Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 38 NEW MARKET RAWATBHATA CHITTORGARH RAJASTHAN 323305 | CHITTORGARH | RAJASTHAN | 323305 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance SHOP NO 2 GUN NIDHI CHS AMBADI ROAD VASAI WEST THANE MAHARASHTRA 401202 | PALGHAR | MAHARASHTRA | 401202 | Admitted-Finance |
| 4 | Admitted-Finance 6 VANARAI SHOPPING COMPLEX W E HIGHWAY GOREGAON E MUMBAI 400065 | MUMBAI SUBURBAN | MAHARASHTRA | 400065 | Admitted-Finance |
| 5 | Rejected-Technical | Rejected-Technical Does not meet the requirement of NIT clause no. 3(c) i.e. Average Annual Financial Turnover shoul be atleast Rs. 47.84Lakhs. |
Tender Value
₹47.8 L
EMD Value
₹95,680
Closing Date
9 Jan 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Project Director, INRPC,NRB,BARC,Tarapur
Project Director, INRPC, NRB, BARC, Tarapur
Electrification Jobs of Block No.-115 at INRP Site, Tarapur.
2022_NRB_724964_1
BARC(T)/NRB/INRPC/ELE39/1627 DATE 21/11/2022
Open Tender
Electrical Works
Item Rate
240 days
INRPC, NRB(T), BARC
Please refer Tender Document.
8 documents required · 8 mandatory
₹0
₹95,680
PD Office, INRPC, BARC, Tarapur-401502
6 Apr 2023
29 Nov 2022
10 Jan 2023
29 Nov 2022
9 Jan 2023
21 Dec 2022
14 Dec 2022
Amount
Supply of following configuration 415V,3-phase-4 wire, Prewired with FRLS PVC/ HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Hot dipped/ Pre Galvanised G. I sheet steel, powder coated with RAL7032 shade, suitable for surface/recess mounting complete with earth bar, din bar for MCB mouting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, check-nuts etc. as required as per SLD and technical specifications.
MCB DB with Incomer of 40A, Isc=10kA, Type C, TPN MCB with 2-Pole, 40A, Isc=10kA, (100mA) RCBO for each phase and 18 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.
MCB DB with Incomer of 25A, Isc=10kA, Type C, TPN MCB with 2-Pole, 25A, Isc=10kA, (100mA) RCBO for each phase and 12 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.
MCB DB with Incomer of 32A, Isc=10kA, Type D, Four Pole MCB with 2-Pole, 25A, Isc=10kA, (100mA) RCBO for each phase and 12 nos. of 16A, Isc=10kA, Type D, DP Ougoing MCB feeder as per SLD and technical specification.
Installation, Testing and Commissioning of following configuration 415V,3-phase-4 wire, Prewired with FRLS PVC/ HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Hot dipped/ Pre Galvanised G. I sheet steel, powder coated with RAL7032 shade, suitable for surface/recess mounting complete with earth bar, din bar for MCB mouting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, check-nuts etc. as required as per SLD and technical specifications.
MCB DB with Incomer of 40A, Isc=10kA, Type C, TPN MCB with 2-Pole, 40A, Isc=10kA, (100mA) RCBO for each phase and 18 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.
MCB DB with Incomer of 25A, Isc=10kA, Type C, TPN MCB with 2-Pole, 25A, Isc=10kA, (100mA) RCBO for each phase and 12 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.
MCB DB with Incomer of 32A, Isc=10kA, Type D, Four Pole MCB with 2-Pole, 25A, Isc=10kA, (100mA) RCBO for each phase and 12 nos. of 16A, Isc=10kA, Type D, DP Ougoing MCB feeder as per SLD and technical specification.
Supply of following configuration 240V,1-phase-2 wire, Prewired with FRLS PVC/ HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Hot dipped/ PreGalvanised G. I sheet steel, powder coated with RAL7032 shade, suitable for surface/recess mounting complete with earth bar, din bar for MCB mouting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, check-nuts etc. as required as per SLD and technical specifications.
