Provision of aluminum partition, false ceiling, vitrified floor tile and wooden work station at room no.237 and 238 of MCD Dept at CSIR-IMMT, Bhubaneswar (Civil and Electrical)

Amount

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) With float glass panes of 5.00 mm thickness

Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper

Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Providing and laying double charged premium vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Dismantling tile work in floors laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and fitting of SS workstation with granite top ( 1) having length -2.40 m, depth of 0.75m ,height 0.95 m made up with 4 nos 50 mm stainless steel square tube as vertical member.The top section consists of 4 nosand 2 nos 50 mm SS square tube(304 grade) in both direction respectively over which 18 mm thick premoulded granite slab shall be placed with necessary adhessive. The bottom section consists of 4 nos and 2 nos , 50 mm SS square tube in both the direction respectively over which 18 mm thick premoulded granite top shall be placed. as per approved design and includes required hardware as per drawing and design and direction of the EIC

Providing and fitting of SS workstation with granite top ( 2) having length -1.50 m, depth of 0.90m ,height 0.95 m made up with 4 nos 50 mm stainless steel square tube as vertical member.The top section consists of 4 nosand 2 nos 50 mm SS square tube(304 grade) in both direction respectively over which 18 mm thick premoulded granite slab shall be placed with necessary adhessive. The bottom section consists of 4 nos , 50 mm SS square tube in both the direction respectively as per approved design and includes required hardware as per drawing and design and direction of the EIC

Providing and fitting of wooden work station( 3) having length -2.40 m, width 0.60m ,height 0.75 m made up with 2 nos 19mm thick BWR ply placed horizontally at top and bottom ,3 nos 19 mm thick ply of lenth-0.37m,0.50m,0.30m and width 0.15 m placed horizontally at drawer bellow. 7 nos of 19 mm BWR ply of width 0.60m placed vertically .The work station will consists of one drawer of width 0.375m ,0.50m,0.30m respectively at top and openable door at bottom of same width .The front door including drawer shall be 19 mm ply and back side will be 9 mm thick BWR ply. All areas of cup board including drawer will be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC.

Providing and fitting of wooden work station for (4) having length -3.35m width of 0.60m ,height 0.75 m made up with 2 nos 19mm thick BWR ply placed horizontally at top and bottom ,4 nos 19 mm thick ply of size 0.20X.0.15 m placed horizontally at drawer bellow and 9 nos placed vertically .The top of the work station shall be separated with 3 nos , 10 mm thick moulded plain glass of size 0.60 X0.20 m .Each section will consist of one drawer at top and openable door at bottom of a width 0.20m .The front door including drawer shall be 19 mm ply and back side will be 9 mm ply. All areas of cup board including drawer will be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC

Providing and fitting of wooden battery stand (5)having two drawer at top and bottom and the middle portion is open having length -0.65 m, depth of 0.55m ,height 1.27 m made up with 4 nos 19mm thick BWR ply placed horizontally at top ,bottom and middle. 2 nos of 19 mm ply depth 0.55 m placed vertically .The drawer shall be of 19 mm ply at front ,side ,bottom and back.The back side will be of 9 mm ply. All areas of the stand including drawer will be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC.

Providing and fitting of wooden work station( 6) having length -0.75 m, depth of 0.60m ,height 0.75 m made up with 2 nos 19mm thick BWR ply placed horizontally at top and bottom ,1 nos 19 mm thick ply of lenth-0.30 m width 0.15 m placed horizontally at drawer bellow. 3 nos of width 0.60m placed vertically .The work station will consists of one drawer of width 0.30m at top and openable door at bottom of same width .The front door including drawer shall be 19 mm ply and back side will be 9 mm ply. All areas of cup board including drawer will be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC

Providing and fitting of wooden round shape workstation( 7) having Dia -1.20m ,height 0.75 m made up with 2 nos 19mm thick BWR ply placed horizontally at top and bottom ,4 nos 19 mm thick ply of width.0.40 m to form a box placed vertically to hold the top . All areas of work station including drawer will be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC

Providing and fitting of wooden material storage cabinet( 8A) having width -0.90 m, depth of 0.45m ,height2.10m.The cabinet has two sections.The bottom section of height 0.90 m made up with 3 nos 19mm thick BWR ply placed horizontally at top, bottom and middle. 2nos of 19mm ply placed vertically .the openable door made with 19 mm ply .The top section has 6mm thick openable toghtened plane glass doorfitted with appropriate glass door hinges with locking arragement .2 nos 10 mm moulded plane glass placed horizontally . All areas of cabinet will be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC.

Providing and fitting of wooden material storage cabinet( 8B) having width -1.20 m, depth of 0.45m ,height2.10m.The cabinet has two sections.The bottom section of height 0.90 m made up with 3 nos 19mm thick BWR ply placed horizontally at top, bottom and middle. 2nos of 19mm ply placed vertically .the openable door made with 19 mm ply .The top section has 6mm thick openable toghtened plane glass doorfitted with appropriate glass door hinges with locking arragement .2 nos 10 mm moulded plane glass placed horizontally . All areas of cabinet will be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC.

Providing and fitting of wooden workstation( 9) having length -1.70 m, depth of 0.90m ,height 0.75 m made up with 2 nos 19mm thick BWR ply placed horizontally at top and bottom ,4 nos 19 mm thick ply of width 0.15 m placed horizontally at drawer bellow. 4 nos of 19mm ply placed vertically .The work station will consists of 4 nos drawer at bothside .there shall be provision of key board tray at middle.The drawer and back side shall be of 19 mm ply All areas of work station including drawer will be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC

Providing and fitting of wooden appron rack (10) having width -1.06 m, depth of 0.45m ,height 2.10m made up with 5 nos 19mm thick BWR ply placed horizontally at top ,bottom and middle. 4nos of width 0.45m placed vertically .The appron rack will consists of openable door at top and bottom .The back side will be of 9 mm ply. All areas of the rackwill be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC.

Providing and fitting of wooden work station( 11) having length -2.75 m, depth of 0.60m ,height 0.75 m made up with 2 nos 19mm thick BWR ply placed horizontally at top and bottom ,1 nos 19 mm thick ply of width 0.15 m placed horizontally at drawer bellow. 8 nos of width 0.60m placed vertically .The work station will consists of one drawer of height-0.15 m at top and openable door at bottom of same width .The front door including drawer shall be 19 mm ply and back side will be 9 mm ply. All areas of work station including drawer will be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC

Providing and fitting of SS lab stool of circular shape with cushioned seat and back rest having height of seat -0.45m, dia of seat is of 0.40m made up with 4 nos 25mm stainless steel round tube as vertical leg .2 nos 20 mm SS round tube placed at seat rest ,middle and foot rest respectively. The seat made with 12 mm thick ply covered with 50 mm hard cushion and resin cover and the back rest support 20 mm SS round pipe is covered with necessary cushion with resin cover of approved colour and as per drawing and design and direction of the EIC

Providing and fitting of SS lab stool of circular shape with cushioned seat and back rest having height of seat -0.75m, dia of seat is of 0.40m made up with 4 nos 25mm stainless steel round tube as vertical leg .3 nos 20 mm SS round tube placed at seat rest ,middle and foot rest respectively. The seat made with 12 mm thick ply covered with 50 mm hard cushion and resin cover and the back rest support 20 mm SS round pipe is covered with necessary cushion with resin cover of approved colour and as per drawing and design and direction of the EIC

Providing and fitting of wooden wall rack( 13) having length -3.00 m, depth of 0.45m ,height 0.60 m made up with 3 nos 19mm thick BWR ply placed horizontally at top ,bottom and middle . 6 nos of 19 mm ply placed vertically .The front door shall be of 6 mm thick glass door and the back side shall be of 19 mm ply. All areas of the rack shall be laminated with 1.0mm thick laminate of approved colour and design and includes required hardware as per drawing and design and direction of the EIC

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq mm (Finolex/ Poly-Cab/RR / KEI make) ISI marked FRLS PVC insulated single core copper conductor cable in surface/ recessed PVC conduit medium class (Kinjal/ AKG /Polycab make) / ISI marked PVC casing capping as approved with modular type 5A switch, modular base & cover plate on suitable size modular type metal/PVC box (Legrand myrius /schneider clipsal/anchor woods) make incorporated with Neutral & Earth link & earthing the point with 1.5 sq mm FRLS PVC insulated single core copper conductor cable etc as required. Group – C

Supply and fixing 5/6 amps.modular type (1 module)switch on the existing modular plate & switch box including connections etc. as required. Legrand myrius /schneider clipsal/anchor woods make

Supply and fixing 5/6 amps.modular type socket (2 module) on the existing modular plate & switch box including connections etc. as required.Legrand myrius /schneider clipsal/anchor woods make

Supply and fixing15/16 amps.modular type (1 module) switch ISI marked as approved on the existing modular plate & switch box including connections etc. as required. Legrand myrius /schneider clipsal/anchor woods make

Supply and fixing 5 pin, 15/16 amps.modular (2 module) type socket on the existing modular plate & switch box including connections etc. as required. Legrand myrius /schneider clipsal/anchor woods make

Supply and fixing extra down rod of 20cm length GI/MS pipe , 15mm dia (heavy gauge) including painting (including fixing of the downrod in struss of proposed shed) etc as required.

Supplying and fixing of 4 (4+12)way, Double Door way, three pole and neutral, sheet steel, MCB distribution board , 415 volts, on surface/recess, complete with terminal blocks, duly prewired with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections,. including painting, earthing etc. as rquired. Legrand/Hager/Siemens/ C &S make.

Supplying and fixing of single pole 6 to 32 amps rating, 240 volts MCB (C series) of Legrand/schneider/Siemense in the existing MCB DB complete with connections, testing and commsissioning etc. as requried.

Supplying and fixing FP sheet steel enclosure on surface/ recess along with 32 A, 415 V "C" curve FP MCB complete with connections, testing and commissioning etc. as required. Legrand/schneider/Siemens make

Supplying and fixing 63amp, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens/ C &S make

Supply & fixing of modular type RJ-11 telephone socket in the existing modular box for telephone connection including connection etc as required. Legrand myrius /schneider clipsal/anchor woods make.

Supplying and drawing of 2pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed steel/ PVC conduit as required

Supplying and fixing Modular stepped type electronic fan regulator, 2 module, 120W in the existing modular switch box including connection etc as required. Legrand myrius /schneider clipsal/anchor woods make

Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top alongwith 20 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/schneider/Siemens make

Supplying and making end termination with brass compression gland and aluminium lugs for 3½ X 50 sq. mm size of PVC insulated armoured and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4 x 10 sq. mm size of PVC insulated armoured and PVC sheathed /XLPE aluminium conductor cable of 1.1 KV grade as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 4C x 10sqmm size on wall surface as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 3.5C x 50sqmm size on wall surface as required.

Providing and fixing 4 mm dia copper wire on surface or in recess or in existing pipe along with existing cable for loop earthing etc as required.

Supplying and drawing 3 x 1.5 sq mm of FRLS PVC (Finolex/ Poly-Cab/RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing 3 x 4 sq mm of FRLS PVC (Finolex/ Poly-Cab/RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing 6 x 4 sq mm of FRLS PVC (Finolex/ Poly-Cab/RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing 6 x 6 sq mm of FRLS PVC (Finolex/ Poly-Cab/RR / KEI make) insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.

Supply and fixing metal box of 200 mm x 300 mm x100 mm deep (For AC starter enclosure) on surface or in recess with suitable size of phenolic laminated sheet cover in the front including painting etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN, industrial type socket outlet, with 2 pole and earth metal enclosed plug top alongwith 20 amps. C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet, and complete with connections, testing and commissioning etc. as required. Legrand/Hager/Siemens/ C &S make

Supply and fixing of 12 modules, modular base & cover plate & modular type metal box (GI) on surface or in recess etc. as required. Legrand myrius /schneider clipsal/anchor woods make

Supply and fixing of 1 or 2 modules, modular base & cover plate & modular type metal box (GI) on surface or in recess etc. as required. Legrand myrius /schneider clipsal/anchor woods make

Supplying, installation, testing and commissioning of outdoor type floor mounted electrical panel made out of 2 mm thickness of metallic sheet steel of tentative panel size 1.0 mtr height & 1.0 mtr width (or as approved), including supplying, installation & internal wiring of following mountings complete as required, duly acid treated for derusting, primered and painted with powder coating of approved shade as per engineer in charge. a) Incommer:- One number 125amp, 36KA, 4P MCCB with extended rotary handle thermomagnetic release and terminal spreaders, Legrand/schneider/Siemens / L & T make . b) Outgoing:- Three number 100 amp, 30KA, 4P MCCB with extended rotary handle thermomagnetic release and terminal spreaders, Legrand/schneider/Siemens / L & T make . c) One number bus-bar chamber comprising four strips (40mm x 5 mm or equivalent ) copper bus-bar of suitable length mounted on insulator etc as required

Supplying and installation of starter for Air-conditioner Type-SS 96210 L&T /Siemens/ C &S make, coil voltage-230 ,Volt 50HZ. & O/L range 9-14 Amps on existing M.S. Box, etc as required .

Supplying and fixing of 20 mm ( 3/4 inch) size casing/caping (AKG/Kinjal/Polycab) in surface with all accessories etc. as required.

Supplying and fixing of 25 mm (1 inch) size casing/caping (AKG/Kinjal/Polycab) in surface with all accessories etc. as required.

Supplying & installation, testing and commissioning of prewired recessed mounting 2ft x 2ft downlighter LED fixture of more than 3000 lumen, light intensity > 100Lm/watt (Philips reensquare/Coreview/dayline/cirrus/any equivallent model of PHILIPS or lighting technology make) day light colour temperature with all accessories etc. including connections with 1.5 sq mm PVC insulated, copper conductor etc.as required.

Supplying & installation, testing and commissioning of prewired recess mounting round downlighter LED fixture of more than 1200 lumen, light intensity > 100Lm/watt (Philips gneen LEDI DN 193B LED12S / any equivallent model of PHILIPS or lighting technology lunar moon V2 10W make) day light colour temperature with all accessories etc. including connections with 1.5 sq mm PVC insulated, copper conductor etc.as required.

Supplying, installation, testing and commssioning of 1200 mm sweep white/milky/ivory colour BEE energy efficient ceiling fan, Air Delivery 215 M3/Min (Havells 5star / Usha Technix plus / C & G Aura plus make) including wiring the down rod with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required. (without downrod)

Supplying, installation, of Heavy duty metal body exhaust fan of 380 mm sweep , (USHA / Almonard / Havells /Crompton make ) in the existinge wall, including making the damage good, connection, testing, commissioning etc as required.

Supplying, installation, testing and commssioning of 400 mm sweep pedastal fan with inbuilt regulator of USHA / Havells /Crompton make.

Supplying & laying of DLP Trunking System (105mm*50mm) Polyvinyl Chloride (PVC), Non-flame propagating, colour shall be in White. DLP trunking system shall respect IK07 at ambient temperature. (Make- Legrand/ schneider) with following accessories: 105X50 Body, 105X50 Cover etc as required as per site requirement

Supplying & installation, testing and commissioning of prewired baten fitting/LED channel (box type) suitable for one number LED tube light of (Philips , Klite , lighting technology make) with all accessories and 1 no 2000 lumen led tube etc. directly on wall including connections with 1.5 sq mm PVC insulated, copper conductor, single core cable etc.as required.

Dismentalling of existing wiring, light, fan, electrical power board, Panel board, MCB DB, Switch board etc as per direction engineer inchage as per instruction.

TUSHAR PATI

BIRANCHI NARAYAN DAS