Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹45.8 LAccepted-AOC | L1 | Accepted-AOC SINCE L1 | |
| 2 | L2₹48.6 L+₹2.7 L (5.95%)Rejected-Finance FLAT NO 2 AMEYA APARTMENT SHIV COLONY NEAR PANDAV NAGARI INDIRA NAGAR NASHIK 422009 | NASHIK | NASHIK | MAHARASHTRA | 422009 | L2 | Rejected-Finance SINCE NOT L1 |
Tender Value
₹47 L
EMD Value
₹94,000
Closing Date
9 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DEOLALI
GE DEOLALI, 422401
PROVN OF CERTAIN SANCTIONED JOBS AND ARBORICULTURE WORK OF AGE B/R C UNDER THE AOR OF GE DEOLALI
2022_MES_523782_1
8086/E8
Open Tender
Civil Works
Item Rate
180 days
GE DEOLALI
CLASS D CAT a i
8 documents required · 8 mandatory
₹500
Yes
GE DEOLALI
₹94,000
Yes
21 Jul 2022
12 May 2022
11 Jun 2022
12 May 2022
9 Jun 2022
31 May 2022
60 days
Amount
Taking down cement plaster of any description, any thickness from surfaces of walls/soffits of roof projections & chajjas /ceilings etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed.
M&L for rendering 10mm thick in CM (1:6), on brick or concrete surfaces, trowelled to even and fair finish without using extra cement complete all as specified.
M&L for applying 3mm thick wall care putty on wall complete all as specified and as directed.
M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distempering over a coat of interior wall primer complete all as specified and directed.
M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed.
M&L for rendering 5mm thick in CM (1:3) as on concrete surfaces in ceiling finished even and smooth without using extra cement all as specified.
M&L for applying 1.5mm thick wall care putty on ceiling complete all as specified and as directed.
M&L for preparing new plastered or unplastered surfaces of ceiling, and applying two coats of white wash complete all as specified and directed.
M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @3.0 kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately)
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika
Supply only chicken wire mesh 22 gauge of size not less than 20X20mm all as specified & as directed by Engineer-in-Charge. Make : Swastik or equivalent as approved
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed by Engineer-in-Charge.
Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed.
M&L for Glazed ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 350mm x 7mm thick (coloured) of superior quality fixed on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry over 10mm thick backing coat in CM (1:4) and pointed in coloured cement to match complete all as specified and directed.
M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.18 but n exc 0.38 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
All as per Sl item No 16 above but in skirting over 10mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L for non skid ceramic tiles of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.11 but n exc 0.18 sqm, in floors, set & jointed in neat cement slurry and pointed in coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L for 30mm thick PCC 1:2:4 Type B1 with using 20mm graded stone aggregate as in levelling course in floor complete all as specified and directed.
M&L for Machine cut kota stone slab on steps in single piece of any size 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.
M&L for chequered cement concrete tiles 30cmx30cmx25mm thick Rubber moulded with grey cement and pigment, over and including 15mm thick screed in CM (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed.
Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
S&F 35mm thick flush shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed.
S&F 2nd class H.W. glazed & skeleton shutter 35mm thick factory made open rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed.
S&F powder coated anodised aluminium three track frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete as specified and as directed. Note:- Window shall be fixed as per three track frame TD drawings.
S&F powder coated aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings such as suitable handle 01 No., locking arangement 01 No. and roller bearings 02 Nos in each shutter etc complete all as specified. Note: Window shall be fixed as per three track frame TD drawings.
S&F powder coated aluminium ventilator shutters with frame not less than 0.60Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick glass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed.
M&L for 4mm thick sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.
M&L for 4mm thick sheet glass, ordinary quality and fixed with glazing clips, rubber packing in square in n exc 0.5 sq.m in each pane in each pane complete all as specified and as directed.
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed.
S&F PVC door frames of sizes 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and as directed.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with particle board core (stile:), with 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed.
M&L for PCC (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
S&F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified.
S&F 100mm long butt hinges medium weight cold rolled mild steel complete all as specified and as directed.
S&F aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and as directed.
S&F 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.
S&F 75mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150 mm size aluminium anodized handle complete all as specified and as directed.
M&L for 250mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
S&F mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed.
