C/O Link road from Dhaned to Talasi via Shiv Nagri Km. 0/00 to 5/205

Excavation for roadway in hilly area in all height and depth and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiseling, wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the required lines grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by the Engineer-In-Charge at site according to the MORD technical specifications section 300 clause 1602 and 1603 and sorting out useful material and stacking the same within all leads and lifts in acquired width of road and transportation of un-useful material for filling in roadway, camber, embankment for grade improvement and disposal of all surplus material to the approved dumping sites through all mode of transportation including head load or animal transport or mechanical means along with its leveling fine dressing including carriage of machineries, material, tools, equipments and safety measures and others incidentals necessary to complete the work by mechanical means/labour it required and nothing extra shall be paid on this account. All useful material such as stones, shingles, aggregate and slates etcetera shall by sorted out and stacked in proper stacks. The carriage of excavated earth and nothing extra shall be paid on this account. Recovery of useful stones to the tune of 1214.31 cum (One thousand two hundred fourteen point three one cubic metre) at the rate of Rs. 300/- cum (Rupees Three hundred per cubic metre) shall be effected from the contractor’s running bill or on pro-rata basis as per actual quantity executed. Any loss to the public, private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases. The removal of slips during the construction period shall be the responsibility of the contractor and nothing extra shall be paid on the account as per the direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earth work in excavation for all type of road, bridges foundation structure such as retaining wall, breast wall, wing wall, culverts, parapets and drain etcetera in all type of classification of soil, comprising of ordinary soil, hard rock, chiseling/wedging out rocks (Where blasting is prohibited) as per drawings and MORTHG 2014 technical specification 300 and as per direction of the Engineer-In-Charge including setting out. Construction of shoring and bracing, removal of stumps and other deleterious material and disposed upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (One hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering. The disposal of all surplus material to the approved dumping sites through all mode of transportation including head load or animal transport or mechanical means alongwith its leveling and nothing extra shall be paid on this account. Any loss to the public/private property during eh course of execution shall be the absolute responsibility of the contractor which shall have to the duly compensation by him in all cases as per the direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of embankment and shoulders with approved materials obtained from roadway cutting and excavation of drains and foundation of other structures, graded and compacted to meet requirement of Table 300.1 and 300.2 as per MORD technical specification clause 301.5 as per the direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure for all type of structure complete design mix M-25 ( M-twenty five ) with minimum cement contents not less than 404kg/cum (Four hundred four kilogramme per cubic metre) in bed blocks, dirt wall, main slab, wheel guard on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and MORD technical specification clause 800, 900 and 1200 as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete in open foundation, abutments and toe walls for all type of structures complete of plain cement concrete nominal mix M-15 ( M-fifteen) 20mm (Twenty millimetre) nominal size on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and MORD technical specification clause 800, 900 and 1200 as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain cement concrete in substructure Design Mix concrete Grade M-20 ( M-twenty) with minimum cement contents not less than 350 kg/cum (Three hundred fifty kilogramme per cubic metre) in or under water including curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time laying under water complete for all heights/depths including the cost of form work as per drawing and MORD technical specification clause 800,1205.4 and 1205.5 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (One cement : three coarse sand : six graded stone aggregate) 20 mm (Twenty millimetre) nominal size in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etcetera including the cost of centering, shuttering and finishing as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete of 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate for all works upto plinth level including the cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and MORD technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete for plain/reinforced concrete mechanically mixed and vibrated in open foundation, retaining walls, wing walls, parapets etcetera like structures complete as per drawings nominal mix 1:5:10 (One cement : five sand : Ten crushed graded stone aggregate) 40mm (Forty millimetre) nominal size including cost of form work and curing complete as per MORD technical specification Clause 800, 900 and 1200 complete in all respect including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Back filling behind abutment , wing walls and return walls complete as per drawings & MORD technical specification Clause 1204.3.8 granular material as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing weep holes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall, retaining wall with 110 mm (One hundred ten millimetre) dia PVC pipe of Supreme/Finolex/Vectus extending through the full with of the structures with slope of 1(v):20(H) (One vertical : Twenty Horizontal) towards drawing face complete as per drawing and MORD technical specification including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying of boulder apron laid in wire crates with 4mm (Four millimetre) dia G.I.wire conforming to IS:280 and IS:4826 in 100mmx100mm (One hundred into one hundred millimetre) mesh (woven diagonally) including 10% (Ten percent) extra for laps and joints laid with stone boulders weighting not less than 25kg (Twenty five ki

logramme) each as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals and MORD Technical Specification Clause 1301. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying 900mm (Nine hundred millimetre diametre) ( to level and slopes) reinforced cement concrete non pressure pipe I.S.I class NP-3 (Medium duty) for culverts on 1st class bedding of granular material in single row including collar with cement mortar 1:2 (One cement : two coarse sand) but excluding the cost of excavation protection work, back filling, concrete and masonry work in head walls and parapets as per drawing and MORD technical specification clause 1101 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying rubble stone flooring laid over cement bedding in cement mortar 1:3 (One cement three sand) complete as per drawing and MORD technical specification clause 1303 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete wearing course M-30 (M-Thirty) grade including reinforcement complete as per drawing and MORD technical specifications Clauses 800 and 1404 as per the direction of the Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of RCC railing of M-30 Grade (M-Thirty) in situ with 20mm (Twenty millimetre) nominal size aggregate true to line and grade, tolrence of vertical RCC post not to exceed 1 in 500 (One in five hundred) centre to centre spacing between vertical post not to exceed 2000mm (Two thousand millimetres), leaving adequate space between vertical post for expansion, compete as per approved drawings and MORD technical specifications as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying fitting and placing HYSD bar reinforcement in Super Structure including cost of bending, binding wire and cost for cutting and placing in position of bars complete as per drawing and MORD technical specifications section 1000 & 1200 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Drainage spouts complete as per drawing and MORD technical specification Clause 2705 as per drawing and Technical Specification including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of sub grade and earthen shoulder with approved materials obtained from borrow pits, with in all leads and lifts, transporting to site spreading grading to required slope and compacted to meet requirement of table 300.2 as per MORD technical specifications clause 303 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of granular sub-base by providing well graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site upto all leads and lifts and spreading in uniform layers with motor grader on prepared surface and compacting with smooth wheel roller to achieve the desired density, complete as per MORD Technical Specification Clause 401 for Grading-I materials per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) ( fifty three millimetres to zero point zero seven five millimetres ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne ( eight to ten tonne) capacity to achieve the desired density, complete as per specifications MORD technical specification Clause 406 and directions of Engineer-in-Charge including entire carriage of materials within all leads and lifts nd other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying evenly a priming coat with bitumen emulsion SS-1 on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 to 1.00kg/sqm (Zero point seven zero to one point zero kilograme per square metre) using mechanical means as per MORD technical specification clasue 502 including carriage of material within all leads and lifts as per direction of the Engineer-in-Charge. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying evenly a tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram) per square metre on prepared granular surface treated with primer and cleaned with hydraulic broom as per MORD technical specification clause 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 30mm (Thirty millimetre) thick bituminous concrete with 100-120 (One hundred to one hundred twenty tonne per Hour TPH batch type hot mix plant producing an average output of 75 tonnes (Seventy tonnes) per hour using crushed aggregates of specified grading, premixed with bituminous binder and filler specified material VG-30 (Viscosity Grade-Thirty) at the rate 5.5% (five point five percent) of mix prepared with addition of silane Nonotechology (ZycoTherm) at the rate of 2% ( two percent) by weight of bitumen and filler as per job mix formula, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 80mm (Eighty millimeter) heavy duty precast cement concrete interlocking paver blocks Grey and red 50% (Fifty percent) each manufactured by the help of hydro vibratory machine having compressive strength of M-40 (M-Forty) grade as per IS(I-15658-2006 NTC/Modern/Gico/Nitco ISI marked as approved by Engineer-In-Charge including border or kurb blocks grey or coloured. The paver shall be l

aid on 40mm (Forty millimeter) sand filling packed as per direction by Engineer-In-Charge including entire carriage of material with in all leads, lifts, drawings, MORD technical specifications Clause 1504 as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete M15 ( M-fifteen ) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcetera One Kilometre Stone ( Precast ) as per drawing and MORD Technical Specification Clause 1703 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete M15 ( M-fifteen ) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcetera 200 (Two hundred) metre Stone ( Precast ) as per drawing and MORD Technical Specification Clause 1703 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete M15 ( M-fifteen ) grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD Technical Specification Clause 1704 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing of typical NABARD informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm (One point six millimetre) thick, top and middle plate duly welded with MS flat iron( TATA/SAIL) 25mm x 5m (Twenty five millimetre into five metre) size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mmx5mm (Twenty five into twenty five into five millimetre). The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. (Two numbers)75mm x 75mm ( Seventi five millimetre into seventy five millimetre) of 12 (Twelve) SWG sheet tubes posts ( TATA/SAIL) duly embedded in cement concrete M-15 (M-fifteen) grade blocks of 450mm x 450mm x 600 mm, 600mm (Four hundred fifty into four hundred fifty into six hundred millimetre) below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm (Forty seven millimetre into forty seven millimetre) of 12 (Twelve) SWG steel plate tube. All M.S. will be stove embedded on both sides. Lettering and printing arrows, border etc. will be painted with readymixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and MORD technical specification Clause 1701 and Annexure 1700.1 as per approved drawing Clause 1701.2.2 including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing retro-reflectorised Traffic Signs 600mm (Six hundred millimetre) equilateral triangular of retro reflectorised cautionary, mandatory and informatory signs as per IRC 67 made of encapsulated lens type reflective sheeting wise Clause 1701.2.2 fixed over aluminum sheeting 1.5mm (One point five millimetre) thick supported on a mild steel angle iron (TATA/SAIL) post 75x75x6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M-15 (M-Fifteen) grade cement concrete 450x450x600x600mm (Four hundred fifty into four hundred fifty into six hundred into six hundred millimetre) below ground level as per drawings and technical specification Clause 801 including entire carriage of materials in all leads and lifts and as per drawings and MORD technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Routine maintenance for five years after completion of construction work as per item and condition of bid document of contract to general condtion of contract and technical specification of MoRD including haulage carriage of all labour transport and material to various location of site through all modes of transportations with in all leads lifts and other incidentals to entire satisfaction of Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Per Tonne

Per Square meter

1. Maintenace cost for 1st year = km 5.205 Rate = 109000 Total amont = 567345

2. Maintenance cost for 2nd year @ 5% on 1st year. = km 5.205 Rate = 114000 Total amont = 593370

3. Maintenance cost for 3rd year @ 5% on 2nd year. = km 5.205 Rate = 120000 Total amont = 624600 .