismantling complete all as specifeid and directed.

M& L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (Fe 410-W (Gde-E-250) quality A) at any position complete all as specified and directed.

M & L for cement concrete (1:3:6) type C1 (20mm graded stone Agg.) as in embedding of angle iron post/mass concrete / coping etc complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as directed and specified.

MAHADEV ENTERPRISES

S.K CONSTRUCTION

M/S SANJAY STEEL WORKS

PARAS RAM ASGOTRA AND SONS

JINDAL BUILDERS