MCB DB with Incomer of 25A, Isc=10kA, Type C, DP MCB and 8 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.
Installation, Testing and Commissioning of following configuration 240V,1-phase-2 wire, Prewired with FRLS PVC/ HFFR copper wires, IP-54, MCB Distribution Board fabricated out of 2mm thick Hot dipped/ PreGalvanised G. I sheet steel, powder coated with RAL7032 shade, suitable for surface/recess mounting complete with earth bar, din bar for MCB mouting, 2 mm thick removable gland plate on both top and bottom side with required number of knock out holes , neoprene gasket, check-nuts etc. as required as per SLD and technical specifications.
MCB DB with Incomer of 25A, Isc=10kA, Type C, DP MCB and 8 nos. of 16A, Isc=10kA, Type C, SPN Ougoing MCB feeder as per SLD and technical specification.
Supply of the following Industrial switches/ MCB in the existing recess mounted GI Box and Decorative switches in the recessed mounted PVC Box as per Technical specifications.
2 nos. of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate face plate and suitable mounting arrangements as per technical specification.
Installation of the following Industrial switches/ MCB in the existing recess mounted GI Box and Decorative switches in the recessed mounted PVC Box as per Technical specifications.
2 nos. of 6A, Single Pole, Modular type Decorative Switch with Polycarbonate box, heavy duty polycarbonate face plate and suitable mounting arrangements as per technical specification.
Supply of the following Industrial switches and plug sockets with suitable plug tops (3-pin) in the existing recess mounted GI Box and 3 pin Domestic plug sockets with suitable PVC Box, switch and plug tops as per Technical specifications.
2 nos. of 6A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB along with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.
1 nos. of 16A, Single phase three pin Industrial Socket with MCB and with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.
1 nos. of 6A and 1 nos. of 16A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket along with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.
1 nos. of 6A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification.
1 nos. of 6A and 1 nos. of 16A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch for each Socket and heavy duty Polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification.
Installation of the following Industrial switches and plug sockets with suitable plug tops (3-pin) in the existing recess mounted GI Box and 3 pin Domestic plug sockets with suitable PVC Box, switch and plug tops as per Technical specifications.
2 nos. of 6A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB along with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.
1 nos. of 16A, Single phase Industrial Socket with MCB and with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.
1 nos. of 6A and 1 nos. of 16A, Single phase Industrial Socket with Isc=10kA, Type C-Curve, Industrial type MCB for each Socket along with pre- Galvanised powder coated GI sheet steel Face Plate, Industrial Plug Tops and suitable DIN rail and mounting arrangements as per technical specification.
1 nos. of 6A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch and heavy duty polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification.
1 nos. of 6A and 1 nos. of 16A, Single phase Modular Decorative Type Socket with Polycarbonate box, Switch for each Socket and heavy duty Polycarbonate Face Plate, plug tops and suitable mounting arrangements as per technical specification.
Supply and surface conduiting of 14 SWG black enamelled heavy duty rigid GI conduit pipe of 25mm sizes along with all accessories such as inspection bends, junction box, socket, check nut, etc. including making threads, removing burrs, connection of accessories, drawing of fish wire . as required under the instruction of Engineer-in-in charge.
Supply
Installation
Supply and laying of 14 SWG bare solid copper conductor throughout along the conduit including fixing with ties, brazing etc as required.
Supply
Installation
Supply of LED light fittings complete with light fitting accessories, including supply of fixing accessories, twin twisted tinned 1.5 sq. mm copper flexible cords for terminal connections, 16 SWG copper wire for earthing , flexible GI metallic conduit sleeves, PVC conduit bushes, cable lugs and testing and commissioning as per the specification of the following
LED street light fitting of not more than 34W having System Efficacy >110 lm/W, system output >=3800 Lumens, THD <10%, Power Factor >0.95, CRI >70, CCT 5700, IP 66 protected pressure die cast aluminium housing having PC diffuser with IK07. Luminiare should be suitable for Pole dia of 32-40mm.. Luminaire shall sustain 440V Stress Voltage protection for 8 Hrs., High Cut off : 325V(+/- 15V) and should have feature of Auto Restart. Driver shall have 4KV Surge protection. Submission of LM80-08 for LED source & LM79-08 for Luminaire from NABL Accrediated Lab manadatory. BIS certified.
LED waterproof light fittingof 36w having System Efficacy >120 lm/W, system output >4400 Lumens, THD <10%, Power Factor >0.95, CRI >80, CCT 6500, Full IP 65 protected , body made of UV shielded poly carbonate extrusion PC with Impact resistance IK08, , Life L70B50 @ 50k hrs,ripple <5%. LED driver should be Potted & Encapsulated . High Voltage Cut-off@ 325V. BIS compliant driver , EMC -EMI compliant. Driver shall have 4KV Surge protection. Submission of LM80-08 for LED source & LM79-08 for Luminaire from NABL Accrediated Lab manadatory. BIS certified.
2'x2' grid mounted 32W LED luminaire with CRCA housing. With UGR<16 for glare free ligting. System Lumen output should be 3750 lumens or more. Luminaire should be with specially designed heat management system to ensure luminous efficacy > 115 lm/ W for the system and life 50000 Burning hrs with 70% lumen maintenance @ design ambient temp 0 deg C to +45 deg C..The luminaire is designed to meet IP 20 classification and is compliant with relevant immunity, safety and performance and EMI standards. CRI > 80 with surge Protection of 2.5KV with external Input Voltage Range should be 140-270 VAC. Total harmonic distortion shall be <10% and power factor >0.95 ; Luminaire should have inbuild thermal protection.Submission of LM80-08 for LED source & LM79-08 for Luminaire from NABL Accrediated Lab manadatory. BIS certified.
6W LED Bulkhead luminaire with pressure die cast housing with polycarbonate cover .System Lumen output should be 700 lumens or more. Luminaire should be with specially designed heat management system to ensure luminous efficacy > 110 lm/ W for the system and life 50000 Burning hrs with 70% lumen maintenance @ design ambient temp 0 deg C to +45 deg C..The luminaire is designed to meet IP 66 & IK09 classification and is compliant with relevant immunity, safety and performance and EMI standards. CRI > 80 & Surge Protection of 2.5KV. Total harmonc distortion shall be <10% and Power Factor>0.9; Luminaire should have inbuild thermal protection.Submission of LM80-08 for LED source & LM79-08 for Luminaire from NABL Accrediated Lab manadatory. BIS certified.
Installation, Testing and Commissioning of LED light fittings complete with light fitting accessories, including supply of fixing accessories, twin twisted tinned 1.5 sq. mm copper flexible cords for terminal connections, 16 SWG copper wire for earthing , flexible GI metallic conduit sleeves, PVC conduit bushes, cable lugs and testing and commissioning as per the specification of the following
LED street light fitting of not more than 34W having System Efficacy >110 lm/W, system output >=3800 Lumens, THD <10%, Power Factor >0.95, CRI >70, CCT 5700, IP 66 protected pressure die cast aluminium housing having PC diffuser with IK07. Luminiare should be suitable for Pole dia of 32-40mm.. Luminaire shall sustain 440V Stress Voltage protection for 8 Hrs., High Cut off : 325V(+/- 15V) and should have feature of Auto Restart. Driver shall have 4KV Surge protection. Submission of LM80-08 for LED source & LM79-08 for Luminaire from NABL Accrediated Lab manadatory. BIS certified.
LED waterproof light fittingof 36w having System Efficacy >120 lm/W, system output >4400 Lumens, THD <10%, Power Factor >0.95, CRI >80, CCT 6500, Full IP 65 protected , body made of UV shielded poly carbonate extrusion PC with Impact resistance IK08, , Life L70B50 @ 50k hrs,ripple <5%. LED driver should be Potted & Encapsulated . High Voltage Cut-off@ 325V. BIS compliant driver , EMC -EMI compliant. Driver shall have 4KV Surge protection. Submission of LM80-08 for LED source & LM79-08 for Luminaire from NABL Accrediated Lab manadatory. BIS certified.
