Planning and Designing of Exhibit work of Museum including interior Fit out Technology Software Electrical and Networking works including O and M of 3 years at Sri Guru Ravidass Ji Museum Khuralgarh Hoshiarpur Punjab

Dismantling of brick work in cement sand mortar / limemortar including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material.& staking the serviceable material with all lifts& lead of 100 metre (By Mechanical Means)

Dismantling of PCC including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material.& staking the serviceable material with all lifts& lead of 100 mtr (By Mechanical Means)

Dismantling of pre-stressed / RCC including T&P scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material. & staking the serviceable material with all lifts & lead of 100 mtr (By Mechanical Means)

Dismantling glazed tiles (to be carefully removed).

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc.

Centering and shuttering for columns (Square or rectangular or poly gonal in plain)

Centring and shuttering for stair cases with sloping withsoffits including risers and stringers.

Centering and shuttering for flat surfaces such assuspended floors, roofs, landings, chajjas, shelves etc

Centering and shuttering for sides and soffits of beam,beams, launching girders, bressumers, lintels

Cement concrete 1:4:8

Cold twisted deformed (Ribbed/ Tor steel)Bars (Fe500 grade as per IS1786-2008) , for R.C.C works,where not includingin the complete rate of RCC including bending and binding placing in position complete.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Sand filling under floor and in wells of bridge foundation including handling withing 100 metres

Providing and laying Polished Granite stone18 mm thick flooring in required design and patterns, in linear a swell as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20mm(average) thick base of cement mortar 1:4(1cement : 4coarsesand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc.all complete as specified and as directed by the Engineer-in-Charge.

Providing & laying Epoxy Flooring 2mm thick (overall thickness) with selflevelling with Hi- build epoxy primer 100 micron thickness, self leveling epoxy screed 900 micron thickness, FQ sand and self levelling epoxy top coat having thickness 1000 micrones with all materials as mentioned / required to provide desired finish to the entire satisfaction of Engineer in charge,

Providing and fixing homogeneous/vinyl PVC floor tiles of approved quality and make, minimum 2.0 mm thick, laid over prepared surface using approved adhesive, including all necessary cutting, fitting around fixtures, finishing, and cleaning complete in all respects as directed by the Engineer-in-Charge.

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading.

20mm thick cement plaster 1:4 in two coat work

12.5 mm thick cement plaster 1:5

Plastering on underside of ceiling 6 mm thick cement plaster 1:3

Sal wood chowkats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position

Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge.

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified abovebut including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick Gl sheet (Zinc coating not less than 120 gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm. The frame will have a provision of G.I. anchor fastners 14 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with factory made template for SS ball bearinghinges of size 100x89x3 mm for fixing of fire rated glazed shutter. The frame shall be finished with an approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge. (Cost of SS ball bearing hinges is excluded)

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.l. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c, including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-Charge with glass, of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (E120). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & El. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (wxh) or 2.42 sqm.

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodicc oating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colouror shade with nuts and screws etc. complete :

Providing, supplying, installing, testing and commissioning automatic sliding glass door system comprising heavy-duty powder-coated/anodized aluminium frame, toughened clear glass panels of approved thickness, microprocessor-controlled automatic sliding door operator, motion sensors, safety sensors, drive unit, guide rails, locking arrangement, power supply unit and all necessary accessories, complete as per manufacturer's specifications. The item shall include all fittings, fixtures, labour, cutting, fixing, alignment, testing and commissioning complete in all respects and as directed by the Engineer-in-Charge.

Providing, supplying, installing, testing and commissioning architectural manual/automatic revolving entrance door assembly comprising curved enclosure, central shaft, 3-wing or 4-wing toughened glass revolving door system, heavy-duty aluminium/stainless steel framework, top and bottom support mechanism, floor spring/drive unit, motion and safety sensors (for automatic operation), control panel, locking arrangement and all necessary hardware and accessories complete. The door shall be fitted with approved quality toughened safety glass of specified thickness and finished in approved colour/shade. The item includes all labour, materials, fittings, fixtures, anchoring, alignment, testing, commissioning and making the system fully operational, complete in all respects as directed by the Engineer-in-Charge

Cost of aluminum fittings complete for doors, windows such as tower bolts, handles, Stoppers and screw etc. for these fittings (Excluding sliding bolt)

Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect

Soft Content Part

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding, bending and placing in position complete

Artwork development The agency shall deploy a qualified nominated artist to undertake the complete artwork development process for the project, including concept creation, design development, refinement, and finalization of all artistic content and visual elements. Artwork development & Graphic design for Exhibit surfaces, layers, cutouts, images,text, maps & models/ artefacts (if required). The Scope of Work will include but not be limited to the following: design, composition, archival restoration / clean up & pre-production processes and use of existing suitable images & creation of illustrations, photography including colouring, painting as per defined style / type wherever required. Deliverables will include supply of color printouts for approval and soft files of the same. Cost of print media, proof checking / revisions, translations, handling, carriage, etc complete in all respects and as per directions of Engineer in Charge. Mode of measurement will be flat or curved elevation area as per CAD drawings and or physical measurement. Final submission of approved final artworks in print ready format will be made in a commonly used open format. No proprietry software will be acceptable.

Fabrication Works Structual steel work in angles, tees, flats, rivited, including cutting, fixing all guset plates, bolts, nuts, rivets etc. with hoistng and erecting in position. a) For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span

12mm WPC Cladding Providing and fixing of approved brand of 12mm Thick WPC Board to existing MS Framework or other subconstruction with suitable screws, adhesive, hardware as required including profile cutting, drilling, passages for services, levelling and finishing of joints to provide a seamless smooth, surface complete in all respects and as directed by the Engineer in Charge.

ACOUSTIC PENELLING Providing and fixing of 69mm thick wall panel system using Polyester fibre acoustic mat finish panel 10mm thick @ 200kg/m3 density with Class A fire rating as per ASTM E 84 & thermal conductivity 0.034w/mk with desired acoustic management 0.85 NRC. The G.I. frame of thickness 0.50 consists of GI metal stud frame of size 50mm having one flange of 41mm and other of 44mm placed @ every 600 mm c/c in vertical direction .These studs are placed at floor and ceiling channels of 76 mm width and 0.50 mm thick and having equal flanges of 32 mm. The floor and ceiling channels are fixed to floor and soffit using fasteners at every 600mm c/c. A horizontal frame section is placed at every 600 or 1200mm c/c .The Polyester wadding of thickness 50mm and density 48Kg/m3 is fixed in between the studs enact with chicken mess .On outer side one layer of 9mm perforated water proof WPC board is screwed .These boards are joined using “type S” Self tapping SS W 25 / 3.5 x 25mm corrosion resistant drywall steel screws spaced at 200mm centres on all joints and 300mm centres in the field of boards. Screw fixing is done mechanically. These boards are perforated ensuring min. 50% area is perforated. Finally 10mm thick ECHOBAR Polyester fibre acoustic panels are pasted on top of WPC board (using any acrylic adhesive such as fevicol SR998 or hot melt adhesive) of the board as per design of the architect. The entire system should eco-friendly, 100% recyclable & toxic free, complete in all respects and as directed by the Engineer in Charge.

