SPECIAL REPAIRS TO BLDG No P VIII AND VIII I BAKERY LINE AT ASC WELLINGTON UNDER GE WELLINGTON

Taking down cement or cement lime plaster, any description on brick walls or on concrete surfaces including raking out joints, hacking for key, scrubbing down with water, etc, and removing same from the site(s), complete all as specified and as directed.

Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces in walls finished even and smooth without using extra cement all as specified and directed

Rendering 15 mm thick in two layers on stone masonry surfaces or surface other than fair face of brickwork in cement mortar 1:4 finished even and smooth (without using extra cement) mixed with water proofing compound complete all as specified and as directed. Note: 1. WPC shall be measured and paid separately.

Supply only liquid water proofing compound all as specified and directed.

Demolition of (unreinforced) cement Concrete of any description and in any position including padding concrete and removing debris all as specified and directed.

25mm thick Plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in floor all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed.

Machine cut kota stone slab flooring/ cills mirror polished 20-25mm thick over and including 20mm thick cement screed base laid in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror finish, complete all as specified and directed.

Machine cut polished kota stone slab 20-25mm thick over cement screed base as in riser, skirting, dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.

Coloured Glazed ceramic tiles in vertical surfaces 450x350x7mm/ 350x250x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick plaster as backing coat in cement mortar 1:4 on fair face of brick or concrete surface

Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 15mm thick screed bed or bedding layer of mortar in cement mortar 1:4 complete all as specified and as directed.

Coloured Non - skid Ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado/ Skirting etc. and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the surface over and including 10mm thick rendering as backing coat in cement mortar 1:4 complete all as specified and as directed.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each all as specified and directed.

2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed.

35mm thick second class hardwood glazed and skeleton door shutters open rebated and prepared to receive glass, gauze etc, (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of members of shutter as specified in SSR Part-I section 8, clause 8.24 (b) supplied and fitted to chowkats complete all as specified and directed.

Sheet glass 4 mm thick ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

Complete removal of existing treatment of wall surfaces and applying one coats of primer (water thinable/ solvent thinable) over and including one coat of putty in two layers 3mm thick even and smooth and applying two coats of oil bound emulsion distemper (washable) complete all as specified and directed.

Applying two coats of distemper oil emulsion over a coat of primer and including a coat of wall care putty 3mm thick in two layers on newly plastered wall surface including preparation all as specified and directed.

Preparation of new plastered surfaces of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS - 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces complete all as specified and as directed.

Complete removal of existing treatment for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed.

Demolition of Brickwork, stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:6 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed

Rendering 15mm thick on fair faces of brick / concrete / RR masonry surfaces in cement mortar 1:4 and finished even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete reinforced in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) all as specified and directed.

Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete all as specified and directed.

Plain cement concrete in surface channels and drains of type B2, 1:2:4 using 40mm graded stone aggregate complete all as specified and directed.

Precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in cement mortar 1:6 complete all as specified and directed. Note :- Reinforcement shall be measured and paid separately.

Mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 300 mm internal dia of pipe complete all as specified and directed.

Concrete bed to drain pipes including packing under and haunching against the sides of the pipes after they are laid and tested in cement concrete 1:3:6 type C-2 using 40mm graded aggregate for 150mm bore pipe all as specified and directed.

Dismantling of plain/ corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling of Wrought iron or Mild steel work of any description not otherwise provided for such as fencing posts, gates, roof truss etc complete all as specified and directed.

Mild steel works in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle) including distance pieces, cleats etc.of grade Fe-410-W (Gde-E-250) quality-A all as specified and directed.

Mild steel screw bolts (machine made) with hexagonal or square head at one ends and screwed the other ends, or screwed both ends, each screwed ends, to be fitted with washers and one hexagonal or square nut not exceeding 5cm long, diameter of shank 5 to 10mm, complete all as specified and directed.

Preparation of new or untreated steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed.

Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet as in ridge of 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed.

Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Preparation of old painted wooden surfaces and wood based materials of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint all as specified and directed.

Mild steel Framed work such as grill, grating etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, barred iron door, ladders, framed balusters walk ways, railings, framework of water tanks and simialr work conforming to Fe290 Gde E-165 all as specified and directed.

Preparation of old painted steel surfaces and steel based materials of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

Bands, straps, supports or stays for rainwater, ventilating pipes including bolts, if requried hooks (stay), heavy for large gates, hook and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde E-165 all as specified and as directed.

PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses, etc and similar work including necessary form work and weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removing from site all as specified and directed

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removing from site all as specified and directed

Supply, laying and testing steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified of size 15 mm bore.

Supply, laying and testing steel water tubing medium grade galvanized with all GI fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor including cutting and chasing and making good with all fitttings complete all as specified of size 20 mm bore.

Vitreous china wash down water closet pan (pedestal pattern) white with P or S trap incl flushing pipe , seat and PVC seat cover (white) closed pattern with flat bottom & cover brass chromium plated hinging device, incl connection to drain and to flushing pipe, antisyhonage pipe etc and including fixed in repairs complete all as specified and directed.

PVC low level flushing cistern 10 litres capacity, valveless, syphonic action type, white, with inlet ball valve, float and handle including connecting to bracket etc fixed in repairs complete all as specified and directed.

Vitreous china wash basin, white, flat back, size 550mm x 400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, with and including brass chromium plated perforated waste coupling / fittings 32mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, PVC waste pipe of 32mm bore and of suitable length, 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and PVC connection 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Bib tap fancy type long body chromium plated 15mm dia complete including fixed in repairs all as specified and directed

Stop valve cast copper alloy, 15mm bore screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type chromium plated ,15mm bore including fixed in repair all as specified and directed

PVC connections 15mm size with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position including fixed in repairs complete all as specified and directed.

Sheet Glass shelves assembly corner consisting of 5.5mm thick sheet glass shelf 12cm wide with chroumium plated bracket guard and railing 60cm long fixed in repair complete all as specified and directed.

Supply and fix in repairs of Chromium plated soap dish complete all as specified and directed.

Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges including fixed in repairs all as specified and directed.

PVC (SWR) floor/ Nahani trap 75mm outer dia, plain with grating including jointing to waste pipe with solvent cement all as specified and as directed.

Gratings 125mm dia with / without waste hole, fixed in repairs complete all as specified and as directed.

Aluminium handles, fabricated, anodised 150 mm long complete all as specified and directed.

250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Butt hinges, 100 mm size medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

Floor door stopper of aluminium alloy body 150mm and tongue, anodised with hard drawn steel spring fixed in floor all as specified and directed.

Floor door stopper, with 150 mm long cover plate, of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor including fixed in repairs all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section 150 mm long fixed in repairs all as specified and directed.

Solid PVC door frame of size 50mmx47mm made out of 5mm wood grain printed PVC sheet & edges will be plain colour PVC sheet reinforced with MS Square tube,supplying and fixing in opening as per specification and drawing all as specified and directed.

Factory made solid panel PVC door shutter 30mm (Stile) consisting of frame made out of M.S tubes for top and bottom rails M.S frame made up of tubes shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame all as mentioned in SSR drawing all as specified and directed.

French polishing to old wooden surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats all as till achieving a finished surface complete all as specified and as directed.

Fancy type decorative drapray rod 20 mm dia including side caps and brackets, as in repairs complete all as specified and directed.

75mm thick plain Cement concrete type C-2 , 1:3:6, using 20 mm graded stone aggregate as in plinth protection and hard standing finish even and fair complete all as specified and directed.

75mm thick PCC (1:4:8) type D2 using 40mm graded stone aggregate as in sub base floor and finished even and fair complete all as specified and directed.

Chequred cement concrete coloured tiles 30cms x 30cms x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors, steps etc over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

Anodised aluminium frame powder coated for doors, windows ventilators, with one or more rebates including joining cleat for fixing etc., and repairs complete all as specified and directed.

9mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with srews to aluminium frame work in repair complete all as specified and directed.

Taking down aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc, and making good disturbed surfaces with smooth finish matching with the existing surface of walls, floors, etc. and with existing colour all as specified and directed.

Material and labour for Point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, sheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit suitable for modular controled point wiring complete with conduit fittings/ accessories including 1.5 sqmm FRLS grade PVC insulated sheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP all as specified and directed. Note: 1. Sunken box/ Cover plate for modular plate for modular switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate. 2. Cutting chases in stone masonry wall will be measured and paid separately.

All as per Item No 76 hereinbefore but One 3 pin 5 Amps socket outlet on independent Board with cable 1.5 Sqmm size all as specified and directed.

All as per Item No 76 hereinbefore but point wiring complete with 2.5 sqmm FRLS cable for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.

Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed.

Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed.

Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed.

Modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module all as specified and directed.

Modular Metal Flush Box 1/2 module all as specified and directed.

Modular Metal Flush Box 3 module all as specified and directed.

Modular Metal Flush Box 6 module all as specified and directed.

Modular White Cover Plate With Frame, 1 module all as specified and directed.

Modular White Cover Plate With Frame, 2 module all as specified and directed.

Modular White Cover Plate With Frame, 3 module all as specified and directed.

Modular White Cover Plate With Frame, 6 module all as specified and directed.

Taking down old unservicable FTL Fittings, Supply and fix 25W LED 125 Lum/Watts 4ft batten comprises of thermally conductive material pre-wired with high efficiency electronic driver, high translucent serrated milky white diffuser gets glare free, smooth light distribution lamp colour white all as specified and directed. Make. Havells Cat Part No. LHEXAWPN71N1W025 or equivalent in CG/ Philips/ Bajaj

Taking down old unservicable LED dimmable LED panel size 595mmx595mm, 40watt, 6000K, 100 Watts/ Luman, 220V AC surface mounted type with high efficiency PMMA diffuser soft glare free light coplete with drivers, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Luker Product code- LPS40/ Halonix Code- HLFPR22-11-40-CW-37mm-WC or equivalent in Havells

Taking down old unservicable, Supply and fixing round shape 30 watt 220 volts AC 6500K lumen output 2400, 30 cm dia ceiling type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Luker Product code- LNPR30 or equivalent in Halonix/ Havells

GI Pipe Medium Grade 32 mm bore bracket of suitable size bent to shape of not less than 1.2m long with clamp made of GI flat Iron of size 32 x 6mm for street light fittings, duly painted with one coat of red oxide primer and two coats of aluminium based paint, fixed on poles with bolts, nuts and washers including taking down old brackets complete all as specified and directed.

Taking down old unserviceable street light at any height Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. Make:Make- Halonix Product code- HLSLD-E1-36-CWDL-R01 / Panasonic - PSTM29358R1 / HAVELLS - LHETAXU7PN6J045

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB SPN 8 way 240 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fix exhaust fan steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers including making opening brick/ ston masanory wall as per requirement of Exhaust fan and make good and matching with existing surface complete all as specified and directed.

Taking down unserviceable DBs with MCBs and Supply and fix MCB DB TPN 6 way 415 volts, double door type with minimum capacity of 200 Amps rated bus bar including necessary dummy plate and necessary civil works all as specified and directed.

Supply and fixing amp rating 415 V, 10 KA 'C' curve miniature circuit breaker (MCB) of TPN 415V 40 to 100 Amps capacity all as specified and directed.

240V, 10KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 32 AMPs SPN in the MCB DB complete with connection testing and commissioning all as specified and directed.

All as per item No 25 hereinbefore but SP 6 to 32 Amps capacity all as specified and directed.

Taking down Submain wiring with aluminium conductor along with PVC Conduit and Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 6 sqmm, multistranded along with FRLS grade PVC insulated copper earth continuity conductor 6 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings all as specified and directed. Note: 3 runs of cable and one run of conduit pipe together measured as one RM

Earthing complete with galvanized steel earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the platee not less than 1.5 mtr below normal ground level, connected to galvanized earth wire of size 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical platee No 3 connected to earth testing point including necessary excavation, earth work, PCC pit ,RCC cover 1:2:4 B1 with 8 mm dia MS bars at 100 c/c, funnel, watering pipe etc. all as specified and directed including testing on completion and taking down old earthing material.

Cutting chases in stone masonry wall/concrete floor/roof for laying PVC conduit and making good to facings where required and pointing in cement mortar 1:3, and making good, cutting not exc 10cm girth all as specified and directed.

Schedule of Credit (Minus) Rs. 94488.00 NOTE: Bidder shall insert credit amount of Rs. 94488.00 as rate in Green field under Col-5.

Please Enable Macros to View BoQ information