8748MAINT OF CERTAIN BUILDINGS INCL PERIODICALS AND CLEANING OF SERVICE TANKS WITH ALLIED WORKS AT AFTC UNDER GE M AF JALAHALLI BANGALORE

Amount

Demolition of cement concrete (unreinforced) any description and in any position not otherwise specifically provided for.

Demolition of reinforced cement concrete any description and in any position not otherwise specifically provided for.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and applying neat cement slurry by brush with 3.0kg of per sqm

Material and labour for 50mm thk PCC 1:2:4 type B-1 using 20mm graded stone agg as in flooring finished even and smooth without using extra cement all as specified and directed .

Material and labour for cement concrete 1:3:6 type C-2, 75 mm thick using 40mm graded stone aggregates as in plinth protection complete finished fair and even.

Material and labour for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded stone agg as in levelling coarse under floor finished surface even and smooth without using extra cement all as specified & directed

Material and labour Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work.

Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar.

Dismantling floors hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises.

Material and labour for 15 mm thick screed bed in cement mortar 1:4 for laying floor finishes all as specified and directed .

Material and labour for Dubbing out 15mm thick on irregular face of walls in CM 1:6 on brick work or concrete/stone surfaces.

Material and labour for rendering 10mm thick in CM 1:3 on brick work or concrete surfaces as in backing coat to receive wall tiles etc.

Material and labour for First quality non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.

All as per item Ser No. (13) above but in skirting/dados etc.

Material and labour for first quality Non skid joint free ceramic coloured tiles 7 to 8mm thick , area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

Material and labour for first quality coloured glazed ceramic tiles of size 300x200x7 to 8mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match.

Material and labour for 10mm thick coloured light shade joint free vitrified tiles (Square/rectangular) polished area of each tiles not exc 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed .

All as per item No (17) hereinbefore but in skirting including necessary cutting of tiles.

Material and labour for dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar.

Material and labour for 20 mm thick screed bed in cement mortar 1:6 for laying floor finishes all as specified and directed .

Material and labour for Chequered cement concrete tiles 20cm x 20cm x 25mm thick with white cement and pigment, set, jointed and pointed in neat cement slurry in floors all as specified and directed .

Material and labour for 15 to 20 mm thick pre- polished granite slab machine cut, in skirting/dado, steps, jambs, pillars, window cill, cooking platform etc. of any shade as approved by GE including necessary notching, chamfering the edges over cement screed bed including cutting, Grinding and Mirror polishing (Granite finish) with suitable grinding stones complete all as specified and as directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick laid & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete all as specified& directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick in steps/vertical surface laid & jointed with grey cement slurry mixed with pigment to match the shade of slab incl rubbing & polishing complete all as specified& directed.

Material and labour for Pre-cast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate set in cement mortar 1:4 as in cover slab including all necessary form work. Exposed surfaces of concrete shall be finished even and smooth without using extra cement. (Note : Reinforcement shall be measured and paid separately under relevant items of this schedule).

Material and labour for Mild steel TMT bars 10mm dia and over, cut to length bent to shape required including cracking bending spirally hooking ends and binding with MS wire (annealed) no less than 0.90 mm dia

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches etc complete

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6.

Removal of existing roof treatment with plastering and cleaning the surface with wire brushes and washing and drying the top surface for execution of work roof treatment work complete all as specified and directed.

Demolition of concrete (unreinforced) of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified.

Material and labour for 50mm thk (average) PCC 1:2:4 type B-1 using 20mm graded stone agg as in roof padding finished even and smooth without using extra cement all as specified and directed .

Material and labour for 10mm thick plaster in CM 1:3 with approved water proof admixture as recommended by the manufacturer when concrete is green of roof padding all as specified and directed. (Note : WPC will be measured and paid separately under relevant item)

Material and labour for Applying bitumen blown 85/25 grade, applied hot, to concrete surfaces at the rate of 1.2kg per sqm per coat.

Supply and fixing APP based polymeric membrane minimum weighing 4kg/sqm and minimum 4mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified

Material and labour for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3

Material and labour for bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, 8cmx8cm at the junction of roofing to vertical surfaces

Material and labour for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement and user water proofing compound. (Note : WPC will be measured and paid separately under relevant item)

Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement

Material and labour for rendering 5mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement as in ceilings.

Material and labour for making groove in plaster of size 10mm width and 8mm depth in junction of wall and Col/Beam and applying Sika Primer 3N and filling with Sikaflex Construction (AP) with 112gm sealant/rm incl thermocol rod backup as per manufacturer's instructions

Supply only integral water proofing compound.

