REPAIR TO JOINERY, FLOORING, RENDERING, BRICK WORK, TILING, CEILING ROOFSHEET, PLUMBING, SANITARY FITTINGS AND PERIODICAL SERVICES IN ZONE A AT BAGRAKOTE MIL STN UNDER GE SEVOKE ROAD

Amount

M&L for preparation of old plastered surfaces of walls and applying one coat of white wash complete all as specified and as directed.

All as per item No. 01 here-in-before but on ceiling.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15mm thick in CM 1: 6 on fair faces of brick/concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 including mixing WPC as per manufacturers instruction, finished even and smooth w/o using extra cement complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for preparation of new plaster surfaces and applying three coats of white wash on wall complete all as specified and directed.

M&L Preparation of new plaster surfaces and applying two coats of OBD over a coat of chalk whiting on wall complete all as specified and directed.

M&L for washing, rubbing down, stopping of distempered and painted surfaces of walls and applying distemper, one coat, with distemper oil emulsion, white or tinted complete all as specified and as directed.

M&L for complete removal of existing treatment of walls and applying distemper two coats, with distemper oil emulsion, white or tinted complete all as specified and directed.

M&L for preparation of old painted wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per item No. 11 here-in-before but surfaces not exceeding 10cm in width or girth when un-connected with other painting or when painted in a different tint complete all as specified and directed.

M&L for complete removal of existing treatment of walls and applying two coats of cement based paint over a coat of primer of any tint complete as specified and directed.

M&L for preparation of old painted steel and iron surfaces of any description, over 10cm in width or girth, not otherwise described, and applying one coat of synthetic enamel paint (1st quality ) complete all as specified and as directed.

M&L for prepartion of old painted steel or iron surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for writing letter or figures, using thick paint, as approved, (Block, Roman, Italic or Indian) not exceeding 30cm high complete all as specified and as directed.

M&L complete removal of existing treatment and applying two coats of weather exterior emulsion paint over one coat of primer on wall etc complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sqm each including guard bar, if any.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No.19 above, but without glazing bars complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay including one coat of red oxide primer complete complete all as specified and directed.

Hacking out broke glass (any thickeness and size) from metal frame including punching or drilling out old glazing pins/springs clips and providing and fixing new ones all directed by Engr in charge.

S&F 3mm thick float glass ordinary quality & glazing with oil putty in square not exc 0.50 Sqm in each pane all as specified & directed.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.00 Sqm each.

S&F pressed steel frames (Size-165X60mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zince chome primer complete all as specified .

S&F pressed steel frames (size-105X60mm) for doors with one rebate incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zince chome primer complete all as specified .

S&F solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in block for hold fast, filling in frames, copings or similar work and finished the surface with existing and including form work complete all as specified and directed.

Taking down shutters area exceeding 1.0 Sqm but not exceeding 2.0 Sqm each.

S&F Factory made 2nd class hard wood rail and style 35mm thick plain framed, panelled shutter (two panel ) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L 35 mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in frame complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed complete all as specified and as directed

S&F 100mm long butt hinges mild steel medium weight cold rolled etc complete all as specified and directed.

S&F mild steel tower bolts stove enameled black with bright bolt 200 mm long complete all as specified and directed.

S&F mild steel pressed handle oval type stove enamelled black 150 mm long complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts plate type stove enamelled black with bright bolts not less than 12mm dia with including a minimum of 6 bolts nut four on bolts plate & two on staple plate complete all as specified and directed.

S&F 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 150mm long anodized aluminium barrel tower bolts of extruded section complete all as specified and directed.

S&F Stainless Steel Butt Hinges 100mm Long complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Taking down shutters area exceeding 1.0 Sqm but not exceeding 2.0 Sqm each and refixing in the same opening after making minor adjustments, easing etc complete all as specified and as directed

S&F in repair Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) 0.56mm thickness as in fixing for door bottoms

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work and precast concrete articles.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan, exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M&L for Brickwork with sub-class `B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above GL) complete all as specified and directed.