2'x2' grid mounted 32W LED luminaire with CRCA housing. With UGR<16 for glare free ligting. System Lumen output should be 3750 lumens or more. Luminaire should be with specially designed heat management system to ensure luminous efficacy > 115 lm/ W for the system and life 50000 Burning hrs with 70% lumen maintenance @ design ambient temp 0 deg C to +45 deg C..The luminaire is designed to meet IP 20 classification and is compliant with relevant immunity, safety and performance and EMI standards. CRI > 80 with surge Protection of 2.5KV with external Input Voltage Range should be 140-270 VAC. Total harmonic distortion shall be <10% and power factor >0.95 ; Luminaire should have inbuild thermal protection.Submission of LM80-08 for LED source & LM79-08 for Luminaire from NABL Accrediated Lab manadatory. BIS certified.
6W LED Bulkhead luminaire with pressure die cast housing with polycarbonate cover .System Lumen output should be 700 lumens or more. Luminaire should be with specially designed heat management system to ensure luminous efficacy > 110 lm/ W for the system and life 50000 Burning hrs with 70% lumen maintenance @ design ambient temp 0 deg C to +45 deg C..The luminaire is designed to meet IP 66 & IK09 classification and is compliant with relevant immunity, safety and performance and EMI standards. CRI > 80 & Surge Protection of 2.5KV. Total harmonc distortion shall be <10% and Power Factor>0.9; Luminaire should have inbuild thermal protection.Submission of LM80-08 for LED source & LM79-08 for Luminaire from NABL Accrediated Lab manadatory. BIS certified.
Supply of Power Cables (A2XWY (P) / 2XWY (P) as mentioned below), Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath and outer sheath FRLS PVC (ST-2 type), of 1.1 kV grade as per IS 7098 (part - 1) 1988.
4C x 4 Sq. mm., Cu
4C x 6 Sq. mm., Cu
3C x 4 Sq. mm., Cu
3C x 6 Sq. mm., Cu
3C x 10 Sq. mm., Cu
3C x 25 Sq. mm., Cu
3C x 95 Sq. mm., Al
Installation of Power Cables (A2XWY ( P ) / 2XWY (P) as mentioned bellow), Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath and outer sheath FRLS PVC (ST-2 type), of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.
4C x 4 Sq. mm., Cu
4C x 6 Sq. mm., Cu
3C x 4 Sq. mm., Cu
3C x 6 Sq. mm., Cu
3C x 10 Sq. mm., Cu
3C x 25 Sq. mm., Cu
3C x 95 Sq. mm., Al
Supply of Brass Double Compression type Cable gland suitable for Multistranded, round wire Armoured, XLPE insulated for cables of following sizes.
4C x 4 Sq. mm., Cu
4C x 6 Sq. mm., Cu
3C x 4 Sq. mm., Cu
3C x 6 Sq. mm., Cu
3C x 10 Sq. mm., Cu
3C x 25 Sq. mm., Cu
3C x 95 Sq. mm., Al
Supply of Cu Lugs suitable for cable of following size multistranded, round wire Armoured, XLPE insulated power Cables as mentioned below alongwith accessories required for end termination of cables.