Material and labour for two coats of distempering on walls with washable distemper oil emulsion on new surfaces over a coat of alkali resistant priming paint (white or tinted) including preparatory work to give uniform and smooth finish all as specified as directed.

Alll as per item Ser No. (42) above but on ceiling.

Material and labour for two coats of cement based paint over a coat of alkali resistant priming paint on newly plastered surfaces of wall including necessary preparation and all as specified and directed.

Making arrangement of scaffolding in buildings (ht exc. 5.00 mtr but not exc. 8 mtrs), cutting of small trees/plants at the stem, removal of the roots of the plants by using acids, cutting around the spot for removing the roots any size and making good with cement mortar 1:3 or with PCC 1:2:4 including finishing with existing complete all as directed by Enginner-in-charge.

Material and labour Providing and injecting chemical emulsion for post construction anti termite treatment along external wall below concrete or masonry apron using chemical emulsion @ 2.25 liters per liner meter including drilling and plugging holes etc in apron complete all as specified and directed

Material and labour for injecting at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed.

Supply and fixing in repairs PVC low level flushing cistern 10 Ltr capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed

Supply and fixing in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling etc all as specified and directed

Taking up or down steel tubing of size 15 mm and connections, including cleaning and refixing old teel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

All as per item No (50) hereinbefore but 20mm dia.

All as per item No (50) hereinbefore but 25mm dia.

Supply and fixing 15 mm dia galvanised steel water tubing medium grade to walls and ceiling or lying in floors.

All as per item No (53) hereinbefore but 20mm dia.

All as per item No (53) hereinbefore but 25mm dia.

Re-fixing old steel water tubing and connections in new or old position (walls, ceiling, floors etc) 15 mm dia (Note: Serviceable pipe obtained from item 50 to 52 to be re-used)

All as per item No (56) hereinbefore but 20mm dia.

All as per item No (56) hereinbefore but 25mm dia.

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting n.exc 10 cm girth.

Supply and fixing in repairs 15 mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe.

Supply and fixing in repairs 15 mm dia angle cock (two way) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for fixing of health faucet and PVC connections etc. all as specified and directed.

Repairs of 15mm bib taps cast copper alloy including replacing of brass spindle, washers etc. cleaning, removing bloakage, repacking and refixing in same position for functioning all as specified and directed.

Repairs of low level flushing cistern (10 litre capacity) including replacing of syphon, washers, ball valve, float etc. and cleaning/removing bloakage, repacking and refixing in same position for functioning all as specified and directed.

Supply and fixing in repairs 15mm size concussive push button taps of cast copper alloy, screwed for iron pipe and fixed all as specified and directed.

Supply and fixing in repairs stop valves fancy type chromium palted with long shank and cup (concealed type ) screwed for iron pipe of 15 mm bore.

Supply and fixing in repairs brass Choromium plated shower rose with or without swivel joints 125mm size includingfixing to steel pipe or union complete.

Supply and fixing in repairs 20 mm dia gun metal gate valve with Iron wheel screwed both ends for Iron pipe.

Supply and fixing in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed complete for 15 mm bore.

Supply and fixing in repairs pillar tap with capstan heads chronium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore

Supply and fix in repairs viterous china squatting pan Orrisa pattern size 580 x 440 mm white with "P" and "S" trap front or back inlet etc including provision of PCC (1:5:10) concrete complete all as specified and as directed

Supply and fixing in repair vitreous china wash down water closet, padestal pattern, white in colour incl white seat cover ISI marked 'P' or 'S' trap, fixing bolt and jointing.

Supply and fixing in rep for Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) 15mm size self-closing taps, cast copper alloy, chromium plated, screwed for iron pipe and fixed waste coupling of PTMT (half or full threaded) Minimum weight 32mm-45gms)

Material and labour for aluminium drapery rod outer dia 25mm with powder coated paint thickness welded MS pipe with corrugated PVC extrusion having plastic rings made of ABS plastic with outer dia 56-58 mm & inner dia 40-42mm . Brackets shall be at galvanised steel 1.6mm thick complete all as specified and directed.

Dismantaling of cast iron / RCC/ PVC drain pipes 75/110mm dia jointed in cement mortar and taking out from trenches or walls of any bore including fittings

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/walls bore of pipe 75 mm with PVC clamps and saddles

All as in item No (76) above but bore of pipe 110 mm

Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm

All as per item No. (78) above but bore of pipe 110 mm with access door

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm bore

All as per item No (80) above but bore of pipe 110 mm bore

Supply and fixing PVC (SWR) reducers 110 mm bore

Supply and fixing PVC (SWR) vent cowl bore of 110 mm bore

Supply and fixing PVC (SWR) bends any radius of bore 75 mm bore

Supply and fixing PVC (SWR) bends any radius of bore 110 mm bore

Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges

Supply and fixing in repair waste coupling 32 mm dia of PTMT (half or full threaded) minium weight 45 gram.

