NIT NO. 240/Durg(Durg)/2026

NIT SCHEDULE FOR REPAIR AND RENOVATION WORK IN U.P.U. GOVT. POLYTECHNIC DURG (C.G) .

P.A.C. 12.42 Lacs

S. No. C.S.R. I.No /P.No Particulars Quantity Unit Rate Amount 2.5 2.5 2.5 2.42 2.5

1 16.36 Dismantling terrazzo or mosaic or glazed vitreous or patent cement or tiled flooring or dado skirting of any thickness without sub base. 83.88 Sqm 22.50 188700 83.88 83.88

2 16.37 Dismantling lime/ cement plaster or skirting at any height raking out joints and cleaning the surface for plaster including disposal of rubbish within 50 metres lead. 106.01 sqm 11.00 116600 59.76 46.32 106.08

3 16.2 Dismantling bricks laid flat or on edge (each layer), or cement concrete tiles in flooring or over roofs in cement/lime mortar including stacking of serviceable material and disposal of unserviceable material within 50 metre lead. 325.00 sqm 22.50 731300 145.7 64.95 114.3 324.95

4 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:In Cement Mortar 1:6(1 cement : 6 fine sand) 68.28 sqm 107.00 7306.00 48.36 19.92 68.28

5 11.1.2 Providing and making 6mm thick cement plaster of mix:In Cement mortar 1:4 (1 cement : 4 fine sand) 26.40 sqm 87.00 2297.00 26.4 26.4

6 12.9.2 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete.Size above 300x300mm 3.60 Sqm 728.00 2621 1.8 1.8 3.6

7 12.7 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. 23.22 Sqm 646.00 15000 11.61 11.61 23.22

8 9.23.2 Providing and fixing frosted glass panes with steel glazing clips and special metal sash putty of approved make in steel doors, windows,ventilators: 5 MM THK 62.64 m2 717.00 44913.00 31.32 31.32 62.64

9 16.51 Dismantling C.I. or asbestos rain water pipes with fittings & clamps including stacking the material within 50 metre lead 0

10 16.53 Removing following vitreous china sanitorywares carefully for re-use including stacking within 50 metres lead. 0

I 16.53.3 European/ Anglo Indian WC pan of all sizes 24.00 Each 46.00 1104.00 12 12 24

11 18.1.3 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Orissa pattern W.C. pan of size 580x440 mm 2.00 Each 2899.0 5798.00 1 1 2

12 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : 0

13 19.7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 0

II 19.7.3 25 mm dia. nominal bore 70.00 Mtr 258.00 18060.00 50 20 70

III 19.7.5 40 mm dia. nominal bore 100.00 Mtr 364.00 36400.00 100 100

14 19.10 Making connection of G.I. distribution branch in G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete: (dia of main line to be measured) 0

15 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 16.00 Each 51.00 816.00 16 16

16 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 0

I 19.16.1 25 mm nominal bore 4.00 Each 436.00 1744.00 4 4

II 19.16.3 40 mm nominal bore 4.00 Each 596.00 2384.00 4 4

17 19.19 Providing and fixing gun metal non- return valve (vertical type) of approved quality (screwed end) : 0

I 19.19.1 25 mm nominal bore 3.00 Each 451.00 1353.00 3 3

II 19.19.3 40 mm nominal bore 3.00 Each 753.00 2259.00 3 3

18 19.43 Cutting holes more than 20x20 cm and upto 30x30 cm in walls including making good the same : 4.00 Each 125.00 500.00 4 4

19 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 1000.00 Each 7.30 7300.00 1000 1000

20 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 0

I 18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90° 0

II 18.77.3 Vent Covel 0

IV 18.77.5 "P" trap 110mmx110mm long 6.00 Each 227.00 1362.00 6 6

21 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:: 0

19.14.4 Piller Cock (400 grams) 8.00 Each 398.00 3184.00 8 8

22 3.1.3 Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). 34.98 Cum 2970.00 103891.00 14.57 6.5 11.43 2.48 34.98

23 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size) 31.05 Cum 4163.00 129261.00 9.32 21.73 31.05

24 3.12.2 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:Thermo-Mechanically treated bars FE 500D 2888.00 kg 54.50 157396.00 932.48 1955.7 2888.18

25 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. 48.27 sqm 371.00 17908.00 12.99 22.86 12.42 48.27

26 12.36.2 Chequered terrazzo tiles 22 mm thick with graded marble chips of size upto 6mm in floors on 25mm thick bed of cement mortar 1:6 (1 cement : 6 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles including grinding rubbing and polishing complete.Medium shade using approximately. 50% white cement and 50% ordinary cement 30.78 sqm 713.00 21946.00 15.39 15.39 30.78

27 14.71 (A) Providing and applying satin/matt finish Enamel paint minimum 2 coats in all surface applying @0.75 lit/10 sqm up to required finish as per relevent I.S. Code 2932:2013 of (product such as Asian satin Enamel,Dulux promise Premium Enamel,Nerolac Synthativ Enamel, opus prime enamel) inclusive of providing abro tape on edge and article and cleaning of dooir,windows,floor and surface as rqd with all tools tackle and labour etc. complete for the work.Satin synthetic enamel paint 46.32 sqm 133.00 6161.00 46.32 46.32

28 12.76.1 Providing and flaying Glazed Vitrified Floor Tiles (GVT/PGVT) with digital print of random Design with water absorption less than 0.05% and confirming to Is:15622-2017 of First quality of approved make in all colours, shades and size mantion below (+/-10mm) laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Course Sand) including grouting the joint with white cement and matching pigments etc complete.Size 600x600 mm Thickness 9 to 10 mm 338.87 sqm 964.00 326671.00 103.78 54.52 96.69 83.88 338.87

29 16.43 Demolishing cement concrete including disposal of material within 50 metre lead.1:3:6 or richer mix 2.48 cum 549.00 1362.00 2.48 2.48

30 16.1 Dismantling rammed moorum and boulders or rammed moorum and silt in foundation or under floor including all lead and lifts. 112.68 cum 279.00 31438.00 29.14 34.35 34.29 14.9 112.68

31 11.2.4 Providing and making 12mm thick cement plaster of mix:In Cement Mortar 1:4 (1 cement : 4 fine sand) 59.04 sqm 103.00 6081.00 59.04 59.04

32 18.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Long pattern W.C. pan of size 580 mm 6.00 Each 2459.00 1475400 6 6

33 18.8.1 Providing and fixing vitreous china 10 litre (full flush) capacity controlled flush low level cistern with all fittings complete.White 6.00 each 1334.00 800400 6 6

34 18.13 Providing and fixing white vitreous china urinal basin with waste fitting as per IS : 2556, and other couplings in C.P. brass complete: 0

18.13.1 Flat back half stall urinal of size 460x380x250mm 6.00 each 1776.00 1065600 6 6

35 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : 0

36 18.25 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 0

37 18.26 Providing and fixing PVC waste coupling in wash basin/ sink. 0

38 18.27 Providing and fixing cast iron grating for gully trap. 0

39 18.28 Providing and fixing in position 25mm diameter mosquito proof coupling of approved municipal design. 6.00 each 41.00 24600 6 6

40 18.35 Providing and fixing sand cast iron S&S plain bend of required degree as per IS : 1729: 0

41 18.47 Providing and fixing sand cast iron S&S double unequal plain invert branch of required degree as per IS : 1729: 0

42 18.52 Providing and fixing sand cast iron S&S collar as per IS: 1729: 0

43 18.55 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 0

44 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 0

45 18.77 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 0

18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90° 0 0

18.77.3 Vent covel 0

III 18.77.6 Nahani trap 110x75mm 6.00 each 90.50 54300 6 6

46 19.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints completeas per direction of Engineer in Charge. EXTERNAL WORK 0

I 19.6.1 15 mm nominal outer dia pipes 35.00 metre 91.50 320300 35 35

II 19.6.2 20 mm nominal outer dia pipes 55.00 metre 121.00 665500 55 55

III 19.6.3 25 mm nominal outer dia pipes 25.00 metre 165.00 412500 25 25

47 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: 0

iii 19.14.6 Stop cock (concealed) (600 grams) 4.00 each 494.00 197600 4 4

iv 19.14.7 Angle valve for basin mixer and geyser points (450 grams) 6.00 each 382.00 229200 6 6

v 19.14.8 Basin mixer pillar tap with spout (1000 grams) 6.00 each 1248.00 748800 6 6

vi 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 6.00 each 51.00 30600 6 6

48 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 0

I 19.16.1 25 mm nominal bore 2.00 each 436.00 87200 2 2

II 19.16.2 32 mm nominal bore. 2.00 each 510.00 102000 2 2

49 19.17 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 0

I 19.17.1 15 mm nominal bore 2.00 each 284.00 56800 2 2

II 19.17.2 20 mm nominal bore 2.00 each 394.00 78800 2 2

50 19.48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : 4.00 each 4644.00 1857600 4 4

51 8.13.2 Providing and fixing flush door shutters, conforming to IS 2202 (Part 1), interior grade, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains, cross bands and face veneers on both faces of shutters excluding hinges.35 mm. thick (single leaf) 5.04 sqm 1370.00 690500 2.52 2.52 5.04

52 8.15 Extra for double leaf shutter instead of single leaf. 5.04 sqm 52.00 26200 2.52 2.52 5.04

53 8.137 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 0

54 8.138 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 0

55 8.139 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 0

56 8.140 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 0

57 8.143 Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. 0

58 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. 20.40 M 346.00 7058.00 10.2 10.2 20.4

59 8.152 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). 3.60 SQM 2318.00 8345.00 1.8 1.8 3.6

60 8.126.2 Providing and fixing powder coated aluminium sliding door bolts with 16mm rod, necessary M.S. nuts bolts and screws etc complete.250x16mm 3.60 each 150.00 540.00 1.8 1.8 3.6

61 8.127 Providing and fixing powder coated aluminium door latch with 12mm rod, necessary M.S. nuts bolts and screws etc complete.250x12mm 3.60 each 54.50 196.00 1.8 1.8 3.6

62 4.13.1 Grading roof for water proofing treatment with:Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 10.04 cum 3817.00 38323.00 5.04 5 10.04

63 2.1.8 Beams, lintels, cantilevers & walls 41.58 sqm 202.00 8399.00 41.58 41.58

64 2.1.4 Edge of slab, breaks in floor and walls upto 200mm. 61.80 Rm 34.00 2101.00 61.8 61.8

66 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) 145.11 sqm 235.00 34101.00 145.11 145.11

Sub Engineer Sub Divisional Officer Executive Engineer

P.W.D. Sub Division No.1 Durg (C.G.) P.W.D. Durg Division Durg (C.G.)