SITC of Laboratory Fume Hood

Fumehood and Accessories :

PP CUPSINK 3x6x4

FUMEHOOD MICROPROCESSOR BASED AIRFLOW MONITOR AND ALARM -VERTICAL - C/W SM7 SENSOR, SUITABLE POWER ADAPTOR

REAR SCRIBE-18Hx00Dx5L, H=HEIGHT UP TO FALSE CEILING

REAR SCRIBE-35Hx00Dx18L

REAR SCRIBE - 57Hx00Dx05L

BASE MOLDING 4 FT.

FUMEHOOD ELECTRICAL SYSTEM-2+2 NOS 6/16A SOCKETS WITH SWITCH, 1 NO 4FT NON-FLAME PROOF LIGHT FIXTURE ALONG WITH LED & 15 INTENSITY WITH 3 COLOR SETTINGS CONTROL SWITCH, 1 No FUMEHOOD DB AND INTERNAL WIRING WITHIN THE HOOD

FUMEHOOD FRONT CONTROL VALVE FOR COMPRESSED AIR

FUMEHOOD FRONT CONTROL VALVE FOR NITROGEN

FRONT CONTROL VALVE FOR RAW WATER

FUMEHOOD FRONT CONTROL VALVE FOR VACUUM

FUMEHOOD SS304 INTERNAL TUBING UNTIL 150MM ABOVE THE HOOD WITH CAPPED END (1/2 FOR RW, VA, 1/2 WITH INSULATION CWI, CWO, 1/4 FOR N2, CA)

BASE UNIT FH SOLVENT 2 DOOR-35Hx22Dx36L

BASE UNIT FH ACID 2 DOOR-35Hx22Dx36L

FLOOR STANDING WORKTOP SUPPORT OF SIZE: 36Hx08L

6 FEET BENCHTOP HOOD, COMBINATION SASH, SASH OPENING 28", 30" INTERNAL DEPTH, 72" LENGTH, PHENOLIC RESIN LINER, WITH INSERT TYPE WORKTOP

6 FT FUMEHOOD CEILING ENCLOSURE WITH ACCESS DOOR, SIZE:18H x 30D x 72L, CF=FOR COMBINATION SASH HOOD, H=HEIGHT UP TO FALSE CEILING

EPOXY LATTICE ASSMBLY FOR 6’ BENCHTOP FUMEHOOD

6 FEET BENCH TOP FUMEHOOD INSERT TYPE GRANITE WORKTOP.

Centrifugal Blowers and Motor:- Medium Pressure Direct Driven PP Centrifugal Blower CMVeco315/280 (1600-2600cfm @ 30-140mm static), with clamp adapter, Electro galvanized stand base frame and fasteners. Refer Cluster details.

G1 M8x50 bolts with nuts & washer (Motor and Blower pedestal)

Vibration Isolators for CMMV-315/280

M10x100 pin type anchor fasteners

Motor 3.7KW/2P(5HP/2P) TEFC B5/Flange mounted 3phase 50Hz, IE2.Terminal box should be on top side. Motor Shall be compatible for VFD Operation. Refer Cluster details.

PP Weather cowl Dia 350 mm. (1.48 sqm).

MS Stack support for CMVeco-315/280 Model, (Kg: - 90 Kgs ).

Motor Guard with accessories for 5HP, refer motor capacity.

25x25x14g thk PP Bird mesh for dia 250 mm Bypass end connection, refer drawing.

Dia 315 mm and 3mm thickness PVC Transparent flexible connection for inlet & outlet of the blower, refer cluster details.

PP-FRP Ducting and Accessories - PP-FRP ducting using 3mm thick PPGL sheets 3 mm thick FRP lining using isothelic resin including flanges & bends, gasket, support with threaded rod, clamps, anchor fasteners, washer nuts and bolts and UV resistant painting.

MS Support for Ducts like threded rod,anchor bolts,c-chanels, clamps,angles,bolts & nuts. Inside lab, within Shaft & outside the building.

PP moulded 300mm dia. single leaf Butterfly Manual damper with Both side flanges.Refer drawing.

PP moulded 250mm dia. single leaf Butterfly Manual damper with Both side flanges.Refer drawing.

Fumehood Base cabinet vent connection & Accessories

40 mm PP Slip x Slip x Slip Tee

40mm CTS Slip x MPT Male Adapter 2" with Chuck Nut

40mm CTS 90-Degree Slip x Slip Elbow

40mm. x 3000mm PP Exhaust Pipe

Bidder Name

Kewaunee Labway India Pvt Ltd