Renovation of various park in Sector 12 and 17 ward 06 Municipal Corporation Gurugram

Amount

N.S. Item

Arm and ShoulderWheel:- Providing, and fixing Arm and Shoulder Wheel of size 130 X '1200 X 1350 mm make of Green Gym or Equivalet fabricated with main post of 140 mm dia and 3.0 mm thic rest of the pipes are 40mm dia and 2.5 mm thick all pipc made up of hot roiled tubular steel and hot dippe galvanized, and powder coated using Akzo Nobel c equivalent of 80-120 micron thick. All welding joints of pip are robotic welded with joints scalloped as necessary an dressed off removing sharp edges and burrs. Zinc prime paint to be applied at all welding points prior to finishink Padals shall be made up of Nylon alloy with rounded edg of prevent any impact of injury and seat to be made fror virgin LLDPE manufactured by rotational moulding wit minimum thickness of plastic 4.00mm, colourful and resistant environmental friendly. Bearing used shall b maintenance fire, duly oiled sealed and self lubricated mad bY reputed company to be approved by Officer -in-Charge Equipment to be fitted within built limiters to preven unwanted movements. All open ends of pipe to be colourel by GI/LLDPE caps for user safety. The equipment to b fixed on ground with concrete of minimum strength M2: nd J shaped welded bolts and once the concrete is set, ft ;he equipment on to it and cover nuts and bolts with the bas Mate cover, all complete as per direction and approval o -2,ngineer-in-Charge regarding material, shape of equipment olour on metal, seat and base cover plate and fixing o equipment etc.

Horse Rider Station:- Providing, and fixing of horse rider station of size 1000 x 600 x 1100 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Alczo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Engineer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and a. .royal of arge regari ing materia , s ape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc.

Elliptica exerciser: Providing designing and fixing elliptical exercise of size 1200 x 540 x 1600 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior

Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40 mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix

Washed stone grit plaster on exterior walls of height upto 10 metre above ground level, in two layers, under layer 12mm cement plaster 1:4 (1cement: 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand :2 stone chipping 10mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in- charge (Payment for providing grooves shall be made separately).

(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical m.s pipe of size 88 mm and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade.(ii) 12 No. spndred and 6 no. FriezesFloral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U Paints.(iii ) 3 No. cast iron/frp base panel railing with frameFloral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing

Multi Play activity station Covering Area: 30’L x 18’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5'H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no. FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Leaf Canopy – 2 no. FRP Deer Figure on Leaf canopy – 2 no. FRP Fancy Railing Frog & Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. FRP Rock Climber at 5’H-1no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical m.s pipe is of 3” x12G of I.S.I Mark – 2 no Complete item with GST, Transportation, Installation with C.C & labor at site.

Victorial Steel sitting bench of size 61"(L)x29½” (H)x 18½” (D). Seat with 5 steel pipe and back with five steel pipe of size 47mmx23mm rectangular of 16 gauge ISI mark e.r.w. spl. Pipe fixed with C.I. frame on both sides with durable nut-bolts duly welded to protect it unscrew. All duly anti rusting Red Oxide primered before P.U. bus green spray paint coating long lasting. (Including all taxes)

Pull Chair:- Providing, and fixing of Pull pair of size 2500 X 800 X 2000 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the pipes are 40mm dia and 3.0 mm thick all pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc .primer paint to be applied at all welding points prior to finishing. Pedals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be' made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GULLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of

Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped

Providing and fixing Concertina coil 0.75mm expension of case 7m/coil with high tensile spring steel size 2.50mm dia including M.S angle nut & bolt and carriage, loading and uploading in all respect.

Bidder Name

Amount

Big Brother Traders(GSTN-NA)

McCROMIK IND.(GSTN-NA)

McCROMIK IND.

Big Brother Traders