M&L for preparation of New or previously untreated wood and wood based surfaces of any description over 10cm in girth or width and painting with two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
S&F in repairs 25mm dia fancy stainless steel curtain rod with fancy fixing brackets, fancy stops/supports, rollers etc. complete all as specified.
S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete as fixed complete all as specified.
S&F in repairs PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed.
S&F in repairs wash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and as directed.
S&F in repairs 15mm bore two way mixing pillar/sink taps for mixing of hot/fresh water and cold water for WHB/Sink, chromium plated, fancy type with long screwed shanks complete all as specified and as directed.
S&F in repairs CP mixer for mixing (HOT/COLD) water , with wall cap of CP Brass, screwed down, screwd for iron pipes 15mm bore complete all as specified and directed.
S&F in repairs Brass chromium plated shower rose 125mm size complete all as specified and as directed.
S&F in repairs brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges.
S&F in repairs 15mm bore Bib taps chromium plated fancy type, cast copper, screwed down, screwed for iron pipe or for brass ferrule and fixed
S&F in repairs 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed..
S&F in repairs CP fancy type stop/angle valves, cast copper alloy, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and as directed.
Dismantling of water tanks (RCC hume Pipe/PVC) including disconnecting all connections etc. complete for following capacity of tanks 1000 ltrs
S&F new rotational moulded polythylene water storage tank (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tank for 1000 ltrs
Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed.
S&F 15mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
S&F 20mm boreTubes, `medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.
Fixing only 15mm bore tubes, any grade, to walls and ceilings or laying in floors
Fixing only 20mm bore tubes, any grade, to walls and ceilings or laying in floors
S&F in repairs 20mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
Dismantling of PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and as directed.
S&F 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed.
S&F 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.
S&F PVC (SWR) bend with access door any radius 110mm complete all as specified and directed.
S&F PVC (SWR) bend any radius 75mm complete all as specified and directed.
S&F PVC (SWR) bend any radius 110mm complete all as specified and directed.
S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.
S&F in repairs stainless steel soap dish, approximate size 130x120x30mm complete all as specified and as directed.
Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed.
S&F MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed.
Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams staircases, landing, chajjas, and similar suspended work.
Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc.
S&F in repairs 15mm bore Gun metal gate valves with iron wheel head screwd both ends for iron pipes complete all as specified and directed.
S&F in repairs Vitreous China Urinal, Half stall type, white, complete including providing and fixing plus, bedding urinal against wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement, including waste pipe complete all as specified and as directed.
Surface Excavation nexc 30cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and directed.
Excavating in trenches, n.exc 1.5m wide and n.exc. 1.5m in depth for foundation, etc. or for shaft, wells and cesspits in soft/loose soil all as directed.
Ditto all as per Item No 83 above but depth exc 1.50m and n.exc 3.0m in soft / loose soil all as specified and directed.
Returning, filling in soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm all as directed.
Removing excavated material n, exc 50m and depositing where directed at a level n exc 1.5m from the base.
Treating the bottom and sides of excavation at the rate of 5 litres of emulsion per sqm of surface area.
Treating the backfill in contact with foundation at the rate of 7.5 ltrs of emulsion per square meter of vertical surface (Area of the sub structure in contact with backfill to be measured)
M&L for hardcore of broken stone or boulders of guage n exc 63 mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surface.
M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc complete all as specified and directed.
M&L for RCC M-25 (Design Mix) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and as directed.
M&L RCC M-25 (Design Mix) in Concrete as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves all as specified and as directed.
M&L for RCC M-25 (Design Mix) in Beams, Cantilivers, bressummers, lintels over 1.5m span
M&L for M-25 (Design mix) in Columns, Pillars, Piers, Posts and Struts
M&L for fly ash brick work with old size sub class 'B' bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as directed.
M&L for fly ash brick sub class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls and built in CM 1:4 etc complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter etc complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; n. exc 200m thick (Horizontal or sloping) etc complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc complete all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor & roofs n exc 20 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide etc complete all as specified and directed.
S&F 2nd class hardwood 35mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed.
S&F Mild steel of conforming to Fe 290 grade E-165 as framed work (Angles ,Flat Iron, square/round bars) with ends of bars shouldred and/or rivetted or forged into spikes for window grills/framed guard bars to the design and pattern of ornamental and intricate as approved etc complete all as speciified and drected.
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed.
Ditto all as per sl.item no. 105 above but 6mm to 8mm dia complete all as specified and directed.
Ditto all as per sl.item no. 105 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed.
S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as directed.
M & L for cleaning the newly plastered surfaces of concrete ( roof etc) with wire brushes and applying water proofing treatment as under :- i) Apply Priming surfaces and applying normal treatment (for moderate conditions) using glass fibre base bitumen felt, grade 2 ii) Providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.0 Kg / Sqm reinforced with non woven polyester mat weighing not less than 150 gm/Sqm all as specified procured from any one of the approved manufacturer's instructions
M & L for applying two coat of aluminium paint @ 0.15 Kg/Sqm over membrane over roof surfaces complete all as per manufacturer's instructions and as directed .
M&L for Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) 75mm thick as in subbase complete all as directed.
M&L for machine cut hand dressed to true square/rectangles of uniform size kota stone slab flooring 18-20mm thick of size 400/450mm x 550/600mm laid in floors with and including 15mm thick CM 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab etc complete all as directed.
All as per item no 112 above but prepolished stones in skirtings 100mm high with and including 10mm thick CM 1:4 backing coat complete all as directed.
M & L for 25mm thick Cement concrete type B-0, 1:2:4 (usnig 12.5mm graded stone aggregate) as floor all as in
M & L for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth with a thin layer of sagol etc complete all as directed.
M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as specified and as directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint etc complete all as directed.
S & F 4.00 mm thick figured glass pin headed tupe fixed in ventillators etc complete all as directed.
M & L for Non - skid/Glossy finish/Matt finish joint free coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exc. 0.06 sqm but n.exc 0.11 sqm, in floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed.
S&F500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as directed
S&F 15mm bore bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed
S&F 15mm bore pillar taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as directed
S&F 15mm bore stop valves, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe with long shank and cup (concealed type) etc complete all as directed
S&F 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe etc complete all as directed.
S&F 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe etc complete all as specified.
S&F shower arm 15mm size, 195mm long with bend of 45degreee with flange of PTMT any colour. (Minimum weight 40 gms) etc complete all as specified and directed.
S&F fancy type Brass chromium plated 600mm long Towel Rod fixed with screws and wooden/plastic cleats etc complete all as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as directed.
S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as directed.
S&F 75mm bore PVC (SWR) bends any radius with access door etc complete all as directed.
All as per item no 130 above but 110mm dia
S&F 110 mm bore PVC (SWR) vent cowl etc complete all as directed.
S&F Cast iron Nahani trap with diameter of outlet 75mm with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as directed.
M&L for 1:4:8 type D-2 (using 40mm graded stone aggregate) Concrete bed to drain pipes including forming cradles against the sides of pipe after they are laid and tested for 150 mm bore of pipe etc complete all as specified and as directed.
Supply and lay Reinforced concrete pipes 150 mm bore of pipe class NP2 laid in trenches and jointed complete with collars etc complete all as specified and directed.
S&F Vitrous china white soap dish size 160mm160mm90mm fixed with screws and wooden/plastic cleats etc complete all as directed.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in foundation concrete and mass concrete of manholes etc complete all as specified and as directed.
M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate )in benching to man holes and finishing of exposed surfaces of concrete etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) cast -in -situ as in copings including use and waste of formwork as required etc complete all as specified and directed.
M&L for precast concrete 1:2:4 type B-1 (using 20mm graded stone aggregate)in manholes covers set in CM 1:4 including necessary form work (Note :-Reinforcement will be measured and paid separately) including necessary form work etc complete all as specified and as directed.
M & L 150mm dia pipe Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface
Supply only MS galvenised chain link fencing
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire
S & F Angle iron in vertical poles , drilled and countersunk for balusters running bars, for doors, balusters, screwing etc. , drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0
M & L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip
S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to step including embeding in concrete and screwing etc. wind ties for roof including securing boltsposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 →
S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
S & F 10mm Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long
M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coat of synthethic enamel paint over a coat of red oxide primer of approved tint etc complete all as directed.
M&L for mild steel of grade Fe 410-W(Gde-E- 250)quality-A for framed work as gates of angle or other section with gusset plates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks , hinges or steel hanging door fittings, rollers etc (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing etc complete all as directed.
M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165
M&L for preparation of new steel surfaces n,exc 10cm width or girth and applying over two coat of synthethic enamel paint of approved tint over a coat of red oxide primer etc complete all as directed.
M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as directed.
M&L for Rendering 15mm thick in cement morter 1:4 on fair faces of brick work/concrete surfaces including neeru finish to plastering as specified.
M&L for Providing cement concrete Type B0 1:2:4 using (12.50mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred/stopped ends etc complete all as specified and directed.
M & L Plain cement Concrete (1:3:6 type -C2 (using 40mm graded stone aggregate bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; insurrounding pipes with concrete after they are laid and tested; in
S & F 300MM DIA Reinforced concrete pipes, class NP2, laid and jointed complete with collar
S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
Trees:- M&L for digging of pits, removal of debris weeds/roots etc refilling with good garden soil & cattle manure in the ratio 4:1 provision of anti termite treatment at plantation time, supply & Planting of approved spacies of minimum 4' height tress, plants approved and directed by GE.
Hadges plants
Bottal palm
Floor Be plant & creeper
Alba champa
Tioma plant
Land scaping in front lawn: M&L for surface excavation n.exc 30cm deep and averaging 15cm deep in any type of Anti termite treatment at the rate of 5.00 ltr per Sqm (ratio, water 19 ltr : ATT Chemical 1ltr), refilling with 10 cm thick good garden soil & cattle manure in the ratio 4:1 mixing, levelling removing & conveying unwanted stuff to a distance exc. 150m and not exc.200m and supplying and planting of approved Approx jamping lowns all as approved and directed by Engineer-in-charge/GE
Maintenance Period :- Complete maintenance of garden features trees,shrubs,hedges/edges lawn, seasonal flower, fountain etc like hoeing weeding, pruning watering mowing of lawn/plants, rolling of lawn, hedge, ellipy ,upkeeps and maint of potted plants including loading, unloading carriage and displaying removal of garden rubbish spraying insecticides, pesticides, manuring if required and security of all above, by employing 01 (one) skilled gardner per day all as specified and directed by Engr-in-charge. (Rs.2 per Sqft per month) i.e 12000*2=Rs.24000 /month Note: The rate shall be deemed to be inclusive of following
(i) During this period of 12 months any plant,shrubs,grass etc is found dead, not true to name or size as specified or not in satisfactory growth plant of approved size and shape shall be replaced by the Contractor without any extra cost govt. (ii) If Contractor failed to comply above, the work will be caried out through other agency and amount will be reocvered from contractor. (iii) Supply and application of manure sweet earth, sand ATT chemical and pesticides, fertilizers etc are included in the quoted unit rate during maintenance period.
Excavation in over area not exc. 1.50 mtr depth in Hard/dense soil and getting out complete all as specified and directed.
M&L for black cotton soil laid in layers n. 25mm thick spread levelled and rammed including watering and including laying over sand Narmada River @5mm thick/Sqm and manuring using JAVIK KHAD @1Kg/Sqm complete all as specified and directed
M&L moorum/red bajri filling in floors or pavings, laid in layers n exc. 15cm thck, spread levelled and rammed including watering
S&F 15mm bore high density polyetheline drip pipes (HDPE) of pressure rating 6kgf/cm2 laid on ground complete all as specified and as directed.
S& for 32mm bore unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed completely to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed.
S&F 25mm bore unplasticied PVC piped of pressure rating 10kgf/cm2 fixed completely to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed.
S&F 20mm bore unplasticied PVC piped of pressure rating 10kgf/cm2 fixed completely to walls, ceilings or in floors etc any type of pipe complete all as specified and as directed.
S&F gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed 32mm bore pipe complete all as specified and directed
S&F gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed 25mm bore pipe complete all as specified and directed
S&F gun metal globe or gate valves with iron wheel head, screwed both end for iron pipe and fixed 20mm bore pipe complete all as specified and directed
M&L for making conncetion of PP-R distribution with GI/CI main of following sizes 16 to 75mm by providing and fixing tee including cutting and making fusion joint etc complete all as specified and as directed.
Note: Amount of sch of credit of Rs.8,399.20/-will be deducted from total amount of BOQ.
UNITED ENTERPRISES
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .