Loading
Loading…
Loading…
Tender Value
₹83.3 L
EMD Value
₹1.7 L
Closing Date
9 Oct 2026, 2:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
S AND T
14 conditions · 2 needing a document upload
For works amounting Rs.50 lakhs and above: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any work of Signal or Telecom involving trenching, laying & testing of Signal or Telecom cables OR Any other miscellaneous outdoor S&T work.
9 conditions · 2 needing a document upload
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII, IX, XI, VIA, VIB, VI and Annexure-V of GCC-2022 respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are requested to go through the following documents which are available in upload/View Documents in Home page of IREPS portal for works tenders before submitting the e-tender. 1. General Instruction for E-Tenders on works contract--Chapter- I 2. Special Condition-General- Chapter-II
Opening of e-tender : 1. The e-tenders will be opened online using the IREPS portal anytime after tender closing time. No representative is required to be present for opening of e-tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders through the website after the opening of the tender. 2. The earnest money cost is to be paid through online banking facilities through the online portal and by giving the other details online on website www.ireps.gov.in. Note: For more details refer to Cl: 4 & 12 of General Instruction-Chapter-I for Submission of EMD, Cost of Tender Document and opening of e- tender.
Asansol Division - Provision of Lightning and Surge Protection arrangement at two station in Asansol Division
63-SDSTE-ASN-2026-27~ER
63-SDSTE-ASN-2026-27
Open
Works - General
12 Months
Paschim Bardhaman, West Bengal
₹0
₹1.7 L
17 Sept 2026
17 Sept 2026
25 Sept 2026
64 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 40,62,360 | ||
| — | 32.00 | — | — | ||
| Supply of single spike air terminal of 17.2 mm dia. & 2000 mm length . The air terminal shall be manufactured with Copper Bonded Steel having 250 micron copper & shall be as per IEC 62561-2. The air terminal shall be fixed with concrete base arrangement and concrete base arrangement to be supplied by contractor. Inspection : Consignee. IEC standard testing certificate for this item issued by NABL accredited laboratories to be produced during inspection. | — | — | — | 1,60,000 | |
| — | 500.00 | — | — | ||
| Supply of 8 mm dia Copper Bonded Steel round solid conductor (250 Micron copper )for air termination network and shall meet the requirement of IEC 62561-2 standard. Inspection: Consignee. IEC standard testing certificate for this item issued by NABL accredited laboratories to be produced during inspection. | — | — | — | 1,60,000 | |
| — | 300.00 | — | — | ||
| Supply of parapet conductor holder (with Glue) made of stainless steel for holding 8 mm dia. round conductor . The conductor holder shall be made with Z type metal shed holder & as per IES 62561-4. Inspection : Consignee. IEC standard testing certificate for this item issued by NABL accredited laboratories to be produced during inspection. | — | — | — | 90,900 | |
| — | 20.00 | — | — | ||
| Supply of Roof Conductor holder for holding of 8mm dia. round conductor (for RCC roof). The conductor holder shall be of Stainless steel which is mounted on plastic base support and shall meet the requirements of IEC62561-4.Inspection : Consignee. IEC standard testing certificate for this item issued by NABL accredited laboratories to be produced during inspection. | — | — | — | 5,800 | |
| — | 50.00 | — | — | ||
| Supply of steel made Universal Connector for making straight, Tee & Cross joint of 8 mm dia Conductor to 8 mm dia conductor on parapet wall, roof and vertical facade of masonry / glass / metallic work. It shall meet the requirements of IEC 62561-4. Inspection : Consignee. IEC standard testing certificate for this item issued by NABL accredited laboratories to be produced during inspection. | — | — | — | 12,750 | |
| — | 70.00 | — | — | ||
| Supply of Down Conductor holder for holding of 8 mm dia. round conductor (for RCC wall). The conductor holder shall be of Stainless steel which is mounted on plastic base support and shall meet the requirements of IEC62561-4. Inspection : Consignee. IEC standard testing certificate for this item issued by NABL accredited laboratories to be produced during inspection. | — | — | — | 19,250 | |
| — | 6.00 | — | — | ||
| Supply of Digital Lightning Strike counter make JMV/OBO/DEHN/Axis Electricals or similar reputed company for counting the number of lightning strikes and has a min. 3 Digit display facility and also records date and time .The Counter should be mounted on the Down Conductor. The Lightning Counter should be IP 67 rated enclosure suitable for external application. It shall meet the requirements of IEC62561-6. Inspection : Consignee. IEC standard testing certificate for this item issued by NABL accredited laboratories to be produced during inspection. | — | — | — | 90,000 | |
