Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹52.1 Laccepted-finance | ₹52.1 L | accepted-finance |
Tender Value
₹54.4 L
EMD Value
₹1.1 L
Closing Date
22 Jan 2026, 10:30 pmClosed
Karnataka Residential Educational Institutions Society
CONSTRUCTION OF SEWAGE TREATMENT PLANT TO INDIRA GHANDI RESIDENTIAL SCHOOL(SC) AT MANKI, HONNAVARA TALUK, UTTARAKANNADA DISTRICT
253565
KREIS/2025-26/BD/WORK_INDENT521/CALL-4
Open
Buildings
KREIS Assistant Executive Engineer Section Bengaluru
4 documents required · 0 mandatory · 4 optional
Tenderer should Satisfactorily completed as prime contractor, atleast one similar nature of work of value not less than Rs 27.22 Lakhs The workdone certificate duly signed not below the Rank of Executive Engineer.
Executed in any one year, the following minimum quantities of work:(2020-21to 2024-25). Construction of 25 KLD STP. Tenderer Shall submit Workdone Certificate stating the above quantities executed issued by not below the rank of executive Engineer.
The tenderer has to furnish liquid assets and /or availability of credit facilities of not less than Rs 16.33Lakhs Credit lines/ letter of credit/ certificates from Nationalized/ Scheduled banks.
Tenderer has to furnish Annual turnover for the last 5 years i.e. 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 Duly certified by CA with UDIN.
Achieved in at least Two financial years a minimum financial turnover (in all classes of civil engineering construction works only) of Rs 54.45 Lakhs Duly certified by CA with UDIN.
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
DELETED
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The Tenderer shall have valid class-III KPWD/CPWD/MES/Railways/Public sectors licence.
The tenderer has to furnish Company Profile and details of Technical Personnel working/Associated with him the qualification and experience of individual are to be mentioned
The Tenderer shall give details of the works on hand. Present contract commitment.
DELETED
₹1,370
₹1.1 L
22 Jan 2026
7 Jan 2026
23 Jan 2026
14 Jan 2026
SEWAGE TREATMENT PLANT-50 KLD
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, bas...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressivestrength of 4.00 N/mm2 conforming to IS 21...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete,...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing mem...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...
Supplying , installing , testing , commissioning of bar screen to exclude the large sized particles with associated set of guide angles in MS flat of 6.0 mm thick and 50 mm wide kept inclined at 45 de...
Supplying , installing , testing , commissioning of Raw Sewage Pump (Centrifugal/Submersible).The pump shall be coupled to the adequate HP , electric motor , mounted on a common base frame (1W + 1S)Ma...
Supplying , installing , testing , commissioning of Coarse bubble diffusers 90 dia x 800mm long UPVC pipe grid with necessary orifices suitable for 6.0 kg/cm2 pressure rating to provide clog-free oxyg...
Supplying , installing , testing , commissioning of Fine bubble diffusers 90 dia x 1000mm long with the membrane from SCOGEN shall consists of set of membranes , SS 304 clips , nylon rope braided hose...
Supplying , installing , testing , commissioning of approved make Twin Lobe roots type air blower of adequate capacity at 0.5 kg/cm2 capacity of required head comprising of common base frame , suction...
Supplying , installing , testing , commissioning of sludge disposal pumps to pump the sludge from SBR tank to sludge holding tank with wetted parts in CI construction. The pump shall be coupled to the...
Supplying , installing , testing , commissioning of Filter Feed Pump consisting of Submersible type filter feed pumps to feed semi treated water to secondary treatment process through the filters.The ...
Supplying , installing , testing , commissioning of Chlorine Dosing System consisting of Dosing pump and 100 ltrs Solution Tank having detachable lid with molded inserts for mounting of pump .
Supplying , installing , testing , commissioning of Pressure Sand filter for filtration of treated sewage. The filter shall be made of MS with epoxy painting with first charge of media, frontal face p...
Supplying , installing , testing , commissioning of Activated Carbon filter for filtration of treated sewage, The filter shall be made of MS with epoxy painting with first charge of media, frontal fac...
Supply , fixing , testing & commissioning of automatic PLC decant valve for suitable dia with auto electrical operated with isolation ( butterfly valve ) at suitable time as required opening & Closing...
Plant Piping with UPVC of 10 Kg/sqcm pipes with fittings and approved make valves, gauges, instrumentation etc., for all plumbing lines and MS B Class pipeline with fittings for Blower Air Lines
Supplying , installing , testing , commissioning of STP Treated Water transfer pump.The pump shall be submersible type coupled to the adequate HP electrical motor.Make:Kirloskar
Duty: 6 KLH @ 30 M he...
Supply, installation, testing and commissioning of front operated, front access, totally enclosed, free standing, dust and vermin proof Panel (Indoor non compartmental type) with IP 54 ingress protect...
Inter Unit Cabling Inter unit cabling for all equipments with necessary armoured/ unarmoured cables with necessary termination lugs, glands etc complete
---- Including all lead and lift charges, loa...
Maintainance Charges including Man power required during maintainance period( Rs 12500/month for 12 Months) for 1 shift and Consumables required for functioning and maintainance of 50KLD Sewage Treatm...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...
Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...
Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :125x64x1.90mm.As per the direction of Engineer Incharge. ( PWD SR 2023-24 VOl. 02 Item Co...
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Handles 200mm.As per the direction of Engineer Incharge.( PWD SR 2023-24 VOl. 02...
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. Door Stopper 75mm .As per the direction of Engineer Incharge.( PWD SR 2023-24 VOl. ...
Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge. SS Tower Bolts 200x10mm .As per the direction of Engineer Incharge.( PWD SR 2023-2...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
kw-3 manki 521 call-4.doc
Tender Document • 1.15 MB
Download all tender documents and submit your bid