864/WS-44/2020-21

Amount

Excavation in trenches in hard / dense soil, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation of poles, laying of underground cables/pipes etc. including dressing/trimming of sides and leveling, grading and ramming of bottom and getting out, complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed by Engineer-in-Charge.

Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.50 mtr above the ground level, complete all as specified and directed by Engineer-in-Charge.

M&L for clean dry sand, laid in trenches / ducts for bedding and cushioning to cable including spreading and leveling, complete all as specified and directed by Engineer-in-Charge. Notes :- (a) Consolidated / panned thickness of sand shall be measured and paid. (b) Sand shall be as per clause 3.3.1 of Particular Specifications.

Supply & Layng brick, old size, sub class 'B' for the protection of cable, laid dry flat across the cable, complete all as specified and directed by Engineer-in-Charge.

Supply, Fixing, Testing & Commissioning centrifugal nonclog pumping set with CI impeller, CI casting SS shaft & SS sleeve, size 150x150mm, minimum discharge capacity 76 LPS at 20 Mtr head, coupled with 30 HP, 3 Phase induction motor, 415 Volts, 50 Hz, 1450 RPM as per TEFC IE2 including foundaton as per manufacturer's design and electric connection with suitable size of cable and all necessary connection for suction and delivery pipes and all holding arrangements, complete all as specified and directed by Engineer-in-Charge. Make of Pump :- Kirloskar / Matter & Platt (Wilo) / Johnson / KSB Make of Motor :- Kirloskar / ABB / CG / KSB Notes:- (a) Pump set shall be mounted on a metal steel base frame. (b) Payment for foundation & electric connection shall be paid separately in respective items of BOQ.

S&F fully automatic star delta starter in SS enclosure with citation fully automatic star delta starter with NHD contactor & Pneumatic timers for 30/35 HP, 3 Phase, overload relay range 22-30 Amps, contactor rating 40 Amps, complete all as specified and directed by Engineer-in-Charge. Make :- BCH Cat Part No. NASANLEN or technocommercially equivalent make in L&T / ABB / Siemens.

M&L for wiring of starter and motor with single core FR multistranded PVC unsheathed, 1100 volts grade, single core, copper conductor, 16 sqmm size including copper thimbles, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Polycab / KEI

M&L for flanged joint for 150mm bore pipes, comprising of one 3mm steel reinforced compressed asbestos fiber gasket and 12 Nos nuts, bolts of size 25mm dia and 125mm length and 2 Nos washers 3mm thick for each bolt to joint pipes/fittings/bends etc., complete all as specified and directed by Engineer-in-Charge.

Supplying, Laying, Jointing and Testing ductile iron (DI) Pipes 150mm bore, Class K-7, in any length including fittings such as bend, tee etc. with flanged ends, flanged should be duly painted with two coats of black Japan paint, for 150mm bore pipes, 40mm thick and 300mm outer dia having 12 holes drilled for 25mm dia bolts for jointing with the existing pipes, duly welded with pipes / FTTEs / bends properly to both the plain ends, centrifugally cast, laid in trenches, complete all as specified and directed by Engineer-in-Charge. Notes :- The quoted rates shall be included for :- (a) Short pieces of any length as required at site. (b) Pipes shall be laid in trenhes / over RCC pillars / under bridges / culverts / roads etc. (c) Earth work / conceret work / bends / flanged joints shall be measured and paid separately under respective items.

M&L for 150mm bore galvanised steel water tubing 'medium grade' with screwed and socket joints with all fittings such as tees, elbows, sockets, bends, unions, short pieces etc., laid in trenches / walls / floors, complete all as specified and directed by Engineer-in-Charge.

M&L for 15mm bore galvanised steel water tubing 'medium grade' with screwed and socket joints with all fittings such as tees, elbows, sockets, bends, unions, short pieces etc., laid in trenches / walls / floors / ceiling, complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm bore galvanised steel water tubing 'medium grade' with screwed and socket joints with all fittings such as tees, elbows, sockets, bends, unions, short pieces etc., laid in trenches / walls / floors / ceiling, complete all as specified and directed by Engineer-in-Charge.

S&F 500 Ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top), three layered, hoisted and fixed in position, complete all as specified in SSR Part-1 (2009), complete all as specified and directed by Engineer-in-Charge.

S&F Gun metal, globe or gate valve with iron wheel head, screwed both ends for 20mm bore iron pipe or for union, complete all as specified and directed.

S&F Gun metal, globe or gate valve with iron wheel head, screwed both ends for 15mm bore iron pipe or for union, complete all as specified and directed.

S&F sluice valve long body type of cast iron both ends flanged and drilled holes of size 150mm dia, Class-I, conforming to IS-14848:2000 with pressure rating PN 1.6 with brass spindle and iron wheel head with GI nuts, bolts and washers of suitable size, complete all as specified and directed. Make :- Kirloskar / L&T / Audco

S&F cast iron non return valve flanged ends, heavy duty, suitable for 150mm bore pipe including 6mm thick 2 Nos rubber insertion ring with GI nuts, bolts and washers of suitable size, complete all as specified and directed. Make :- Kirloskar / L&T / Audco

S&F cast iron foot valve 150mm bore, conforming to IS-4038 including joints and jointing material complete all as specified and directed. Make :- Kirloskar / L&T / Audco

Supply, Laying & Testing XLPE insulated, screend, PVC bedded, galvanised steel strip or wire armoured electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core, complete all as specified and directed by Engineer-in-Charge. Make :- Finolex / CCI / Polycab

M&L for earthing complete with galvanised steel earth plate of size 60cmx60cmx6mm thick, burried directly in ground, earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below normal ground level, connected to equipment by using GI strip of size 32x6mm as earthing lead by means of bolts, nuts, check nut & washers of galvanised iron complete all as shown in electrical plate No. 5 of MES SSR Part-I (Specifications) and connected to earthing test point including earth pit of size 30cmx30cmx45cm, made of PCC 1:3:6 and RCC cover, funnel wire mesh, GI tubing etc. & testing on completion, complete all as specified and directed by Engineer-in-Charge. Notes :- (a) The quoted unit rate shall be included the cost of excavation & earth work in any type of soil, charcoal, salt in ultimate layers, 20mm GI pipe (light grade) for watering, 40mm GI protection pipe (medium grade), funnel wire mesh, PCC 1:2:4 type B-1 chamber, 50mm thick precast RCC 1:1.5:3 (Nominal mix) cover duly reinforced with XPM (weight not less than 3 kg/Sqm) and CI frame etc. and including provision to test point, connection to test point.

M&L for 10mm thick rendering in CM 1:4 on stone masonry or brick work, finished the surface even and smooth without using extra cement including taking down existing cement plaster of any description, complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surfaces of walls of any description and applying two coats of cement paint over one coat of alkali resistant primer, complete all as specified and directed by Engineer-in-Charge.

M&L for PCC 1:2:4, type B-2 (using 40mm graded crushed stone aggregates) as in foundation of electric poles, struts, PCC block and fair finished to exposed surfaces without using extra cement, complete all as specified and directed by Engineer-in-Charge.

M&L for point wiring with 1.5 Sqmm copper conductor cable (multistranded) PVC insulated FRLS (unsheathed), surface type, drawing in and including PVC casing & caping, medium grade with sunk cast iron / pressed steel terminal boxe, made out of 1.2mm thick sheet including one coat red oxide primer on internal and external surface covered with 3mm thick hylam brand IS-2036 Marked laminated sheet cover (for mounting switches, sockets) and including 1.5 Sqmm PVC insulated (multistrand) FRLS copper conductor continious earth wire, controlled by one switch on independent board, complete all as specified and directed by Engineer-in-Charge. Make of Wire : Havells / KEI / HPL / Polycab

M&L for point wiring with 2.5 Sqmm copper conductor cable (multistranded) PVC insulated FRLS (unsheathed), surface type, drawing in and including PVC concealed conduit 25mm dia, having wall thickness not less than 2mm thick with sunk cast iron/pressed steel terminal boxe, made out of 1.2mm thick sheet including one coat of red oxide primer on internal and external surface, covered with 3mm thick hylam brand IS-2036 Marked laminated sheet cover (for mounting switches, sockets, regulators etc.), including 1.5 Sqmm PVC insulated (multistranded) FRLS copper conductor continuous earth wire for one 15 Amps socket outlet, controlled by one switch on independent board, complete all as specified and directed by Engineer-in-Charge.

S&F switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 15 Amps, complete all as specified. Make : SSK / Cona / C&S

S&F switch, single pole mini with porcelain base, 16 Amps, 250 Volts, AC with ISI Marked including switch frame, complete all as specified and directed. Make :- SSK Cat Part No. F 954 of switch & 919 of switch frame or technocommercially equivalent make in Legrand / Hager.

S&F switch socket combination outlet, 3 pin 5 Amps, flush type, complete all as specified and directed.

S&F socket outlet 2 in 1, 3 Pin, 5 & 15 Amps, flush type, complete all as specified and directed. Make : SSK / Cona / C&S

S&F socket 5 pin shuttered type, 6/16 Amps, 240 volts including 16 Amps socket frame, complete all as specified and dirceted. Make :- SSK Cat Part No. F 951 of socket & F 920 of socket frame or technocommercially equivalent make in Legrand / Hager.

S&F ceiling rose, surface backelite of 65mm x 50mm, ISI Marked with 3 terminal including connecting, complete all as specified. Make :- Havells / Anchor / HPL / SSK

S&F bell electric ding dong, AC, 230 volts, single pole, complete all as specified and directed. Make :- Havells / Anchor / HP

S&F bell push, flush button, single pole, one way, 5 Amps, 240 volts with polycarbonate body, complete all as specified. Make :- Havells / Anchor / HPL / SSK

S&F stepped electronic fan regulator, flush type, complete all as specified and directed. Make :- Havells / Anchor / HPL / SSK

S&F sheet metal enclosure double door for mounting MCBs with 200 Amps rated busbar 4 way AC 240 volts with IP-43 protection including cutting chases to wall for fixing DB and making good the disturbed surface to match with existing surface, complete all as specified and directed by Engineer-in-Charge. Make :- L&T / HPL / ABB

S&F MCB SP 6-32 Amps, 240 Volts, 50 Hz, AC, made from moulded self-extinguishing thermostate plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. Make :- L&T / HPL / ABB

S&F MCB SPN 16 Amps, 240 Volts, 50 Hz, AC, made from moulded self-extinguishing thermostate plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. Make :- L&T / HPL / ABB

S&F MCB SPN 32 Amps, 240 Volts, 50 Hz, AC, made from moulded self-extinguishing thermostate plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. Make :- L&T / HPL / ABB

S&F MCB SPN 40 Amps, 240 Volts, 50 Hz, AC, made from moulded self-extinguishing thermostate plastic and suitable for ‘C’ curve, 10 KA breaking capacity, complete all as specified and directed. Make :- L&T / HPL / ABB

M&L for submain wiring with two single core FRLS PVC insulated flexible copper conductor cable of size 2x4 Sqmm and one single core PVC insulated flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in and including PVC conduit and making good the disturbed wall surfaces to match with existing specifications, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Plaza / KEI / HPL / Paragon

S&F decorative box type fitting, prewired for and including LED tube 18/20 watt, 6000K, 4 feet IP-20 linear LED T-8 tubular lamp with extruded aluminium/PC body and PC diffuser, complete with inbuilt driver, complete all as specified and directed. Note :- Fitting, LED tube and driver shall be of same make.

S&F bulk head luminaire, decorative type, energy saving, new generation, 10 Watt LED IP-65 with opal diffuser including electronic driver and connection with copper flexible cable 3 core, complete all as specified and directed by Engineer-in-Charge.

S&F Recess mounted LED luminaire with complete diffuser 36 Watt, size 2' x 2' , flat panel ultra slim, powder coated CRCA housing, heat sink, complete all as specified and directed. Make :- Wipro Cat Part No. CRCO10R036HP57G1 / Philips Cat Part No. RC380BLED34S-6500G3PSDOD / Crompton Cat Part No. LCPL-36-CDL(2X2)

S&F ventilating fan, made out of high quality engineering plastic, resistant to colour change with antistatic properties, 250mm sweep, suitable to work on 230 Volts, 50 Hz, AC including connecting to ceiling rose, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Crompton / Bajaj

S&F ceiling fan, AC, single phase 230/240 Volts of size 1200mm sweep including connecting with PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50 Sqmm and including hanging arrangements made out of MS clamps with nuts, bolts and washers, complete all as specified and directed by Engineer-in-Charge. Make :- Anchor / Havells / Khaithan / Bajaj

S&F wall mounting fan, 400mm sweep, pull cord, oscillating type, single piece, AS blade, 3 speed pull cord controlled including fixing arrangements, complete as specified and directed by Engineer-in-Charge. Make :- Havells / Usha / Bajaj

S&F storage water heater 25 Ltrs capacity, vertical mounting, AC, 230 Volts, BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts, complete including grouting of nuts and bolts, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Venus / V Gaurd / Bajaj

S&F storage water heater 50 Ltrs capacity, vertical mounting, AC, 230 Volts, BEE 5 Star rating including connecting cord and plug, safety valve, nuts and bolts, complete including grouting of nuts and bolts, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Venus / V Gaurd / Bajaj

S&F PVC flexible connection with length 450mm, 15mm dia with brass hexagonal adoptors both side, duly ISI marked, suitable for hot/cold water, complete all as specified.

S&F 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S&F stop valve cast copper alloy, screwed down, high pressure, fancy type, chromium plated, screwed both ends for 15mm bore iron pipe, complete all as specified and directed.

S&F self closing tap screwed, cast copper alloy, chromium plated, screwed for 15mm bore (minimum weight 90 Gram), complete all as specified.

M&L for earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick, burried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level, connecting to the galvanised iron earth lead wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and earth strip, protected by GI light grade pipe of 20mm bore including provision of concrete pit in PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25x25x6mm with lugs 02 Nos and including 20mm bore pipe for watering, perforated at bottom 1.75 mtr long placed on top edge of earth plate including common salt and charcoal filling, test point made out of 40x6mm flat iron with fixing arrangement funnel wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exc 50 mtr, complete all as per electrical plate No. 03 of SSR Part-I (2009) and connecting to earth test point including testing after completion, complete all as specified and directed by Engineer-in-Charge.

Supply & Installation bottled water dispenser, having option of dispensing Hot & Cold water with cooling capacity 3 Ltrs/hour and tank capacity of 3.40 Ltrs, heating capacity 6 Ltrs/hour and tank capacity 1.6 Ltrs, working in R-134a refrigerant, complete all as specified and dirceted. Make :- Blue Star / Voltas or technocommercially equivalent make as approved by GE.

Supply only PVC bottles of capacity 40 Ltrs, suitable for bottled type water dispenser.

Supply, Installation, Commissioning and Testing of commercial air curtain unit of size 64'' x 84'' for prevention of dust and conditioned air losses, single phase, 220 Volt, 50 Hz, made out of CS/CRCA sheet of minimum thickness 18 gauge finished with two coats of synthetic enamel paint (oven baked) over one coat of red oxide primer with MS-CRC 18 gauge square perforated suction grills, aluminium alloy fans and single phase electric motor, nozzles etc. complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening as specified.

M&L for cross arms, bracings, supports fabricated from structural steel sections for hanging air curtain including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and including two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer, complete all as speified and directed by Engineer-in-Charge.

Supply & Installation refrigerator, frost free, double door, adaptive intelligence technology inverter compressor, convertible freezer driven (single phase) 240 Volts, capacity 320-340 Litres, minimum 3 star rating, complete all as specified and directed. Make :- LG / Whirlpool / Godrej

S&F voltage stabilizer for automatic operation, single phase, naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230 Volts with accuracy of + 2.5 and of capacity 1 KVA, complete all as specified. Make :- V Guard / Alba / Venus

Supply, Fixing & Commissioning Split type air conditioner unit with Hot and Cold mode of 1.5 TR capacity with digital inverter, single evaporator unit wall mounted, condenser unit and with compressor, non ductable corded type suitable for operation on 230 Volts, 50 Hz, Single phase electric supply including provision of necessary weather proof cover with fixing arrangement on suitable brick masonry platform for protection of condenser/compressor unit from sun, rain and fixing the evaporator inside the bldg with suitable insulation including provn of copper refrigerant piping of suitable length from condensing to cooling coil and vice-versa duly overlapped by nitride insulation, and suitable drain pipe for dropping out the water outside form evaporator duly electric connection with 3 core copper cable of suitable size up to the existing mains as required at site and making good of disturbed surface, complete all as specified and directed by Engineer-in-Charge. Notes :- Cost of MS bracket and guard to install condensing unit including painting/grouting for protection from weather, copper pipes, PCC raised platform, electric cable for making connection etc. as required shall be included in quoted unit rate. Make :- LG / Hitachi / Blue Star / Voltas.

S&F sheet metal enclosure with plug top, single pole and neutral with two pin and earth plug and socket complete with one MCB SP 40 Amps, complete all as specified and directed by Engineer-in-Charge. Make :- Havells / Indo Asain / Standard

S&F voltage stabilizer for automatic operation, single phase, naturally air cooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230 Volts with accuracy of + 2.5 and of capacity 5.0 KVA, complete all as specified. Make :- V Guard / Alba / Venus

ORISON ENTERPRISES

M/S M.A.S ELECTRICALS