| — | 250.00 | — | — | ||
| Supply of 25 x 2 mm Copper Strip as per specification No.IS-1897:2008 . Inspection: Consignee | — | — | — | 2,00,000 | |
| — | 70.00 | — | — | ||
| Supply & execution of 2DT/T/Straight ( as per requirement) Exothermic joint between 25x2 mm copper strip / 25x6 mm copper busbar/8 mm dia down conductor. This includes Welding Kit, Welding Powder, Mould and other necessary materials. All the materials and tools for welding to be supplied by the contractor. Note - No. in unit column indicates per welding. | — | — | — | 49,000 | |
| — | 2.00 | — | — | ||
| Installation and commissioning of External Lightning Protection (ELP), Class A as per IS/IEC 62305 , IEC 62561, NBC 2016 Vol-2 and RDSO TAN No. STS/E/TAN/3006 , Ver 2.3 with related items in schedule. For installation & commissioning, required necessary materials to be supplied by the contractor and required trenching, earthwork, laying of strip/conductor & other required works to be done for complete commissioning of A class lightning arrester at building, huts of the station. This work to be done as per instruction of Rly. Engineer. | — | — | — | 5,00,000 | |
| — | 32.00 | — | — | ||
| Supply & Installation of Isolating spark Gap for lightning equipotential bonding of different earth grids according to IEC62561 part-3 at 100kA impulse current, IP 68,fire retardant enclosure. IEC standard testing certificate for this item issued by NABL accredited laboratories to be produced during supply of item. Inspection by RITES. | — | — | — | 6,88,000 | |
| — | 400.00 | — | — | ||
| Supply of solder bar/stick of alloy ( Tin : Lead - 60:40). and solder bar/stick to be of suitable size , of approx. 500 gm /1000 gm . Inspection- Consignee ( it is a maintenance related sub- item having no rdso/irs spec.) | — | — | — | 10,75,560 | |
| — | 20.00 | — | — | ||
| Supply of Kerosene/petrol Blow Lamp Pump Oil Burner Torch Flame Primus Brass Gun o f Half Litre Capacity. made of brass. components : Fuel tank,Burner tank,burner,flame tube,Nipple,Wire cloth,washer for oil filler cap. Inspection : Consignee | — | — | — | 36,500 | |
| — | 20.00 | — | — | ||
| Supply of surge voltage protection device mounted on din rail suitable for CEL make SSDAC/HASSDAC as per RDSO Spec. no. RDSO/SPN/175/2012, Ver. 3. Inspection: RDSO | — | — | — | 5,54,600 | |
| — | 10.00 | — | — | ||
| Supply of 3-1/2 digits LCD Readings with maximum value 1999 Digital Light Meter, Measuring Range Scale 0.1 - 19990 Lux. Brand: Metravi , Fluke, Testo or similar reputed company. The technical specification of Light meter is given in Anexure-II. | — | — | — | 1,00,000 | |
| — | 4.00 | — | — | ||
| Supply of FLUKE VT08 (or Fluke make similar model) Infrared Thermal Imager/camera with Infrared resolution 120x90, IR frequency band 7.5 14 mlong wave), Frame rate 9Hz; Thermal sensitive/NETD <60 mk; field of view (HxV) 500 x 37.50 spatial resolution 7.6 mrad; free focus system, minimum focusing distance 0.5m; Image mode - Thermal image visible image PIP; Platters- Ironbow, Blue-Red, High-contrast, Amber, Hot Metal gray scale; Internal storage > 28GB (>100000 images), file formate- .Jpg, PIP mode- YES; Temperature range -200C to 4000C, Temperature accuracy ±2°C or 2% @ 23°C±5°C, whichever is greater; having background compensation, auto high low temperature capture & center point temperature, maximum/ minimum temperature alarm in full screen, visible lens- YES, Flashlight- YES, Laser sighting-YES, Type interface- YES, Tripod interface- YES, Unremovable & rechargeable Li-ion battery more than 5 hours operation time, <2.5 hrs to full battery charging, charging adaptor output 5 VDC, 2A, Operating temperature 100C to 500C; with accessories including wrist strap, quick reference guide, charger+ adaptor, type C data cable, data-downloading card, 2.4 inch LCD, Size- 20.4 cm x 6.6 cm x 7.6 cm, weight- 0.36 kg, relative humidity ±90% non-condensing; safety standard- IEC 61010-1: Pollution Degree 2; Laser - IEC 60825-5:class 2 650 nm, <1 mW; Protection class-IEC 60529:IP65(with Type-C port closed): Drop test 2m; Warranty - 1 year. Inspection: Consignee | — | — | — | 3,20,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Modified_Cable_cut_JPO_NO._94.pdf Annexure I
ATTACHMENT
ALLANNEXURENEW.pdf
ATTACHMENT
lightingsurgeprotection.pdf
ATTACHMENT
GCC_April-2022.pdf
ATTACHMENT
mergedGCCCorrectionslip3456.pdf GCC Correction Slip 3456
ATTACHMENT
MergedGCCCorrectionSlip78910.pdf GCC Correction Slip 7 8 9 10
ATTACHMENT
GCC Correction Slip 1
ATTACHMENT
GCC Correction Slip 2
ATTACHMENT
Modified_Cable_cut_JPO_NO._94.pdf
ATTACHMENT
mergedGCCCorrectionslip3456.pdf
ATTACHMENT
MergedGCCCorrectionSlip78910.pdf
ATTACHMENT
2022_CE-I_CT_GCC-2022Policy14.07.2022.pdf
ATTACHMENT
ACS-2toGCC-2022_2022-CE-1-CT-GCC-2022-POLICY_13.12.20221.pdf
ATTACHMENT
GCCCorrectionslip11.pdf
ATTACHMENT
2018-CE-I-CT-9dtd.pdf
ATTACHMENT
Annexure-C.pdf
ATTACHMENT
CheckList.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .