Urgent Repairs, Renovation and Upgradation work of the reception area and dining area at Eco-tourism site at Bondla.

PVC insulated wall paneling : Providing & fixing Insulated PVC wall Paneling shall consist of PVC Insulated panels having wall thickness 2mm( ±0.25) PVC sheet of 700 Kg/CBM density manufactures by an ISo - 9000 certified company and the desireed thickness of EPS ( dependent on ther insulation required) screwed into the wall using screws of adequate length. The screw shall be placed at a distance of 150 mm and shall be 25 mm from the edge of insulated panel on all from side of the panel.

The PVC strips are 4 mm ( ±0.25) thick PVC sheet of width 75 mm feathered at the edges shall be stuck using solvent cement adhesive at the palces where two panels are joined ,so as to cover the screw of both the panels, using solvent cement 90 degree sheet heat bend strips of 4 mm thick PVC sheet of width 75 mm X 75 mm feathered at the edges shall be stuck at wall joints/ Pillars etc. complete as per the direction of engineer in charge, manufactures specification & drawing.

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with three sliding shutters using 18 mm series shutters section. b) Plain glass + Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and fixing anodised aluminium single or double leaf door shutters with heavy sections as specified.

PVC false ceiling grid type : Providing and fixing PVC False Ceiling consisting of 600mm x 600mm, 5mm(±0.25) thick Plain PVC sheet of 600 kg/Cbm Density Manufactured by an ISO-9000 certified Company, used as panel insert in a frame work made using anodized aluminum T- section of sizes 1” x1” (25x25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2’x2’(600x600mm). The aluminum frame work is supported from the ceiling with the help of 'J' hook and G.I. wire / 6mm M.S. rods of required sizes to maintain proper level etc. The aluminum framework is supported on side wall with the use of aluminum L-section of size 1”x1” (25x25mm) angles etc. Complete as per direction of Engineer-In-charge, manufacturer’s specification & drawing.

Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade.

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon. B) Second class Indian teak wood

Providing and fixing factory made panelled door shutter fabricated out of second class teak wood with styles top and middle rail, lock and bottom rail with Navopan or equivalent weather resistant melamine faced prelaminated twin particle board - bonded with BWP/BWR exterior grade synthetic resin as per IS - 3087 (1985) type I including anodised aluminium butt hinges with necessary screws etc. complete. f) 18 mm thick panel (iii) 30 mm thick