WELCOME MAINT OF B/R WORKS TO MD ACCN AND REPAIRS TO PCC HARD STANDING, CHEQURED TILES, INTERLOCKING TILES UNDER AGE B/R-II OF GE (W) AGRA

Amount

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed

Taking down cement plaster of any description on brick, concrete, ceiling surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks, old size straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified and directed.

All as item No 4 above but except bricks.

M&L for 10mm thick rendering on concrete surfaces of ceiling in CM 1:4, finished the surface even & smooth complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:6 on brick surfaces of walls & finishing the surface even & smooth complete all as specified and directed.

M&L for 15mm thick plastering rendering in CM 1:4 on brick or concrete surface with integral water proofing compound as per manufacturer instruction finished fair complete all as specified and directed at any location in any area incl repairing in patches at parapet, facing, fins, etc incl scaffolding, if any, required at site for entire completion of work all as specified and directed by Engr-in-Charge. Note : Integral water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

Supply only integral water proofing compound

M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed block hold fast etc complete all as specified and directed

M&L for 50 mm thick cement concrete type C1, 1:3:6 (using 20 mm graded stone aggregate) in plinth protection including necessary joints duly filled with bituman mastic filling etc , finish the surface even & smooth without using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Roughening surfaces of old concrete floor by picking, sweeping, clean and washing down with water to remove dust etc including brushing neat cement slurry with 3 Kg of cement per Sqm complete all as specified and directed

M&L for non-skid coloured ceramic tiles (1st quality/ premium quality) 7 to 8mm thick, (square/rectangular) area of each tile exc 0 .06 Sqm but not exc 11 Sqm as in floors set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for non-skid coloured ceramic joint free tiles (1st quality/premium quality) 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tiles as in floor over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic light or any shade tiles 10mm thick (square /rectangular), polished (Ist quality/Premium quality), area of each tiles n' exc 0.36 Sqm in floors etc, laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed

M&L for vitrified ceramic light or any shade tiles 10mm thick (square /rectangular), polished (Ist quality/Premium quality), area of each tiles n' exc 0.36 Sqm in vertical surfaces etc, laid over and including 10 mm thick rendering in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed

M & L for glazed ceramic coloured tiles joint free of size 300 x 200 x 7 mm (Ist quality/Premium quality), in vertical surfaces such as riser of steps, skirting, dado and pillar, over and including 10mm thick rendering as bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling PVC water tanks 500 ltrs capacity and S&F 500 ltrs capacity rotational moulded polyethylene water storage tank triple layered ISI mark (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

Dismantling PVC water tanks 1000 ltrs capacity. and S&F 1000 ltrs capacity rotational moulded polyethylene water storage tank triple layered ISI mark (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed.

S&F 20mm ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight - 210 gm) complete all as specified and directed.

All as per item No. 20 above but as in repair.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

All as per item No 22 above but 20mm bore

S & F 15mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

All as per item No. 24 here-in-before but 20mm bore.

Refixing old 15mm bore GI tubes medium grade, galvanised with all fittings andconnected to new or old positions complete to walls and ceiling or laid in floors.

Refixing old 20 mm bore GI tubes medium grade, galvanised with all fittings andconnected to new or old positions complete to walls and ceiling or laid in floors.

S&F in repairs 15mm bore bib taps, cast copper alloy chromium plated long body fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore pipe complete all as specified and directed.

S&F in repair 15mm bore angle valve, cast copper alloy, CP with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule for 15mm bore pipe complete all as specified and directed.

S&F in repairs 15 mm bore pillar taps, cast Copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed

S&F 32 mm bore HDPE pipe as in waste pipes for sinks,wash basin with fitting etc.in repairs complete all as specified and directed

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified & directed.

S&F in repairs White Vitreous china European wash down water closet pan fixing with bolts including connecting to 100mm bore CI ‘P’ or ‘S’ trap fixed as in repairs.

S&F fixed in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices complete all as specified and directed.

S&F in repair vitreous China white squatting pan ‘Orissa’ pattern, size 580 x 440mm with integral foot rests including PVC ‘P’ or ‘S’ trap, front or back inlet connections to trap and to flushing pipe etc. set trap in and including concrete complete all as specified and directed

Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) in repairs

S&F in repair PVC Jet spray 15mm bore suitable for EWC complete all as specified and directed.

S&F in repair CP Health faucet 15mm bore complete all as specified and directed.

S&F in repairs Soap dish, any type, fixed to plugs with stainless steel screws

S&F in repair sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F in repair mirror cabinet PTMT size 350x445 mm Make Shakti/Prayag.

S&F in repair staimless steel plate rack of size 750x600x230 mm fixed to wall complete all as specified and directed.

S&F in repair 15mm bore brass chromium plated (CP) wall mixer for mixing hot & cold water, screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair vitreous China wash basin, white, flat back, size 550x400mm excluding taps, chain & plug and porcelain stopper but including waste fitting & brackets, cutting for and pinning ends of brackets complete all as specified and directed.

S&F in repair 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repairs kitchen sink made of stainless steel 1mm thick with plugs, washers and wasts pipe including bedding in cement mortar on to dwarf wall or including supply & fix cast iron cantilever brackets and connecting union to pipe, overall size 495mm x 420 mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed.

S&F in repairs kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and wasts pipe including bedding in cement mortar on to dwarf wall or including supply & fix cast iron cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410mm x 330mm x 160 mm complete all as specified and directed.

S&F in repair PTMT waste coupling (half/full threaded) 32mm bore suitable for kitchen sink, basin etc with long screw shanks and fly nuts, flange end bedded in red lead complete all as specified and directed

S&F in repair 100mm dia PTMT grating (min weight 25 Gms) complete all as specified and directed

S&F in repair mild steel PVC coated drapery rods, 20mm internal diameter including decorative type brackets including fixing arrangement with drilling holes in walls, brackets etc quality and colour as approved by Engineer-in-Charge complete all as specified and directed

S&F in repair 15mm bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight -90gms) complete all as specified and directed.

S&F in repair 15mm bore Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight-110gms) complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight -90gms) complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) n.exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) exc 1.5 Sqm but n. exc. 4 sqm each complete all as specified and directed.

Taking down shutters of any description exc. 1 sqm but n.exc 2 Sqm each complete all as specified and directed.

Taking down shutters of any description n.exc 1 Sqm each complete all as specified and directed.

M&L for rolled mild steel Framed work as in doors or Gates or as in chowkats of angle or other section quality confirming to Fe-410-W(Gde E-250 quality-A), complete all as specified and directed.

S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood (Hollock / Binteak / Sal / Bijasal ) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitered beads for securing glass etc; size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a); supplied and fixed to chowkats, complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood (Hollock / Benteak / Sal / Bijasal ) plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneering on both faces, kiln seasoned and chemically pressure treated, size of rails and stiles as per IS:1003 (part-I) complete all as specified and directed.

S&F 200mm long Aluminium anodised barrel tower bolt complete all as specified and directed.

S&F in repair 100mm long Aluminium anodised barrel tower bolt complete all as specified and directed.

S&F 300 mm long Aluminium sliding door bolts with hasp staole (bolt type) and fixing clips of sheet cast or extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F 100 mm long mild steel butt hinges medium weight cold rolled fixed with screws complete all as specified and directed.

S&F 150mm size aluminium alloy, anodised handles, cast type complete all as specified and directed.

S & F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S & F as in repairs galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified in clause No. 8B.2 at Sl page No. 174 of SSR 2020 respectively and as directed.

M & L for 100mm size stainless steel butt hinges complete all as specified and directed .

S&F solid PVC frame of size 50x47mm made out of 5mm plain coloured PVC sheet reinforced with MS square tube supplying & fixing in opening as specified in clause No. 8B.3 at Sl page No. 145 and shown in drawing on sl page No 160 of SSR 2010 respectively and as directed.

S & F in repairs steel windows with side hung shutters including box type hinges with Z section steel handle, hod fast and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed

S & F in repairs steel windows with side hung shutters including box type hinges with Z section steel handle, hold fast and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

S & F in repairs steel ventilator with top hung shutters including box type hinges and steel peg stay,locally fabricated complete all as specified and directed

S & F in repairs Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged in to spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings, frame work of water tanks, and similar work conforming to Fe-290 Gde-165 complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete fixed in repairs incl hacking out old broken glass all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane complete fixed in repairs incl hacking out old broken glass all as specified and directed.

Cleaning and removing all scale and dirt etc from over head water storage tanks of capacity 500 liters including cleaning the mouths of circulating pipes complete all as specified including washing the tank with bleaching powder and writting the date of cleaning on outer wall of tank with synthetic enamel paint.

Cleaning and removing all scale and dirt etc from over head water storage tanks of capacity 1000 liters including cleaning the mouths of circulating pipes complete all as specified including washing the tank with bleaching powder and writting the date of cleaning on outer wall of tank with synthetic enamel paint.

M&L for two coats of oil bound distemper on wall surfaces over a coat of 1mm thick Birla putty on newly plastered surfaces walls incl preparation of surfaces complete all as specified and directed.

M&L for complete removal of existing treatment on old plastered or unplastered surface including preparation of surface of walls and applying two coat of distemper oil emulsion (washable) on wall over 1mm thick birla putty complete all as specified and directed

M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.

M&L for applying one coat of oil emulsion distemper on old decorated wall surfaces including preparation.

M&L for preparation of old plastered or un-plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.

M&L for applying three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered or un-plastered surfaces of walls and applying one coat of cement base paint on old decorated surfaces complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of pink primer including preparation of new wooden surface over 10 cm width or girth, not otherwise described complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface exc.10 cm width or girth, complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down of old precast interlocking paver block,chequered tiles any size and shape any description and in any position complete all as specified and directed.

M&L, for broken stone or bouldres hardcore of gauge n.exc 63 mm deposited spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surface for leveling and slop mainting

M&L PCC 75 mm thick (1:4:8) type C-2( using 40 mm graded aggregate) as in sub base.

M&L for 25 mm thick crushed sand cushion layer for laying interlocking pavers complete all as specified and directed.

M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cusion shall be measured & paid separately

Demolition of PCC Kerb stone any size and shape any description and in any position complete all as specified and directed.

M&L for precast cement concrete type B1,1:2:4(using 20 mm graded stone aggregate) as in moulded kerb stone of size as directed including jointed, pointed in cement mortar 1:4 embeding in the ground to a depth as indicated, taping earth around kerb stone and also removing surplus soil etc complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer in CM (1:6) for laying kerb stone complete all as specified and directed.

M&L for PCC 1:2:4 type B1using 20 mm graded stone aggreagates as in side suport of kerb stone or retaining walls any thicknes size and shape including necessary form work complete all as specified and directed.

M&L preparation of newly concrete surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of priming paints plaster coat including one coat of putty etc. complete all as specified and directed. .

M&L preparation of old concrete surfaces of any description over 10cm girth or width not otherwise described and applying one coats of synthetic enamel paint (any tint) complete all as specified and directed.

Demolition Cement concrete (unreinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level)

M&L PCC 40 mm thick (1:2:4) type B-1 using 20 mm graded aggregate as in flooring,finished surface even& smooth with using extra cement.

M&L forming construction joint 30 mm deep 10 mm wide saw cut filled with sealing compound grade A.

M&L forming dummy joint 30 mm deep 10 mm wide saw cut filled with seling compound grade A.

M&L prepolished, machine pressed chequred cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick, set, jointed and pointed in neat cement slurry with mixer of white cement &pigment as in floors / pavements / paths. paths laid over screed bed or bedding layer in cement mortar 1:4, 20 mm thick for laying floor finishes.

Messars Maa Devi Construction Co.

M/s S. K. Construction Co.

M/s UNITED ENGINEERS

R.S BUILDERS

M/S RISHI RAJ AGRAWAL

VAKRATUNDA CONSTRUCTION CO

SahaDevSingh Constructions

scjha&sons

MNR ASSOCIATES

3Krishna Enterprises

M/S SKY CONSTRUCTION

M/S RAJESH ENTERPRISES

VISHESH BUILDERS