4C x 4 Sq. mm., Cu
4C x 6 Sq. mm., Cu
3C x 4 Sq. mm., Cu
3C x 6 Sq. mm., Cu
3C x 10 Sq. mm., Cu
3C x 25 Sq. mm., Cu
3C x 95 Sq. mm., Al
Glanding and End Termination of power cable of following sizes
4C x 4 Sq. mm., Cu
4C x 6 Sq. mm., Cu
3C x 4 Sq. mm., Cu
3C x 6 Sq. mm., Cu
3C x 10 Sq. mm., Cu
3C x 25 Sq. mm., Cu
3C x 95 Sq. mm., Al
Supply of Single Core HFFR/ FRLS wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS: 3961 (part V) - 1968. As per conductor class 2 of IS: 8130 / 1984 as per technical specification
Installation/drawing through concealled/ surface conduit and wiring and termination at both ends of Single Core HFFR/ FRLS PVC wires (Copper) of size mentioned below in voltage grade 1100 V as per the IS: 3961 (part V ) - 1968. As per conductor class 2 of IS: 8130 / 1984 as per technical specification
Supply and laying of 95 sq. mm tinned copper conductor in RCC trench/ underground upto depth of 1 meter, connection with earth pit at one end and conductor tail at other end, including clamping, brazing, connection etc. as per instructions by Engineer-In-Charge.
Supply
Installation
Supply and surface/ concealed laying of 10 sq. mm tinned copper conductor, connection with earth pad at one end and DBs at other end clamping, brazing etc. as per instructions by Engineer-In-Charge.
Supply
Installation
Supply of Copper lug suitable for item no. 21 along with GI nut bolts of size 10mm, for terminating 10 sqmm tinned copper conductor at the earth pad/ DBs
Supply
Installation
Earth Test link Boxes (MOC: Hot Dip Galvanised with powder coating) as per the attached technical specification.
Supply
Installation
Supply and Installation of Vertical Air Termination of length 1mtr, 25mm dia Copper rod with 5 Nos of spikes as per the attached technical specification and attached drawing
Supply of Single Phase, 240V, 600mm Sweep Heavy Duty Industrial Pedestral Fans suitable for floor mounting with regulator.
Supply Fabrication and Installation of Standard steel sections as per IS 2062 Grade B0 for cable tray supports including GI rod for cable tray support, base frames for panels, anchor fasters, wall frames and brackets for supporting equipment. Fabrication shall include drilling , entiling, welding wire bruse clening, supply of all consumables like gas, welding rods. After fabrication two coats of epoxy based primer and two coats of finish paints shall be applied
Supply of ladder type cable tray of following size fabricated out of 2.5mm thick sheet steel having side channel of 100mm, rungs spaced at 250mm, hot dipped galvanized, single length not less than 2.5mtr with two coupling/ joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor enviornment
150 mm (W), 100 mm (SH)
300 mm (W), 100 mm (SH)
Installation of ladder type cable tray of following size fabricated out of 2.5mm thick sheet steel having side channel of 100mm, rungs spaced at 250mm, hot dipped galvanized, single length not less than 2.5mtr with two coupling/ joint plates per tray length having one long groove for adjustment and suitable for indoor as well as outdoor enviornment
150 mm (W), 100 mm (SH)
300 mm (W), 100 mm (SH)
Supply of single bend Pre-galvanised Perforated cable tray of Pre-galvanised G.I sheet steel of thickness 2.0 mm (14G) with suitable accessories such as Horizontal bend, Tee, Cross, Reducer, Vertical bend (Inside and Outside) of following widths and side height
150 mm (W), 100 mm (SH)
300 mm (W), 100 mm (SH)
Installation of single bend Pre-galvanised Perforated cable tray of Pre-galvanised G.I sheet steel of thickness 2.0 mm (14G) with suitable accessories such as Horizontal bend, Tee, Cross, Reducer, Vertical bend (Inside and Outside) of following widths and side height
150 mm (W), 100 mm (SH)
300 mm (W), 100 mm (SH)
Supply of dome type cable tray cover of following size fabricated out of 2.0mm thick Pre-galvanized G.I sheet steel, single length not less than 2.5mtr with suitable cable tray clamps and other accessories such as horizontal bend, Tee, Cross, Reducer, Vertical bend (Inside and Outside)
150 mm (W), 15 mm (SH)
305 mm (W), 15 mm (SH)
Supply and laying of of 25 mm X 6 mm thick G.I strip for earthing of Cable trays including connection/ terminating with nut, bolt, spring, washer etc. as required.
Supply
Installation
Moon Light
JAGGI ELECTRICALS
S M Refrigeration
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .