Mumbai Central (MMCT):-(1) Modernization, Upgradation, Renovation of TTE Running Room at station building. (ii)Repair & Renovation of TPC office at Annex building. (DRM office complex)

Item Breakup - A-All DSR-23 Items

prepare the surface even and smooth complete. 13.44S EXTERIOR FINISHING Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.1 Two or more coats applied on walls @ 1.25 Sqm 7579 193.7 1468052.3 4 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per 13.52 manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. 5 13.52.1 On steel work Sqm 1865 241.75 450863.75 Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 6 13.61.1 Two or more coats on new work Sqm 198 155.9 30868.2 Total 4097399.05 Item- 9 Chapter-15 S No. Item No Description of Item Unit Qty Rate Amount 15.0 DISMANTLING AND DEMOLISHING 15.1S General Demolishing cement concrete manually/ by mechanical means including disposal of 15.2 material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including cum 1.5 2434.25 3651.38 1 equivalent design mix) MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Demolishing brick work manually/ by mechanical means including stacking of 15.7 serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 2 15.7.4 In cement mortar cum 5 2060.2 10301 Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 3 15.12.1 Of area 3 sq. metres and below Each 40 367.2 14688 Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 4 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 2649 73.4 194436.6 15.56 Dismantling old plaster or skirting raking out Sqm 1866 54.65 101976.9 joints and cleaning the surface for plaster 5 including disposal of rubbish to the dumping ground within 50 metres lead. 15.57 Dismantling aluminium/ Gypsum partitions, Sqm 280 56.35 15778 doors, windows, fixed glazing and false ceiling 6 including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. 15.60 Disposal of building rubbish / malba / similar cum 1200 263.95 316740 unserviceable, dismantled or waste materials by mechanical means, including loading, 7 transporting, unloading to approved municipal dumping ground or as approved by Engineer-in- charge, beyond 50 m initial lead, for all leads including all lifts involved. Total 657571.88 Item- 10 Chapter-16 S No. Item No Description of Item Unit Qty Rate Amount 16.0 ROAD WORK 16.49S MISCELLANEOUS Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar 16.87 locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in- Charge. 16.87.1 With granite stone of colour black, cherry/ruby Sqm 51 4950.9 252495.9 1 red of area less than 0.50 sqm. Total 252495.90 Item- 11 Chapter-17 S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.1 manually controlled device (handle lever) conforming to IS : 7231,with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: 17.1.1 White Vitreous china Orissa pattern W.C. pan of Each 7 6767.4 47371.8 1 size 580x440 mm with integral type foot rests MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 10 6515.55 65155.5 2 seat and lid Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing 17.4 cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 17.4.1 One urinal basin with 5 litre white P.V.C. Each 8 6258.75 50070 3 automatic flushing cistern Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.6 White Vitreous China Angle back wash basin Each 10 1756.85 17568.5 4 size 400 x 400 mm with single 15 mm C.P. brass pillar tap Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, 17.10 including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 5 17.10.1.1 510x1040 mm bowl depth 250 mm Each 4 6945.6 27782.4 17.22A Providing and fixing CP Brass 32mm size Bottle Each 10 1034.8 10348 6 Trap of approved quality & make and as per the direction of Engineer-in-charge. 17.22B Providing and fixing CP Brass Single lever Each 10 6940.75 69407.5 telephonic wall mixer of quality and make as 7 approved by Engineer in charge.(a) 15 mm nominal dia 17.23 Providing and fixing white vitreous china flat Each 2 1648.95 3297.9 back or wall corner type lipped front urinal 8 basin of 430x260x350 mm or 340x410x265 mm sizes respectively. Providing and fixing P.V.C. waste pipe for sink 17.28 or wash basin including P.V.C. waste fittings complete. 