Providing and fixing at Site, 3mm ACP backed Printed Vinyl with 3mm ACP Profile Cut Layers and Cutouts as per approved artworks and shop drawings, finished with a 3mm ACP skirting of height 100mm, color as approved, complete in all respects and as directed by the Engineer in Charge. Print Media and Printing: 100 % opacity,self adhesive,plain OR Textured finish, ASTM E84 Class 1 or A rating OR ASTM E84 Class 2 or B rating, CAN ULC S102.2 (MPI 2611) - Flame Spread Rating: 10 , Smoke Developed Classification: 40. Suitable for Solvent based inkjet printing, mild/eco solvent inkjet, UV inkjet or Latex inkjet printing. 3mm ACP with acrylic spacers, edge & rear side finishing, jointing, levelling etc complete.

Low Relief Mural Low Relief Mural made of good quality FRP, interior and model making materials complete as per Approved Artwork, Shop Drawings & Visual Representations duly installed at Site and complete in all respects and as directed by the EIC including but not limited to passages for services, lights, and produced as per standard best practices of moulding, casting, finishing, coloring, painting, installation etc.

Vinyl Prints Supplying and fixing Vinyl print on 3M/LG/Avery media by UV /Latex/ EcoSol - inkjet printing with installation including matt/gloss lamination at site as per art work the rate including cost of pasting ,carriage all labour ,material and other incidental charge etc all complete as per direcation the Engineer in Charge.

ACP Skirting Supplying and Installation 4mm thik 150mm ACP skirting, fixing With Silicon.to be completed as per direcation of the engineer in charge ,all aspects including cost of carriage all labour ,material and other incidental charge etc all complete as per direcation incharge.

MDF Panel (4 mm Thickness) Providing, supplying, cutting, shaping, fitting and fixing approved quality Medium Density Fibreboard (MDF) of 4 mm thickness, conforming to relevant IS standards, including all necessary cutting, edge finishing, joining, fixing arrangements, screws, adhesives, hardware, supports, labour, tools and consumables required for complete installation as per approved drawings and directions of the Engineer-in-Charge. The item shall include transportation, handling, loading, unloading, wastage, and all incidental works necessary to complete the job in all respects.

Paint Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade.

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acryllic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface.Complete as per specifications

Gypsum False Ceiling Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect

Hanging Vertical Canvas Bunting Providing, fabricating, printing, supplying and installing Hanging Vertical Canvas Buntings made from high-quality premium-grade canvas fabric (minimum 280 GSM), digitally printed with approved artwork/design in multi-colour, including top and bottom aluminum/metal support rods, suspension wires/cables, eyelets, clamps, hanging brackets, fixing hardware, stitching, finishing, transportation, lifting, installation at all heights, and all incidental accessories complete as per approved design and directions of Engineer-in-Charge. The rate shall include preparation of artwork adaptation, printing, fabrication, erection, maintenance during the event/display period, and removal after completion if required, complete in all respects.

12mm Glass Panels Providing, Fabricating & Fixing in position 12mm Toughened Glass Partition with all the required and necessary hardware systems,brackets, handle systems, anchoring mechanisms, magnets, spacers, studs, screws, rawl/wall plugs, bolts, beadings, battons, creation of templates wherever required, UV based adhesives and sealants, silicone based adhesives and sealants, tooling, cleaning of glass with white petroleum at 2 stages once at the time of mockup erection and once after final erection. Item to include all wastage, carriage and labour required to fitout the glass panels as per the required design. The item to include providing sufficient soft as well as hard copy of all shop drawings for approval of competent authority and for good execution.

Pepper's Scrim Supply, Installation, Testing and Commissioning of Pepper scrim suitable for both front and rear projections including all material, labour and carriage in all leads and lifts complete as per entire satisfacton of the Project Manager.

Shark's Tooth Gauze Supply, Installation, Testing and Commissioning of Sharks tooth Screen suitable for both front and rear projections including all material, labour and carriage in all leads and lifts complete as per entire satisfacton of the Project Manager.

Supply, laying, testing and commissioning of professional 2-core loudspeaker cable suitable for fixed AV, auditorium, museum, background music and distributed speaker installation. The cable shall have 2 × 2.5 sq.mm conductors, equivalent to approximately 13 AWG, with stranded copper-clad aluminium conductor construction and flexible PVC outer jacket. The cable shall be suitable for low-impedance and 70V/100V speaker line wiring, with conductor resistance not more than 1.12 Ω / 100 m and rated voltage of 300 V. It shall have colour-coded polarity identification, parallel/separable core construction and metre marking for easy installation. The cable shall comply with RoHS / REACH and flame-retardant requirement as per EN 60332-1-2, CPR Euroclass Eca. The cable shall be supplied in 300 m roll or required length, properly dressed, labelled, terminated and tested after installation.

SITC of Track mounted adjustable LED spot light with adapter for installation on electrified 3 phase dali track, approx 17W, CRI90 having net lumen output not less than 1840lm, super pure anodized aluminium reflector supported by OPTIBEAM LENS technology to guarantee a well-defined eliptrical light distribution beam( 82° X 102°). The Fxiture should have McAdam Step 2 led engine. Body made of die-cast aluminium and front screen made of a thermoplastic material. Spotlight's double adjustability allows a 360° rotation about the vertical axis and 90° tilting relative to the horizontal plane. Led Engine consisting of Warm White tone 3000K linear PCB LED with the led life > 50,000h - L80 - B10 (Ta 25°C). Product would have a imbilt dali control gear along with overvoltage protection of 2kV Common mode & 1kV Differential mode. Fixture should have an option of White, Black finish as per site requirement. Fixture should be rectangular in shape and dimentions should not be more than 130mm X 110 mm. Available accessories includes a louver, a soft lens and an asymmetric visor. Complies with EN60598-1 and pertinent regulations and should be BIS certified.

LED Flexible Strip 24V, 9.6W/m, 990lm, IP20 :3000°K, CRI>90 : 2835 - 3-step McAdam binning.

Aluminum Profile with Cover

SITC of Cover Strip (2.0m) - as required for above track

SITC of Control 3 Phase End Cap - as required for above track

SITC of Display media server with HD outputs as required , synced together. It should be capable of capturing content. Original windows 10/11 embedded with i7 six core CPU with Rugged cooling system. with 32GB RAM, 2 nos 512 NVME drives raid 0 drives for media playback , 1 nos. 256 GB NVME for operating. It should also have genlock and framelock capability. Should also have Art-net Ethernet in/out. to complete the job with all respects.

Supply, Installation, Testing and Commissioning of License Software for calibration with 1 output ,audio and graphics layers to be loaded on 4 output Servers etc complete as required.

Supply, Installation, Testing and Commissioning of Show control software, controlling multiple outputs, unlimited audio and sequences to be loaded on Show control Server etc complete as required. Projection mapping software, Playback control System to manage, schedule and all projector /Screen control the media severs. It should have direct control on inputs and media playback. It should have an option of being controlled by an external unit integrated with the software. to complete the job with all respects.

