S/R to Talua Musatikiri road for the year 2025-26

Dismantling and removing cement concrete including stacking the useful materials for reuse and removing the debris within 50m lead etc. complete as per direction of Engineer-in-charge.

Construction of R.C.C.M 25 grade in cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical railing post not to exceed 1 in 500, centre-to-centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications complete as per direction of Engineer-in-charge.

Wearing coat

20 mm Cement Plaster ( 1:4) for mortar & finished smooth surface Incl.all charges complete as per direction of Engineer-in-charge.

Priming one coat with any approved primmer including cost of primmer & labour to give an even shade excluding cost of primer. complete as per direction of Engineer-in-charge.

Painting on concrete surface Providing & applying two coats of Water Based Cement Paint to unplastered concrete surface after cleaning the surface of dirt,dust, oil,grease,efflorescence & applying paint @ of 1lt/2 Sqm complete as per direction of Engineer-in-charge.

Clearing and grubbing the road land including uprooting Rank vegetation grass bushes shrubs etc complete as per direction of Engineer-in-charge.

Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per Clause 406 of MoRT&H Specifications for Road & Bridge works complete as per direction of Engineer-in-charge.

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per MORD Technical Specification Clause 502 for low porosity surface and as per direction of Engineer-in-Charge.

Providing and applying Tack Coat with 60/70 penetration grade of bitumen using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Clause 503 of MoSRT&H Specifications for Road & Bridge workscomplete as per direction of Engineer-in-charge.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement as per MORD technical Specification Clause 301 and direction of the Engineer in Charge

Providin & laying Semi Dense Bituminous Concret with batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder of 60/70 penetration grade of bitumen, transporting the hot mix to site, laying with a hydrostatic paver finisher with sensore control to the required grade, level & alingment, roling with smooth wheeled,vibratory & tandem rollers to achieve the desire compaction as per clause 508 of MoSRT&H Specifications for road and bridge works (complete as per direction of Engineer-in-charge.

Earth work in excavation of fondation in hard soil within the initial lead & lift including dressing & levelling the bed & depositiong the excavated earth away from the site etc. all complete as per the direction of Engineer in Charge.

Filling sand-Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge.

P.C.C(1:3:6) using 40mm size H.G.metal well rammed with cost, Conveyance , royality,taxes of all material and labour,T & P etc.Complete. as per direction of Engineer in charge.

PCC (1:2:4) with 12mm size HG crusher broken chips, well rammed with cost, Conveyance , royality,taxes of all material and labour,T & P etc.Complete. as per direction of Engineer in charge.

Providing, supplying, fitting and fixing of 80mm thick interlock concrete colour Paver Block on compacted river coarse sand free from all organic materials and filling the joints with sand including cutting corbelling, spalays where ever necesssary to proper size with cost, conveyance with all labour and materials etc. complete as per direction of Engineer-in-charge.

Please Enable Macros to View BoQ information