Supply and fixing in repair waste coupling 32 mm dia of chromium plated (half or full threaded) minium weight 75 gram.

Supply and fixing PVC flexiable pipe (Connecter) 15 mm dia, 450 mm long with check nut and bolt with washer all as specified

Material and labour for PVC waste pipe 32 mm dia flexible with cup & pressure rating 6 kgf/cm2 to fit wash hand basin waste coupling complete all as specified and directed by Engr-in-Charge.

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames).

All as per item (91) above but exceeding 1.5Sqm but not exceeding 4 Sqm each

Taking down shutters of any description not exceeding 1 Sqm each.

All as per item ser No. (93) above but exc. 1.0 sqm but not exc. 2.0 sqm each.

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, puttogether with glue pinned at joints, all as specified and directed.

Supply and fixing factory made, 2nd class hardwood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Supply and fixing 30mm thick flush shutters, solid core construction, with partical board core and plywood face panels, commercial type on with both face is covered with decorative face veneer with lipping/frame to match all as specified and directed.

Supply and fixing 30mm thick second class hardwood Glazed and skeleton shutters, divided into squares open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats incl hinges as per site requirement and all as specified and directed.

Supply and fixing Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, one single side prelam PVC sheet used instead of Plain colour sheet & edges will be painted to match with prelam sheet supplying & fixing in opening as per specification & drawing.

Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed by Engr-in-Charge.

Dismantling structural steel work including doors, gates but excluding framed truss etc.

Supply and fixing steel ventilators with top hung shutter (Single) including hinges, steel pegs, stay, MS handles etc complete all as specified and directed.

Material and labour for steel windows with side hung shutters(single) incl hinging devices and steel peg stay , MS handles etc complete with glazing bars dovetailed or welded all as specified and directed.

Supply and fixing Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

Hacking out old broken glass panes from metal frame including punching and drilling out and galzing pins/spring clip and S/F sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete.

Supply and fixing sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete.

Supply and fix 4mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing MS bends streps, hold fast or small articles confirming to Fe-410-0 or Fe-310-0 complete all as specified.

Material and labour PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in hold fast

Supply and fixing in repairs MS peg stay 300 mm long enameled black for steel windows with hindged joints etc

Supply and fixing in repairs MS Handles cast type enameled black 125 mm long for steel windows with necessary fittings

Supply and fixing in repairs Floor door stoper of alumunium alloy body and tongue, aodised with hard drawn steel spring, fixed in floor, 150mm size.

Supply and fixing 125 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed

Supply and fixing 150 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed

Supply and fixing 200 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed

Supply and fixing 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed

Supply & Fixing 150 mm size Aluminium handles, cast type, anodised

Supply & Fixing in repairs 125 mm size Aluminium handles, cast type, anodised

Supply and fixing in repairs 1st class softwood small fitting such as brackets of any type,latch and hinge blocks, shapeddoor and window stops and the like including allnecessary labours, articles not exceeding 200Cu.cm each

Supply and fixing Butt hinges, medium weight coldrolled mild steel and fixed 100mm size.

Supply and fixing Butt hinges, medium weight coldrolled mild steel and fixed 75mm size.

Supply and fixing Butt hinges, medium weight coldrolled mild steel and fixed 50mm size.

Resecuring or easing and adjusting wooden shutters of any description exc. 1 Sqm but n.exc. 2 Sqm each without taking down

Material and labour for servicing/ easisng of steel windows of size not exceeding 2 Sqm each including cleaning, scrapping, hacking, oiling, necessary welding, replacing broken hinges,handles ,stay etc and making good disturbed portion painting all as specified as directed by Engineer-in-charge

Dismantling boarding of any description and fixed in any position fixed with nails or screws.

Supply and fixing 18/19 mm thick Block boards, grade 2 quality interior grade decorative type with decorative face veneer on one face, fixed with screws to timber frame work for cupboard shutters, shelves and partition complete all as specified and directed

Supply and fixing anodised aluminium snap grid of size of grid 605 x 605mm frame work for false ceiling hanging with 4mm dia GI wire all as specified.

Supply and fixing 12mm thick perforated particle board/ tiles for insula-tion and accoustic purposes, 60x60 cm in size, fixed with nails to timber framework or with screws on snap grid all as specified and directed.

Supply and fixing mild steel ,bright finish continious piano hinge with flap size 30mm fixed as in repair.

Material and labour for preparation of new wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of wood primer on new surfaces all asspecified and directed

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash on walls

All as per item No (131) hereinbefore but one coat of white wash on Ceiling

Material and labour Preparation of old treated wooden surface exceeding 10 cm width and grith and applying one coat of synthetic enamel paint all as specified

Material and labour for preparation of old decorated surfaces of walls including cornices, pilasters etc (Plastered or un plastered surfaces) and applying one coat of cement base paint complete all as specified and as directed.

Material and labour for preparation of old surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed

Material and labour for preparation of old surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces and applying one coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed

All as per item No (136) hereinbefore but one coat of oil bound distemper on old wall surfaces including preparation of surfaces Washing, rubbing down and stopping of distempered and painted surfaces.

Material and labour for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint on old surfaces in any tint complete all as specified.

Material and labour for preparation of old decorated surface of walls and applying two coat of weather coat (ACE) exterior emulsion paint over a coat of primer all as specified and directed

Supply and fixing in repairs sink with drainage board made of stainless steel 1mm thick with plugs, washer and wastes including fixing in cement mortor 1:3 to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm,bowl size 410 mmx 330 mmx 160 mm including CP waste coupling all as specified.

Obliterating old writing of any description n.exc 0.1 Sqm, with paint to match existing work

Writing letters or figures (Block, roman, Italic or Indian) not exc 30 CM high

Material and labour French polishing on surfaces of any description, width or girth including cleaning and preparing the surfaces including a coat of wood filler on old work one or more coats

Supply and fixing 1.0mm thick Stainless steel Plate rack of size 900mm x 600 mm x 200mm deep with plate racks, spoon holders, shelves etc complete all as directed.

Supply and fixing in repair PVC water tank cover for 500 ltrs / 1000 ltrs capacity PVC water tank

Supply and fixing in repairs Rotational moulded Polyethylene water storage tank - 500 liters capacity (cylidrical vertical with double layered, threaded top cover) hoisted and fixed in position all as specified in SSR part I.

All as per item Ser No. (146) above but 1000 ltr capacity.

Supply and fixing in repairs 25 mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed of following sizes

Dismantling/disconnecting existing PVC water storage tanks of Capacity 500 Ltrs/ 1000 Ltrs for repairs and hoisting,reconnecting and re-fixing in position.

Material and labour for galvanised steel wire 3.15 or 4mm dia as in net wire in billets all as specified.

Supply and fixing for Anodised aluminium powder coating frame for doors, windows, ventilators etc with one or more rebates including joining cleat for fixing etc. complete all as specified

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

Supply and fixing 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5sq. m in each pane all as specified and directed.

Supply and fixing 12mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work or aluminium framed work all as specified and directed.

Material and labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and all as specified and directed.

Supply and fixing solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers

Supply and fixing in repairs of Brass CP mixer for mixing hot & cold water 15mm dia screwed down for iron pipe and fixed all as specified.

Supply and fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

Supply and fixing in repairs 150mm dia chromium plated towel ring fixed with and including chromium plated brass screws and cleats (Minimum weight 140gms)

Supply and fixing in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

Supply and fixing in repairs aluminium body (extruded section) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed

Supply and fixing in repairs 4 lever brass mortice lock, vertical type, size 100 mm

Supply and fixing in repairs plastic water closet seat cover , whiteor tinted, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device.

Supply and fixing 6 feet long pulley operated cloth drying system (ceiling mounted) of anodized aluminium pipes, each of outer dia 22mm and iner dia 19.8mm. Pulley made up of Delrin with rope guide mounted on channel pair of length 24" with adjustable distance between subsequent pipes and fixed in ceiling with self tapping screws of size 38mm x 8mm . Rope of polyester braided undyed of 4mm dia with knot locking system all as specified.

Material and labour for dewatering cleaning of service tanks with high pressure water jet to remove all masses,algade and dirt and removal of dirty water alongwith sludge using sludge machine and disposal of sludge to all at distance of n exc. 50 m and applying of anti bacterial sterlization spray to walls, floors and ceilings and finally washing with fresh water complete of the RCC/Ferro service tank of capacities of 200 to 500 Ltr all as specified. Note for item no-(1 to 8) :- (i) Rate incl cleaning of outlet pipe upto stop cock/gate valve by removing and refixing the same and making the line serviceable after cleaning.if any part is damage during disconnecting the tank will be replaced with extra charges. (ii) Writing letters like date of cleaning with white synthetic enamel paint by using stencils etc all as specified and directed by Engineer in charge shall be deemed to be included in the quoted rate. (iii) Note for Item No 6 to 8 binding the tank cover with tank using GI wire for proper closing of the tank.

All as per item No 165 above but RCC/Ferro tank capacity 501-1000 Ltrs.

All as per item No 165 above but RCC/Ferro tank capacity 1001-2000 Ltrs.

All as per item No 165 above but RCC/Ferro tank capacity 2001-5000 Ltrs.

All as per item No 165 above but RCC/Ferro tank capacity 5001-25000 Ltrs.

All as per item No 165 above but PVC tank capacity 200-500 Ltrs.

All as per item No 165 above but PVC tank capacity 501-1000 Ltrs.

All as per item No 165 above but PVC tank capacity 1001-5000 Ltrs.

Supply and fix in repairs lids for polyethylene water storage tanks,threaded or hinged type as per existing incl PTMT nuts/binding wire complete all as specified and directed by Engineer-in Charge suitable for upto 1000 Ltrs cap of tanks. (Make- Sintex )

All as per item no-173 above but suitable for 1001 to 5000Ltrs tank capacity

Material and labour for preparation of old painted surface by brooming down and scrubbing with steel wire brush, scraping distempered and painted surface and apply two coats of cement base paint on the RCC/Ferro service tank capacity of 200 to 500 Ltrs.

All as per item No 175 above but RCC/Ferro tank capacity 501-1000 Ltrs.

All as per item No 175 above but RCC/Ferro tank capacity 1001-2000 Ltrs.

All as per item No 175 above but RCC/Ferro tank capacity 2001-5000 Ltrs.

All as per item No 175 above but RCC/Ferro tank capacity 5001-25000 Ltrs.

S & F in repairs Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms).

All as per item No 180 above but fixed with the 25 mm bores (Minimum weight 25mm-455gms).

All as per item No 180 above but fixed with the 40 mm bores (Minimum weight 40mm- 690 gms).

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if requiredreconnecting and re-fixing inposition of cap up to 500 Ltrs. (Cleaning repairing, etc. measured separately)

All as per item No 183 above but of cap up to 1000 Ltrs.

All as per item No 183 above but of cap up to 2000 Ltrs.

Dismantling water tanks of cap up to 500 Ltrs and removing to store.

All as per item No 186 above but of cap up to 1000 Ltrs.

All as per item No 186 above but of cap up to 2000 Ltrs.

Supply and fix PVC water tank 2000 Ltrs Capacity Rotational moulded polye-thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, complete all as directed incl disconnecting existing tank of any description and capacity.

Supply and fixing in repair Nipple suitable for HDPE water tank.(Minimum weight 20 mm- 45gm).

Supply and fixing in repair Nipple suitable for HDPE water tank (Minimum weight 25mm- 65g).

Cutting of existing steel tubing for alterations or additions (Each cut measured) of bore of pipe15 mm.

All as per item No 192 but of size 20 mm

All as per item No 192 but of size 25 to 32 mm

All as per item No 192 but of size 40 to 50 mm

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector of bore of pipe15 mm.

All as per item No 196 but of size 20 mm

All as per item No 196 but of size 25 to 32 mm

All as per item No 196 but of size 40 to 50 mm

Material and labour in repair GUN metal globe or gate valves with iron wheel srewed both end for iron pipe and fixes of size 20 mm complete all as specified and directed. Make- Zoloto or equivalent.

All as per item No 200 above but of size 25 mm.

All as per item No 200 above but of size 40 mm.

All as per item No 200 above but of size 50 mm.

Supply and fixing in repair Bib taps chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of size 15 mm. Make- Jaguar/Konter/Cera.

Taking up or down steel tubing and connections, including cleaning for re fixing or removal to store Supply & Fix GI tubing medium grade of size 15 mm bore with all fittings on wall complete including cutting and thereading all as required at site complete all as specified directed.

All as per item no 205 above but of size 20 mm bore.

All as per item no 205 above but of size 25 mm bore.

All as per item no 205 above but of size 40 mm bore.

All as per item no 205 above but of size 50 mm bore.

Taking up or down steel tubing of size 40 or 50 mm bore. mm and connections, including cleaning and refixing old teel tubing and connections in new or old position (Walls, ceiling, floors, etc.)

SRI GANESH ENTERPRISES

SHIVAA CONSTRUCTIONS

Maruthi constructions