Link road from Baircha to Bagriwas.

Amount

Cutting in earth work and disposal of excavated earth upto a lead of 20 meters

Earthwork in excavation for foundation of structures upto 3 m depth as per drawing and technical specification Clause 305.1 includding setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material.

Providing and laying cement concrete 1:4:8 (1 cement :4sand :8 graded stone aggregate40 mm nominal size) and curing complete including cost of centering and shuttering in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means.

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 (By mechanical means) as per Technical Specification Clause 404. including carriage of materials in all leads and lifts including mechanical means.

Providing and applying priming coat with Bitumen emulsion ( SS- 1 ) on prepaired surface of granular base including cleaning og road surface and spraying primer at the rate of 0.70-1.0 kg /sqm. using mechanical means as per Technical Specification Clause 502

Providing and applying tack coat with Bitumen emulsion ( RS- 1 ) uasing emulsion distributor at the rate of 0.20-0.25 kg /sqm. on the prepaired bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503

Providing and laying Plain/reinforced cement concrete in open foundations complete as per drawings and technical specifications clauses 802,803,1202 &1203 P.C.C. 1:3:6 grade M -10. including cost of form work, centering, shuttering etc.

Providing weep holes in brick masonary/stone masonary, plain/ reinforced concrete abutment , wing wall, return wall, with 100mm dia PVC pipe extending through the full width of the structures with slope of 1(V) 20 (H) towards drawings face complete as per drawing and technical specifications clauses 614,709,1204.3.7

Back filling behind abuntment , wing wall and return wall complete as per drawings and Technical Specification Clause

Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1108. ( A ) 900 mm dia

Wire crates made of G.I. wire filled with boulders with square cut faces against the ….wire (Boulder filling to be measured and paid for separetaly).G.I. Wire 4 mm thick...corresponding to SWG-8 15cm. x 15cm. mesh.

Wire crates of G.I. wire filled with boulders with square cut faces against the wire. (Wire crates to be measured and paid for separately).

Providing and laying Dense Graded Bituminous Macadam laying with paver finisher equiped with electronic sensor laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions ofdensity, complete as per specificatons and directions of Engineer-in-Charge. with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity ( 16.54.1)

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required .grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge.40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix

Jagtar Singh

MANPREET KUMAR GOVT. CONTRACTOR

BHAJAN SINGH GOVT CONT

RAJESH KUMAR GOVT CONTRACTOR