M&L 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection & paving finished even & smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as sub base of flooring complete all as specified and as directed.

M&L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in floor, finished even and smooth using extra cement complete all as specified and directed

M&L glass dividing strips 38mm wide and 3mm thick and inserted in position to confirm to design complete all as specified and directed.

Dismantling wall & ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick decorative type non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)

Preparing of new non AC board surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for rendering in CM (1:4), 10mm thick on fair faces of brick work or concrete surfaces for fixing of wall tiles complete all as specified and directed.

M&L for screed bed or bedding layer of cement mortar 1:6, 15mm thick for laying floor finishes complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 300x200x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in Skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces complete all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section any position as in framed works.

M&L for second class hardwood timber scantlings clean sawn complete all as specified.

Dismantling plain or corrugated steel sheeting any gauge, thickness in roofs complete all as specified.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self drilling and self tapping screws, neoprene and limpet washers complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not other wise provided for.

S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane, gantries, rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc( Fe 410-W Gde-E-250) quality A Including preparation of surface and one shop coat of zinc chromate primer paint at contractors workshop before fabrication complete all as specified and directed by Engineer-in-Charge..

S&F Steel work in tubular trusses including special shaped washer etc complete using ERW of induction butt welded tubes conforming to I. S. 1161-1979 grade St-240 complete all as specified and directed.

M&L for preparation new wooden surfaces of any description over 10cm width of grith and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation new steel surfaces of any description or not other wise described n.exc 10cm width of grith and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M&L for preparation of new or previously untreated wood or wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide zinc chromate primer complete all as specified and as directed

Taking up or down galvanised steel water tubing 15mm bore from wall/ceiling/floor including all fittings, segregating and stacking the pipes and fittings properly at site for checking complete all as specified and as directed

All as per item No 74 above, but for 20mm bore.

Refixing old serviceable galvanised steel water tubing 15mm bore, (serviceable pipe obtained from item No 74 here-in-before) in new or old situation/alignment of wall, ceiling or floor including provision of all new fittings including discaling/cleaning of pipe (internally and externally) cutting and threading of tubing ends complete all as specified and as directed.

All as per item No 76 above, but 20mm dia retreived under ser no 75

S&F 15mm dia steel water tubing, galvanised, medium grade with all fittings and fixed to wall and ceiling or laid in floor in old/new position complete all as specified and as directed.

All as per item No.78 above, but 20mm bore.

S&F in repairs 15mm bore Chromium Plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs bib tap standard of PTMT, any colour, screwed for iron pipe of size 15 mm and fixed including taking down existing unserviceable bib tap. (minimum weight 90gm) complete all as specified and directed.

S&F in repairs, Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe 20mm bore complete all as specified and directed.

S&F in repairs, shower rose of size 125mm, chromium plated with or without swivel joint including fixing to steel pipe or union , including taking down existing unserviceable shower rose complete all as specified and as directed.

S&F in repairs 15 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 15mm - 142 gms) complete all as specified and directed.

All as per item No 84 above, but 20 mm bore (minimum weight 210 gms)

S&F in repairs 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions , complete all as specified and as directed

S&F in repair brass, CP wall mixture 15 mm bore with L-bend for overhead shower complete all as specified and as directed.

S&F in repair PVC connections 15mm bore with PTMT nuts of length 300mm, complete all as specified and as directed.

S&F Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) conneced to 15mm bore pipe complete all as specified and directed.

S&F Nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) connected to 20mm bore pipe complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank ( Triple layer) cylindrical vertical with closed top of capacity 500 liters, hoisted and fixed in position with connection ports (inlet, outlet and over flows) and connecting up pipes complete all as specified directed.

S&F rotational moulded polyethylene water storage tank ( Triple layer) cylindrical vertical with closed top of capacity 1000 liters, hoisted and fixed in position with connection ports (inlet, outlet and over flows) and connecting up pipes complete all as specified directed.

S&F rotational moulded polyethylene water storage tank ( Triple layer) cylindrical vertical with closed top of capacity 2000 liters, hoisted and fixed in position with connection ports (inlet, outlet and over flows) and connecting up pipes complete all as specified directed.

Taking down unserviceable PVC water tank of capacity exc. 250 litrs upto 500 ltrs and removing to store complete all as specied and directed.

Taking down unserviceable PVC water tank of capacity exc. 500 litrs upto 1000 ltrsand removing to store complete all as specied and directed.

Taking down unserviceable PVC water tank of capacity exc. 1500 litrs upto 2000 ltrs and removing to store complete all as specied and directed.

M&L for cleaning of service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits/scales, algae formations, silt/sticky matters adhering tank surface and washing inner tank surface with approved grade of chemical twice followed by re-cleaning with plain potable water to remove any trace of chemicals complete, of capacity exc 250 litres n exc 500 litres all as directed

All as per item No.97 above, but of capacity exc 500 litres n exc 1000 litres.

All as per item No.97 above, but of capacity exc 1000 litres n exc 2000 litres.

All as per item No.97 above, but of capacity exc 2000 litres n exc 3000 litres.

Notes :- for Item No.97, 98,99 & 100 above (i) On completion of cleaning of tank, date of cleaning to be marked/written clearly on tank surface in an accessible location with letters or figures not exc 5 cm high viz (as per example) “TANK CLEANED ON ------------” (ii) Cleaning of tank to be carried out in accordance with the schedule published for the purpose of cleaning of tank (iii) During cleaning of the tanks, any vegetation and growth on the roof slab shall also be removed by the contractor and the quoted rates are deemed to include for the same.

S&F in repairs wash hand basin, vitreous china white of size 550x 400mm including brackets,32mm dia waste fitting, brass, chromium plated and PVC waste pipe 32mm bore complete all as specified and directed.

S&F in repairs, vitreous China, Ist quality, wash down water closet (Pedestal pattern) with seat cover with complete set complete all as specified and directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern of size 580x440mm white with and including 'P' or 'S', with integral foot rests (excluding flushing cistern & flush pipe) including provision of lime concrete bedding , unserviceable connections etc and connecting up, complete all as specified and directed.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as dirceted.

S & F in repairs flushing cistern, 10 Ltrs. Capacity, PVC valveless, syphonic action type with dual flushing system, low level,white with inlet, ball valve,float and handle including brackets, flush pipe of polyethylene PVC 32mm dia, complete all as specified and directed.

S&F in repairs 15mm bore CP fancy type Health faucet with 1 meter long tube with CP wall bracket complete all as specified and as directed.

S&F in repairs 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement & other end fixed complete all as specified and directed.

S&F in repair PVC connections 15mm bore with PTMT nuts of length 450mm, complete all as specified and as directed.

S&F 32mm bore high density polyethylene pipes (LDPE) of pressure rating 6 Kgf / cm2, fixed to walls, ceiling or laid in floors etc, complete all as specified and directed.

M&L for preparation of new or untreated surfaces of walls and applying two coats of oil based distemper emulsion over a coat of chalk whiting on wall complete all as specified and as directed

S&F in repairs 2-in-1 bib tap, chrome plated 15mm bore, fixed to pipe complete all as specified and as directed

S&F in repairs Aluminium (Extruded section body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S&F Stainless Steel 20mm dia Curtain Rod complete all as specified and directed.

Supply only Stainless Steel brackets, fancy type for fixing 20mm dia curtain rod complete all as specified and directed.

S&F Powder coated (minimum thickness 50micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Powder coated (minimum thickness 50micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with aluminium frame work complete all as specified and directed.

M/S Bikash Saha

M/s. STRUCTURES INDIA

AJOY PAUL

M S BHARAT CONSTRUCTION CO.

SRI SURAJIT SENGUPTA

The Associated Construction And Co

B K SINGH

M/S JANARDAN SHARMA AND SONS