Different types of work against Additional Business Plan Scheme 2023-24 (Package No. 537, 538, 539, 540, 541, 542, 543, 544 and 545/CE/SI/Add.B.P./2023-24) in the area of Alambagh under jurisdiction of E.E., EUDD- Alambagh, LESA, Lucknow

Amount

Safe Loading, Carriage & unloading of following Materials from Centre Store to Pit Site/J.E. Dump Store.

(a) Line Material

(b) 11 KV 3x70/3x120/3x185 sqmm XLPE Cable

(c) TF 250 KVA

(d) TF 400 KVA

(e) TF 630 KVA

(f) ABC (3x120/1x95/1x16) sq.mm.

(g) 11 KV OD Jointing kit 3x70 sq.mm

(h) LT PVC 1x400 sq.mm.

(i) LT PVC 1x630 sq.mm.

(j) LT PVC 3.5x400 sq.mm.

(k) ST Pole 11 MTR Long

(l) PCC Pole 8.5 MTR Long

(m) Stay wire (3.15mm) 7/10 SWG (gas wire)

Dragging of ST/PCC Pole digging of pit erection of sub-station type double pole structure on ST Pole with fixing of necessary item such as Top Channel, along with grouting (As per RESPO Norms) Dropper Channel, 11 pin insulator with Pin & 11 KV Disc Insulator with fitting, DO Fuse set its ramming, as per RESPO Specification. Only Pole and insulator will be Provided by the Department.

Cable Hosting of 11 KV 3x70/3x120/3x185/ sq. mm XLPE Cable/LT PVC 3.5x400sqmm at the following including jumpering etc complete with help of GI Pipe as Per RESPO Norms. GI pipe and other required material shall be supplied by contractor.

Well type earthing of with 60 Fit Deep borring and providing GI Pipe 1.5" dia ("B" Class) and earthing must be joint by G.I. Strip of 32x5 mm thick long attached with nut & bolts and GI pipe cap. All material and labour shall be supplied the contractor.

Dragging of ST/PCC Pole to pit site, digging of pit erection and grouting (As per RESPO Norms) of 11 KV 11/8.5 Mtr Long ST/PCC Pole with, fixing of necessary item, such as V-type X-arm, F-bracket, 11 KV Pin insulator, Guarding angle (1.8 mm 65x65x6) with Nut & bolts its ramming as per RESSPO Specification. Only Pole and insulator will be Provided by the Department.

Construction of T/F plinth of size 2x2x1.2 mtr with the help first class brick & masonry in the ratio 1:4 cement & sand coarse. Filling the structure completely per norms with RCC to 1:2:2 cement & stone grit with MS bar and MS channel for resting transformer. All material and labour shall be supplied the contractor.

Wiremess fencing of 11/0.4 KV S/S shall be made of rectangular of size as per site requirement not exceeding 3 meter fabrication 45x45x5 mm angel the frame is also have 1 no. Horizontal runner of MS flat 40x5 welded in middle to support of wire mesh. Rectangular welded type wire mess of size 50x25 made of 12 S.W.G. wire mess shall be welded all along the periphery of the frame as well as on horizontal runner to give extra strength of welding to wire mess welded on the frame. Diagonal bracing of all the frame panel will be welded with Ms flat of size 25x3mm to support as per RESPO specification & direction of E/I.

(i) Outdoor/Indoor end termination Jointing kit for 11 KV 3x185/3x70 sqmm XLPE cable

Proper laying & commissioning of (3x120/1x95/1x16) XLPE Aerial Bunched Conductor. Only ABC Provided by deptt.

Fixing and laying of LT PVC Cable 1x400 sq.mm as per RESPO Norms Only Pvc cable provided by department.

Fixing and laying of LT PVC Cable 1x630 sq.mm as per RESPO Norms Only Pvc cable provided by department.

Fixing and laying of LT PVC Cable 3.5x400 sq.mm as per RESPO Norms Only Pvc cable provided by department.

Laying of 3X70/3x120/3x185 sq.mm 11 KV XLPE cable by manual method as per RESPO Norms. Only 11 KV XLPE cable supplied by Department.

Supply and fixing of copper L-piece for 250 KVA TF (62x225x12 MM) as per RESPO Norms

Supply and fixing of copper L-piece for 400 KVA TF (62x225x12 MM) as per RESPO Norms

Supply and fixing of copper L-piece for 630 KVA TF as per RESPO Norms

Supply and fixing of copper Alluminium Lug for 250 KVA TF (400 sqmm) as per RESPO Norms

Supply and fixing of copper Alluminium Lug for 400 KVA TF(400 sqmm) as per RESPO Norms

Supply and fixing of copper Alluminium Lug for 630 KVA TF as per RESPO Norms

Supply and fixing of 11KV Fuse Set as per RESPO Norms

Supply and fixing of LT Tailless Fuse unit 500 Amp as per RESPO Norms

Supply and fixing of Copper Bus Bar (1000x50x6) as per RESPO Norms

Supply and fixing of Alluminium Climpling lug for 400 KVA as per RESPO Norms

Supply and fixing of Hanley Type Tailless Fuse unit 300 Amp as per RESPO Norms

Supply and fixing of U Type S Contact 300 Amp as per RESPO Norms

Fabrication, errection & commissioning of 400 KVA T/F on Plinth with all accessories. All material except 400 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 250 KVA T/F on Plinth with all accessories. All material except 250 KVA T/F shall be supplied by the Contractor.

Fabrication, errection & commissioning of 630 KVA T/F on Plinth with all accessories. All material except 630 KVA T/F shall be supplied by the Contractor.

Dismantling of 250 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Dismantling of 400 KVA T/F opening jumbers, LT cable and Other accessories of T/F including Safe loading, unloading Carriage from site to JE dump Store/Center Store.

Supply and fixing of Danger board with clamp.

Other Mislenious Material.

G.S.T. Extra as per rules.

Sidhi Enterprises