SPL REPAIRS FOR REPAIR OF TRANSFORMER 150 KVA REPLACEMENT OF LT PANEL AND HT GOD LIGHTING ARRESTORS ON 2 POLE OF GARDEN CITY MD ACCN AND UG CABLES OF CERTAIN UNITS AND PROVN OF SECURITY LIGHT WITH POLE AT OUTER PERIMETER OF 787 I AD BDE SIG COY AND M

Amount

Dismantling GOD/Lighting arrestor vertical/horizontal mounted (U/S air break gang operated switches will be issued as a Schedule of credit) complete all as specified and as directed.

Dismantling Lighting arrestor pole mounted (U/S lighing arrestor will be issued as a Schedule of credit) complete all as specified and as directed.

M&L for triple pole, mechanically operated GOD, mounted on insulator and steel frame, with operating mechanism worked from ground level, for current rating upto 200 amps suitable for 11000 Volt complete all as specified and as directed.

M&L for Lighting arresters expulsion type complete with all fittings, transmission class, discharge capacity 65 Kilo amp suitable for 11000 Volt complete all as specified and as directed.

Repairs to transformer distribution type out door, step down of rating 11 kv/0.433 kv, 150 KVA, 3 phase, 4 wire installed at garden city. (a) Disconnection of electrical connections from HV side and LV side earthing connection and transporting from site to work shop and back to Dehu Road complex after repair. (Note : Crane/Vehicle will be arranged by the contractor for lifting up and down for loading/unloading of transformer)-01 No. (b) Strip opening of transformer, lifting up core assemble unscrewing and core assembly nut and bolts, removing defective HT/LT bushing after draining and carbonized transformer oil all as directed/required at site. 01 No. (c) Rewinding of transformer core assembly by using supper enameled copper wire as per existing size and gauge, heating varnishing, baking including insulation materials all as required - 01 Job (d) HT bushing = Set of three 01 (e) LT bushing = Set of four 01 (f) Filling of transformer oil dielectric strength 45KB = 200 Ltr (g) Replacement oil seal packing of transformer cover = 01 No. (h) Painting of transformer by using super enameled gray paint one coat of primer and two coat on primer all as directed at site. (j) Fixing, commissioning and testing its original position including HT/LT connection and connection of earthing strips all as required at site.

Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/loose soil for laying cables/GI pipe, foundation of pole, stay etc complete all as specified and as directed by Engr-in-Charge complete all as specified and as directed.

Excavation on trenches hard/dense soil for laying of cable and making good the bottom surface n.exc 1.5 mtr in depth and n.exc 1.5 mtr in wide complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed by Engr-in-Charge.

Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed by Engr-in-Charge.

Material and labour sand filling in trenches with clean dry unwashed sand for cushioning of under ground cable complete all as specified and as directed by Engr-in-Charge.

Material and labour for brick modular sub class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above the sand cushioning for cable protection complete all as specified and as directed by Engr-in -Charge.

M&L for earthing complete with glavanised steel earth plate electrode 600x600x6mm thick buried directly in fround (earth plate not less than 2.25 mtr deep below the normal ground level) with top edge of plate not less than 1.5 mtr below the normal ground level connected to check nuts of iron or steel including GI Strip 32x6mm upto Panel/equipment, duly protected with GI pipe light grade 50mm bore upto and incl testing point, PCC pits and RCC cover in PCC 1:2:4 (type B1) including iron angle frame 40x40x6mm and medium grade GI watering pipe 20mm dia with funnel and wire mesh including excavation and charcoal common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I complete all as specified and directed.

M&L for steel tubular swaged pole complete with MS base plate final taper plug bolts, nuts & screwes as specified type 410 SP-37, (9.5 mtr) long complete all as specified including applying on coat of aluminum coat over a coat of primer complete all as specified and as directed.

Supply and fix LED street light 35W new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover with IP66 protection and resistance of IK07of WIPRO - Model No. LR02-391-XXX-57-XX PHILIPS - Model No. BRP409LED CW035 HPL-Model No. HPLLEDSL40603 complete all as specified and as directed by Engr-in-Charge. Note :- Item rate includes material & labour for 3 core aluminium, 1.5 sqmm conductor for connection from junction box to street light fittings.

S&F in repair PVC junction box 200mmx160mmx98mm size with opening door arrangement and fixing arrangement on pole including porcelain base with 04 Nos aluminium strip suitable for incoming and outgoing connection complete all as specified and as directed at site.

PCC type C2 1:3:6 (40mm graded aggregate) as in foundation filling and mess concrete complete all as specified and as directed.

PCC type B1 1:2:4 (20mm graded aggregate) as the coping including form work of pole complete all as specified and as directed.

Dismantling /disconnecting LT cables of any size with accessories. Old unserviceable of any type broken or damaged cables fitting on poles / laid in trenches and keeping aside for further disposal.

M&L Re-Laying serviceable cable obtained from itme No-1 of any size with accessories. Old serviceable cable of any size re-laying as per site reqment and directed by engr in chrage.

Supply & Laying cable XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with strandad aluminum conducter of following sizes:- Make :- Havells/ Polycab/ Gloster

95 sq mm x 3.5 core

70 sq mm x 3.5 core

50 sq mm x 3.5 core

35 Sq mm x 3.5 core

25 Sqmm x 3.5 Core

16 Sqmm x 4 Core

10 Sqmm x 4 Core

M & L for DWC HDPE Pipe for UG cable protection passing of cables on wall or floors with shaddling and under ground and all as specified and directed by Engineer-in-Charge.

15 mm outter dia

50 mm outter dia

80 mm outter dia

S&F cable jointing kit for 1100V XLPE grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable of size 10 to 16 sqmm complete all as specified and directed by Engineer-in-Charge. Make :- M-Seal/ Densons/ Dowells.

all as per item No 3 but for cable of size 25 to 50 sq mm.

all as per item No 3 but for cable of size 70 to 120 sq mm.

Supply and fix cable jointing kit for 1100V grade cable for indoor/outdoor end termination, heat shrink type, joint complete with jointing material and accessories suitable for 3.5 core XLPE, armoured, Al conductor cable of size 6 sqmm to 16 sqmm

all as per item No 4 but for cable of size 25 sqmm to 50 sqmm

all as per item No 4 but for cable of size 70 to 120 sq mm.

Supply and fixing in repair cable route indicator made out of 25X25X3mm angle iron 150mm clear hight with 100 mm long embedded in PCC 1:3:6 type C-1 ( using 20mm stone aggregate) block of size 200mm x 200 mm x 200 mm with Letter "MES HT CABLE" suitable inscribed on one CI circular plate 100mm dia 5mm thick welded with angle iron including necessary earth work and two coat of synthetic enamel paint over a coat of red oxide primer on steel surface complete all as specified and directed

Supply & fix in repair MCCB 400 Amp, 4 pole,415 V for incoming power supply in distribution LT panel ,with breaking capacity 26 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider

Supply & fix in repair MCCB 250 Amp, 4 pole, 415 V, using in distribution LT panel with breaking capacity 26 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider

Supply & fix in repair MCCB 200 Amp, 4 pole, 415 V,using in distribution LT panel with breaking capacity 26 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider

Supply & fix in repair MCCB 160 Amp, 4 pole, 415 V, using in distribution LT panel with breaking capacity 16 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider

Supply & fix in repair MCCB 125 Amp, 4 pole, 415 V,using in distribution LT panel with breaking capacity 16 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider

Supply & fix in repair MCCB 25 to 100 Amp, 4 pole, 415 V,using in distribution LT panel with breaking capacity 16 KA ,Ics=100% Icu. Make : L&T /LEGREND/ ABB/Sncheider

S&F in repair of FRP junction box for cable cannection, with four aluminium busbar strips 20X3MM capacity with epoxy insulation fixed on PVC saddles with nut & bolts, cover with color coded caps (RYBB) with and including MCB SP 2.5 Amps capacity and size of 170x135x100mm, complete all as directed. Make :- Sintex/ National/ L&T

Hiring Only sophisticated cable fault locator consisting of microprocessor based prelocator system, LV surge generator, fault pint point surge wave receiver, cable identification instrument, cable tracer for exact location of under ground cable routes for detecting LT UG cable faults located in any stretch/depth. Note : The rate quoted shall deemed to be inclusive of rental charges for T&P like entire cable fault locating instrument, charges for operator, and transportation etc complete.

Supply and install, testing and commissioning of LT Feeder Pillar panel board for cable cannection, Outdoor with double door, roof canopy, Angle iron, above from ground level housing cucible type, panel working on 440 V 50 Hz AC supply It shall be extendible at both ends with aluminium busbar. fully compartmentalised dust proof and vermin proof made out of 3.15 mm thick CRCA sheet steel enclosure painted suitable for outdoor IP-55 Protection, weather conditions as per specification and all as directed by Engr-in-charge.

M&L for Boring holes under road, hard standing by trechless technology using necessary machine including laying GI tubing/HDPE pipe of required size Note : Item rate includes necessary excavation required on both side of road.

M&L for GI tubing 80 mm dia light grade with all necessary fittings on wall/poles and etc all as specified and directed.

M&L for GI tubing 100 mm dia light grade with all necessary fittings on wall/poles and etc all as specified and directed.

M & L in repairs for earthing with galvanised steel earth plate electrode 60cmx60cmx6.3mm burried directly in ground earth pit not less than 2.25 m deep below normal ground level with top edge of the plate vertically to depth of not less than 1.2 m below ground level connected to and including GI strip of size 25 x 4 mm as earthing lead welded with earth electrode (excluding GI protection pipe) and connecting to equipments by means of earthing lead connecting to equipments by means of GI bolts & nuts etc. with provision of char-coal and salt etc. all as per electrical plate No. 3 of SSR Part I, 2009 including RCC cover and MS angle iron frame watering arrangement with GI pipe 20mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc complete all as specified and directed by Engr-in-Charge.

Supply and laying or fixing or passing through pipe,1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sqmm 4 core nominal cross section in service connections. Make :- Polycab/Gloster

Supply & erect in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 55 , 11 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole. ( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately) Make : Electrosteel/ Indian Pole/ Singh Profiles/ Kalki tubes & Poles

Material and labour in replacement for LED flood light 150W LED IP65 New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium with lens and toughened glass type with high power LEDs as light source including electronic driver 150W LED including making connection with thre core aluminium conductor pvc cable from junction box to street light fitting all as specified. MAKE:- CAT PART NO LFLN-150-CDL/60-M of Crompton ,LF07-152-060-50-V5OF WIPRO, LHFP-CZBFP46J150 OF HAVELLS

Supply and fixing MCB (C Curve) 32 Amps TPN and Fixed on ploe/panel. Cat Part No : RFPCC6-32 of HPL or Eq in L&T/ABB

supply and fix in repair MCB DB SPN sheet metal enclosure Double door suitable for mounting MCB 240 volts with 200 Amps rated busbar 4 way Make :- MDBECOTDD04 of HPL or Eq in Havells/Anchor

M&L for GI tubing ring for mounting flood light fitting made out of 40 mm dia light grade GI tube system cosisting of two ring outer ring of 02 metre dia and inner ring 01 metre dia both ring are connected with four Nos support frame control to outer ring , including MS socket of suitable dia and gauge for fixing on top of dia of steel tubular pole with clamps of F1 50x6mm, nuts and bolts of required size for mounted on pole for fixing of lood light complete all as specified.

M & L for Earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less 1.5mtr below normal ground level. Earth plate surrounded on all sides with 15cm thicklayers of charcoal dust mixed with salt and connected with earth lead wire 4.00mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel in heavy duty HDPE pipe for protection of GI wire in for earthinglighting arrester including precast RCC pit in (1:2:4) type B-I cover with suitable handle, excavation and earth work in soft/loose soil, light grade GI watering pipe 20mm bore with funnel and wire mesh and medium grade GI protection pipe 15mm bore upto bottom of electric HT pole complete all as shown in EP No 03 of MES Sch-1991 (Pt-1) and testing all as directed by EIC.

Supply and fix water heater storage type, electric, capacity 25 litres, BEE 5 star rated.

M&L submain wiring with two single core PVC insulated unsheated stranded copper conductor 6 sqmm (Nominal area) drawing through PVC conduit/existing concealed conduit or casing caping and 4 sqmm stranded coppre conductor cable PVC insulated and unsheathed (green colour) 1100 volts grade for earth continuity conductor and connected with main earth dolly.

S&F switch socket combination 5/16 A 5 in 1 flush type with fuse and new indicator.

S&F steel water tubing medium grade galvanised including all fittings such as tees, bands, sockets unio nipple etc ISI market laid on floors or fixed to walls of size 15 mm dia boare including taking down old pipes.

S&F stop valve Cast copper alloy high pressure with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed completely all as specified.

Om Sai Enterprises

M/S kirpan Enterprises

M/S JEELANI ELECTRICALS

S.M.Sales Corporation

Shri Sai Electricals

Preeti Enterprises