17.28.1 Semi rigid pipe 9 17.28.1.2 40 mm dia Each 10 116.7 1167 Providing and fixing mirror of superior glass (of approved quality) and of required shape and 17.32 size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 10 17.32.2 Rectangular shape 453x357 mm Each 5 1361.8 6809 11 17.32.4 Rectangular shape 1500x450 mm Each 5 2093 10465 Total 309442.60 Item- 12 Chapter-18 S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the 18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 1 18.7.1 15 mm nominal dia Pipes Metre 150 286.8 43020 2 18.7.2 20 mm nominal dia Pipes Metre 130 335 43550 3 18.7.3 25 mm nominal dia Pipes Metre 125 401.55 50193.75 4 18.7.4 32 mm nominal dia Pipes Metre 100 518.75 51875 5 18.7.6 50 mm nominal dia Pipes Metre 75 934.15 70061.25 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 6 18.8.1 15 mm nominal dia Pipes Metre 50 497.8 24890 7 18.8.2 20 mm nominal dia Pipes Metre 150 537.6 80640 8 18.8.3 25 mm nominal dia Pipes Metre 25 627.25 15681.25 18.15S BRASS FITTINGS Providing and fixing brass bib cock of approved 18.15 quality : 9 18.15.1 15 mm nominal bore Each 10 353.25 3532.5 Providing and fixing brass stop cock of 18.16 approved quality : 10 18.16.1 15 mm nominal bore Each 10 353.25 3532.5 Providing and fixing gun metal gate valve with 18.17 C.I. wheel of approved quality (screwed end) : 11 18.17.1 25 mm nominal bore Each 4 622.4 2489.6 12 18.17.3 40 mm nominal bore Each 3 826.1 2478.3 13 18.17.4 50 mm nominal bore Each 2 1026.65 2053.3 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 15000 11 165000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable locking 14 arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass angle valve for 18.53 basin mixer and geyser points of approved quality conforming to IS:8931 15 18.53.1 15mm nominal bore Each 20 574.3 11486 18.59S AIR VALVE & WATER METER (BULK TYPE) 18.65 Providing and fixing PTMT soap Dish Holder Each 15 111.45 1671.75 having length of 138mm, breadth 102mm, 16 height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. Providing and fixing unplasticised P.V.C. 18.74 connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 17 18.74.2 15 mm nominal bore with 45 cm length Each 20 121.9 2438 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY Total 574593.20 Item- 13 Chapter-21 S No. Item No Description of Item Unit Qty Rate Amount 21.0 ALUMINIUM WORK 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 50 495.05 24752.5 1 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 21.1.1.2 Powder coated aluminium (minimum thickness Kg 50 530.9 26545 2 of powder coating 50 micron) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 54 1505.25 81283.5 3 (weight not less than 12.50 kg/sqm) 21.3.3 With float glass panes of 8 mm thickness Sqm 59 1685.4 99438.6 4 (weight not less than 20 kg/sqm) Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing 21.8 weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. 5 21.8.1 Upto 5mm depth and 5 mm width Metre 165 96.75 15963.75 21.13 Providing and fixing Brass 100mm mortice latch Each 20 528.85 10577 and lock with 6 levers without pair of handles 6 (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 21.17 Providing and fixing anodised aluminium grill Kg 405 638.35 258531.75 (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre 7 to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). Total 517092.10 Item- 14 Chapter-22 MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY S No. Item No Description of Item Unit Qty Rate Amount 22.0 WATER PROOFING 22.1S General 22.5 Providing and laying water proofing treatment Sqm 157 617.05 96876.85 in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second 1 layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. Total 96876.85 Item- 15 Chapter-26 S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS 26.1S General Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate 26.26 cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. 26.26.2 With fully perforated 12 mm thick micro tegular Sqm 152 1907.35 289917.2 1 edged or 10 mm thick square edged GRG false ceiling tiles. 26.28S REPAIR AND REHABILITATION ITEMS Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders 26.28 of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge MUMBAI CENTRAL DIVISION-ENGINEERING/WESTERN RLY 2 26.28.3 25 mm average thickness Sqm 2291 126.75 290384.25 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and 26.29 removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In- Charge. 3 26.29.1 Bars upto 12 mm diameter Metre 350 8.25 2887.5 4 26.29.2 Bars above 12 mm diameter Metre 200 16.45 3290 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC 26.31 as per specifications and direction of Engineer- In-charge complete in all respect. 26.31.2 Epoxy bonding adhesive having coverage 2.20 Sqm 2291 285.2 653393.2 5 sqm/kg of approved make Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre- measurement of thickness shall be done just 26.32 after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2). 6 26.32.2 25 mm average thickness in 2 layers. Sqm 2291 587.35 1345618.85 Providing, erecting, maintaining and removing temporary protective screens made out of specified fabric with all necessary fixing 26.36 arrangement to ensure that it remains in position for the work duration as required by the Engineer-in-charge. 7 26.36.1 Wooven PVC cloth Sqm 774 54.25 41989.5 Total 2627480.50

Item Breakup - B-All NS Items

19 mm marine ply conforming to IS 710

12 mm marine ply conforming to IS 710 Total 233621.30

Supplying ,cutting and fixing adjustable aluminium louvers of 100 mm blade with 1 suitable handle and fixing4mm thick glass sheets in louvers blades of approved quality with five joints etc. complete(Payment will be made in sqm i.e. area of clear opening shall be measured correct to two places of decimal

Providing and Fixing Two way bib cock chromium plated (toilet bib) of jacquar make code No- 041/Marc Series No- MOR1380 or similar as approved by engineer in charge with all contractor's material, labour, tools & plants etc. complete with all lead & lift

Providing and Fixing Spray hose chromium plated of jacquar make code No. 563 /MarcSerise No. MAC-3050 or similar as approved by engineer in charge with all contractor's material, labour,tools & plants etc. complete with all lead & lift

Providing and fixing Towel rack chromium plated with of Jaquar continental series No.1181/Marc series No.MOR-4090 . Rate includes cost of all materials, labours, T&P, transportation, lead, lift, taxes, cotroi etc. complete. As directed by engineer

Supplying and fixing counters/cupboards made of marine ply of kit ply gold or Gujran ply or similar conforming to IS 710 as per following description .The top shall be supported by vertical supports of marine ply and fixed tow all without any gap. Drawers with wooden knobs, locking arrangements and sliding arrangements consisting of PVC sliding rollers on aluminium angles 6 shall be provided as per approved drawings. Shelves as per approved drawings below the working platform with horizontal and vertical dividers, shutters of marine ply with brass hinges, wooden knobs and locking arrangements with brass locks shall be provided. Cost of providing veneer, polishing and CT wood work involved will be paid separately. Payment will be made for actual area of marine ply and used in the work as per following items and no extra payment will be made for fittings, sliding arrangements etc.

Supply and Fixing Roller blind as per sample available at SSE(W) includingallcontractor's labour, tools and plants,etc., all leads, lifts, transport, taxes etc., complete

Providing& Fixing STONESLABS/TILES(capable of taking good polish) laid over 12mm 8 thickbase of cement mortar 1:3 andjointed with neat cement slurrymixed with pigment to match theshade of tiles including rubbingand polishing ,etc. complete. Therate includes all labour, material,T&P, Lead and lift.transportation , all taxes etc.complete. (a) Cudappa stone slabs/tiles 20mm to 25mm of indado, skirting and other vertical surface

Supplying & fixing WASH BASIN TABLE TOP ADMIRAL COLLECTION of BELL CERAMIC 9 or similar ofsize570mm x 425mm x 175mm, approved quality & colour with CP brass waste coupling, PVC connection etc with complete fittings .The rate shall include cost of all materials, labour,tools& plants and with all lead, lift, transportation, taxes etc complete

Providing and applying high polymer based damp shield of Nostrum/Raincoat of 10 Pidilite or similar material for two coats. The rate is inclusive of scaffolding, material, labour, T&P etc. complete. Note:- No work is to be carried on already plastered surface

Providing and Fixing Pillar Cock chromium plated (mixer) for wash basin jacquar makecode No-167/Marc series NO. MOR-1100 or similar as approved by engineer incharge with all contractor'smaterial, labour, tools & plants etc. complete with all lead & lift

Providing and Fixing shower rose chromium plated with bracket of jacquar make codeNo 491/Marc series No- MOR-1240 & MOR 1260 or similar as approved by engineer in charge with allcontractor's material, labour, tools & plants etc. complete with all lead & lift

Supply and Laying 8mm thick laminated wood pattern plank floor with tounge and 13 groove arrangement of approved shed and quality similar to 'Pergo' family brand or similar, complete in all respect with all contractors materials, labour leads, lifts, wastages including levelling of existing surfacePOPwherever required Above/

Supply of material and providing light/fan point concealed wiring, with single core 1 multi-strand copper wire, PVC insulated unsheathed, LSHF / ZHFR, of size 1.5 sq.mm. for phase, neutral & earth wire and modular switches, complete with all accessories, junction box, ceiling rose etc, as per specifications in Annexure I. Running

Supply of material and providing main/ submain concealed wiring with single core multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 2.5 sq.mm., with set of 3 wires for phase, neutral & earth wire, as per specifications in Annexure II. Running

Supply of material and providing main/ submain concealed wiring with single core multi-strand copper wires, PVC insulated unsheathed, LSHF / ZHFR, of size 4.0 sq.mm., with set of 3 wires for phase, neutral & earth wire, as per specifications in Annexure II.

Supply and fixing of modular concealed mounting box of four module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III.

Supply and fixing of modular concealed mounting box of six module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III

Supply and fixing of modular concealed mounting box of twelve module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III.

Supply and fixing of modular concealed mounting box of sixteen module, with suitable modular base plate and cover, for fixing of modular switches, sockets etc., as per specifications in Annexure III.

Supply, fixing, testing & commissioning of modular power socket 3 pin twin heavy duty of 10/20A capacity with 20A one way modular switch having neon indicator, as per specifications in Annexure IV.

Supply, fixing, testing & commissioning of DP MCB (6-40A) in m.s. enclosure, as per specifications in Annexure V.

Supply, fixing, testing & commissioning of 63A 4P MCB with m.s. enclosure, as per specifications in Annexure VI.

Supply, fixing, testing & commissioning of MCB DB single phase with RCCB in m.s. enclosure, I/C-DP MCB of 40A-1No.& DP RCCB of 40A 1No., O/G:SP MCB of 6A-32A-8Nos.,as per specifications in Annexure VII.

Supply, fixing, testing & commissioning of MCB DB three phase with RCCB, in m.s. enclosure, outdoor type, I/C-FP MCB of 63A-1No.& FP RCCB of 63Amp-1No and O/G:SP MCB of 10- 32Amp-12Nos,as per specifications in Annexure VIII

Supply, fixing, testing & commissioning of MCB DB single phase with RCBO, m.s. enclosure, I/C-DP RCBO of 40Amp-1No, O/G:SP MCB of 6A 32A - 8Nos, as per specifications in Annexure IX

Supply, fixing, testing & commissioning of MCB DB three phase with RCBO,in m.s. enclosure, outdoor type, I/C-FP RCBO of 63Amp-1No and O/G: SP MCB of 10-32 Amp - 12Nos, as per specifications in Annexure X.

Supply, fixing, testing & commissioning of 25A 4P RCCB with 30mA sensitivity, in m.s. enclosure, as per specifications in Annexure XI.

Supply, fixing, testing & commissioning of Geyser, storage type of 10 ltrs capacity, as per specifications in Annexure XII.

Supply, fixing, testing & commissioning of electric insect killer / fly catcher machine of size 18"-24"approx. with 2nos. ultra violet tube lights of 15-20W each, suitable to work on 230V 17 AC supply & with HT current electrified grid system, complete with removable collection tray with protective tray lock, hanging chain etc. Insect killer machine shall be connected with the supply point using PVC insulated & sheathed, FRLS wires, 1100 volt grade confirming to IS:694 of 2010 or latest / IEC / NEC/NFPA Standards and ISI marked, with proper workmanship.

Supply, fixing, testing & commissioning of USB power charger Hub/ device enclosed inside the frame on the top, 5.2V DC/min.20A,8 port (vertical) with reversible compatibility, input 18 voltage: 110-290VAC, voltage surge protector for input voltage more than 290V AC, 1.5mtr. Cable length, blue coloured LED display for current & voltage at each port and smart chip for calibrating the current required on each port, metal holder attached with USB device to keep 8 mobile phones. Min size: 580mm x 400mm x 2mm thick. Make: Millenium, Legrand, Schneider, GM.

Supply of energy efficient BEE5 star rated BLDC ceiling fan 1200mm (48") sweep, with down rod and standard accessories, fan & regulator shall be compatible to work with various makes & models, as per specifications in Annexure XIII. (Minimum Warrantee - 2 years

Supply of energy efficient BEE 5star rated ceiling fan 600mm (24") sweep with down rod and standard accessories, fan shall be compatible to work with various makes & models of electronic regulators, as per specifications in Annexure XIV. (Minimum Warrantee - 2 years)

Fixing & commissioning of ceiling fan on existing M.S. hook: 1.The fan shall be installed complete with accessories & safety device e.g down rod, blades, canopies, rubber insulator, split pin & nut bolt with spring washers. If required size and length of down rod is different than 21 original OEM make, then down rod will be supplied by the Railway. 2. The fan shall be connected with the supply point (within 3 mtr distance) using PVC insulated & sheathed copper wire 03 core 1.5mm2 size, LSHF/ZHFR, conforming to IS 694/2010 or latest and ISI marked, in PVC pipe or as per site conditions, with proper workmanship.(The ceiling fans will be supplied by Railways, transportation to site will be done by the firm from Mumbai central).

Supply, fixing, testing & commissioning of 5 step fan regulator electronic modular stepped type, compatible to work with various makes & models of BLDC ceiling fans: 1. Ceiling fan's 22 electronic modular stepped type regulator shall be of minimum 100 watts capacity suitable to work on 230 volts single phase AC supply. 2. Regulator should be compatible to work with various makes & models of BLDC ceiling fans. 3. Stepped regulator shall be fixed on modular board & connected with ceiling fan's piano controlling switch, shall be suitable for flush mounting on switch board, necessary internal wiring is included in the scope of work.

Supply and fixing of ceiling fan down rod, heavy duty, white colour, rod size 2 feet length, 19 mm dia., 1.4 mm thickness, made of CRC Cold Rolled Coil or Cold Rolled Steel material.

Supply, fixing, testing & commissioning of energy efficient BEE 5 star rated BLDC ceiling fan 1200mm ( 4 8 " ) sweep with down rod, modular electronic regulator and standard accessories, fan & regulator shall be compatible to work with various makes & models, as per specifications in Annexure XV. (Minimum Warrantee - 2 years)

Supply, fixing, testing and commissioning of exhuast fan 8"/9" of plastic blade, as per specification given in Annexure XVI.

Supply, fixing, testing & commissioning of super energy efficient BLDC motor industrial exhaust fan of size 300mm (12") sweep and standard accessories, as per specifications in Annexure XVII. (Minimum Warrantee - 2 years)

Supply, fixing, testing & commissioning of wall bracket fan of size 16"/400mm sweep 27 and 1350 rpm: The bracket fan shall be of plastic material, oscillating type with 03 blades, with BLDC motor, power consumption 35W max., air delivery 75 Cu.Mtr./ Min., suitable to work on 230 volts, 50 HZ AC supply. The fan shall be fixed on the wall with proper fixing arrangement/ suitable size fasteners arrangement / M.S. bracket rag bolts of suitable size to withstand the weight and thrust.

Supply and providing Pedestal fan size 16"/400mm sweep, BLDC motor, with 28 regulator: The pedestal fan shall be of plastic material, 16"/400mm sweep, 1350 rpm (min.), Minimum air delivery 75 Cu.Mtr./Min., complete with BLDC motor & regulator; power consumption 35W max, adjustable pedestal 03 blades, Fan Body & blade material - Rust Proof Polypropylene, and PVC copper flexible cable of adequate size, suitable to work on 230V 50 HZ single phase AC supply.

Dismantling / removing of existing different types of electrical fans with fixing clamps 29 etc., of various sizes / capacities, including dismantling from platform sheds, other buildings etc., shifting of released materials upto stores in the nearby station area, with own laboures, tools & tackles etc., as per Annexure XVIII.

Dismantaling / removing of existing different types of electrical light fittings of various sizes / capacities, including dismantling from platform sheds, other buildings etc., shifting upto stores in the nearby station area, with own laboures, tools & tackles etc., as per Annexure XIX.

Supply,fixing, testing & commissioning of LED reading light fitting of 3W (minimum), 31 robust driver with wide voltage range 100-240 volts and inbuilt protection, protected from dust and insects, complete with cover/ accessories, control switch on the base etc. Fitting shall be as per sample approved, and fixed with proper workmanship and wiring.

Supply,fixing, testing & commissioning of LED night light/ foot light fitting of 4W/ 32 modular type of 3 module, robust driver with wide voltage range 100-240 volts and inbuilt protection, protected from dust and insects, complete with cover/ accessories etc., as per model no.673036 / 675597 of Legrand or similar or as per sample approved. Fitting shall be fixed with proper workmanship and wiring.

Supply, fixing, testing & commissioning of LED for use atop mirrors, with small-to- mid-sized vanity cabinets, or over wash basins. Effective heat dissipation with extruded aluminum 33 heat sink, Robust driver with wide voltage range 100-240 volts and inbuilt protection, protected from dust and insects, Waterproof moisture anti-fog anti-corrosion anti-rust, complete with cover/ other accessories etc. Luminous efficacy 90 Lumen/ Watt. Metal frame in chrome finish with glass/ acrylic diffuser. Colour temperature: between 2700K - 3500 Kelvin (Warm White). Fitting shall be as per sample approved, and shall be fixed with proper workmanship and wiring.

Supply, fixing, testing & commissioning of indoor type LED luminaires 20W (maximum, including driver), 4 ft long, System efficacy greater than or equal to 110 lm/W, Lumen 34 Output 2000 lumens, Colour consistency CRI 80, Driver Surge protection 2.5KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). Luminaires complete with all accessories and other specifications as per Annexure XX. (Minimum Warrantee - 5 years)

Supply, fixing, testing & commissioning of indoor type LED luminaires 20W maximum, 4 ft long, having inbuilt auto dimming driver and sensor, System efficacy greater than or equal to 110 lm/W, Lumen Output 2000 lumens, Colour consistency CRI 80, Driver Surge protection 2.5KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site). The sensor should have a coverage area of minimum 5m radially when mounted at 2.5m height from ground level. Luminaires complete with all accessories and other specifications as per Annexure XX. (Minimum Warrantee - 5 years)

Supply,fixing, testing & commissioning of indoor type LED luminaires 20-25W (maximum 25W, including driver), 8"x 8" size, recess mounting type, System efficacy greater than 36 or equal to 100 lm/W, Lumen Output 2400 lumens, Colour consistency CRI 80, Driver Surge protection 2.5KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site. Luminaires complete with all accessories and other specifications as per Annexure XX.

Supply,fixing, testing & commissioning of indoor type LED luminaires 40W maximum, 37 2'x2' size, recess mounting type, System efficacy greater than or equal to 100 lm/W, Lumen Output 3500 lumens, Colour consistency CRI 80. Driver Surge protection 2.5KV. Luminaire should have Class B serviceability (i.e., the driver can be replaced or maintained at site) Luminaires complete with all accessories and other specifications as per Annexure XX. (Minimum Warrantee - 5 years) Square

Survey, design, manufacture, display of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on 38 monomeric calendered vinyl of 70 Micrometer thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. In case of double sided glow sign, the quantity will be counted as 1.3 times of the schedule quantity. Details as per specifications in Annexure XXI. Square

Erection and installation of wall / hanging / floor mounting type LED illuminated sign / direction boards in half elliptical shape. The display sheet shall be of unbreakable 040 translucent polycarbonate sheet of 2 mm thickness. The text / graphics matter visibility shall not be less than 160 deg. The approved colour text and graphics shall be printed / router cut on monomeric 39 calendered vinyl of 70 Micrometer thickness and shall be firmly pasted on display sheets. The mounting arrangement shall be hanging, wall mounting, ceiling mounting, pole mounting or floor mounting and as per site requirement. The signage shall have the integral mounting arrangements with sturdy structural frame and ACP cladding on the back side of the signage to avoid rusting and entry of dust. The LED board shall have uniform illumination with 4-8 W / sq. ft and with brightness more than ambient light. Suitable size end cap of 1.5 mm thick SS 304 should be provided. In case of double sided glow sign, the quantity will be counted as 1.3 times of the schedule quantity. Details as per corresponding specifications in Annexure XXI.

Supply, fixing, testing and commissioning of thyristor SCR based hot standby switch with triple lnput (Master/ Slavel/ Slave-l) & Single output (P+N+G), of capacity 6 KVA, 20 Amp, Single phase, as per specifications in Annexure XXII. (24 Months Warranty).

Supply, fixing, testing and commissioning of 125A, 4 pole electronic / microprocessor 41 based MCCB, with inbuilt earth fault protection along with earth leakage protection having shunt coil, earth leakage relay 30mA -30A CBCT etc., in sheet steel enclosure, as per specifications in Annexure XXIII.

Supply, fixing, testing and commissioning of 400A, 4 pole electronic / microprocessor 42 based MCCB, with inbuilt earth fault protection along with earth leakage protection having shunt coil, earth leakage relay 30mA -30A CBCT etc., in sheet steel enclosure, as per specifications in Annexure XXIII.

Design, fabrication, supply, erection, testing and commissioning of outdoor type 3 Phase LT distribution panel board comprising of the following switchgears/ accessories: Incoming - MCCB, 4-pole, 125 Amp, with thermal-magnetic release range 100 - 125 Amp, having 35 KA breaking capacity = 1 No. Outgoing - MCCB 4-pole, 63 Amp, with thermal magnetic release range 50 - 63 Amp, having 35 KA breaking capacity = 2 Nos., MCB TPN 32 Amp having 10 KA breaking capacity = 10 nos. MCB DP 10 Amp having 10 KA breaking capacity = 4 nos. Panel shall be complete with copper busbar, spreader terminals, handle, meters, indication lamps & other accessories, as per specifications in Annexure XXIV.

Design, fabrication, supply, erection, testing and commissioning of outdoor type 3 Phase LT distribution panel board comprising of the following switchgears/ accessories: Incoming - MCCB, 4-pole, 250 Amp, with thermal-magnetic release range 200 - 250 Amp, having 35/36 KA breaking capacity = 2 Nos. Automatic Changeover Switch 250A with inbuilt Time delay, primary 44 protection against single phasing, over voltage - 01 No., Busbar - 300A capacity Outgoing - MCCB 4- pole, 200 Amp, with thermal magnetic release range 160 - 200 Amp, having 35/36 KA breaking capacity = 1 No., MCCB 4-pole, 125 Amp, with thermal magnetic release range 100 - 125 Amp, having 16 KA breaking capacity = 2 Nos., MCCB 4-pole 100 Amp, with thermal magnetic release range 80 - 100 Amp having 16 KA breaking capacity = 3 Nos. Panel shall be complete with copper busbar, spreader terminals, handle, meters, indication lamps & other accessories, as per specifications in Annexure XXIV.

Provision of new fire extinguishers, 6 KG DCP type, as per specifications in Annexure XXV.

Provision of new fire extinguishers, 4.5 KG CO2 type, as per specifications in Annexure XXVI.

Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded aluminum conductor cable of size 25 sq.mm.x 4 core, as per specifications in Annexure XXVII.

Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded copper conductor cable of size 10 mm² x 4 core, as per specifications in Annexure XXVII.

Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded copper conductor cable of size 35 mm² x 4 core, as per specifications in Annexure XXVII.

Supply of XLPE insulated, PVC sheathed, armoured 1.1 KV grade, multi-stranded copper conductor cable of size 50 mm² x 4 core, as per specifications in Annexure XXVII.

Supply of material & saddling to the cables with GI saddles, as per specifications in Annexure XXVIII.

Supply and installation of GI Cable raceway of size 100 (width) x 50mm (height), 1.6mm/ 16 SWG thickness, non-perforated, complete with accessories such as clamps, fasteners, nut 52 bolts, bends and covers to ensure secure mounting and protection of wires/ cables. Necessary masonry, carpentry and civil works such as cutting opening in the floor, walls, internal partitions, RCC slabs, making of holes etc. as per site requirement for execution of the proposed work for fixing of the race way, making them good by re-plastering/ finishing, painting of walls/ceiling, cleaning of site etc. shall be done by the Contractor, with supply of all required materials.

Removing of old/ defective/ unused PVC insulated and armoured cables of different sizes upto 120 sq.mm., as per specifications in Annexure XXIX.

Supply of material & installation of maintenance free earth electrode of length 3 meter, including earth enhancement material for earthing for each electrode & other accessories as per Drg. No. SDO/ RDSO/ E&B/001 and RDSO Spec No. RDSO/SPN/197 /2008, as per Annexure XXX.

Supply, fixing, testing & commissioning of G.I. strip 25mm x 6mm for earthing, including cutting, bending, welding, excavation etc., as per specifications in Annexure XXXI.

Supply & fixing of PVC casing & capping of size 50mm x 100mm with all accessories for covering of cables/ wires etc., as per specifications in Annexure XXXII.

Supply, fixing, testing and commissioning of air curtain 3 ft. long as per specifications in Annexure XXXIII.

Supply, erection, testing & commissioning of 150mm dia. (V6) vertical energy 58 efficient multistage submersible pump set of capapcity suitable to deliver water at the rate of 180 to 140 LPM to the head of 155 to 177 Mtr., motor power rating of 7.5 HP/5.5 KW approx., 415V, 3ph, 50 Hz, etc., having water filled cooling, B class insulation, IP 68 protection, complete with all accessories, as per specifications in Annexure XXXIV.

Supply, fixing, testing & commissioning of fully automatic programmable digital control panel for pumpsets of capacity upto 7.5HP, 3-phase, 440V AC with micro-processor based 59 technology, inbuilt Single Phase Protection, Water Level Guard, Dry Run Protection, Reverse Phase Protection, Overload, Under Voltage / Over Voltage Protection, inbuilt DOL starter, Digital Ammeter, LED screen etc in mountable sheet steel encloser IP 54 protection, with lock & key arrangement, complete with all accessories, as per Annexure XXXV.

Supply, installation, testing and commissioning of submersible flat copper cable, PVC insulated & sheathed, 3 core x 2.5 sq.mm. size, as per specifications in Annexure XXXVI.

Supply of energy efficient window type air conditioner unit of capacity 1.5 TR, having min. ISEER 3.55, as per specifications in Annexure XXXVII.

Installation, testing & commissioning of window AC units of capacity 1.0TR/ 1.5TR/ 2TR at the nominated site, as per specifications in Annexure XXXVIII.

Supply of energy efficient inverter type split air conditioner unit of capacity 1.5 TR, having min. ISEER 5.0, along with copper tubing of on an average 3 mtr in length, as per specifications in Annexure XXXIX.

Supply and fixing of refrigerant copper tubing with insulation of required size, copper pipe dia 5/8" or 3/8" or 1/2" as per site requirement, complete with hardware fittings, as per specifications in Annexure XL.

Supply and fixing of refrigerant copper tubing with insulation of required size, copper pipe dia 1/4", complete with hardware fittings as per specifications in Annexure XL.

Supply and fixing of bracket type ready made M.S. stand for outdoor units of split Air conditioners, as per specifications in Annexure XLI

Supply, fixing, testing and commissioning of PVC insulated & sheathed copper cable flexible multistrand of size 2.5mm², 4 core for interconnection, as per specifications in Annexure XLII

Installation, testing & commissioning of split AC units of capacity 1.0TR/1.5 TR/2TR at the nominated site, as per specifications in Annexure XLIII. Running

Supply and fixing of plumber grade CPVC pipe line of nominal bore size 25 mm / 40 mm, as per site requirement, with all accessories, to drain out the condensate water - as per Annexure XLIV.

Fabrication of MS supporting work and angle for ducting. The design of MS supporting structure shall be as per the site condition & design covered with fully protection of equipment. Supporting structure for installation of ducting shall be of sufficient capacity to bear the load of G.I. 70 ducting. It shall be made from MS angle of size 30x30x6mm and supported by MS rod of size 12mm dia. suspended from ceiling/ fixed to the walls as per site conditions. All nuts, bolts and washers shall be zinc plated steel. Two coats of anti corrosive red oxide paint should be applied before final two coats of oil paint. MS angle/ supporting structure shall be fixed at an average distance of 1.5 mtr with suitable size GI fasteners /GI nut bolts etc., as per site requirement.

Supply and installation of GI perforated cable tray of size 150mm width x 50mm 71 depth x 1.6mm thick, powder coated with RED colour, including horizontal and vertical reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with GI suspenders etc. as required, as per specifications in Annexure XLV.