Supply, installation, Programming, testing and commissioning of rack-mountable central control processor with advanced multi-core control engine, designed for automation and integration of AV, lighting, shading, environmental and building control systems. The processor shall support Gigabit Ethernet connectivity, onboard IR/Serial, COM, digital/analog I/O, relay and control network ports, USB host connectivity, memory card support, and secure enterprise-class control architecture. The controller shall support centralized monitoring, web-based control, remote programming access, and mobile device integration for system operation and management. The processor shall be suitable for deployment in commercial, institutional and government applications and shall be complete with all accessories, mounting hardware, interconnections and commissioning as required.

Supply installation testing and commissioning of 19" Equipment Rack of 12U size.

Supply, Installation, Testing and Commissioning of 16 Giga port POE network Switch with OFC Ports i/c connection etc as required.

Supply, Installation, Testing and Commissioning of Fiber distribution box fully loaded for 24 fibers.

Please Note that all kind of Cables, Conduit and cable tray, Raceway, Spliter electrical panel, DB's etc Like HDMI, DVI, CAT6, Signal cable. DMX cable power cables up to 3C X 10sq mm, all kind of connectors etc complete as per requirement. Item to include all material, labour and carriage in all leads and lifts complete as per entire satisfaction of the Project Manager to smoothly run the entire technology system are to be considered in Equipements cost. Nothing Extra will be paid for these items.

Fabrication Works Structual steel work in angles, tees, flats, rivited, including cutting, fixing all guset plates, bolts, nuts, rivets etc. with hoistng and erecting in position. a) For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span

ACOUSTIC PENELLING Providing and fixing of 69mm thick wall panel system using Polyester fibre acoustic mat finish panel 10mm thick @ 200kg/m3 density with Class A fire rating as per ASTM E 84 & thermal conductivity 0.034w/mk with desired acoustic management 0.85 NRC. The G.I. frame of thickness 0.50 consists of GI metal stud frame of size 50mm having one flange of 41mm and other of 44mm placed @ every 600 mm c/c in vertical direction .These studs are placed at floor and ceiling channels of 76 mm width and 0.50 mm thick and having equal flanges of 32 mm. The floor and ceiling channels are fixed to floor and soffit using fasteners at every 600mm c/c. A horizontal frame section is placed at every 600 or 1200mm c/c .The Polyester wadding of thickness 50mm and density 48Kg/m3 is fixed in between the studs enact with chicken mess .On outer side one layer of 9mm perforated water proof WPC board is screwed .These boards are joined using “type S” Self tapping SS W 25 / 3.5 x 25mm corrosion resistant drywall steel screws spaced at 200mm centres on all joints and 300mm centres in the field of boards. Screw fixing is done mechanically. These boards are perforated ensuring min. 50% area is perforated. Finally 10mm thick ECHOBAR Polyester fibre acoustic panels are pasted on top of WPC board (using any acrylic adhesive such as fevicol SR998 or hot melt adhesive) of the board as per design of the architect. The entire system should eco-friendly, 100% recyclable & toxic free, complete in all respects and as directed by the Engineer in Charge.

Plywood Paneling/Partition - 19mm Providing and fixing of approved brand of 19mm Fire Retardant Thick Ply Board For miscellaneous Framework or other subconstruction with suitable screws, adhesive, hardware as required including profile cutting, drilling, passages for services, levelling and finishing complete in all respects and as directed by the Engineer in Charge.

Auditorium Chairs Providing, supplying, installing and fixing premium auditorium chairs of Godrej Jupiter or approved equivalent make, upholstered in approved coloured fire-retardant fabric, having ergonomically designed high-back seat and backrest with moulded polyurethane foam cushioning for superior comfort. The chair shall comprise powder-coated M.S. support structure, injection-moulded polypropylene seat and back covers, upholstered armrests, automatic seat tip-up mechanism, and floor-mounted pedestal supports fixed with suitable anchor fasteners. The item shall include all components, accessories, hardware, fixing arrangements, transportation, loading, unloading, installation, testing and commissioning, complete in all respects as per approved drawings and directions of the Engineer-in-Charge. Technical Specifications: Upholstery: fire-retardant fabric Seat & Back Cushion: High-density moulded PU foam Seat Mechanism: Automatic tip-up system Structure: Heavy-duty powder-coated M.S. frame Seat & Back Covers: Injection-moulded polypropylene Fixing: Floor-mounted with anchor fasteners Performance: Minimum 50,000-cycle seat tip-up durability test Certifications: Manufacturer certified to ISO 9001, ISO 14001 and ISO 45001 Warranty: Minimum 3 years against manufacturing defects

Acoustic core Providing and fixing Fire Retardant (FR Grade) acoustic core insulation material comprising resin-bonded fiberglass, mineral rockwool or polyester acoustic wadding of approved make, having density not less than 48 kg/m³ and up to 96 kg/m³ and thickness ranging from 25 mm to 50 mm, backed with factory-laminated black acoustic tissue/fleece facing. The material shall be installed within acoustic wall panels, ceiling systems, partitions or other acoustic treatment assemblies as per approved drawings and specifications. The item shall include cutting to required sizes, positioning, fixing, joint treatment, edge finishing, handling, wastage, scaffolding, labour, tools and tackles, transportation, loading, unloading and all incidental works complete. The insulation material shall possess sound absorption properties suitable for auditorium, theatre, studio, museum and conference hall applications and shall conform to relevant fire-retardant performance requirements, complete in all respects as directed by the Engineer-in-Charge.

Fabric Wrapping & Track System for Acoustic Panels Providing, supplying and installing concealed PVC or extruded aluminium fabric track/gripper system of approved make and profile, suitable for stretch fabric acoustic panel applications, fixed to wall, ceiling or panel framework as per approved drawings. The system shall be designed to provide a seamless, wrinkle-free and removable fabric finish and shall include all necessary PVC/aluminium tracks, corner pieces, fixing clips, screws, fasteners and accessories complete. The track system shall be wrapped with approved fire-retardant, acoustically transparent fabric of approved colour, texture and pattern, capable of allowing sound transmission without affecting acoustic performance. The item shall include stretching, tensioning, trimming, finishing, cutting to required sizes, edge detailing, labour, tools and tackles, scaffolding, transportation, loading, unloading and all incidental works required to complete the installation in accordance with the specifications and direction of the Engineer-in-Charge.

Acoustic Ceiling Tiles Providing, supplying and fixing high-density compressed fiberglass/mineral wool acoustic ceiling tiles of approved make, size 600 mm × 600 mm, 600 mm × 1200 mm or 600 mm × 1800 mm, and minimum 25 mm thickness, having a Noise Reduction Coefficient (NRC) of not less than 0.85 and fire-retardant properties conforming to relevant standards. The tiles shall be installed in approved suspended ceiling grid system comprising hot-dip galvanized steel main runners, cross tees, wall angles and suspension arrangements, complete with hangers, anchor fasteners, clips and accessories. The work shall include cutting, edge finishing, alignment, levelling, handling, transportation, loading, unloading, labour, tools and tackles, wastage and all incidental works required for a complete installation as per approved drawings and direction of the Engineer-in-Charge. The acoustic ceiling tiles shall provide effective sound absorption, dimensional stability, sag resistance and aesthetic finish suitable for auditoriums, theatres, conference halls, museums, studios and other acoustically treated spaces.

Frame Work & Structure for Acoustic Wall/Ceiling System Providing, supplying and fixing framework for acoustic wall/ceiling treatment comprising 50 mm × 25 mm × 0.50 mm thick galvanized iron (GI) channels/studs of approved quality, fixed to walls, ceilings or supporting surfaces with nylon sleeves, anchor fasteners, screws, cleats and other necessary fixing accessories at required spacing and locations as per approved drawings and manufacturer's recommendations. The framework shall be properly aligned, levelled, cut, bent and secured to receive acoustic insulation, fabric panels, acoustic boards or other finishing materials. The item shall include all materials, hardware, drilling, cutting, fixing, scaffolding, labour, tools and tackles, transportation, loading, unloading and all incidental works complete in accordance with specifications and direction of the Engineer-in-Charge. The GI framework shall be corrosion-resistant, dimensionally stable and capable of supporting the complete acoustic treatment assembly without deflection or deformation.

Speaker Supply, installation, testing and commissioning of high-performance 12-inch two-way passive loudspeaker suitable for foreground music, museum AV playback, immersive audio, auditoriums, cafés, multipurpose spaces and high-SPL distributed sound applications. The loudspeaker shall have minimum 1 × 12-inch LF driver with 2.5-inch voice coil and HF compression driver with 1.7-inch voice coil / 1-inch throat. It shall have 8 Ω impedance, minimum 400 W AES continuous / 800 W program / 1600 W peak power handling, sensitivity of minimum 99 dB, and maximum SPL of minimum 125 dB. Frequency response shall be 58 Hz–20 kHz ±3 dB or better, with passive built-in crossover and 90° horizontal × 70° vertical rotatable horn coverage. The loudspeaker shall have rugged installation-grade enclosure with durable textured finish, protective grille, link-through speaker connectors and manufacturer-approved wall/ceiling mounting accessories. The unit shall be supplied with connectors, brackets, safety provision and all required installation hardware.

Speaker Supply, installation, testing and commissioning of professional 18-inch passive infra-subwoofer suitable for museum AV playback, immersive sound, auditoriums, performance spaces, theme parks, cafés and low-frequency reinforcement applications. The subwoofer shall have minimum 1 × 18-inch high-excursion LF driver with 4-inch voice coil, 8 Ω impedance, sensitivity of minimum 99 dB, and maximum continuous SPL of minimum 131 dB. It shall have minimum 1500 W AES continuous / 3000 W program / 6000 W peak power handling with frequency range of 23 Hz–200 Hz (-10 dB) or better. The enclosure shall be made of minimum 18 mm multi-ply plywood with durable polyurea coating and powder-coated perforated steel grille with acoustic foam backing. The subwoofer shall include high-current speaker terminals with link-through connection and manufacturer-approved rigging / mounting provision, including M10 mounting points. The unit shall be supplied with connectors, mounting accessories and all required hardware for complete installation.

Speaker Supply, installation, testing and commissioning of compact performance two-way coaxial loudspeaker suitable for indoor/outdoor background music, foreground audio, museum galleries, cafés, corridors, retail spaces and distributed AV applications. The loudspeaker shall have minimum 5.25-inch LF driver with 1-inch soft dome HF tweeter, 8 Ω / 16 Ω impedance option, frequency range of 50 Hz–20 kHz, sensitivity of minimum 89 dB, and maximum SPL of minimum 110 dB. The speaker shall have minimum 60 W AES / 120 W program / 240 W peak power handling with wide 160° conical coverage. It shall have high-grade aluminium construction with weather-resistant grille, IP55 rating, and shall be suitable for wall, ceiling, pole or stand mounting with manufacturer-approved mounting accessories. The speaker shall support optional 70V / 100V transformer module where required and shall be supplied with bracket, connectors, safety provision and all installation hardware.

Speaker Supply, installation, testing and commissioning of high-performance 8-inch two-way passive loudspeaker suitable for museum AV playback, foreground music, immersive audio, cafés, multipurpose spaces and distributed sound applications. The loudspeaker shall have minimum 1 × 8-inch LF driver with HF compression driver, 8 Ω impedance, minimum 200 W AES continuous / 400 W program / 800 W peak power handling, sensitivity of minimum 95 dB, and maximum SPL of minimum 118 dB. Frequency response shall be 70 Hz–20 kHz ±3 dB or better, with extended frequency range up to 54 Hz–20 kHz (-10 dB). The loudspeaker shall have passive built-in crossover and 90° horizontal × 70° vertical rotatable horn coverage. It shall be supplied with suitable link-through speaker connectors, rugged installation-grade enclosure, protective grille, mounting bracket / suspension accessories and all required installation hardware. The speaker shall support optional 70V / 100V transformer operation where required.

Amplifier Supply, installation, testing and commissioning of professional quad-channel Class-D power amplifier suitable for high-power loudspeaker systems, museum AV playback, immersive audio, auditoriums, performance spaces and fixed/mobile sound applications. The amplifier shall provide minimum 4 × 1250 W output power at 4 Ω and shall support bridged operation up to 2 × 2500 W at 8 Ω as per loudspeaker load requirement. It shall include built-in WaveDynamics DSP / loudspeaker management with EQ, crossover, limiter, delay, routing, presets and system protection. The amplifier shall have balanced XLR and terminal-block inputs, Speakon-compatible and terminal-block speaker outputs, front LCD display, USB configuration and RS-232 control. It shall support optional Dante / AES67 expansion through suitable network audio interface module where required. The amplifier shall have 20 Hz–20 kHz frequency response, high-efficiency Class-D design, short-circuit / overload / thermal protection and rack-mount construction. The unit shall be supplied with power cable, connectors, rack mounting accessories, configuration and complete commissioning support.

Amplifier Supply, installation, testing and commissioning of professional quad-channel Class-D power amplifier suitable for high-power loudspeaker systems, museum AV playback, immersive audio, auditoriums, performance spaces and fixed/mobile sound applications. The amplifier shall provide minimum 4 × 1250 W output power at 4 Ω and shall support bridged operation up to 2 × 2500 W at 8 Ω as per loudspeaker load requirement. It shall include built-in WaveDynamics DSP / loudspeaker management with EQ, crossover, limiter, delay, routing, presets and system protection. The amplifier shall have balanced XLR and terminal-block inputs, Speakon-compatible and terminal-block speaker outputs, front LCD display, USB configuration and RS-232 control. It shall support optional Dante / AES67 expansion through suitable network audio interface module where required. The amplifier shall have 20 Hz–20 kHz frequency response, high-efficiency Class-D design, short-circuit / overload / thermal protection and rack-mount construction. The unit shall be supplied with power cable, connectors, rack mounting accessories, configuration and complete commissioning support.

Amplifier Supply, installation, testing and commissioning of professional dual-channel Class-D power amplifier suitable for foreground sound, museum AV playback, immersive audio, auditoriums, performance spaces and fixed/mobile sound applications. The amplifier shall provide minimum 2 × 750 W output power at 4 Ω and 2 × 380 W at 8 Ω, with bridge mode support up to 1500 W at 8 Ω. It shall include built-in WaveDynamics DSP / loudspeaker management with EQ, crossover/filtering, limiter, delay, routing, presets and system protection. The amplifier shall have balanced XLR and terminal-block inputs, Speakon-compatible and terminal-block speaker outputs, front LCD display, USB configuration and RS-232 control. It shall support optional Dante / AES67 network audio expansion through suitable interface module where required. The amplifier shall have 20 Hz–20 kHz frequency response, high-efficiency Class-D design, short-circuit / overload / thermal protection and rack-mount construction. The unit shall be supplied with power cable, connectors, rack mounting accessories, configuration and complete commissioning support.

DSP Supply, installation, testing and commissioning of professional 1U modular open-architecture DSP processor suitable for museum AV, conferencing, paging, multi-zone routing, background music and networked audio applications. The processor shall support 16 modular I/O card slots for flexible configuration of analog inputs/outputs, USB, GPIO, relay control, AES/EBU and other required audio/control interfaces. It shall provide high-quality DSP processing with matrix mixing, EQ, crossover, delay, dynamics, limiter, automixer, routing, presets and control logic. The unit shall support Dante network audio up to 64 × 64 channels through suitable Dante configuration/module as required. It shall support Ethernet-based configuration, monitoring and third-party control integration through manufacturer software. The DSP shall be rack-mountable and supplied with required I/O cards, connectors, power cable, software programming, configuration and commissioning support.

Speaker Supply, installation, testing and commissioning of high-performance 12-inch two-way active loudspeaker suitable for museum AV playback, immersive audio, foreground music, auditoriums, cafés, multipurpose spaces and high-SPL distributed sound applications. The loudspeaker shall have minimum 1 × 12-inch LF driver with HF compression driver, integrated amplifier and advanced DSP / loudspeaker management. It shall have frequency response of 58 Hz–20 kHz or better, maximum SPL of minimum 125 dB, and 90° horizontal × 70° vertical rotatable horn coverage. The loudspeaker shall provide minimum 400 W RMS / 800 W program / 1600 W peak performance class, with Ethernet/ network control, USB configuration, and Dante / AES67 expansion port as applicable. It shall support wall/ceiling mounting, horizontal or vertical installation, and shall have rugged installation-grade enclosure with protective grille and durable textured finish. The unit shall be supplied with power cable, connectors, mounting bracket/suspension accessories, configuration and complete commissioning support.

Mic Supply, installation, testing and commissioning of professional 18-inch gooseneck condenser microphone suitable for podium, lectern, conference table, auditorium, control desk and public speaking applications. The microphone shall have supercardioid polar pattern, interchangeable cartridge design, low-profile dual-flex gooseneck and integrated preamplifier with balanced output. It shall have frequency response of 50 Hz–17 kHz, output impedance of around 180 Ω, maximum SPL of minimum 123 dB, and shall operate on 11–52 V phantom power. The microphone shall include mute switch with LED indicator, shock mount, locking flange mount and foam windscreen for stable installation and reduced handling/vibration noise. The unit shall provide transformerless balanced output for improved rejection of electromagnetic hum and RF interference. It shall comply with applicable safety and regulatory standards such as CE / RoHS or equivalent and shall be supplied with required mounting accessories, connector and installation support.

Mic Supply, installation, testing and commissioning of professional low-profile supercardioid lavalier condenser microphone suitable for wireless bodypack use in presentation, lecture, guided tour, auditorium, conference and museum AV applications. The microphone shall have supercardioid polar pattern for focused voice pickup and rejection of ambient noise, with frequency response of 70 Hz–20 kHz or better. It shall have high dynamic range, low self-noise, maximum SPL of minimum 130 dB, and shall be optimized for clear speech reproduction. The microphone shall have TQG / TA4F 4-pin connector compatible with professional wireless bodypack transmitters and shall include minimum 1.2 m cable. The unit shall be supplied with tie clip, snap-fit foam windscreen, storage pouch and required accessories. It shall comply with applicable certifications such as CE / RoHS or equivalent.

Mic Supply, installation, testing and commissioning of professional digital wireless bodypack transmitter suitable for lavalier, headset or instrument microphone use in auditorium, museum AV, guided tour, presentation and live sound applications. The transmitter shall provide 24-bit digital audio transmission, frequency response of 20 Hz–20 kHz, dynamic range of minimum 118 dB, and operating range up to 100 m line-of-sight when used with compatible receiver. It shall have TA4M / TQG input connector, IR sync pairing with compatible receiver, OLED/display indication for frequency, battery and status, and durable bodypack housing with belt clip. The transmitter shall operate on 2 × AA batteries or compatible rechargeable lithium-ion battery, with operating time up to 8 hours. It shall comply with applicable certifications such as CE / FCC / RoHS or equivalent and shall be supplied with required antenna, belt clip, batteries and accessories.

Mic Supply, installation, testing and commissioning of professional coaxial RF antenna cable suitable for wireless microphone antenna extension and remote antenna mounting applications. The cable shall be 100 ft / 30 m length with BNC-to-BNC connectors and shall be suitable for use between professional wireless receivers, antenna distribution systems and remote antennas. The cable shall be 50-ohm coaxial type, preferably RG213/U low-loss type or equivalent, suitable for UHF wireless microphone systems. It shall provide reliable RF signal transmission with proper shielding and low-loss performance for professional AV, auditorium, conference and museum applications. The cable shall be factory-terminated, durable, flexible and suitable for fixed installation routing through rack, ceiling or AV equipment areas. It shall be supplied with required connectors, labelling and installation support.

Mic Stand Supply, installation, testing and commissioning of professional microphone stands suitable for stage, auditorium, conference, podium, museum AV and live sound applications. The stand shall be heavy-duty metal construction with stable weighted/tripod base and adjustable height mechanism. It shall support handheld, wired/wireless and condenser microphones with standard microphone clip/thread adaptor. The stand shall have smooth height adjustment, locking knob/clutch mechanism and anti-slip base/feet for stable operation. Boom-arm type stand shall be provided wherever required for flexible microphone positioning. The stand shall be powder-coated/black finished, durable for repeated professional use and supplied with microphone clip, thread adaptor and all required accessories.

Mic Cable Supply, installation, testing and commissioning of professional 4-channel microphone audio snake cable suitable for stage, auditorium, conference, museum AV, live sound and fixed audio installation applications. The snake cable shall have minimum 4 balanced microphone/audio channels with XLR female inputs at stage/field box end and XLR male outputs or suitable breakout connectors at mixer/rack end. The cable shall be made of high-quality shielded multicore audio cable for low-noise balanced signal transmission and protection from RF/EMI interference. The stage box shall have rugged metal construction with clearly marked channel numbers and strain relief for cable protection. Cable length shall be as per site requirement, preferably 15 m / 30 m / 50 m as approved in BOQ. The unit shall be supplied with all required connectors, protective sleeve, labelling and installation accessories for complete working condition.

