Construction of District Emergency Respose Facility Cum Training Centre (Type B) at Bhaisakhal Dist-Siwan (Tender id 136187)

TECHNICAL BID EVALUATION SHEET

BUILDING CONSTRUCTION DEPARTMENT

NAME OF WORK :- Construction of District Emergency Response Facility Cum Training Centre (Type B) at Bhisakhal Dist-Siwan

SL.NO. PARTICULARS LAID DOWN CRITERIA AS PER NIT CONDITION FULL MARKS EVALUATION CRITERIA BIDDER

A Name and address of agency

B Registration no. & department Agency must be registered with Govt./State Govt./Undertakings Mandatory Agency must be registered otherwise bid will be rejected

C Sale tax/VAT/GST clearance of Govt. of Bihar Must possess sales tax/VAT registration & up to date clearance certificate Mandatory ---do------

D Income Tax clearance Must quote PAN No. Mandatory ---do------

E Earnest Money In the form as specified in N.I.T and required amount. Mandatory ---do------

F Character Certificate Must Posses Character Certificate. Mandatory ---do------

G Electrical Registration In the form as specified in N.I.T and required amount. Mandatory ---do------

Note:-The bidders should necessarily be Responsive on above mentioned Seven counts A to G. The bidders found Non-Responsive in any one of the above mentioned Seven counts will not be considered for further markings & their Bid will be rejected.

MARKING DETAILS

SL.NO. PARTICULARS LAID DOWN CRITERIA AS PER NIT CONDITION EVALUATION CRITERIA

FULL MARKS Desired distribution

1 Average annual financial turn over of last three years (AATO may be indexed as per norms of bidding documents) Submit A.T.O of Chartered account ant for last three years 30 i) AATO equal to or above BOQ amount--30

ii) AATO equal to or above 70%of BOQ amount--20

iii) AATO equal to or above 50% but below 70% of BOQ amount--15

iv) AATO equal to or above 40% but below 50% of BOQ amount--10

v) AATO equal to or above 25% but below 40% of BOQ amount--5

vi) AATO below 25% of BOQ amount--Nil

Average A.T.O.after indexation

2 Experience of doing work of similar nature Must submit details of work done duly certified by the concerned E.E 20 i)If executed single work of similar nature equal to 50% of BOQ amount-20

ii)If executed single work of similar nature equal to 40% of BOQ Amount----15

iii)If executed single work of similar nature equal to 25% of BOQ Amount----10

iv)If executed single work of similar nature below 25% of BOQ Amount----nil

3 Details of Engineering setup for successful completion of work Must submit details Engg. Setup with individual affidavit of engineers. 10 i)Engg.setup with one-Deg.holder+one Diploma holder+suff.. staff--10

ii)Engg.setup with1-Deg.holder/one Diploma holder+suff. staff--5

4 Plant and equipment for successful completion of work i)Automaticbatching plant with all equipment. (ii)Conc.mixer with weighing facility. (iii)Steelshuttering & centering more than 2000sft. (iv)Vibrator & water tanker. 10 i)Atomatic Batching plant with all equipment---10

(ii)Concrete mixer with weighing facility---04

(iii)Steel shuttering and centering more than 2000sft--04

(iv)Vibrator------01

(v)water tanker----01

5 Details of financial availability through bank or self Bank certificate of extending credit facility up to 10% of BOQ amount 10 i)credit facility certificate given by Indian Bank upto 10%of BOQ amount-----05

(ii)Self declaration----05

(iii)No Self declaration----00

6 Necessary undertakings Agency should furnish the following undertakings. (i)Not abandoned project. (ii)No litigation. (iii)No relation. 5 (i)Not abandoned any project--03

(ii)No litigation--01

(iii)No relation---01

(iv)Not submitted any certificate---00

7 Bidding capacity BC=AxNx2-B A=Max.ATO after indexation. B=value of work in hands(Existing commitment) N=Time of completion Attach bidding statements with details 10 i)BC more than or equal to BOQ amount--10

iI)BC more than or equal to 70%but below BOQ amount--5

iI)BC more than or equal to 50%but below 70% of BOQ amount--3

iii)BC below 50% of BOQ amount----nil

8 Timely completion of project Attach certificate of the concern E.E 5 i)If three or more than three projects executed in stipulated time during last five year--05

i)If less than three projects executed in stipulated time during last five year--03

i)If no projects executed in stipulated time during last five year--00

Note:- (i) Minimum qualifying marks = 50/100 for project b/w 40lakhs to 200lakhs

Bill of Quantity

Name of work :- Construction of District Emergency Response Facility Cum Training Centre (Type B) at Bhisakhal Dist-Siwan

Estimate of Cost :- Rs. 7,82,32,899.00

Earnest Money :- Rs. 15,64,700.00

Cost of BOQ :- Rs. 10,000.00 Time of Complition :- 12 Months

NIT No: 03ETBCDSIWAN2026-2027

Sl. No. SR Item No. Item of Works Main Building watersupply Boundary wall Boundary wall Gate Furniture Fire Fighting Campus Boring SepTank Soakpit Pump RWH Electric Total Quantity Unit Rate Amount (Rs.) Main Building watersupply Boundary wall Boundary wall Gate Furniture Fire Fighting Campus Boring SepTank Soakpit Pump RWH Total Quantity diff

1 0L01 Providing Labour for Cleaning the Site & Uproofing Small Trees etc. 15.00 5.00 20.00 No 355.40 7108.00 5331 0 0 0 0 0 0 0 0 0 1777 0 7108 0.00

2 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . Including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 1517.74 370.52 10.45 34.83 5.78 9.28 1948.59 Cum 360.70 702858.00 547447.0145 0 133646.564 3769.030949 0 0 0 0 12563.181 2084.846 3347.296 0 702857.93244875 -0.07

4 2.25 (a) Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead 2910.94 2910.94 cum 411.70 1198436.00 0 0 0 0 0 0 1198435.792 0 0 0 0 0 1198435.79215631 -0.21

5 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 910.64 4.79 915.43 Cum 123.90 113422.00 112828.4199 0 0 0 0 0 0 0 0 0 593.225622876557 0 113421.645522877 -0.35

6 2.28 supplying and filling in plinth with local sand and under floors including, watering ramming consolidating and dressing complete. 797.44 32.24 0.87 121.85 2.18 4.16 4.14 962.88 Cum 287.30 276635.00 229104.4899 0 9262.552 250.6997756 0 0 35006.80079 0 626.314 0 1195.168 1189.035222375 275446.024482089 -1188.98

7 11. 72 providing designation 100A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per specification and direction of E/I 1315.41 214.96 6.51 13.01 21.42 27.59 1598.91 Sqm 283.30 452971.00 372656.9897 0 60898.168 1845.628675 0 0 0 0 3685.733 0 6068.286 7816.5373825 445154.805414992 -7816.19

8 11.73 Providing designation 100A one brick on edge soling joints filled with local sand including costofwatering, taxes, royaltyallcompleteasper building specification and direction of E/l, 308.87 308.87 sqm 444.80 137385.00 0 0 0 0 0 0 137385.0949 0 0 0 0 0 137385.094927742 0.09

9 4.1.2 1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 1:1.5:3(1 Cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal size) 2.18 2.18 Cum 4420.80 9637.00 0 0 0 0 0 0 0 0 9637.344 0 0 0 9637.344 0.34

10 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.1:2:4 (1 Cement; 2 coarse sand :4 graded stone aggregate 40 mm nominal size) 91.13 12.23 0.38 0.69 2.07 106.50 Cum 3998.10 425785.00 364334.2145 0 48883.61874 1535.2704 0 0 0 0 0 0 2758.689 8273.3757789375 417511.792680698 -8273.21

11 5.1.2 Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 26.92 7.61 4.07 38.60 Cum 4688.30 180956.00 0 0 0 0 0 0 126208.1326 0 0 0 35677.963 19069.95326875 161886.095615472 -19069.90

12 5.33.1 Providing and laying in position machine batched, machine mixed andnmachine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-25 grde reinforcd cement concrete All works above plinth level upto floor V level 432.79 96.02 2.62 531.43 Cum 5063.40 2690832.00 2191384.57 0 486187.668 13259.27241 0 0 0 0 0 0 0 0 2690831.51062101 -0.49

13 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concretestructural elements, excluding thecost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete 1.36 0.24 1.60 Cum 4756.90 7611.00 0 0 0 0 0 0 0 0 6469.384 1141.656 0 0 7611.04 0.04

14 5.3 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size).. 3.58 3.58 Cum 5335.90 19103.00 19102.522 0

15 5.33B.4 Add for providing richer mixes respectively at all floor levels.: Providing M-20 grade R.C.C instead of M-15 grade R.C.C. 3.58 3.58 Cum 383.80 1374.00 1374.004 0

16 5.2.2 Reinforced cement concrete work in wall (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upt floor five level excluding cost of centring, shuttering, finishin and reinforcement.1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 0.86 0.86 Cum 5670.00 4876.00 4876.2 0

17 6.1.12C Brick work with Fly Ash bricks in Fdn. And Plinth upto Plinth :Cement mortar 1.:4 (1 cement: 4 coarse sand ) 121.60 10.19 2.57 2.28 136.64 Cum 5116.30 699070.00 622120.8474 0 0 0 0 0 0 0 52135.097 13148.891 11665.164 0 699069.999355 -0.00

18 6.1.14C+6.3C Brick work with Fly Ash bricks in Super Str. with :Cement mortar 1:6 (1 cement: 6 coarse sand )Extra tor Brick work in superstructure above plinth level upto floor V cum 510.08 0.57 9.68 520.33 Cum 5765.20 2999786.00 2940700.113 0 0 3279.24576 0 0 0 0 0 0 55807.136 0 2999786.49463174 0.49

19 6.1.12C+6.3C Brick work with Fly Ash bricks in Super Structure with :Cement mortar 1:4 (1 cement: 4 coarse sand ) 28.65 85.37 114.02 Cum 5958.50 679405.00 170727.7833 0 508677.145 0 0 0 0 0 0 0 0 0 679404.92828125 -0.07

20 6.21A Extra for Providing & Painting 2 Nos. 6mm M.S bar of every third Layer etc. 229.22 229.22 Sqm 113.60 26040.00 26039.676 0 0 0 0 0 0 0 0 0 0 0 26039.676 -0.32

21 5.33.2.1 Providing and laying in position specified grade of reinforced cement concrete M25 Mix in Column excluding the cost of centring ,shuttering, finishing an reinforcement - 756.20 41.84 1.21 799.25 Cum 5863.20 4686178.00 4433765.983 0 245316.288 7095.732588 0 0 0 0 0 0 0 0 4686178.00320458 0.00

22 5.33.2.1 Providing and laying in position specified grade of reinforced cement concrete M25 Mix in Column excluding the cost of centring ,shuttering, finishing an reinforcement - 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

23 5.22.7A Reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

24 8.12 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20mm(avearage) thick base of cement mortar 1:4(1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge 12.80 12.80 Sqm 2147.70 27488.00 0 0 0 27487.98276 0 0 0 0 0 0 0 0 27487.98276 -0.02

25 10.17 Providing and fixing M.S.fan clamp type I or II of 16 mm dia.M.S. bar bent to shape with hooked ends in R.C.C slabs during laying including painting the exposed portion of loop,all as per standard designcomplete. 165.00 165.00 No 174.60 28809.00 28809 0 0 0 0 0 0 0 0 0 0 0 28809 0.00

26 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 2.00 2.00 No 165.40 331.00 330.8 0

29 13.11.4 Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 2651.77 99.21 2750.98 Sqm 141.50 389264.00 375225.542 0 0 0 0 0 0 0 0 0 14038.215 0 389263.756952806 -0.24

31 13.12.4 15 mm cement plaster on Outer wall or Rough side of mix.1:6(1 cement: 6 coarse sand ) 2651.77 2651.77 Sqm 162.80 431708.00 431708.256 0 0 0 0 0 0 0 0 0 0 0 431708.256041815 0.26

32 13.11.1+13.26 Providing Neat cement punning 12 mm cement plaster of mix: 1:3 (1 cement:3 coarse sand) 77.24 77.24 Sqm 204.80 15819.00 0 0 0 0 0 0 0 0 15818.752 0 0 0 15818.752 -0.25

33 13.80A.2 Providing and applying white cement based Putty of avg. 2mm thick 8325.61 8325.61 Sqm 105.40 877519.00 877519.276 0 0 0 0 0 0 0 0 0 0 0 877519.275978174 0.28

34 13.77.2 Distempering with oil bound distemper of approved brand and manufacture (two or more coats ) and of required shade on new work , over and including priming coat of whiting to give an even shade.Applying one coat of cement primer of approved brand and manufacture on wall surface: 5673.84 59.09 5732.93 Sqm 102.30 586479.00 580433.7516 0 0 0 0 0 0 0 0 0 6044.907 0 586478.658644114 -0.34

35 13.78.1+13.79.1 Applying one coat of cement primer of approved brand and manufacture on wall surface:Cement primer with water proofing cement paint of approved brand 843.16 843.16 Sqm 119.80 101011.00 0 0 101010.568 0 0 0 0 0 0 0 0 0 101010.568 -0.43

36 13.82.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 283.93 15.75 4.46 304.14 Sqm 83.50 25396.00 0 0 23708.155 1314.867152 0 0 0 0 0 0 372.490706319703 0 25395.5128583197 -0.49

37 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of neat cement 9.48 9.48 Sqm 203.60 1930.00 0

38 13.46.1 Finishing walls with acrylic smooth exterior paint of approved brand including Applying one coat of cement primer of approved brand and manufacture on wall surface:. 2651.77 2651.77 Sqm 137.00 363293.00 363292.5742 0 0 0 0 0 0 0 0 0 0 0 363292.574187523 -0.43

40 10.15.2 Providing Pressed Steel door Profile'C' Frame for door etc…. 141.16 141.16 M 421.20 59456.00 59455.97561 0 0 0 0 0 0 0 0 0 0 0 59455.9756097561 -0.02

41 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. 154.43 154.43 Cum 4649.00 717967.00 0 0 0 0 0 0 717966.8461 0 0 0 0 0 717966.846132049 -0.15

42 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including stainless steel butt hinges with necessary screws 64.41 64.41 Sqm 2845.60 183271.00 183271.4498 0 0 0 0 0 0 0 0 0 0 0 183271.449814126 0.45

43 21.3.1 Providing and fixing 4mm thick glass panes in D/W etc do….do… etc. 14.85 14.85 Sqm 809.30 12015.00 12015.3973 0 0 0 0 0 0 0 0 0 0 0 12015.3973048327 0.40

44 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 6.51 6.51 Sqm 6303.40 41007.00 41007.24907 0 0 0 0 0 0 0 0 0 0 0 41007.249070632 0.25

45 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding 4345.25 472.41 96.00 4913.66 Kg 144.50 710023.00 627888.625 0 0 68262.86352 0 0 0 0 0 0 13872 0 710023.48852 0.49

46 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 7187.03 7187.03 Kg 161.10 1157831.00 0 0 1157830.533 0 0 0 0 0 0 0 0 0 1157830.533 -0.47

47 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 354.00 354.00 Kg 546.80 193567.00 193567.2 0 0 0 0 0 0 0 0 0 0 0 193567.2 0.20

48 9.147D.2 Providing and fixing upvc sliding Three track three panels sliding window with fly proof SS wire mesh (Two nos.glazed & one no.wire mesh panels )made of (small series) frame 92x44mm & sash 32x60mm both having wall thickness of 1.9±0.2mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 171.10 171.10 Sqm 9471.00 1620456.00 1620456.413 0 0 0 0 0 0 0 0 0 0 0 1620456.41263941 0.41

49 9.12 Providing and fixing factory made uPVC white colour asement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick 3.81 3.81 sqm 2293.40 8728.00 8728.134758 0 0 0 0 0 0 0 0 0 0 0 8728.13475836431 0.13

50 13.93.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work 237.27 237.27 Sqm 84.50 20049.00 20049.1171 0 0 0 0 0 0 0 0 0 0 0 20049.1171003717 0.12

51 9.96 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 50.00 50.00 Nos 235.50 11775.00 11775 0 0 0 0 0 0 0 0 0 0 0 11775 0.00

52 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 85.00 85.00 Nos 111.40 9469.00 9469 0 0 0 0 0 0 0 0 0 0 0 9469 0.00

53 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 50.00 50.00 Nos 57.10 2855.00 2855 0 0 0 0 0 0 0 0 0 0 0 2855 0.00

54 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 30.00 30.00 Nos 60.80 1824.00 1824 0 0 0 0 0 0 0 0 0 0 0 1824 0.00

56 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

57 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

58 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly.plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 115.00 115.00 M 1087.90 125109.00 125108.5 0 0 0 0 0 0 0 0 0 0 0 125108.5 -0.50

59 5.9.1 Providing Centering and Shuttering including strutting, propping etc and removal of form for: foundations,footings,bases column 132.71 133.42 4.42 14.42 284.97 Sqm 211.60 60299.00 28080.75888 0 28231.672 935.272 0 0 0 0 0 0 3051.272 0 60298.97488 -0.03

61 5.9.5 Providing Centering and Shuttering including strutting, propping etc and removal of form for: G.beam Lintels, beams, plinth bams, griders, bressumers and contilevers. 2734.28 296.40 6.74 75.61 3113.03 Sqm 404.70 1259843.00 1106561.0925 0 119953.08 2728.97304 0 0 0 0 0 0 30599.367 0 1259842.51254 -0.49

62 5.9.6 Providing Centering and Shuttering including strutting, propping etc and removal of form for: Columns,Pillars, Piers, Abutments, Posts and Struts 945.30 664.56 13.24 13.58 1636.68 Sqm 494.40 809175.00 467356.32 0 328558.464 6546.25152 0 0 0 0 0 0 6713.952 0 809174.98752 -0.01

63 5.9.20 Suspended floors, roofs, landings, balconies and access platform with water proofply 12 mm thick. 231.90 231.90 Sqm 544.60 126290.00 126290.3409 0 0 0 0 0 0 0 0 0 0 0 126290.340925651 0.34

64 5.9.19 Providing Centering and Shuttering including strutting, propping etc and removal of form for: Chhajja 226.82 2.93 229.75 Sqm 550.90 126571.00 124957.3416 0 0 0 0 0 0 0 0 0 1614.137 0 126571.4786 0.48

65 5.9.16.1 Edges of slabs and breaks in floors and walis : Under 20 cms wide 33.69 33.69 m 130.20 4386.00 4386.31097560976 0

66 5.9.7 Providing Centering and Shuttering including strutting, propping etc and removal of form for: Stairs,(excluding landings) except spiral-staircaces. 266.45 266.45 Sqm 439.90 117210.00 117210.4752 0 0 0 0 0 0 0 0 0 0 0 117210.4752 0.48

67 13.17.2 12 mm cement plaster 1:4( 1 cement: 4coarse sand) finished with a floating coat of near cement Details of cost for 10 sqm 155.25 155.25 Sqm 192.20 29839.00 29839.05 0 0 0 0 0 0 0 0 0 0 0 29839.05 0.05

68 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 886.78 886.78 Sqm 1252.70 1110864.00 1110864.2952 0 0 0 0 0 0 0 0 0 0 0 1110864.2952 0.30

69 11.20.1 Chequerred precast cement concrete tiles 22 mm thick with marbie chips of size 6 mm in footpath & coutyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning tec. Complete on 20 mm thick bed of cement mortar 1:4(1 cement:4 coarse sand) 48.33 48.33 Sqm 1053.60 50917.00 50917.47212 0 0 0 0 0 0 0 0 0 0 0 50917.4721189591 0.47

71 11.37 Providing and Laying Ceramic glazed floor tiles…do..do etc 200.48 200.48 Sqm 686.80 137688.00 137687.8002 0 0 0 0 0 0 0 0 0 0 0 137687.800193309 -0.20

72 11.36 Providing and Laying Ceramic glazed wall tiles…do..do etc 612.96 612.96 Sqm 795.00 487300.00 487299.5353 0 0 0 0 0 0 0 0 0 0 0 487299.535315985 -0.46

75 10.2 Structural steel work riveted or bolted in built up sections, trusess and framed work, including cutting,hoisting,fixing in position and applying apriming coat of approved ateef primer all complete. 4000.00 4000.00 KG 95.40 381600.00 381600 0 0 0 0 0 0 0 0 0 0 0 381600 0.00

76 12.52.2 Grading for roof for water treatment with Cement concrete 1:2:4(1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 0.85 0.85 m3 3932.20 3342.00 3342.37 0

77 13.78.1 Applying one coat of cement primer of approved brand and manufacture on wall surface: Cement primer 56.88 56.88 m2 38.60 2196.00 2195.568 0

78 13.78.2 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade : New work (three or more coats) 56.88 56.88 m2 81.20 4619.00 4618.656 0

79 9.1.4 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Local wood 0.14 0.14 m2 54628.90 7593.00 7593.4171 0

80 9.53 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts,nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 18.00 18.00 m2 130.80 2354.00 2354.4 0

81 9.21.2 Providing and fixing ISI marked flush door shutters conforming to IS : 2202(Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 2.28 2.28 m2 1641.50 3743.00 3742.62 0

82 9.5.2.2 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge. Kiln seasoned and chemically treated hollock wood : 30 mm thick 5.58 5.58 m2 1798.50 10036.00 10035.63 0

83 9.62.2 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : 250x16 mm 1.00 1.00 m2 154.40 154.00 154.4 0

84 9.63.3 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete: 150x10 mm 8.00 8.00 m2 48.40 387.00 387.2 0

85 9.66.1 Providing and fixing ISI marked oxidised M.S. handles conforming to IS :4992 with necessary screws etc. complete: 125 mm 8.00 8.00 m2 32.40 259.00 259.2 0

86 13.82.2 + 13.81.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:New wood work (two or more coats) : With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and softwood) 19.06 19.06 m2 123.20 2349.00 2348.700372 0

87 2.6.1 Earthwork in excavation in foundation trenches. do - do all complet job 90.01 90.01 cum 314.90 28343.00 28342.934666875

88 6.1.14C Brick work CM (1:6) with fly ash bricks in foundations and plinth. do - do all complet job 24.57 24.57 cum 4923.00 120940.00 120939.64875

89 13.26 Providing net cement punning do - do all complet job 50.80 50.80 cum 40.50 2057.00 2057.4

90 11.76 Providing well burnt brick bats & jhama do - do all complet job 14.13 14.13 cum 3466.96 48988.00 48988.1448

91 19.19.4.1 Providing and fixing in position pre-cast R.C.C. manhole cover 560 mm dia do - do all complet job 4.00 4.00 cum 1393.20 5573.00 5572.8

92 24.3.2 Supplying, assembling, lowering and fixing uPVC pipe do - do all complet job 6.00 6.00 cum 660.10 3961.00 3960.6

93 24.5 Supplying , filling, spreading & leveling stone size 5 cm to 20 cm do - do all complet job 0.40 0.40 cum 1188.90 476.00 475.56

94 24.6 Supplying , filling, spreading & leveling gravels of size 5 cm to 10 cm do - do all complet job 0.40 0.40 cum 1195.60 478.00 478.24

95 24.7 Supplying , filling, spreading & leveling coarse sand of size 1.5 mm to 2 mm do - do all complet job 0.80 0.80 cum 1195.60 956.00 956.48

96 24.9 Providing and fixing factory made precast RCC perforated drain covers, do - do all complet job 2.00 2.00 cum 1213.20 2426.00 2426.4

97 24.13.2 Providing and fixing suitable size threaded mild steel cap do - do all complet job 2.00 2.00 cum 210.70 421.00 421.4

98 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing do - do all complet job 2.00 2.00 cum 1531.40 3063.00 3062.8

99 24.15.2 Providing and fixing Ball plug/ Bottom plug. do - do all complet job 2.00 2.00 cum 281.80 564.00 563.6

100 19.16 Providing orange colour safety foot rest of minimum 6mm thick do - do all complet job 16.00 16.00 cum 310.90 4974.00 4974.4

101 Carriage of Materials 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

102 Extra Cost of Supply of Materials 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

Water Supply and Sanitary Installation 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

103 17.1.1 Providing & fixing White Vitreous china Orissa pattern W.C. 12.00 12.00 each 4470.90 53651.00 0 53650.8 0 0 0 0 0 0 0 0 0 0 53650.8 -0.20

104 17.3.1 Providing & fixing W.C. pan with ISI marked white solid plastic seat and lid. 12.00 12.00 each 5504.30 66052.00 0 66051.6 0 0 0 0 0 0 0 0 0 0 66051.6 -0.40

105 17.23 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively. 12.00 12.00 each 1024.90 12299.00 0 12298.8 0 0 0 0 0 0 0 0 0 0 12298.8 -0.20

106 17.7.1 Supply & fixing White Vitreous China Wash basin. 12.00 12.00 each 2764.40 33173.00 0 33172.8 0 0 0 0 0 0 0 0 0 0 33172.8 -0.20

107 17.8 Providing and fixing white vitreous china pedestal for wash basin 12.00 12.00 each 1500.00 18000.00 0 18000 0 0 0 0 0 0 0 0 0 0 18000 0.00

108 17.10.1.3 Providing & fixing stainless Kitchen sink with drain board. 1.00 1.00 each 5231.50 5232.00 0 5231.5 0 0 0 0 0 0 0 0 0 0 5231.5 -0.50

109 17.28.1.1 Providing and fixing P.V.C. waste pipe for sink 32 mm dia. 42.00 42.00 each 101.70 4271.00 0 4271.4 0 0 0 0 0 0 0 0 0 0 4271.4 0.40

111 17.31 Providing and fixing 600x450 mm beveled edge mirror. 24.00 24.00 each 1068.50 25644.00 0 25644 0 0 0 0 0 0 0 0 0 0 25644 0.00

113 18.65 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall 48.00 48.00 each 96.80 4646.00 0 4646.4 0 0 0 0 0 0 0 0 0 0 4646.4 0.40

114 17.73.2 Providing and fixing PTMT towel 600 mm long towel rail. 22.00 22.00 each 424.00 9328.00 0 9328 0 0 0 0 0 0 0 0 0 0 9328 0.00

115 18.33.1 Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 With common burnt clay F.P.S.(non modular) bricks of class designation 100A 20.00 20.00 each 7210.60 144212.00 0 144212 0 0 0 0 0 0 0 0 0 0 144212 0.00

116 Providing & fixing CPVC Pipe…….. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

d) 18.9.5 Providing & fixing CPVC Pipe external. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

118 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, 20000.00 20000.00 litre 9.70 194000.00 0 194000 0 0 0 0 0 0 0 0 0 0 194000 0.00

120 18.50.1 Providing & fixing C.P. brass long nose bib cock. 40.00 40.00 each 715.10 28604.00 0 28604 0 0 0 0 0 0 0 0 0 0 28604 0.00

121 18.51.1 Providing and fixing C.P. brass long body bib cock. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

122 18.58 Providing and fixing PTMT grating of approved quality and colour. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

123 18.64 Providing and fixing PTMT swivelling shower. 20.00 20.00 each 106.10 2122.00 0 2122 0 0 0 0 0 0 0 0 0 0 2122 0.00

124 18.18.3 Providing and fixing gun metal ball valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. 15.00 15.00 each 399.20 5988.00 0 5988 0 0 0 0 0 0 0 0 0 0 5988 0.00

125 18.17.3 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. 10.00 10.00 each 707.30 7073.00 0 7073 0 0 0 0 0 0 0 0 0 0 7073 0.00

126 18.17.1 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore. 10.00 10.00 each 532.30 5323.00 0 5323 0 0 0 0 0 0 0 0 0 0 5323 0.00

127 18.19.1 Providing and fixing gun metal non-Return valve 32mm dia etc. all complete jobs.. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

128 18.53 Providing & fixing C.P. brass Angle Valve etc. all complete Jobs. 15.00 15.00 each 500.40 7506.00 0 7506 0 0 0 0 0 0 0 0 0 0 7506 0.00

129 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed 300 mm dia 90.00 26.00 116.00 metre 486.80 56469.00 0 0 0 0 0 0 0 43812 0 0 0 12656.8 43812 -12657.00

130 24.3.1 Supplying, assembling, lowering and fixing in vertical position in bore well, 100 mm nominal size dia. 80.00 80.00 metre 546.10 43688.00 0 0 0 0 0 0 0 43688 0 0 0 0 43688 0.00

131 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well 100 mm nominal size dia. 10.00 20.00 30.00 metre 573.10 17193.00 0 0 0 0 0 0 0 5731 0 0 0 11462 5731 -11462.00

132 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 1.40 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

133 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content 8.00 12.00 20.00 hour 916.80 18336.00 0 0 0 0 0 0 0 7334.4 0 0 0 11001.6 7334.4 -11001.60

134 24.13.1 Providing and fixing suitable size 100 mm dia.Cap 1.00 1.00 each 189.70 190.00 0 0 0 0 0 0 0 189.7 0 0 0 0 189.7 -0.30

135 24.14.1 Providing and fixing M.S. clamp of required dia 100 mm clamp. 1.00 1.00 each 1448.10 1448.00 0 0 0 0 0 0 0 1448.1 0 0 0 0 1448.1 0.10

136 24.15.1 Providing and fixing Bail plug/ Bottom plug of required 100 mm dia. 1.00 1.00 each 228.30 228.00 0 0 0 0 0 0 0 228.3 0 0 0 0 228.3 0.30

137 N.S S/F/F 2 H.P Crompton Submersible Pump of ISI marka electric wire switch, starter etc. 1.00 1.00 each 30090.00 30090.00 30090.00 0 0 0 0 0 0 0 30090 0 0 0 0 30090 0.00

138 24.11.1 Supplying, assembling, lowering and fixing in vertical position in bore well, 150 mm nominal size dia. 2.50 2.50 metre 1206.90 3017.00 0 0 0 0 0 0 0 3017.25 0 0 0 0 3017.25 0.25

139 7 Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589 / IS 1239 including Welding, fittings like elbows, tees , flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 0.00 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

140 14 Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

141 11 Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

ii INTERNAL HYYDRANT SYSTEM 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

142 9.2 Supply, Installation, Testing & Commissioning of Single headed, Stainless Steel ISI marked pattern hydrant landing valve with 80 mm dia flange inlet and 63 mm dia instantaneous type female out let complete with gunmetal cap and G.I chain twist release type plug and all accessories as per IS:5290-1983 8 8.00 Each 5,722.00 45776.00 0 0 0 0 0 45776 0 0 0 0 0 0 45776 0.00

143 17.1 Providing & fixing swinging type First Aid hose reel in red colour with 40 mts long and 20 mm dia heavy duty rubber water hose, 20 mm dia globe valve stop cock, terminating with G.M. coupling & nozzle of 5mm outlet with shut off valve confirming to IS 8090 - 1976 complete with drum and brackets for fixing on wall, bolts & nuts conforming to IS:884-1969 complete as required. 30m 8 8.00 Each 7,920.00 63360.00 0 0 0 0 0 63360 0 0 0 0 0 0 63360 0.00

144 16.2 Providing and fixing 63 mm dia (15 m long) EPDM lined fabric hose including SS -304 male and female instantajeous type coupling approved by fire authority machine wound with GI wire complete in all respects. Hose shall conform to IS: 636 Type II and coupling to IS : 93- 1975 with ISI certification MAKE : OMEX/ NEWTECH/ EQV. 8 8.00 Each 4,445.00 35560.00 0 0 0 0 0 35560 0 0 0 0 0 0 35560 0.00

145 NSI Providing and fixing fire hose cabinet fabricated from16 guage ms sheet with double glazed front doorand pad lockingarrangement painted fire red with stove enameled paint and Fire HOSE written on front including necessary supports (to house one length of canavas hose with couplings, branch pipe and nozzle) 8 8.00 Each 5,800.00 46400.00 0 0 0 0 0 46400 0 0 0 0 0 0 46400 0.00

146 18.2 Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Stainless Steel 8 8.00 Each 1,631.00 13048.00 0 0 0 0 0 13048 0 0 0 0 0 0 13048 0.00

147 NS2 Providing and fixing 25mm Dia brass ball valve full bore type with lever and screwedd female ends. (20 kg/sq.cm.) 8 8.00 Each 1,722.00 13776.00 0 0 0 0 0 13776 0 0 0 0 0 0 13776 0.00

148 NS 3 Providing and fixing 25 mm dia gun metal single acting air release valve with screwed intel tested for 20 kg/ cm2 Make : Omes/ Newtech/ Eqv. 2 2.00 Each 1,722.00 3444.00 0 0 0 0 0 3444 0 0 0 0 0 0 3444 0.00

149 NS 4 Providing and Fixing dia type pressure gauge with isolation cock and chrome coated copper pipe on main header Dial Dia. 150 mm Calibratino 0-15 kg./ cm2 Make : Omes/ Newtech/ Safeguard/Hd. 1 1.00 Each 1,722.00 1722.00 0 0 0 0 0 1722 0 0 0 0 0 0 1722 0.00

150 NS 5 Providing and fixing heavy duty aluminium armored cables 1.1 KVA grade including necrssary support clamps at ceiling 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

III PUMPS & ACCESSORIES. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

Type : Split casing 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

152 I Electrical Motor Driven Fire Pumping set suitable for automatic operation consisting of the following as per specification. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

1.9 Horizontally mounted, centrifugal type single stage fire pump having cast iron body, bronze impeller, stainless steel shaft & capable of delivering 1620 LPM against a total head of 56 m Complete 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

153 Suitable R.C.C Pump-Foundations as per manufacturer's design and 4 nos. Dunlop (cusgy foot) heavy duty Antivibration mounting pads. 1 1.00 Se 2,81,411.00 281411.00 0 0 0 0 0 281411 0 0 0 0 0 0 281411 0.00

154 SUPPLY, INSTALLATION TESTING & COMMISSIONING OF 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

155 Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft , mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

156 5 Supply, Installation Testing & Commissioning of Cubical type floor mounted fire pump control panel fabricated from 14 g M.S CRS sheet duly powder …. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter connection with suitable size copper conductor cable / solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

5.1 INCOMING: 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories an internal wiring required for automatic operation, selector switch for local/remote, auto / manual / OFF operation. Jockey Pump 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/ manual/ OFF operation. DIESEL ENGINE CONTROL Control for diesel engine comprising Automatic / Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing an commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification. 1 1.00 Set 248187 248187.00 0 0 0 0 0 248187 0 0 0 0 0 0 248187 0.00

157 Providing and fixing dual type pressure switch suitable for 1-20 kg/cm2 including electrical connections setting of Cut-In and Cut-Off pressure complete in all Respects. 4 4.00 No. 1,442.00 5768.00 0 0 0 0 0 5768 0 0 0 0 0 0 5768 0.00

158 20 Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. 1 1.00 Each 17,707.00 17707.00 0 0 0 0 0 17707 0 0 0 0 0 0 17707 0.00

VI FIRE EXTINGUISHERS 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

159 NS 6 Providing and fixing CO2 extinguisher condisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cm long high pressure discharge hose, discharge nozzle ISI marked as per IS 13869 including fixing with dash faseners etc. complete Make: Omex/Newtech/Eqv. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

160 NS 7 Providing and fixing stored pressure Multipurpose fire extinguisher condisting of welded M.S cylindrical body, squeeze lever discarge value, 30 cms long high presure discharge hose ISI marked as per IS: 15683 including fixing with dash fasteners etc. complete Make: Omex/Newtech/Eqv. 0 0 0 0 0 0 0 0 0 0 0 0 0 0.00

161 NS S/F/F Standard Make PVC water tank comp job as per direction E/I with relevant PHE works. 10000 10000.00 ltr 12.50 125000.00 0 0 0 0 0 125000 0 0 0 0 0 0 125000 0.00

162 21.1 Providing fixing and testing of UL listed sprinkler head, Upright/ Pendant type standard response sprinkler with quartzoid bulb overrating temperature 68 digree C of 15 mm orifice and K factor 80 made out of torged brass and chrome finished. 93 93.00 Each 408.00 37944.00 0 0 0 0 0 37944 0 0 0 0 0 0 37944 0.00

164 N.S Supplying, fitting and fixing Executive Table of Size 2100x1200mm in size of approved brand and manufacturing etc. all 8.00 8.00 Each 28000.00 224000.00 224000.00 0 0 0 0 224000 0 0 0 0 0 0 0 224000 0.00

165 N.S Supplying, fitting and fixing Executive Table of Size 1800x1200mm in size of approved brand and manufacturing etc. all 12.00 12.00 Each 24000.00 288000.00 288000.00 0 0 0 0 288000 0 0 0 0 0 0 0 288000 0.00

166 N.S Supplying, fitting and fixing Wooden office table of Size 1200x1200 mm in size of approved brand and manufacturing etc. all 15.00 15.00 Each 15000.00 225000.00 225000.00 0 0 0 0 225000 0 0 0 0 0 0 0 225000 0.00

167 N.S Supplying, fitting and fixing Executive revolving type chair of approved brand and manufacturing etc. all 8.00 8.00 Each 9500.00 76000.00 76000.00 0 0 0 0 76000 0 0 0 0 0 0 0 76000 0.00

168 N.S Supplying, fitting and fixing for office armed type chair of approved brand and manufacturing etc. all 27.00 27.00 Each 6000.00 162000.00 162000.00 0 0 0 0 162000 0 0 0 0 0 0 0 162000 0.00

169 N.S Supplying, fitting and fixing for office armed typePVC chair of approved brand and manufacturing etc. all Complete Job (For Chamber, Office, Common Room) 100.00 100.00 Each 3500.00 350000.00 350000.00 0 0 0 0 350000 0 0 0 0 0 0 0 350000 0.00

170 N.S Supplying, fitting and fixing for Public Three Seated S.S Chair of Approved brand and Manufacture etc. all complete Jobs. 16.00 16.00 Each 15000.00 240000.00 240000.00 0 0 0 0 240000 0 0 0 0 0 0 0 240000 0.00

171 N.S Supplying, fitting and fixing for Public Two Seated S.S Chair of Approved brand and Manufacture etc. all complete Jobs. 20.00 20.00 Each 10000.00 200000.00 200000.00 0 0 0 0 200000 0 0 0 0 0 0 0 200000 0.00

172 N.S Supplying, fitting and fixing Single bedded Sal wood bed of 900x1950 mm in size . of Approved brand and Manufacture etc. all complete Jobs. 50.00 50.00 Each 8000.00 400000.00 400000.00 0 0 0 0 400000 0 0 0 0 0 0 0 400000 0.00

173 N.S Supplying, fitting and fixing Single bedded Matteress of 900x1950 mm in size including bed sheet, pillow, etc. of Approved brand and Manufacture etc. all complete Jobs. 50.00 50.00 Each 4000.00 200000.00 200000.00 0 0 0 0 200000 0 0 0 0 0 0 0 200000 0.00

174 N.S Supplying, fitting and fixing double seated Sofa of Standard size of Approved brand and Manufacture etc. all complete Jobs. 15.00 15.00 Each 20000.00 300000.00 300000.00 0 0 0 0 300000 0 0 0 0 0 0 0 300000 0.00

175 N.S Supplying, fitting and fixing Single seated Sofa of Standard size of Approved brand and Manufacture etc. all complete Jobs. 10.00 10.00 Each 12000.00 120000.00 120000.00 0 0 0 0 120000 0 0 0 0 0 0 0 120000 0.00

176 N.S Supplying, fitting and fixing Rectangular size of Standard size of Sal wood Central Table with Glass top for Bed Room of Approved brand and Manufacture etc. all complete Jobs. 15.00 15.00 Each 11000.00 165000.00 165000.00 0 0 0 0 165000 0 0 0 0 0 0 0 165000 0.00

177 N.S Supplying, fitting and fixing Rectangular size of Standard size of Sal wood Dinning Table with Glass top for Bed Room of Approved brand and Manufacture etc. all complete Jobs. 50.00 50.00 Each 12000.00 600000.00 600000.00 0 0 0 0 600000 0 0 0 0 0 0 0 600000 0.00

178 N.S Supplying, fitting and fixing Chair for dinning hall of Approved brand and Manufacture etc. all complete Jobs. 50.00 50.00 Each 5000.00 250000.00 250000.00 0 0 0 0 250000 0 0 0 0 0 0 0 250000 0.00

179 N.S Supplying, fitting and fixing Single Sheated wheel Chairs for waitin Lounge of Approved brand and Manufacture etc. all complete Jobs. 25.00 25.00 Each 8000.00 200000.00 200000.00 0 0 0 0 200000 0 0 0 0 0 0 0 200000 0.00

180 N.S Supplying, fitting and fixing Steel Almirah of Size 1050x600x2100 for Chamber and Office of Approved brand and Manufacture etc. all complete Jobs. 50.00 50.00 Each 20000.00 1000000.00 1000000.00 0 0 0 0 1000000 0 0 0 0 0 0 0 1000000 0.00

181 N.S Supplying, fitting and fixing Approved quality Freezer of Standard Brand of 8.50 Cft for Dinning Hall brand and Manufacture etc. all complete Jobs. 4.00 4.00 Each 18000.00 72000.00 72000.00 0 0 0 0 72000 0 0 0 0 0 0 0 72000 0.00

182 N.S Supplying, fitting and fixing double burner with gas cylinder for Kitchen of Approved quality and Manufacture etc. all complete Jobs. 2.00 2.00 Each 12000.00 24000.00 24000.00 0 0 0 0 24000 0 0 0 0 0 0 0 24000 0.00

183 N.S Supplying, fitting and fixing of approved quality of CCTV of approved brand and Manufacture etc. all complete Jobs. 30.00 30.00 Each 5000.00 150000.00 150000.00 0 0 0 0 150000 0 0 0 0 0 0 0 150000 0.00

184 N.S Supplying, fitting and fixing of approved quality Water Purifier with R.O with Cooler of approved brand and Manufacture etc. all complete Jobs. 4.00 4.00 Each 20000.00 80000.00 80000.00 0 0 0 0 80000 0 0 0 0 0 0 0 80000 0.00

185 N.S Supplying, fitting and fixing of approved quality of Split Type A.C of Capacity 1.5Tone including all cost for Labour, materials, taxes of approved brand and Manufacture etc. all complete Jobs. 10.00 10.00 Each 45000.00 450000.00 450000.00 0 0 0 0 450000 0 0 0 0 0 0 0 450000 0.00

186 N.S Supplying, fitting and fixing of approved quality of Dispenser for hot & cold of approved brand and Manufacture etc. all complete Jobs. 4.00 4.00 Each 40000.00 160000.00 160000.00 0 0 0 0 160000 0 0 0 0 0 0 0 160000 0.00

187 N.S Supplying, fitting and fixing wooden Wardrobe of Size 600x1200 mm of approved brand and Manufacture etc. all complete Jobs. 50.00 50.00 Each 8000.00 400000.00 400000.00 0 0 0 0 400000 0 0 0 0 0 0 0 400000 0.00

Apply Correction Factor @ 0.982(B) ₹ 58,341,208.00

1 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit with modular switch, modular plate, suitable size G.I. box etc as required. ₹ 840,207.00

Batten Holder Point 34

Tube Light Point 167

Downlighter 367

Ceiling Fan Point 187

Exhaust Fan Point 16

Call Bell Point 2

Street Light on Building(45 waat & 90 watt) 11

2 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 855 855 Metre 309.00 ₹ 264,195.00

3 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire for ckt & street light 1960 1960 Metre 201.00 ₹ 393,960.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire for computer point 1126 1126 Meter 246.00 ₹ 276,996.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire for AC Points 465 465 Meter 309.00 ₹ 143,685.00

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire for 6 way SPN DB 20 20 Meter 422.00 ₹ 8,440.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire for 4 way LIGHT TPN DB 340 340 Metre 660.00 ₹ 224,400.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire for 4 way POWER TPN DB 160 160 Meter 925.00 ₹ 148,000.00

1.7.13 4 X 16 sq. mm + 1 X 6 sq. mm earth wire for Light & Power VTPN DB 120 120 Meter 1312.00 ₹ 157,440.00

4 1.25 Supplying and fixing stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 187 187 Each 358.00 ₹ 66,946.00

5 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 87 87 Each 414.00 ₹ 36,018.00

6 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 57 57 Each 531.00 ₹ 30,267.00

7 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 380 380 Each 64.00 ₹ 24,320.00

8 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 34 34 Each 80.00 ₹ 2,720.00

9 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. 2 2 Each 351.00 ₹ 702.00

10 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 31 31 Each 683.00 ₹ 21,173.00

11 1.55 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 98 98 Each 632.00 ₹ 61,936.00

12 1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 3 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required. 13 13 Each 1064.00 ₹ 13,832.00

13 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.

14 2.33 Supplying and fixing following ways, surface/recess mounting, Vertical three phase distribution board ( VTPN DB's ) of CRCA sheet steel, dust protected, duly powder painted suitable for upto 160 amp, four pole MCCB as Incomer and SP/TP MCB's as outgoing inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's etc as required. (but without MCCB & MCBs)

2.33.2 4 way, Double door, I/C 160A, MCCB 8 8 Each 12107.00 ₹ 96,856.00

15 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

16 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 36 36 Sq.ft. 1809.00 ₹ 65,124.00

17 AR S/F Cu Patty for BBC weight 40 40 Kg 871.00 ₹ 34,840.00

18 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

19 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 1 Each 6536.00 ₹ 6,536.00

20 2.8 Supplying and fixing following way single pole & neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus-bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). (For strret light on terrace floor)

2.8.5 6 way, Double door 1 1 Each 2197.00 ₹ 2,197.00

21 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.9.1 4 way (4 + 12), Double door, horizontal type 24 24 Each 4184.00 ₹ 100,416.00

22 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

23 2.13 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.13.3 40 A to 63 A, double pole on panel for future 4 4 Each 1198.00 ₹ 4,792.00

24 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 2 2 Set 13721.00 ₹ 27,442.00

25 3.19 Providing and fixing 4.0 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. 40 40 Metre 122.00 ₹ 4,880.00

26 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 167 167 Each 521.00 ₹ 87,007.00

27 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required.

28 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

29 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 11 11 Each 1038.00 ₹ 11,418.00

30 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

31 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

7.7.15 240 sq. mm, 3.5 core for generator connection 100 100 Metre 2228.00 ₹ 222,800.00

7.7.17 400 sq. mm, 3.5 core for Main connection 100 100 Metre 3497.00 ₹ 349,700.00

32 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

7.3.4 Above 185 sq. mm and upto 400 sq. mm 180 180 Metre 174.00 ₹ 31,320.00

33 DSR 9.2 Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.

9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) 187 187 Each 2695.00 ₹ 503,965.00

34 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

PART: - 'B' CAMPUS LIGHT

35 9.16 Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required.

36 8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation)

37 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

38 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

39 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

40 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

41 5.12 Supplying and fixing post top / garden light (width 200 mm) made up of high grade unbreakable polycarbonate material suitable for upto 7 watt LED lamp including connections and earthing the body etc as required. ( But without lamp) 2 2 Each 1114.00 ₹ 2,228.00

42 9.13 Providing , laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required.

43 2.27 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 amps 240 volts, "C" curve DP MCB complete with connections, testing and commissioning etc. as required. 2 2 Each 1162.00 ₹ 2,324.00

PART: - 'C' LIGHTNING ARRESTOR

44 4.2 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. 4 4 Each 416.00 ₹ 1,664.00

45 4.4 Jointing copper/ G.I. tape ( with another copper/ G I tape, base of the finial or any other metallic object ) by riverting/ nut bolting sweating and soldering etc. as required. 30 30 Each 81.00 ₹ 2,430.00

46 4.7 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 130 130 Metre 102.00 ₹ 13,260.00

47 4.8 Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 80 80 Metre 145.00 ₹ 11,600.00

48 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 2 2 Set 16675.00 ₹ 33,350.00

PART: - 'D' CCTV SYSTEM

49 DSR 40.3 Supplying Installation Testing and Commissioning of 4MP IP IR Dome Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps , Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection 8) Cyber Security: AES 256-bit Encryption, Configuration encryption, trusted execution, Digest, security logs, account lockout, video encryption, IP/MAC filtering, HTTPS, trusted upgrade 9) Onboard Storage: Camera should support built-in Micro SD/ SDHC/ SDXC Card slot upto 512 GB. It should be supplied with minimum 128GB memory Card. 10) Recording Management: Format SD, overwrite, storage management, video to NAS device, 11) Alarm Trigger : Motion/tampering detection; network disconnection detection; IP conflict detection; memory card state detection; memory space detection 12)Network Protocol: SFTP, IPv6, IPv4, DNS,RTCP, NTP, RTP, HTTP, HTTPS, SNMP TCP/IP, PPPoE, NFS, UDP, ICMP, SSL, DHCP, SMTP, RTSPS, unicast, 13) System Capability: ONVIF, Camera shall support open source VMS 14) Ethernet: 1 RJ 45 10/100 Ethernet port 15) Audio : It should support 1 x Built-In Mic and 1/1 Alarm In/ Out for External Mic. and Speakers as per site requirement. 16) Power Input: The camera should support simultaneous dual power input—12 VDC (via power adapter) and PoE (802.3af)—to ensure continuous operation in the event of a failure in one power source. 17) Power Requirement: 12VDC/24 VDC/PoE (802.3af)/ePoE 18) Housing/ Enclosure:- IP67 weather proof, IK10, Metallic body 19) Operating Condition:- Ambient Temperature:- ( )05°C to 50°C, humidity 95% (max) (non-condensing)

20) IR life: 40000 hours or higher 21) Video Bit rate: 32 KBPS - 8 MBPS or better 22) Standards: BIS with ER, STQC Certified, CE, FCC & ROHS

40.3.2 4MP @ 25/30fps@1440P (2560x1440) Dome Camera with 2.7 to 4 mm ~12 to 13.5mm or better Varifocal Motorized lens. 2 2 23754.00 ₹ 47,508.00

50 DSR 40.4 Supplying Installation Testing and Commissioning of 4MP IP IR Outdoor Bullet Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723 4) Wide Dynamic Range:- WDR (120dB or more) 5) Digital Noise Reduction:- DNR (3D) On/Off 6) Video Streaming & Frame Rates :- Triple streaming , configurable Main stream: 4MP (2560×1440)25/30fps Sub streams minimum: 720P@25/30 fps 7) Image Setting: Rotate Mode, saturation, brightness, contrast, sharpness adjustable through client software or web browser, Edge Analytics: Tripwire, Intrusion, Motion Detection

40.4.1 4MP @ 25/30fps@1440P (2560 x 1440) Outdoor Bullet Camera with 2.8/ 3.6/6/8/12 mm fixed lens (as per site requirement) 6 6 10063.00 ₹ 60,378.00

51 DSR Supplying Installation Testing and Commissioning of following Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP camera or more and must be ONVIF with minimum support of 384 Mbps incoming Bandwidth. 2) NVR should support video compressions : H.265 or better, H.264, MJPEG. 3) Must support 1 channel RCA Input, 2 channel RCA Output for Two-way Talk with G.711U/A, G.711u, PCM, G726 audio compressions. 4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 8 SATA Slots with 20TB capacity/ Slot and RAID support of RAID 0/1/5/6/10. 6) Connectivity Interface : 2 Nos. x 10/100/1000 Mbps Ethernet Ports, 1x RS485, 1x RS232, 1x eSATA Port 7) Backup Interface : Its should have 4 Nosx USB port (2x USB3.0, 2xUSB2.0) 8) Video Output Ports: 2x HDMI and 2 VGA 9) Alarm Ports: It should have 16/8 Ch In/ Out ports to connect various type of external sensors and output devices like hooter/ Siren etc. 10) Email & SMS Altert options: Option for SMS/ Email Alerts to minimum 5 designated mobile number for power failure, HDD failure, vandalism, tempring, network disconnection and panic 11) Web & Mobile Application: Web, Mobile app ( For iPhone, iPad, Android Phone) for alerts and viewing. 12) Protocols: HTTP, HTTPS, TCP/IP, IPv4/IPv6, UDP, DHCP, DNS, SMTP, UPnP, IP Filter, PPPoE, FTP, DDNS, Alarm Server, IP Search, Multicast, Auto Registration, ONVIF (Profile T, Profile S, Profile G), CGI, SDK and OEM Cloud for remote monitoring without any public IP need. 13) Standards: CE, FCC, RoHS, BIS Certified 14) Power Supply : Should support AC100-240V, 50/60Hz Power supply

15) Operating Condition : -5°C to 50°C, humidity 90% (max) (non-condensing) 16) The VMS application shall support all the features & functionalities of the offered cameras. 17) VMS should consist Licenses for all channels to record Cameras with General, motion detection, intelligent, alarm and POS recording modes. VMS should be provided with Camera Licenses , with no dependency of VMS licenses by binding with the MAC address of the cameras to achieve the functionality. 18) The NVR OEM shall be responsible for providing a mobile application compatible with both Android and iOS devices, enabling remote monitoring and playback of cameras/NVR footage. 19) The OEM must provide its own DDNS server hosted in India, eliminating the need for a public IP address for remote monitoring over the Internet. 20) Must support Continuous, Alarm, Motion, Instant, Panic Recording Mode 21) It should support Resolution: 32MP; 24MP; 16MP; 12MP; 8MP; 5MP; 4MP; 1080p; 720p; D1; CIF; QCIF 22) When alarm recording is enabled and an event occurs, you can click the alarm icon on monitoring page to view the alert details. The snapshot function is supported on monitoring and playback page 23) The Network Video Recorder (NVR) shall be configured to send email whenever a system message is created or an alarm event occurs. The email server shall be a valid SMTP server. Each recipient email address shall be configured to receive any combination of critical, warning, or informational messages or alarm notifications. When an alarm occurs, the email message includes the NVR name, time of alarm and a list of camera that is configured to record upon alarm 24) It should have Web and GUI interface. 25) Built-In Artificial Intelligence: NVR should have built-in AI :-- 2 Channel face detection and recognition, - Minimum 4 Channel perimeter protection, - Minimum 8 Channel Smart Motion Detection

26) Face Recognition Database Capacity: It should support total Blacklist and Whitelist capacity of Minimum 20,000 Faces or more with Face Detection speed of 12 face images/sec and facility to add Name, gender, birthday, address, credential type, credential No., countries & regions and state to each face image. 27) Face & Human Attributes Search: Search Pictures/ Video by Gender, age group, glasses, expressions, face mask, beard, Top color, top type, hat, bag, age, gender and umbrella. 28) ANPR Capability: It should support ANPR Camera with License plate, plate color, vehicle body, vehicle model, vehicle logo, calling, seatbelt, vehicle registration location etc vehicle attributes. 29) Alarm Notifications based on: Motion detection, video tampering, video loss, scene changing, PIR alarm, Camera external alarm, Face detection, face recognition, perimeter protection (intrusion and tripwire), ANPR, people counting, stereo analysis, crowd distribution, heat map, Disk Full, Storage Error, IP Conflict and abnormal behavior of fan, cybersecurity exception 30) Alarm Notification should be linked with Recording, snapshots, Camera external alarm output, buzzer, logs, presets and email. 31) General AI Based Search: Search Pictures by channel, time, event type, target classification (Fall Detection, People Approach Detection, People No. Exception Detection, People Staying Detection, Violence Detection. 32) Smart playback function: Should support smart search for the selected area in the video and smart playback to improve the playback efficiency 33) VCA (Video Content Analytic): Should support multiple video contented analytics based on camera analytics 34) Analytics by NVR: Perimeter protection and face recognation

40.11.2 64 Channel Network Video Recorder (NVR) having display split :- Main screen: 1/4/8/9/16/25/36/64, 2nd screen: 1/4/8/9/16 1 1 Each 82600.00 ₹ 82,600.00

52 DSR Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 MB Cache, 7200 RPM Disk Speed, 3.5 inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL Certifications.

53 BSR Supplying and drawing of UTP 4 pair CAT 6 LAN cable in the existing surface/ recessed PVC conduit as required.

54 BSR Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

55 DSR Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6 mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color- RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required.

56 DSR Online UPS - Input supply: Single Phase, Output Supply: Single Phase. Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) ON LINE Uninterrupted Power Supply (UPS) system suitable for Single Phase input, Single Phase output AC Supply. The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. The UPS systems shall be Microprocessor based Digital Control, using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter with PWM (Pulse Width Modulation) Technology. The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >95% at 100% non-linear loads. Current total harmonic distortion(ITHD)/ total demand distortion (TDD) on the input grid shall be < 5% at 100 %load. (The required LC filters shall be included in UPS cost), extreme power factor kit to be include to limit the input pf to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ) however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC single phase 160-270V 50 Hz and delivering output AC supply true sine wave single phase 220/230/240 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins and 150% for 1 minute. Operating temperature 0 to 40 0C, Relative humidity 0-95% non condensing, noise level less than 60db at 1 meter distance, Protection for Under voltage, over voltage, abnormal output voltage, battery over charging, output over current, short

circuit, battery deep discharge , 10 KV surge. Display for watt/VA,Amp and Voltage power parameters etc. UPS shall comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI) type UPS (as per standard IEC 62040-1, 2 & 3) . The UPS should be with IGBT Based Inverter Technology, Communication RS232/ RS485/ SNMP port open protocol for BMS integration as per approved by Engineering in charge. Required battery racks, DC breaker of suitable rating and interconnecting copper conductor cable of suitable size and connectors and all required accessories are inclusive in the cost. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc

57 DSR Supplying, Installation, Testing and Commissioning of following size LED display (LED monitor) industrial grade with 3840x2160 resolution or better, USB playback, bluetooth and miracast connectivity, 4X HDMI 2.0, DP 1.2, HDR 10/10+, brightness: 500-nits or better, Video wall mode should be available, contrast ratio: 1200:1, OPS slot, viewing angle (H/V): 170°/ 170°, response time less than 12ms, Display control shall be on monitor screen and programmable with remote (remote shall be supplied with system), Key Board, Optical Mouse, etc. as required.

PART -'E' TRANSFORMER

58 DSR Supplying, installation, testing and commissioning of following capacity (continuous loading) BEE 3 Star rated (Corresponding Level as per BIS amended upto date of receipt of tender) , 11/0.433 KV step down, 3 Phase, 50 Hz, Dyn 11 vector group, KNAN [K(K-Class insulating liquid) Natural Air Natural] copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better),Dielectric material shall be type -A, suitable for out door/indoor applications with Offload Tap Changer/ On Load Tap Changer (OLTC) ( below 500 KVA offload and above 500 KVA On Load Tap Changer) on HV side having AVR relay and Remote Tap Changer Control (RTCC) for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote and manual operation of OLTC HV side in range of +5% to -15% in steps of 2.5%, having cable end boxes on HV side suitable for 3x300 sq.mm XLPE cable of 11 KV grade, including bus trunking arrangement on LV side including supplying and laying of copper conductor multicore control cable from transformer to HT breaker/panel for safety tripping, complete with all accessories and safety provisions as per relevant IS 1180 (Part-3) including first filling of filtered dehydrated Synthetic organic Ester oil, i/c supplying and grouting of suitable M.S. Channel with all accessories and transformer shall be confirming to IS : 2026 (Part 1 to Part 5), IS : 1180 (Part-3) and as per CPWD specifications complete in all respects etc as required at site. The maximum flux density in any part of the core and yoke at rated voltage and frequency shall be such that the flux density with +12.5 percent combined voltage and frequency variation from rated voltage and frequency does not exceed 1.9 Tesla. The permissible temperature-rise shall not exceed 40 0C for oil and 45 0C for winding up to 200 KVA and 45 0C for oil and 50 0C for winding for above 200 KVA. Inside of tank shall be painted with varnish or liquid resistant paint. For external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. IS: 1180 (Part 3) shall be referred for paint thickness for normal to medium corrosive

atmosphere. For highly polluted atmosphere and special application external paint work shall be as per direction of Engineer-in-Charge. Design ambient condition : a) air temperature 50 0C, b) Relative Humidity 90 % Max, c) Seismic Zone as per location of site, d) Altitude as per location/site. Noise level Shall not exceed limits as per NEMA TR-1 with all accessories running measured as per IEC 551 / NEMA standard. The transformer should have QR code which should contain drawing, test report OEM manual,Geo- Tag of manufacturing location etc. Marking Each transformer shall be provided with rating plate made of anodized aluminum/ stainless steel material securely fixed on the outer body, easily accessible,as per IS: 1180 Part-3. The entries on the rating plate shall be indelibly marked. Fitting and Accessories : The following fittings shall be provided:- a) Two earthing terminals with the earthing symbol b) Oil level gauge indicating oil level at minimum, 30°C and maximum operating temperature; c) Air release device (for non-sealed type transformers) d) Rating and terminal marking plates; e) Silica gel breather f) Drain-cum-sampling valve (¾″ nominal size thread, IS 554) preferably steel with plug for three phase transformers; g) Thermometer pocket with cap; h) Oil filling holes having (1¼″ nominal size thread) with cover (for sealed type transformers without conservator); i) Lifting lugs for the complete transformer as well as for core and winding assembly; j) Pressure relief device or explosion vent above 200 kVA; k) One filter valve on the upper side of the tank (for transformers above 200 kVA); l) Unidirectional flat rollers (for transformers above 200 kVA); m) Inspection hole (for transformers above 200 kVA); n) HV side neutral grounding strip (where one of the HV bushing terminal is connected to earth); o) Buchholz relay for transformers above 800 kVA. p) Arcing horns or suitable rating lightning arrestors for HT side – 3 Nos. q) Bird guard; r) Oil temperature indicator and winding temperature indicators for transformers above 200 kVA with suitable tripping mechanism above permissible limit s) Jacking pads (for transformer above 1 600 kVA); t) Additional Neutral separately brought out on bushing for earthing. u) Magnetic oil level gauge (for transformer above 1600 kVA) with low oil level alarm contact; v) Non return valve (for conducting pressure

test); w) Pressure relief device or explosion vent x). Monogram Plate y) Inspection cover z). Detachable type radiators with top and bottom shutoff valve. aa) Oil Conservator with Oil level indicator, minimum level marking and drain plug for all transformers of capacity 50 KVA and above. bb) Necessary hardware, clamps, lugs etc. for termination on HV/MV etc. for all transformers.

59 N/S Supply, Installation, testing and commissioning of 2 Pole mounted DP providing I no 11kv,400A GOC in accordence with ie rules& local authority specifications and drawing and comprasing the following 1 1 Set 85,000.00 ₹ 85,000.00

N/S 2 nos. of 11 mtr long MS Pole complete with Pole, excavation, MS foundation and back filling complete as required.

N/S AB Switch Horn Gap, HT fuse set, Lighting Arrestor Set, Pole Stay wire 4 set, required channel complete etc as required

60 7.8 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power H.T. cable with aluminium conductor for working voltage upto 11 KV as required.

61 7.5 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

62 DSR23.4 supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:

63 3.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. (For Lightning Arrestor) 1 1 Set 6884.00 ₹ 6,884.00

64 3.9 Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm). (For Lightning Arrestor) 30 30 Metre 133.00 ₹ 3,990.00

65 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. (For Transformer) 2 2 Set 6323.00 ₹ 12,646.00

66 3.5 Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. ( but without charcoal/ coke and salt ) as required. (For Transformer) 2 2 Set 12415.00 ₹ 24,830.00

67 3.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 50 50 Metre 1180.00 ₹ 59,000.00

68 3.9 Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) 50 50 Metre 133.00 ₹ 6,650.00

69 9.10 Providing and laying in position reinforced cement concrete 1: 2: 4 (1 : cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc. as required. (excluding reinforcement) 8 8 Cum 8721.00 ₹ 69,768.00

PART- 'F' DG SET

70 DSR Supplying, Installation, Testing & Commissioning of Unit Rate ‘Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as per CPWD specifications, should have QR code which should contain drawing, test report OEM manual,Geo- Tag of manufacturing location, rating plate as per relevant IS Code etc. and consisting of the followings: (A) Diesel Engine: Tourbocharged Diesel engine 4 stroke water cooled, multi cylinder, dynamically balanced fly wheel, electric start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 0C, 50% RH & at 1000 Meter MSL , capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be with Electronic governor, Dry type Air filter with service indicator, first filling of engine fuel (after commissioning) lubricating Oil, Coolant and other consumables complete with all the required accessories, the Electronic governor shall be as per ISO 8528.The engine shall comply to the latest CPCB norms (CPCB IV + or better) and Conforming to BS 5514, BS 649, IS 10000, IS 10002, IS 13018 and as per CPWD specifications. (B) Engine mounted Instrument Panel fitted with and having digital dis Plate for following: (i) Start-stop switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication and Voltage indication (vi) RPM indication (vii) Over speed indication (viii) Low lubricantion Oil trip indication (ix) Engine Running Hours indication (x) Fuel Level

(C) Alternator: Synchronous alternator rated of appropriate KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 0C, 50% RH & at 1000 Meter MSL. The alternator shall be having Screen Protected Drip Proof (SPDP) enclosure IP23, brushless, continuous duty, dynamically balanced rotor, capable of taking 10% over loading for one hour after 12 hours of continuous operation, self cooled,self-excited and self-regulated through AVR conforming to IS13364(Part 2)/IS: 4722/BS 2613 suitable for tropical conditions and with class- H insulation. (D) Base Frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. (E) FUEL TANK: Daily service fuel tank of suitable liters capacity as per CPWD Specifications, fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. (F) Exhaust System: Dry exhaust manifold with hospital type exhaust silencer and catalytic convertor. (G) Starting System: 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable numbers of batteries (180 AH capacity lead acid SMF type) as required as per specifications. The battery shall be housed inside the acoustic enclosure of DG Set.

(H) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere and the temperature rise inside the enclosure, noise level outside enclosure. The acoustic enclosure should be suitable for cable connection/connection through bus-trunking. Such arrangements on acoustic enclosure should be water proof & dust-proof conforming to IP-65 protection. The enclosure shall be as per CPCB IV + or better norms etc. and as per CPWD specifications. (I) AMF Panel: Free standing floor mounted IP 42 automatic mains failure control panel including auto by-pass, suitable for KVA as below for silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, Kilo Volt Ampere Reative Hour (KVARH), KVA (Phase & Total), KW & provision for overload, short circuit, restricted earth fault, under frequency, power (aluminium) and control (copper ) cabling of suitable size upto 15 meter between AMF panel, LT Panel and DG Set including connection interconnection etc. as required, all complete and inter locking and communication/ Ethernet /RS485/SNMP port open protocol for BMS integration including suitable software, the panel shall be of DG Set OEM make etc. as per approved by Engineering in charge and including the following: 1. Suitable numbers and appropriate capacity 4 pole motorised electrically operated draw out with cradle type 3 position ACB/ MCCB with electronic release for O/C & E/F and shunt trip. 2. Auto/Manual/Test/Off selector switch 3. Protection for under and over voltage phase reversal (2 nos Over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay). 4. 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering 5. Energy analyser unit to indicate current, Voltage( L N & L_L), kW, kVA (Phase & Total), Frequency, KWH, PF. 6. LED Indicating lamps for load on mains and load on set 7. Fuse/ MCB for instruments 8. Battery charger, complete with transformer/ rectifier

D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment. 9.Main supply failure monitor 10.Supply failure timer 11.Restoration timer 12.Control unit with three impulse automatic engine start/stop and failure to start lockout. 13. Impulse counter with locking and reset facility. 14.ON/OFF/Control circuit switch with indicator 15.Audio/Video annunciation for (i)High water temperature (ii)Low lubricating oil pressure (iii)Engine over speed (iv)Engine fails to start (v)Full load/maximum load warning 16.Protection for over/under Frequency, Loss of AC sensing, Over Current, Unbalancing load with suitable number of relays and accessories 17. Maintenance notification based on Engine Run Hour & due date. 18. Load Management through PLC to achieve auto opening and closing of incomer breakers, bus coupler switching of essential panel , interlocking providing signal to AMF Panel for load status and AMF shall give command to DG Set to auto start / auto stop depending upon load status and requirement etc. and necessary hardware and software required to perform the operation shall be provided by the contractor including all control wiring

71 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 2 2 Set 6323.00 ₹ 12,646.00

72 3.5 Earthing with copper earth plate 600mmX600mmX3mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. ( but without charcoal/ coke and salt ) as required. 2 2 Set 12415.00 ₹ 24,830.00

73 3.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 50 50 Metre 1180.00 ₹ 59,000.00

74 3.9 Supplying and laying 25 mm X 6 mm G.I. strip at 0.50 metre below ground as strip earth electrode, including connection/ termination with GI nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping with 2 sets of G.I. nut bolt & spring washer spaced at 50 mm) 40 40 Metre 133.00 ₹ 5,320.00

Total Electrical Amount ₹ 10,134,600.00

Total Civil+Electrical Amount ₹ 78,232,899.00

Executive Engineer

Building Division, Siwan