Construction of Ladies toilet and Lecture platform with Galvalume sheet roofing near NCC building in NITK

Amount

Demolishing cement concrete: Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.- in all the floor levels

PCC:1:3:6 :Providing and laying in position plain cement oncrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications.- Mix 1:3:6 (M10) using 20mm nominal size graded crushed coarse aggregates.

Coursed rubble masonry : Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications

Filling available excavated earth: Filling available excavated earth (excluding rock) in sides of foundations up to plinth in layers of not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with all lead and lift including cost of all labours complete as per specifications.

Laterite masonry for Superstructure in CM 1:6: Providing and constructing laterite size stone masonry using clean sieved approved sand including cost and conveyance of all materials, curing charges etc complete as per specifications for Foundation in CM 1:6

Laterite masonry for Superstructure in CM 1:6: Providing and constructing laterite size stone masonry using clean sieved approved sand including cost and conveyance of all materials, curing charges etc complete as per specifications for Superstructure in CM 1:6

C.C.Solid block masonry: Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. – in Fifth floor.

TMT steel reinforcement: Providing Thermo-Mechanically Treated bars of grade Fe-550D or more Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position, binding and anchoring to adjacent members whereever necessary complete as per Design including cost of material, labour, usage charges complete as per specifications. (The laps and wastages shall not be measured separately

RCC M – 20 (CC 1:1.5:3 ) for Beam/lintel: Providing and laying in position Reinforced cement concrete for all Super structures of building, super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, & formwork Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications and excluding cost of steel reinforcement.

RCC M – 20 (CC 1:1.5:3 ) for Slab: Providing and laying in position Reinforced cement concrete for all Super structures of building, super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, & formwork Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications and excluding cost of steel reinforcement.

Pointing: Providing Flush / Ruled/ Struck or weathered pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.

MS Tubular truss, MS -plates, for roofing: Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

Pre-coated Galvanised iron profiled sheet: Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required and as per directions of the Engineer-in-Charge.

Pre coated Ridge plain: Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridge plain (500-600mm)

Pre coated Ridge plain: Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Flashing aprons( up to 600mm)

Precoated galvanised steel sheet Gutter: Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per m2 as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Gutter

20mm thick cement plastering: Providing 20 mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

15mm thick cement plastering: Providing 15 mm cement plaster on the rough side of single or half brick wall of mix: 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

Ceramic tiles: Providing and laying Ceramic antiskid/glazed floor tiles of size 300x300mm or as approved by the Egineer In-charge (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete as per direction of Engineer in charge.- in all the floor levels

Glazed Wall tiles: Providing and fixing 1st quality ceramic glazed wall tiles 6mm thick conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in approved shades and size as approved by Engineer- in- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per m2, including pointing in white cement mixed with pigment of matching shade complete. as per direction of Engineer in charge.

Polished Granite stone flooring: Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.

M-15Grade Precast cement concrete Kerb stones: Supplying and fixig M15 grade precast cement concrete kerb stones for Road way, sidewalls and gutters fixed with CM 1:3 fixed and finished in line as per direction of Engineer in Charge 300x300x150mm

Interlock paver: Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Indian type WC: Providing and fixing white vitreous china clay water closet Orissa / squatting pan pattern of size 580 x 440mm with integral type footrests 100mm S or P trap, 10Ltr low level PVC flushing cistern ( all are approved make) with fittings, C.I / MS brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications.[ Parryware / Hindware / Cera/ equivalent make.

European type water closet : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required and as per direction of Engineer in charge.

Wash basin: Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a single 15mm C.P brass pillar tap, fixed with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, waste pipe, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11[Parryware / Hindware / Cera/ equivalent make.

PVC Door frame: Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size complete as per manufacturers specification & direction of Engineer-in-charge.- in 5th Floor

Factory made Rigid foam both side prelam panelled door shutter: Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer- in-charge fixed to frames with 3 nos of 75mm Stainless steel hinges.- with both side prelam shutters

UPVC louvered ventilator: Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size – 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made

Synthetic enamel paint in two coats on new surface: Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. Asian /Nerolac/ Berger or equivalent Make

Anti-fungus exterior emulsion paint : Providing and applying in two coats Apex Ultima emulsion paint of Asian make/ equivalent Nerolac/ Berger/ Nitco having anti-fungus and water resistance character, of approved colour and shade, over a base coat of apex primer painting/ equivalent primer including scraping the original surface and rubbing with sand paper of zero size, paints of approved colour, providing and removing scaffolding, cleaning of paint stains etc complete

Nosing for Granite slab: Providing half nosing for 18mm thick granite slab using required machinery including cost and conveyance of all materials, labour for all items of work, HOM of equipment, necessary scaffolding etc., complete as per specification.

Primer Coat wall surface: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 g/L as per specifications and as per directions of Engineer in charge. In all the floors

Acrylic emulsion paint – in two coats: Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.- in all the floors

Inspection Chamber: Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thick for fixing CI cover & frame etc. excluding the cost of CI frame and cover.

Water Tank: Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Wall bore: Wall bores in size stone masonry including cost of materials, labour, HOM complete as per specification. – in all the floor levels.

Nahani trap : Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete

CPVC plumbing pipes – 32 mm dia: KSRB: 13.86: Providing and fixing Chlorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc)- 32mm nominal dia pipes – in all the floor levels

CPVC plumbing pipes – 20 mm dia: KSRB: 13.86: Providing and fixing Chlorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. (Concealed work including cutting chases and good the walls etc)- 20mm nominal dia pipes – in all the floor levels

Mirror: Providing and fixing mirror of superior glass of size 453 x 357mm (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing etc. complete in all respect as per directions of Engineer-in-Charge.: in all the floor levels

Aluminium Tower bolts: Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic) coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete.

SS Hinges: Providing and fixing stainless steel fixtures conforming to 304 graded steel as per direction of Engineer in Charge – SS Hinges -125mm size

SS Aldrop: Providing and fixing stainless steel fixtures conforming to 304 graded steel as per direction of Engineer in Charge – SS Aldrop – size 16mm dia 200mm

Hydraulic door closer: Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete

Bidet Spray (Health Faucet set): Providing and fixing JAQUAR/ARK/ equivalent other make Bidet Spray (Health Faucet with tube) including cost of all materials, labour, transportation, taxes etc complete – in all the floor levels

SS Angle cock – 15mm size: Providing and fixing SS angle cock for basin mixer and geyser points of approved quality conforming to IS:8931 – in all the floor levels

UPVC connection pipes 15mm dia: Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. - 15 mm nominal bore with 30cm length – in all the floor levels

SS Bib cock 15mm: Providing and fixing SS Bib cock of 15 mm dia size nominal bore with wall flange made of stainless-steel including cost of all materials, labour, transportation, etc., complete – Jaquar/ARK/ Jal or equivalent make – in all the floor levels

Extension Nipple – Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour – 25mm nominal bore weighing not less than 62grams cost including all the materials labour etc complete as per direction of Engineer-in-charge.

Brass ball valve: Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :25mm nominal bore

Mohammed Azmal

DSOUZA ELECTRICALS

EKADANTHA CONSTRUCTION

BHARATESH V KULAL

CIS GLOBAL INFRATECH PVT LTD

Dheeresh K

KOTIAN ENGINEERING CONSTRUCTION CONTRACTING

KABAKKAR ASSOCIATES