8808 COMPREHENSIVE REPAIR TO JCOS OR MD ACCOMMADATION ALONG WITH PAINTING WKS IN AOR OF AGE BR II UNDER GE SOUTH PUNE

Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl chequered tiling and Paver blocks complete all as specified and directed.

Dismantling stone slabs of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.

M & L for PCC 1:4:8 , type D-2, using 40mm graded crushed stone aggregate as in foundation , filling and mass concrete complete all as specified and directed.

M&L for 25mm thick PCC type B-0 1:2:4 ( 12.50mm graded agg) as in levelling coursecomplete all as specified and as directed.

M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection and the like all as specified and directed.

M&L for filling joints between two panels with mix of 85/25 bitumen and sand in 1:3 complete all as specified and directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

M&L for coloured glazed ceramic designed tiles in vertical surface 600x 300x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over incl. 10-20 mm thick backing coat in CM 1:4 to maintaine true plumb incl dismantling floor, hearth or wall tiling including taking down backing coat, removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed.

M&L for Glazed ceramic tiles in vertical surface 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over incl. 10-20 mm thick backing coat in CM 1:4 to maintaine true plumb incl dismantling floor, hearth or wall tiling including taking down backing coat, removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding g 0.06 sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, incl complete all as speicified and directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, incl dismantling floor, hearth, removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed.

M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in skiriting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over 10mm thick backing coat in CM 1:4 incl dismantling floor, hearth or wall tiling including taking down backing coat, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L ( light shade) Virified Ceramic tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 incl dismantling floor, hearth, removing serviceable tiles to store and rubbish off the premises complete all as speicified and directed.

M & L ( light shade) Virified Ceramic tiles 7-8 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over 10mm thick plaster in CM 1:4 incl dismantling floor, hearth or wall tiling including taking down backing coat, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L granite ( of any type ) work ( table rubbed and polished ) 18-20 mm thick in steps, jambs, pillars, window cill , cooking platform and flooring including bedding layer 15 mm thick in CM 1:6 on stone / brick masonry / concrete surfaces including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as speicified and directed.

Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed.

M & L cutting grooves on stone slabs such as in steps and other similar situations complete all as specified and directed

M & L Machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement all as speicified and directed.

S&F GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc including taking up or down carefully steel tubing and connections complete all as specified and directed of the following sizes :-

(a) 15mm bore

(b) 20mm bore

(c) 25 mm bore

Refixing of old steel tubing and connections in new or old position (wall/floor/ceiling etc) including taking up or down carefully steel tubing and connections including cleaning for refixing complete all as specified & directed of sizes :-

(a) 15mm bore

(b) 20mm bore

S&F in repairs Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed of following bore of pipe :-

(a) 15mm bore

(b) 20mm bore

(b) 25 mm bore

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades,shelves , lintels, etc.and cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth in brick walls complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, waste coupling 32mm bore of CP incl 15mm bore CP fancy type pillar cock etc all as specified and directed.

S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor including trap set in and including concrete cpmplet all as specified and directed.

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices complete all as specified and directed.

S & F in repairs 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, including flush pipe 32 mm dia complete all as specified and directed.

S&F in repairs 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes complete all as specified and directed.

S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flange complete all as specified and directed.

S & F in repairs 15 mm bore pillar taps,fancy type cast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed.

S & F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for union complete all as specified and directed.

Ditto all as per item no 30 but consealed long shank

S&F in repairs CP Wall mixer 3-in-1 for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore of pipe complete all as specified and directed.

S & F in repairs 125 mm dia brass chromium plated shower rose including shower arm of approved quality complete all as specified and directed.

S & F in repairs CP health faucet (ABS Body) with 1 mtr long flexible cod complete all as specified and directed.

S & F in repairs 15 mm bore, 600 mm long PVC connections with PTMT nuts complete fixed to iron pipe at both ends complete all as specified and directed.

S & F in repairs brass chromium plated Tubular towel rail 20mm dia "D" type 60cm long complete all as specified and directed.

S & F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.

S & F in repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed.

Supply and fix in repairs elbow operated pillar tap cast copper alloy, brass chromium plated, screw down, single leaver surgical purpose with extended operating lever of cat ID-FLR-5031N of jagur,cera,hindware or as approved by GE from the list of make

S & F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats fixed in repairs complete all as specified and directed.

S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as speicified and directed.

S & F in repairs stainless steel kitchen sink without drainage board of 1 mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets or fixed as in counter type in granite/ cudappa platform and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply and fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, CP Brass waste coupling washers and waste pipe and fitting including bedding in cement mortar to dwarf wall or including fixing & providing cantilever brackets and connecting union to pipe, over all size of sink 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm, complete all as speicified and directed.

S & F Rotational moulded polyethylene water storage tanks of capacity 500 Litre (cylindrical vertical with closed top) hoisted and fixed in position incl all necesarry GI fittings including dismantling of existing water tank complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of capacity 1000 Litre (cylindrical vertical with closed top) hoisted and fixed in position incl all necesarry GI fittings including dismantling of existing water tank complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks of capacity 2000 Litre (cylindrical vertical with closed top) hoisted and fixed in position incl all necesarry GI fittings including dismantling of existing water tank complete all as specified and directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 15 mm bore complete all as specified and directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 20 mm bore complete all as specified and directed.

S & F in repairs ball valves high pressure of PTMT with epoxy coated, aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule 25 mm bore complete all as specified and directed.

M & L for Cleaning of PVC water tank of capacity upto 500 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. by using bleaching powder complete all as specified and directed.

M & L for Cleaning of PVC water tank of capacity upto 1000 ltr and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. by using bleaching powder complete all as specified and directed.

S & F flexibe waste pipe of 32 mm or 40 mm dia for wash hand basins, sink etc complete as fixed in repairs complete all as specified and directed.

S & F in repairs stainless steel gratings 100 mm dia with hole for waste pipe complete all as specified and directed.

M & L 75 mm dia of outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including taking down existing pipe complete all as speicified and directed. Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall,including taking down existing pipe complete all as speicified and directed. Note :- Rate quoted shall deemed to be inclusive of necessary scaffolding / security measures as the work is to be carried out for elevated height upto 12 mtr height building.

S&F 110mm bore PVC (SWR) bends / Tee with access door, complete all as speicified and directed.

S&F 75mm bore PVC (SWR) bends / Tee with access door, complete all as speicified and directed.

S&F in repair plastic water closet (EWC) seat cover white closed pattern with flat bottom and cover including mild steel chromium plated hinging device complete all as specified and directed.

S &F in repairs PVC syphon with rod for low level flushing cistern incl PVC handle with adjustable lever (flushing cistern kit ) complete all as specified and as directed.

S &F in repairs flush handle PVC with adjustable Lever and hook for low level flushing cistern complete all as specified and as directed.

S&F in repairs vitreous china ceremic white single piece WC (S or P trapP with UF soft close seat cover , hinges, accessorires set, size 365x655x765 mm, product Code : LYS-WHT-38851SSM of Jaquar or as approved by GE from the list of make complete all as specified and directed.

S&F in repair cascade type (coloured) floor mounted water closet with lowlevel flushing cistern single piece coloured with floor trap , PVC coloured seat cover and connecting pipe etc complete all as speicifed and directed by Engr-in-charge Make: Jaquar cat no.FNS-WHT-40751P180UFSMZ or as approved by GE from the list of make

S&F in repairs HDPE PVC lid (cover) suitable for 500 ltr to 1000 Ltrs capacity PVC water tanks, complete all as speicified and directed.

S&F in repairs 2mm thick PVC fibre mirror cabinet of size (450x325x120mm ) and fixed to wall after taking down old mirror, complete all as speicified and directed.

S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as speicified and directed.

M&L for removal of air lock / blockage of water in GI tubing 15mm bore of any type including taking down (if required), cleaning the pipe or fittings etc and refixing the same in position complete all as specified and as directed.

M&L for removal of air lock / blockage of water in GI tubing 20mm bore of any type including taking down (if required), cleaning the pipe or fittings etc and refixing the same in position complete all as specified and as directed.

Taking down shutters of any description n.exc 1.0 sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as all specified.

Taking down shutters of any description exc 1.0 sqm but n.exc 2.00 Sqm each and rescuring or easing & adjusting after repair in door opening and connected carpentry work and refixing at same opening complete all as all specified.

Taking down shutters of any description exc 1.0 sqm and n exc 2 sqmtr complete all as specified & as directed

S & F pressed steel frames of size 105mm X 60 mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, incl M & L for providing PCC type B-0 ,1:2:4(using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame incl taking down of chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed.

S & F pressed steel frames of size 125mm X 60mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, incl M & L for providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame incl taking down of chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed.

S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSR part-I Section 8 cluse 8.24(a) and Fitted to chowkats complete all as specified and as directed.

S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters/ any number member of panels) with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I ) kiln seasoned and chemically pressure treated all as specified and as directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with lipping all as specified and as directed.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening incl taking down of chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions and as directed by Engineer-in-Charge.

Supply and fix 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed.

Supply & fix aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

Supply and fix 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified.

Supply and fix 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified.

S&F in repairs 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified.

S & F in repairs aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified.

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F in repairs 100 mm size stainless steel fancy type handles complete all as specified.

S &F in repairs 20 mm bore aluminium powder coated curtain rod complete all as specified and as directed.

S &F in repairs aluminium powder coated fancy type bracket suitable for 20 mm bore curtain rod complete all as specified

S&F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples to steel or wooden windows/door/shutters/frames etc. complete all as specified and as directed.

S&F in repairs Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door / shutters / frames etc. complete all as specified and as directed.

S&F in repairs, stainless steel plate rack of size 36inch x 39 inch x 10inch, made out of 0.63mm thick stainless steel sheet (Grade AISI 304 18/8), S S screws and round pipe, fixed to wall with screws complete all as specified and as directed. Make – Blue Star Silver Shine Cat No.KPR-315 or as approved by GE from the list of make.

S & F in repair 18 mm thick Rajshri Celuka ply of Single Side Prelam/ Rigidlam color fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. (Density- 575 to 600 Kg/CBM) (Make- Rajshri Plastiwood or its equvallent.

S & F in repair 18 mm thick Rajshri Celuka ply of Plain White colour both side fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per specifications and as directed by the engineer - in -charge. (Density- 575 to 600 Kg/CBM) (Make- Rajshri Plastiwood or its equvallent.

S& F in repair chromium plated towel rack with lower hanger ,brass raling , including brass screw complete all as specified and directed.

S &F in repairs CP grating round 100 mm size complete all as specified and directed.

Rubber door seal, 32mm wide with aluminium strip of size 19mm wide fixed with machine made steel screws with washers, fixed in repairs, complete all as specified and directed.

S & F Continuous (piano) hinges 30 mm width of flap,mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S & F Magnetic door catches for cupboard/cabinet etc complete all as specified and as directed.

S&F 100mm dia Brass handles, cast type, polished bright cupboard handles fixed with nuts screws and washer complete all as specified and directed.

M&L for running welding in repairs not exc 6mm thick plates and angles complete all as specified and as directed.

S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) using following sections as given in 'JINDAL' catlogue complete all as specified and as directed. (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

M & L Double action Floor Spring Hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing poivet made of brass, other parts made of brass, other part made of mild steel heavy duty and fixed.

S&F in repairs Door closer hydraulically regulated, aluminium extruded section body, design No. 3, universal type, suitablefor door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.

S&F in repairs three track sliding window with two or more shutter with 4mm thick tinted glass and one shutter using stainless steel wire cloth 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or as approved by GE from the list of make complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724 (e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352.

S & F in repairs ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catalogue of 'JINDAL or as approved by GE from the list of make (a) SP : 20048 (b) Glazing clips : 19352

S&F in repairs powder coated anodised aluminium fixed partition , comprising of at least 63.50 x 38.10 x 1.85 mm aluminium section and including jointing cleats, aluminium snap beading 20x15mm, rubber gasket, glazing clips, 5mm thick froasted glass in top and 12mm thick prelaminated particle board (both side laminated) in bottom panel, fixed with rubber beading and glazing clips and all other fittings required to erect as per site requirement and as approved by Engr-in-charge complete.

S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge.

S&F in repair Floor door stopper of aluminium alloy body double tongue annodised with rubber shoe and fixed of size 140 mm all as specified and as directed.

Repairing of existing aluminium door single leaf including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified.(Floor door springs where renewed shall be measured and paid separately under appropriate.

Repairing of existing aluminium door double leaf including oiling and greasing of floor springs and making the door and shutter serviceable complete all as specified.(Floor door springs where renewed shall be measured and paid separately under appropriate

M&L in repair for 3mm thick ACP sheet wooden finish along with frame work and making groove and shelf as directed by Engineer-in-charge.

M&L for preparing new surfaces of wood of any description no otherwise described over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed.

Dismantling of wrought or MS work of any description etc as directed.

M&L for MS framed work conforming to grade E-165 (Fe-290) or Fe-310-O of MS angle or other sections, such as grills, gratings with ends of bar shouldered and / or riveted or forged into spikes; framed guard bars; railings and like incl dismantling old existing grill/ grating wk or wrought iron work of any desc and any position, gates etc completed all as directed by Engineer-in-charge.

S&F framed work for doors or gate of angle, plain sheet or other sections etc. complete drilled for fixing of steel sheeting, incl necessary welding etc of grade Fe-410-w(Gde-E-250 quality B) complete incl dismantling structural steel incl doors or wrought iron work of any desc and any position, gates etc

M&L for stainless steel (Grade 304) railing,corner guards made of angles, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts/screws etc., of required size, on junctions of Wall etc, with suitable arrangement complete all as specified & as directed.

M&L for preparing new surfaces of steel over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamal (ordinary tint) over a coat of red oxide primer all as specified and as directed.

Material & Labour for wall panelling with 12 mm thick BWR plywood, one side laminated with 1mm thick decorative laminate including wooden frame work of 2nd class HW battens of size 125mm x 40mm fixed with screws including dismantling of old panelling complete all as directed by Engr-in-Charge

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 595 x 595 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

M & L Providing and fixing Gypsum Board 12.50mm thick in ceiling fixed with screw (as per manufacturers instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over primer on ceiling including dismantling of existing false ceiling with gridcomplete all as specified and directed.

M & L for decorative POP cornices/moulding of pattern as per approved by Engr-in-charge of cross section area exc 13 Sqcm and not exc 25 Sqcm including two coats of oil bound distemper over primer on ceiling complete all as specified and directed.

Hacking out old broken glass of any thickness/Size or quality from aluminium door / window frame fixed With rubber packing and aluminium beading tinted glass and S&F 5.5mm thick sheet glass plain ordinary quality area exceeding 0.50 sqm each pane complete all as specified and as directed.

Hacking out old broken glass of any thickness/Size or quality from wooden/metal frame fixed With putty / beading & S&F 3mm thick sheet glass, plain or frosted ordinary quality not exc 0.5 sqm in each pane complete all as specified and as directed.

S&F in repairs Aluminium sheet 0.5 mm thick, fixed with steel screws to doors shutters complete all as specified and as directed.

M & L for taking out Plants / vegetation, digging out roots, filling cracks/holes with CM 1:2 and levelling off surfaces to match the existing surface on walls, chajjas etc all as specified & directed by Engr-in-Charge.

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

M&L for roof tiles, Mangalore pattern Gde 'AA' interlocking at side joints laid dry complete all as specified and directed.

Fixing only for roof tiles Mangalore pattern interlocking at side joints laid dry (except tiles) complete all as specified and directed.

M&L for Ridge or hip tiles to suit Mangalore pattern roofing tiles, bedded and jointed in cement mortar 1:6 complete all as specified and directed.

Fixing only ridge or hip tiles to suit Mangalore pattern roofing tiles complete all as specified and directed.

Dismantling battens for tiles shingles etc of any size including tiling fillets exc 15 cm spacing etc complete all as specified

M&L for IInd class HW clean sawn battens exceeding 5 and n. exc 15 sqcm in cross section, spaced at 30cm centres complete all as specified and directed.

Fixing only IInd class HW clean sawn battens at 30cm centres exc 5 and n exc 15 sqcm ( Except batten) complete all as specified and directed.

Dismantling timber scantling in any position (unframed wok) exc 40sqcm in section complete all as specified and directed.

S&F IInd class hard wood timber clean sawn as in scantling complete all as specified and directed.

S&F in repairs IInd class hard wood 20mm thick boarding fixed with nails in any situation planed one side with butt joints complete all as specified and directed.

Dismantling timber scantling unframed in post, rafters, purlins etc under 40 Sqcm in section and M&L for plain fillets of IInd class hard wood exc 13 but n exc 25 sqcm in section square rectangular or triangular in section secured with screwes complete all as specified and directed.

Preparing surfaces of slate battens, any size and spacing prepared and treated all over (measured overall on one side only, spaces not deducted) with two coats creosote complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting in roof covering complete all as specified and directed.

S&F 0.63 mm thick grade 'O', GI corrugated mild steel sheeting with grade 'B' corrugation, zink coating @ 120 GSM inclusive of both side, laid with two corrugation side lap, fixed with 'L' type or 'J' type or cranked hook in roof all as specified.

S&F 0.80mm thick PGI mild steel sheets with zinc coating @ 120 gm/sqm inclusive of both side as in ridge, hips, valley, gutters and straight flashings complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick , 150GSM of any colour having tensile strength of 550 Mpa as in roof covering / ridgesl, fixed with self tapping screws complete all as specified and directed.

M&L for filleting in any position and to any shape in CM 1:3 sectional area exc 25 sqcm but n exc 50 sqcm complete all as specified and directed.

Preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of white wash complete all as specified and directed

Complete removal of existing treatment on wall and applying two coat of white wash on wall complete all as speficied

Preparation of old decorated surfaces of ceiling by brooming down and scrapping whereever necessary and applying one coat of white wash complete all as specified and directed

Preparation of old decorated surfaces of walls by brooming down and scrapping whereever necessary and applying one coat of Oil Bound distemper white or tinted all as specified and directed. Note:- All quantites of Oil bound distemper shall be deposited by the contractor in AGE BR-II store & shall be issued to contractor for painting work on daily basis. A seprate leddger shall be open to maintain record for consumption of material used in work.

Complete removal of existing treatment on wall and applying two coat of Oil Bound distemper over a coat of alkali resistence primer, white or tinted on wall complete all as speficied. Note:- All quantites of Oil bound distemper shall be deposited by the contractor in AGE BR-II store & shall be issued to contractor for painting work on daily basis. A seprate leddger shall be open to maintain record for consumption of material used in work.

Complete removel of existing treatment of walls by scrapping, cleaning by water jet, soffits/facia of chajja/roof slab etc and applying two coat of Apex Ultima Weather shield paint or tinted over a coat of primer etc complete all as specified and directed. Note : Contractor has to give 3 Years Guarantee Certificate, if within guarantee period Apex removes/washout, contractor has to repaint with the Apex. Note:- All quantites of apex ultima weather sheild shall be deposited by the contractor in AGE BR-II store & shall be issued to contractor for painting work on daily basis. A seprate leddger shall be open to maintain record for consumption of material used in work.

M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth and applying one coat of Apex Ultima Weather shield paint. at any height from 0.00 to 12.0 meter from GF level including necessary scafolding complete all as specified and directed. Note:- All quantites of apex ultima weather sheild shall be deposited by the contractor in AGE BR-II store & shall be issued to contractor for painting work on daily basis. A seprate leddger shall be open to maintain record for consumption of material used in work.

M&L for cleaning of Manglore tile roof by scrapping, cleaning by water jet etc and applying two coat of Apex Ultima Weather shield paint or tinted over a coat of primer etc at any height of bldg (0-12 meter) complete all as specified and directed. Note : Contractor has to give 3 Years Guarantee Certificate, if within guarantee period Apex removes/washout, contractor has to repaint with the Apex.

Preparation of old painted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed

Preparation of old painted wooden surfaces exc 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed.

Preparation of old painted steel surfaces of any description exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old work with one or more coats

Preparing old painted wooden surfaces of any description, n.exc 10 cm width or girth and applying one coat of synthetic enamel paint all as directed.

Preparing old painted steel surfaces of any description, n.exc 10 cm width or girth and applying one coat of synthetic enamel paint all as directed.

Preparing old painted concrete or plastered surfaces exc 10 cm width or girth and applying two coats of plastic emulsion paint on walls complete all as specified and directed.

M&L one coat of oil bound distemper on ceiling incl preperation of old plaster surface complete all as specified and directed.

M& L for Two coats of wall care putty, level and smoothen the surface and cure the first coat lightly once it dries apply the second coat of 0.5-1 mm thickness once the first coat is fully dried and set. The thickness of each coat should not exceed 1mm and total thickness of putty should not be more than 2mm complete all as specified and directed.

M& L for One coat of wall care putty, level and smoothen the surface, apply the putty of 0.5-1 mm thickness complete all as specified and directed.

M&L for preparation of old painted steel surfaces exc 10cm width or girth and applying two coat of aluminium paint complete all as specified and directed.

M & L for preparing plastered/un-plastered old decorate surfaces of walls or pillars, cornices/ roof by brooming down or steel wire brushing, scrubbing down smoke spots mould moss and efflorescent, salts, trading oil and grease spots of cornices and applying one coat of cement base paint at any height from 0.00 to 12.0 meter from GF level including necessary scafolding complete all as specified and as directed by Engineer in charge .

M & L for preparing plastered/un-plastered old decorate surfaces of walls or pillars, cornices/ roof by brooming down or steel wire brushing, scrubbing down smoke spots mould moss and efflorescent, salts, trading oil and grease spots of cornices and applying two coat of cement base paint at any height from 0.00 to 12.0 meter from GF level including necessary scafolding & Complete removal of existing treatment on wall complete all as specified and as directed by Engineer in charge .

Writing letters on PVC coloured sheet of size 450mm x 200mm x 6mm thick, Writing letters / Numerical as directed by Engineer-in-Charge and fixing to Building with screws 4No Each, Any height of Building upto 12m height, size of letter 80 x 125mm with Max of 4 letters complete all as specified and as directed.

M&L for applying Asian paints SmartCare Damp proof Ultra on the wall, chajja suface.The application method is as follows:- a) In the existing surface, the substrate must be checked for its soundness, damaged portions & hollow areas must be repaired with Polymer modified mortar. b) Small cracks 3mm or less should be open out, cleaned & filled with AP smart care Crack Seal & wider cracks should be filled with Polymer modified mortar. All corners and joints of drain pipes, hannels etc. must be treated with polymer modified mortar prior to coating application. Ensure that the coating is applied at least 6 inch inside the drain pipe. c) Apply self-priming coat (3 Part Asian paints SmartCare Damp proof Ultra and 1 Part Water) and Allow to dry for at least 3-4 hrs prior to application of subsequent coat. d) Apply two coats of Apex Ultima Weather shield paint

M&L for rendering 10mm (In patces area n exc 5 Sqm)thick in cement mortar (1:6) on fair faces of brick/concrete surfaces sagol finish at any height from 0.00 to 12.0 meter from GF level including necessary scafolding including taking down cement plaster all as specified and as directed.

M&L for rendering 15 mm thick in (In patces area n exc 5 Sqm)CM(1:4) on fair faces of brick/concrete surfaces sponge finish at any height from 0.00 to 12.0 meter from GF level including necessary scafolding including taking down cement plaster all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete incl demolition of Brick work, solid block or stone masonry built in cement mortar or cement lime mortar all as specified & directed by Engr-in-Charge

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick/concrete surfaces sagol finish cement plaster all as specified and as directed.

M&L for rendering 15 mm thick in CM(1:4) on fair faces of brick/concrete surfaces sponge finish cement plaster all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces

Prepration of newly plastered sureface and applying two coat oil bound distemper complete all as specified and as directed.