Speaker cable Supply, laying, testing and commissioning of professional 2-core loudspeaker cable suitable for fixed AV, auditorium, museum, background music and distributed speaker installation. The cable shall have 2 × 2.5 sq.mm conductors, equivalent to approximately 13 AWG, with stranded copper-clad aluminium conductor construction and flexible PVC outer jacket. The cable shall be suitable for low-impedance and 70V/100V speaker line wiring, with conductor resistance not more than 1.12 Ω / 100 m and rated voltage of 300 V. It shall have colour-coded polarity identification, parallel/ separable core construction and metre marking for easy installation. The cable shall comply with RoHS / REACH and flame-retardant requirement as per EN 60332-1-2, CPR Euroclass Eca. The cable shall be supplied in 300 m roll or required length, properly dressed, labelled, terminated and tested after installation.

Mic Cable Supply, laying, testing and commissioning of professional-grade balanced microphone cable suitable for stage, auditorium, conference, museum AV, live sound and fixed audio installation applications. The cable shall be 2-core shielded audio cable with high-purity copper / oxygen-free copper conductors for low-noise signal transmission. It shall have suitable conductor size, preferably 22 AWG to 24 AWG, with flexible PVC outer jacket and durable insulation. The cable shall include high-density braided / spiral copper shielding for protection against EMI, RFI and handling noise. It shall be suitable for balanced mic-level and line-level audio signal transmission with XLR / TRS termination as per site requirement. The cable shall be flame-retardant, flexible, easy to route through conduit/rack/stage areas and suitable for professional AV installation. The cable shall be supplied with required connectors, ferruling, labelling, dressing, termination and testing for complete working condition.

Supply, laying, testing and commissioning of professional-grade structured LAN cable suitable for AV, IT, CCTV, control systems, digital signage, network audio, media servers and data communication applications. The cable shall be 4-pair twisted copper cable with solid bare copper conductors, suitable for Gigabit Ethernet / 10 Gigabit Ethernet applications as per cable category. CAT-6 cable shall support bandwidth up to 250 MHz, and CAT-6A cable shall support bandwidth up to 500 MHz. The cable shall comply with TIA/EIA / ISO / IEC structured cabling standards and shall support PoE / PoE+ / PoE++ as applicable. The outer jacket shall be PVC / LSZH / CMP / CMR type as per site and fire-safety requirement. The cable shall be supplied in approved colour, properly dressed through conduit/tray, labelled, terminated on patch panel / keystone jack / RJ45 connector and tested with LAN cable certification report.

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. ( Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished ).

Providing and laying Laminate wooden flooring (Grade AC3 or AC3+ laminates) 6 mm to 12 mm thick, having core made up of medium-density fiberboard (MDF),which is less resistant to impact damage and less resistant to being dented by heavy furniture, having a décor layer to give each floor its appearance and consisting of one or more sheets of paper impregnated with melamine resin and top wear layer having clear aluminum oxide finish that protects the decorative layer & imparts the desired level of sheen, from full gloss to low gloss, duly fixed to the base floor using adhesive as approved by the manufacturer

Auditorium Carpet Flooring Supplying and fixing heavy-duty auditorium carpet flooring of approved make and shade, minimum 6 mm to 8 mm thickness with fire-retardant properties, laid over prepared surface including approved adhesive, cutting, fitting, edge finishing, jointing, wastage, transportation, labour, tools & tackles, and all incidental charges complete as per approved design and direction of Engineer-in-Charge.

Audio Guide Content Development Designing, developing and supplying Audio Guide Content of total duration of 100 minutes in each language, namely Punjabi, Hindi and English, including research, content development, script writing, editing, translation, professional voice-over recording by reputed voice artists, studio recording, sound editing, mastering, synchronization and delivery in suitable digital formats for use with audio guide systems, complete as per approved content and directions of the Engineer-in-Charge. (100 Minutes each in Punjabi, Hindi and English)

Providing Interactive Audience Experience solution with Audio Guide Mobile Application with Beacon sensors, server system, content management system with local streaming server with QR based Enty on Andriod & iOS Mobile application , for museum including 05 years of Operation & Maintenance.

RECESSED HGW CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:

Wiring fan point (With fan box)

Wiring light point

Wiring 6Amp. wall socket point

Wiring 16/20Amp. power plug control point

Wiring light point without control switch.

Wiring light point with double control switches.

RECESSED AIR CONDITIONER SUPPLY TERMINAL POINT (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):

RECESSED COMPUTER SUPPLY TERMINAL POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):

Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16 Amp. switch with indicator and 1No. blanking plate (Modular accessories).

Wiring Computer terminal point having 2 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20 Amp. universal Socket (shuttered) and 2Nos. 16/20Amp. switch with indicator (Modular accessories).

Wiring Computer terminal point having 3 Nos. 6Amp. 2/3 universal socket (shuttered), 1No. 16/20 Amp. universal Socket (shuttered), 2Nos. 6/20Amp. switch with indicator and 2Nos. blanking plate (Modular accessories).

RECESSED TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES):

Supply and erection of TV socket, Telephone socket and Networking socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):-

Wiring TV socket point (one module)

Wiring Telephone socket point RJ11 (one module)

Wiring Networking socket point RJ45 (one module)

XLPE INSULATED ARMOURED CABLES (ON SURFACE):

Overall size 6sq.mm (2Core) Armoured (On Surface)

Overall size 16sq.mm (2Core) Armoured (On-Surface)

Overall size 25sq.mm (3½ Core) Armoured (On-Surface)

Overall size 35sq.mm (3½ Core) Armoured (On-Surface)

Overall size 50sq.mm (3½ Core) Armoured (On-Surface)

Overall size 120sq.mm (3½ Core) Armoured (On-Surface)

Overall size 185sq.mm (3½ Core) Armoured (On-Surface)

Overall size 240sq.mm (3½ Core) Armoured (On-Surface)

Overall size 300sq.mm (3½ Core) Armoured (On-Surface)

HEAVY GAUGE WELDED CONDUIT PIPES:

HGW Conduit Pipe 20mm dia. (1.6mm thick) On Surface

HGW Conduit Pipe 25mm dia. (1.6mm thick) On Surface

HGW Conduit Pipe 32mm dia. (1.6mm thick) On Surface

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:

PVC Flexible Pipe 20mm dia.

PVC Flexible Pipe 25mm dia.

G.I. EARTHING:

Earthing earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire 8 S.W.G. (4mm dia.). The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The rod shall be erected in ground upto complete length vertically:-

GI Earth rod 20 mm dia., 3 mtr. Long

GI Earth rod 20 mm dia., 4.5 mtr. Long

G.I. EARTHING WIRE/ROPE (AS ADDITIONAL LENGTH):

Metre

COPPER EARTHING:

COPPER EARTHING STRIP (As Additional Length):

Additional Length 20mm x 3mm thick Copper Tape

Additional Length 25mm x 3mm thick Copper Tape

SUPPLY AND ERECTION OF WIRING ACCESSORIES:

6/10amp. One Way Modular Switch (One Module)

6amp. 2/3 Universal Modular Shuttered Socket (two Module)

16/20amp. Universal Modular Shuttered Socket (two Module)

25amp. Universal Modular Shuttered Socket (two Module)

Step type Modular Electronic Fan Regulator 100watts (One Module)

Step type Modular Electronic Fan Regulator 100watts (Two Module)

Modular TV Socket (One Module)

Modular Telephone Socket (RJ-11) One Module

Modular RJ-45 Modem Jack for Computer (One Module)

Modular Blanking Plate (One Module)

Ceiling Rose (Flush Piano type)

Supply and erection of Modular Cover Frame (Complete set) on the existing metal box including fixing and connection of existing switches and sockets and other petty material etc:-

Modular Cover Frame One or Two Module

Modular Cover Frame Three Module

Modular Cover Frame Four Module

Modular Cover Frame Six Module

Modular Cover Frame Eight Module

Modular Cover Frame Twelve Module

MINIATURE CIRCUIT BREAKERS/RCBO's/ RCCB's:

MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Triple Pole 40amp. (10kA, Curve-C)

MCB Triple Pole 50, 63amp. (10kA, Curve-C)

RCBO's:

RCBO Double Pole 16/25amp., Sensitivity 30mA

RCBO Double Pole 32amp., Sensitivity 30mA

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:

TP&N Horizontal Double Door Distribution Board 8 way each

TP&N Horizontal Double Door Distribution Board 12 way each

Supply and erection of sheet metal double door vertical distribution boards IP 43-IK09 metal door (dust protected) as per IS:8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars for each phase, 2 Nos. shrouded neutral bars, 2Nos. earth bars, cement spill protector, color-coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting MCCB's as incomer and outgoings SP/TP miniature circuit breakers in the distribution board as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc.:-

TP&N Double Door Vertical DB's 8 way each (With provision of FP MCCB upto 125amp.)

TP&N Double Door Vertical DB's 12 way each (With provision of FP MCCB upto 125amp.)

Supply and erection of sheet metal Cable End Box (Make is same as MCB Distribution Board) mounting on the top or bottom of the MCB Distribution Board (Either Horizontal or Vertical) to keep loose wires & cables as per PWD General specifications including petty materials etc as required:-

Cable End Box for TPN 8 Way

Cable End Box for TPN 12 Way

Supply and erection of On Load Change over Switch with advance neutral UNIT in sheet enclosure on the existing surface. (Confirms to IS 13947 (Part-3). complete with G.I. Bolts, Nuts etc. according to the size of holes in the body of the enclosure & Connections on both sides of switch with suitable size of thimbles as per PWD General Specifications:-

On Load Change Over Switch Four Pole 200amp., 415volts (With Sheet Enclosure)

On Load Change Over Switch Four Pole 250amp., 415volts (With Sheet Enclosure)

On Load Change Over Switch Four Pole 320amp., 415volts (With Sheet Enclosure)

LT PANELS:

LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 8Nos. outgoing MCCB's 40amp. to 160amp. according to the requirement at site (Approx. size 1750 x 1750 x 400mm)

LT Panel enclosure having space for 1No. Incomer MCCB 400Amp. and 10Nos. outgoing MCCB's 40amp. to 160amp. according to the requirement at site (Approx. size 2025 x 1800 x 400mm)

LT Panel enclosure having space for 1No. Incomer MCCB 630Amp. and 6Nos. outgoing MCCB's 40amp. to 160amp. according to the requirement at site (Approx. size 1475 x 1800 x 400mm)

LT Panel enclosure having space for 1No. Incomer MCCB 630Amp. and 6Nos. outgoing MCCB's 40amp. to 250amp. (Option: MCCB 200-250amp.= 2Nos. and MCCB's 40-100amp.= 4Nos.) according to the requirement at site (Approx. size 1475 x 1800 x 400mm)

GI PIPE POLES & BRACKETS:

SINGLE ARM BRACKETS FOR GI PIPE POLE:

UPS SYSTEM

BATTERIES

Supply, installation, testing and commissioning of Linear LED lighting fixture of 28/36W complete with all necessary wall. Ceiling hanging arrangements as required.

Supply, installation, testing and commissioning of round/square 1x18W LED lighting fixture complete with all necessary wall/Ceiling hanging arrangements as required.

Supply, installation, testing and commissioning of wall mounted lighting fixture 8 -16W LED lighting fixture complete with all necessary arrangements as required.

Supply, installation, testing and commissioning IP 56 rated of wall mounted bulk gead light with protection ring over glass, 8W LED lighting fixture complete with all necessary arrangements as required.

Supply, installation, testing and commissioning IP56 rated of floor mounted light (floor light), 3-6W LED lighting fixture complete with all necessary arrangements as required.

Supply, installation, testing and commissioning hanging track light with 8 nos, 12-18 wall spot fixtures, adjustable with all angles as required, complete with all necessary arrangements of fixing on celilng as well as wall hanging as required. (3 Mtr Length)

Supply, installation, testing and commissioning hanging track light with 8 nos, 12-18 wall spot fixtures, adjustable with all angles as required, complete with all necessary arrangements of fixing on celilng as well as wall hanging as required. (2 Mtr Length)

Supply, installation, testing and commissioning of linear LED strip lighting fixtures of 5Watt/mtr, complete with cascade enclouser and fixing arrangement as required.

Addressable Fire Alarm Panel

Supplying, installation, testing & commissioning of fire alarm management system to centrally monitor and operate the fire alarm system complete as required.

Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed preature thermistor complete with base as required.

Supplying, installation, testing & commissioning of addressable fire control module complete as required.

Supplying, installation, testing & commissioning of addressable beam detector with short circuit isolator (inbuilt or seperate) complete with emitter and receiver including connections with remote test features etc complete as required.

Supplying, installation, testing & commissioning of intelligent addressable duct detector including suitable Photo detector complete with base as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of fire fighter telephone handset complete as required.

Supplying, installation, testing & commissioning of fire fighter phone jack complete as required.

Supplying, installation, testing & commissioning of 10 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms operating at 240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.

Supply, installation, testing and commissioning of 25 mm Outer dia CPVC PIPE with end caps including making air sampling opening of appropriate dia on appropriate interval and all accessories as required,(rate for area protected in sqm)

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

speaker cable Single pair, 2-core, 1.5 sqmm

Supply, Installation, testing, commissioning of Flap barrier or tripod turnstile of size approximately 1000(Length) x 300(Width) x 980(Height) mm, with pass rate 20 to 25 person/minute. Made up of stainless steel, Laser cut technology, bi-directional, RFID Video Panel, with the provision to make it either side free movement, compatible with all other RFIDs and access control system, Interactable with existing tripods or turnstiles etc. Shall be complete in all respect as required by site engineer.

PART- 1 : VRF SYSTEM

225 HP (For Museum)

75 HP (For Library)

40 HP (For Caffeteria)

40 HP (For Caffeteria)

110 HP (For Bhakti Movement)

200 HP (For Auditorium)

25 HP (ForLobby & Ticket Centre)

30 HP (For 7D Theatre)

30 HP (For Ahu service Area)

Supply,Installation, Testing and Commissioning of Master Remote Control panel including all necessary control wiring. Master Remote Control Panel shall be connected to all indoor/outdoor units. Master Remote Control Panel shall be one Touch Screen Type.

Supply Instalaltion, testing and commissioning of Refnet (Y-joints).

Comprehensive Annual Maintenance contract for VRF System with BMS System including Energy monitoring & Central Remote Control for Suitable for.(775 HP Approx.)

Refrigerant R-410A to top up the system if required.

AHU FLOOR & CEILING MOUNTED AHU'S

F / M AHU / 18500 CFM with 6 row deep cooling coil, SP 50mmWG With (For Museum)

C/S AHU / 6000 CFM with 6 row deep cooling coil, SP 50mmWG With (For Library)

C / S AHU / 6000 CFM with 6 row deep cooling coil, SP 50mmWG With (For Caffeteria)

C / S AHU / 6000 CFM with 6 row deep cooling coil, SP 50mmWG With (For Caffeteria)

F / M AHU / 18000 CFM with 6 row deep cooling coil, SP 50mmWG With (For Bhakti Movement)

F / M AHU / 20500 CFM with 6 row deep cooling coil, SP 50mmWG With (For Auditorium)

C/S AHU / 7500 CFM with 6 row deep cooling coil, SP 50mmWG With (ForLobby & Ticket Centre)

C/S AHU / 8500 CFM with 6 row deep cooling coil, SP 50mmWG With (For 7D Theatre)

C/S AHU / 8500 CFM with 6 row deep cooling coil, SP 50mmWG With (For Ahu service Area)

Bi-Polar & Advance NANO Filter

F / M AHU / 18500 CFM with 6 row deep cooling coil, SP 50mmWG With (For Museum)

C/S AHU / 6000 CFM with 6 row deep cooling coil, SP 50mmWG With (For Library)

C / S AHU / 6000 CFM with 6 row deep cooling coil, SP 50mmWG With (For Caffeteria)

C / S AHU / 6000 CFM with 6 row deep cooling coil, SP 50mmWG With (For Caffeteria)

F / M AHU / 18000 CFM with 6 row deep cooling coil, SP 50mmWG With (For Bhakti Movement)

F / M AHU / 20500 CFM with 6 row deep cooling coil, SP 50mmWG With (For Auditorium)

C/S AHU / 7500 CFM with 6 row deep cooling coil, SP 50mmWG With (ForLobby & Ticket Centre)

C/S AHU / 8500 CFM with 6 row deep cooling coil, SP 50mmWG With (For 7D Theatre)

C/S AHU / 8500 CFM with 6 row deep cooling coil, SP 50mmWG With (For Ahu service Area)

GSS Ducting

Rectangular / Square Ducting (Site fabrication)

Supply, installation, testing & commissioning of multi blade,aerofoil design blade, motorised combined fire & smoke dampers with spring return. The damper shall be of atleast 120 minutes 250 deg C fire rating. The motorized combined fire & smoke damper shall be UL listed as per latest UL 555'S' leakage Class-1. The damper shall be constructed out of 14G GI galvanised sheet steel blades of aerofoil design with seal and double skin and 16G GI frame. It shall be complete with control panel, actuator, sensor and inter-locking / wiring / connection. Dampers shall be as per approved shop drawings. The damper actuator shall be BMS Compatible. The actuator shall provide open and close feedback to BMS System.Fire damper shall be with an extended sleeve.(Final Qty. As Per Shop drawing).

Fire damper

Actuators

Supply, Installation and Testing of GI Volume Control Dampers having 18 Gauge GI frame & 20 Gauge Louver within ducts complete with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of air distribution system. Prior approval for blade depth to be taken before manufacturing clearance. The quantity specified in BOQ is as per actual size usages in drawing(Final Qty. As Per Shop drawing).

Supply,installation & testing of multiblade type louver damper constructed put of black coloured galvanised steel sheet,provided with suitable links,levers & quadrants for manual control of volume of air flow and for proper balancing of air distribution as per approved shop drawings, specifications & physical sample.Frame & blades shall be made out of min. 20 G & 22 G respectively. (Collar Damper)

Supply, installation, testing & commissioning of Powder coated Aluminium extruded grilles for Return air normal flow, 0° / 15° deflection one way as per specification & the sizes will be as per tender drawing mention: (Without damper)

Supplying & fixing of 18 G thick Aluminium extruded powder coated Fresh / Exhaust air weather protected louvers with bird screen type i.e. louvers blade shall be at 45° inclination with blade pitch 40mm (with Aluminium frames if required) for ventilation with 12G GI wire mesh. as per specification and sizes will be as per tender drawing mentioned.

Supply, installation, testing & commissioning of Fire rated flexible double canvass fan outlet connections with suitable flanges on both the faces. The canvas connection shall have circular flange on the fan side & square flange of the same size as of fan dia on the other side. Flanges shall be heavy duty 'MS' with nuts & bolts & fire retardant sealing / gasketing.

Supply and fixing of FR, Class O, Flex Acetate, Tri-dimensional Closed Cell Flex Acetate thermal insulation material on Ducts with Suitable rubber based Adhesive SR505 or Equivalent. Volume percentage of Closed Cell not less than 90%.The Nominal Density of Material Should be 28±3 kg/m³, having a thermal conductivity of 0.029 w/m°k at 40°C. The material shall conform to BS 476 parts 6, in a manner to be classified as ‘Class O’ , also shall also satisfy the criteria of Toxicity as per IMO 2010 FTP Code Part 2, Material shall pass flexibility test as per IS 12657:1989 and should be Anti fungal as per ASTM G 21.material shall also pass Ageing test as per ASTM C 177. Material shall be supplied with factory laminated vapour barrier as aluminium foil on one side. Water Vapour resistance factor should be more than 18000 as per BS EN 12086.Proper Installation procedure to be followed as per guidelines of Insulation material manufacturer

19 mm thick FR Class O , Closed Cell Flex Acetate Foam with Factory Aluminium foil Laminated for Supply air Duct

13mm thick FR Class O , Closed Cell Flex Acetate Foam with Factory Aluminium foil Laminated for Supply air Duct

Supply and fixing of FR Class O Open Cell XLPE Flex Fusion Acetate insude the Duct liner for first Plenum area , having NRC not less than 0.65 in 15mm thickness as per ASTM C423/ ISO:354/ IS: 8225. Material Should be Anti fungal and have thermal conductivity not more than 0.29 w/m°k at 40°C,Suitable rubber based adhesive to be apply on inner side of duct as well as on insulation material ( Closed cell side) material uniformily ensuring no air gaps.Proper Installation procedure to be followed as per guidelines of Insulation material supplier.

All refrigerant piping shall be constructed from soft seamless upto 19.1mm and hard drawn copper refrigerant pipes for above 19.1mm with copper fittings and silver soldered joints

41.3 mm O.D.(insulation : 19 mm)

34.9 mm O.D.(insulation : 19 mm)

28.6 mm O.D.(insulation : 19 mm)

22.2 mm O.D.(insulation : 19 mm)

19.1 mm O.D.(insulation : 19 mm)

15.9 mm O.D.(insulation : 19 mm)

12.7 mm O.D.(insulation : 19 mm)

9.5 mm O.D.(insulation : 13 mm)

6.4 mm O.D.(insulation : 13 mm)

Drain Piping

40 mm dia

32 mm dia

25 mm dia