Financial Assistance for Phase Two Construction and Infrastructure development of Shri Narsingh Inter College Mohanpura Ghazipur (UP) Under CSR Activity of ONGC Foundation

Bill of Quantity (BOQ)

S.No Particulers Remarks

2 SANITARY INSTALLATION 844,342.07 23,400.00

3 Electrical Works 1,950,298.00 558,940.00

4 Furniture 10,989,891.16

Smart Class room and 50

Computers for computer lab

6 Lab equipment for science lab 712,110.00

LOCAL AREA NETWORK ( LAN )

SUB Total Amount 42,451,117.07 18,494,014.16

SUB Total Amount 42,451,117.07 18,494,014.16

Grand Total 60,945,131.00

Grand Total 60,945,131.00

NBCC PMC fee @6% 3,656,707.86

Add GST @ 18% on NBCC PMC fee 658,207.41

Digitally signed by Anuvesh

NBCC (India) Limited

(A Govt. of India Enterprise)

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College Mohanpura Ghazipur (UP) Under CSR Activity of ONGC

Bill of Quantity (BOQ)

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate Amount- DSR/NDSR

(A) Earth Work

Earth work in excavation by mechanical means (Hydraulic excavator) / manual

means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan)

including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed

earth to be levelled and neatly dressed.

2.6.1 All kinds of soil Cum. 50.00 177.50 8,875.00

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand

III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived

natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well

and consolidated and grouted with fine sand, including necessary excavation, levelling &

dressing & finishing the top smooth.

Filling available excavated earth(excluding rock) in trenches, plinth, sides of oundations

3 2.25 etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by Cum. 50.00 196.00 9,800.00

ramming and watering, lead up to 50 m and lift upto 1.5 m.

Supplying and filling in plinth with Jamuna and under floors, including

w tering, a m ng, consolidating and dressing complete.

Concrete Work -

Providing and laying in position cement concrete of specified grade excluding the cost

of centering and shuttering - All work up to plinth level :

1:4:8 (1 Cement : 4 coarse sand : 8 graded stone

aggregate 40 mm nominal size).

Providing and laying in position machine batched and machine mixed design mix M-25

grade cement concrete for reinforced cement concrete work, using cement content as

per approved design mix, including pumping of concrete to site of laying but excluding

the cost of centering, shuttering, finishing and reinforcement, including admixtures

11 5.33 in recommended proportions as per IS: 9103 to accelerate, retard setting of -

concrete, improve workability without impairing strength and durability as

per direction of Engineer-in- charge.“(Note :- Cement content considered in this

item is @ 330 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable

i 5.33.1 All works upto plinth level Cum. - 9,504.75 -

ii 5.33.2 All works above plinth level upto floor V level. Cum. 380.00 9,860.40 3,746,952.00

Add for using extra cement in the items of design mix over and above the

specified cement content therein.

Steel reinforcement for R.C.C. work including straightening, cutting,

bending, placing in position and binding all complete upto/above plinth level.

5.22.6 Thermo-Mechanically Treated bars. Kg 74,570.00 107.85 8,042,374.50

Centering and shuttering including strutting, propping etc. and removal of

(i) 5.9.1 Foundations, footings, bases of columns, etc. for mass concrete. Sqm. 120.00 392.15 47,058.00

(ii) 5.9.6 Columns, Pillars, Piers, Abutments, Posts and Struts. Sqm. 750.00 961.30 720,975.00

Suspended floors, roofs, landings, balconies and access platform. with water

proof ply 12 mm thick.

Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water

proof ply 12 mm thick.

Providing and fixing in position 12mm thick bitumen impregnated fiber board conforming

1838, including cost of primer, sealing compound Grade-A in expansion joints.

(vi) 5.29 Providing and fixing sheet covering over expansion joints with iron screws as per design. -

5.29.2 Aluminium fluted strips 3.15 mm thick.

6.0 BRICK WORK -

Brick work with common burnt clay F.P.S. (non modular) bricks of class

designation 7.5 in foundation and plinth in:

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 25.00 7,132.25 178,306.25

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in

16 6.4 superstructure above plinth level up to floor V level -

in all shapes and sizes in :

6.4.2 Cement mortar 1:6 (1 cement : 6 coarse sand) Cum 325.00 9,105.95 2,959,433.75

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class

17 6.13 designation 7.5 in superstructure above plinth level up to floor V -

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 560.00 1,123.80 629,328.00

8.0 MARBLE & GRANITE WORK -

Providing and fixing 18mm thick gang saw cut ( premoulded and prepolished) machine cut

for kitchen platforms, vanity counters, window sills , facias and similar locations of

required size of approved shade, colour and texture laid over 20mm thick base cement

mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed

with matching pigment, epoxy touch ups, including rubbing, curing, moulding and

polishing to edge to give high gloss finish etc. complete at all levels.

8.2.2 Granite of any colour and shade -

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate Amount- DSR/NDSR

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc.,

19 8.3 including machine polishing to edge to give high gloss finish etc. complete as per -

design approved by Engineer-in-Charge.

8.3.2 Granite work metre 10.50 510.95 5,364.98

Extra for fixing marble / granite stone over and above corresponding basic item, in facia

20 8.4 and drops of width upto 150mm with epoxy resin baesd adhesive including metre 10.50 668.55 7,019.78

cleaning etc. complete.

Extra for providing opening of required size & shape for wash basins/ kitchen sink in

kitchen platform, vanity counters and similar location in marble/Granite/Stone work

including necessary holes for pillar taps etc. including rubbing and polishing of cut

edge etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-in-

Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3

(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of matching shade complete.

9 WOOD & PVC WORKS -

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-

decorative type, core of block board construction with frame of 1st class hard wood

and well matched commercial 3 ply veneering with vertical grains or cross bands and

face veneers on both faces of shutters:

35 mm thick including ISI marked Stainless Steel

butt hinges with necessary screws.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm

diameter bolts, nuts and wooden plugs and embedding in cement concrete block

30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm

Providing and fixing aluminium extruded section body tubular type universal hydraulic

door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto

36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment

with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not

less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade,

nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less

26 9.97 than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with -

necessary screws etc. complete :

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less

27 9.100 than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with -

necessary screws etc. complete :

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic

28 9.101 coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour -

and shade, with necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 40.00 59.55 2,382.00

10.0 STEEL WORK -

Providing and fixing pressed steel door frames conforming to IS: 4351,

manufactured from commercial mild steel sheet of 1.60 mm thickness, including

hinges, jamb, lock jamb, bead and if required angle threshold of mild steel

angle of section 50x25 mm, or base ties of 1.60 mm,

pressed mild steel welded or rigidly fixed together by mechanical means,

including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock

strikeplate and shock absorbers as specified and applying a coat of approved steel

primer after pre- treatment of the surface as directed by Engineerin- charge:

10.14.3 Profile E -

10.14.3.1 Fixing with adjustable lugs with split end tail to each jamb. Rmt. 410.00 640.20 262,482.00

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses

etc., including cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer, including welding and bolted with

special shaped washers etc. complete.

10.16.1 Hot finished welded type tubes. Kg. 6,150.00 194.40 1,195,560.00

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing

31 10.25 in position and applying a priming coat of approved steel -

primer using structural steel etc. as required.

In stringers, treads, landings etc. of stair cases, including use of

chequered plate wherever required, all complete.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar

11.0 FLOORING WORK -

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey

cement slurry mixed with pigment to match the shade of the slab, including rubbing and

polishing complete with base of cement mortar 1 :

4 (1 cement : 4 coarse sand) :

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12

mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with

grey cement slurry mixed with pigment to match the shade of the slabs, including

rubbing and polishing complete.

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate Amount- DSR/NDSR

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or

more (thickness to be specified by the manufacturer), of 1st quality conforming to IS :

35 11.40 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Sqm 110.00 1,439.40 158,334.00

Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including

pointing the joints with white cement and matching pigments etc., complete.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by

manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of

approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of

cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/

sqm including grouting the joint with white cement & matching pigments etc.

12.0 ROOFING -

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with

polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet

washers or with G.I. limpet washers filled with white lead, including a coat of approved

37 12.1 steel primer and two coats of approved paint on overlapping of sheets complete (up to any -

pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and

trusses and including cutting to size and shape wherever

12.1.1 1.00mm thick corrugated sheet Sqm 160.00 1,457.15 233,144.00

13.0 FINISHING WORK -

38 13.1 12 mm cement plaster of mix : -

39 13.2 15 mm cement plaster on the rough side of single or half brick wall of mix : -

40 13.16 6 mm cement plaster of mix : -

Extra for plastering done on moulding, cornices or architraves including neat

finish to line and level:

Distempering with oil bound washable distemper of approved brand and

manufacture to give an even shade :

New work (two or more coats) over and including water tinnable priming coat

with cement primer.

43 13.45 Finishing walls with textured exterior paint of required shade : -

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including

priming coat of exterior primer applied @ 2.20kg/10 sqm

Painting with synthetic enamel paint of approved brand and manufacture of

required colour to give an even shade :

Two or more coats on new work over an under coat of suitable shade with

ordinary paint of approved brand and manufacture.

Providing and applying white cement based putty of average thickness 1 mm, of

45 13.80 approved brand and manufacturer, over the plastered wall surface to prepare the Sqm. 5,500.00 156.05 858,275.00

surface even and smooth complete.

48 16.3 Supplying and stacking at site. -

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of

M -30 grade made by block making machine with strong vibratory compaction, of

49 16.68 approved size, design & shape, laid in required colour and pattern over and including Sqm 380.00 972.00 369,360.00

50mm thick compacted bed of coarse sand, filling the joints with line sand

etc. all complete as per the direction of Engineer-in-charge.

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots

and making provision for fixing of fittings wherever required including the cost of EPDM

rubber / neoprene gasket required (Fittings

shall be paid for separately)

Powder coated aluminium (minimum

thickness of powder coating 50 micron)

Providing and laying integral cement based water proofing treatment including

51 22.7 preparation of surface as required for treatment of roofs, -

balconies, terraces etc consisting of following operations:

Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with

water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge

over the RCC slab including adjoining walls upto

300 mm height including cleaning the surface before treatment.

Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115

mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with

water proofing compound conforming to IS :2645 and approved by Engineer- in-

(b) charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) -

admixed with water proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge to required slope and treating similarly the adjoining walls

upto 300 mm height including rounding of junctions of walls and slabs.

After two days of proper curing applying a second coat of cement slurry using

2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement

:4 coarse sand) admixed with water proofing compound conforming to IS :

2645 2645 and approved by Engineer-in-charge

Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4

coarse sand) admixed with water proofing compound conforming to IS

(d) : 2645 and approved by Engineerin- charge including laying glass fibre cloth -

of approved quality in top layer of plaster and finally finishing the surface with trowel

with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.

The whole terrace so finished shall be flooded with water for a minimum period of two

(e ) weeks for curing and for final test. All above operations to be done in order and as -

directed and specified by the Engineer-in-Charge :

With average thickness of 120 mm and minimum thickness at khurra as 65

ALUMINIUM WORK:

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate Amount- DSR/NDSR

Providing and fixing aluminium work for doors, windows, ventilators and partitions with

extruded built up standard tubular sections/ appropriate Z sections and other sections of

approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required

dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and

sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be

smooth, rust free, straight, mitred and jointed mechanically wherever required including

cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel

screws, all complete as per architectural drawings and the directions of Engineer-in-

charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots

21.1.2 and making provision for fixing of fittings wherever required including the cost of

EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS:

1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions

etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in

21.3.2 With float glass panes of 5.5 mm thickness (weight not less than 12.50 kg/ sqm) sqm 100.00 1,505.25 150,525.00

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by

providing weather silicon sealant over backer rod of approved quality as per architectural

drawings and direction of Engineer-in-charge complete.

21.8.1 Upto 5 mm depth and 5 mm width metre 250.00 96.75 24,187.50

Providing and fixing aluminium casement windows fastener of required length for

aluminium windows with necessary screws etc. complete.

21.15.1 Anodized (AC 15) aluminium each 44.00 89.40 3,933.60

Rain Water Harvesting & Tubewells -

Boring/drilling bore well of required dia for casing/ strainer pipe, by

suitable method prescribed in IS: 2800 (part I), including collecting samples from

different strata, preparing and submitting strata chart/ bore log, including hire &

running charges of all equipments, tools, plants & machineries required for the job, all

complete as per direction of Engineer-in- charge, upto 90 metre depth below ground

23.1.1 All types of soil -

Supplying, assembling, lowering and fixing in vertical position in bore well,

unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:

53 23.3 12818, including required hire and labour charges, fittings & accessories etc. all -

complete, for all depths, as per direction of

Engineer -in-charge.

23.3.2 200 mm nominal size dia Mtr. - 1,113.35 -

Supplying, assembling, lowering and fixing in vertical position in bore well

unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to

54 23.4 IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all -

depths, as per direction of Engineer-in-

23.4.2 200 mm nominal size dia Mtr - 1,255.70 -

Supplying, filling, spreading & leveling stone boulders of size range 5 cm

55 23.5 to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as Cum. - 1,509.80 -

per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the

56 23.6 recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, Cum. - 1,538.25 -

all complete as per direction of Engineer-in-charge.

Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in

57 23.7 recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as Cum. - 1,538.25 -

per direction of Engineer - incharge.

Gravel packing in tubewell construction in accordance with IS: 4097,

58 23.8 including providing gravel fine/ medium/ coarse, in required grading & sizes as per Cum. - 1,743.01 -

actual requirement, all complete as per direction of Engineer-in-charge.

Total Amount ( DSR ) 39,081,586.00

Total Amount ( DSR ) 39,081,586.00

Providing and fixing of clear glass of 5.9 mm thick in window panels as per requred size

and patterns with all accessaries of aluminium panels .

Supply and application of 2-component acrylic polymer modified cementitious

60 MR-2 waterproofing coating over prepared insulation/screed concrete laid to required slope on Sqm. 65.00 969.00 62,985.00

terrace, wet areas and lift pit, comprising surface preparation, crack/undulation treatment.

Total Amount ( DSR ) 692,325.00

Total Amount ( DSR ) 692,325.00

NBCC (India) Limited

(A Govt. of India Enterprise)

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College Mohanpura Ghazipur

Bill of Quantity (BOQ)

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate

17.0 SANITARY INSTALLATION

17.1 Providing and fixing water

closet squatting pan (Indian

type W.C. pan ) with 100 mm

sand cast Iron P or S trap, 10

litre low level white P.V.C.

flushing cistern, including

flush pipe, with

60 manually controlled device

(handle lever) conforming to

IS : 7231, with all

fittings and fixtures

complete, including cutting

and making good the walls

and floors wherever required:

17.1.1 White Vitreous china Orissa

pattern W.C. pan of size

580x440 mm with Nos.

integral type foot rests.

17.2 Providing and fixing white

vitreous china pedestal type

water closet (European type

W.C. pan) with seat and lid,

10 litre low level white P.V.C.

flushing cistern, including

flush pipe, with

61 manually controlled device -

(handle lever), conforming to

IS : 7231, with all

fittings and fixtures

complete, including cutting

and making good the walls

and floors wherever required:

17.2.1 W.C. pan with ISI marked

wh te solid l s ic seat and 7.00 6,515.55 45,608.85

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate

17.5 Providing and fixing white

vitreous china flat back half

stall urinal of size

580x380x350 mm with white

PVC automatic flushing

cistern, with fittings,

standard size C.P. brass flush

pipe, spreaders with unions

62 and clamps -

(all in C.P. brass) with

waste fitting as per IS : 2556,

C.I. trap with outlet grating

and other couplings in

C.P. brass, including

painting of fittings and

cutting and making good the

walls and floors wherever

17.5.1 Single half stall urinal with 5

litre P.V.C. automatic flushing 5.00 12,071.75 60,358.75

62 17.7 Providing and fixing wash

basin with C.I. brackets,

15 mm C.P. brass pillar

taps, 32 mm C.P. brass

waste of standard pattern, -

including painting of fittings

and brackets, cutting and

making good the walls

wherever require:

17.7.5 White Vitreous China Angle

back wash basin size 600 x

single 15 mm C.P. brass

63 17.31 Providing and fixing

600x450 mm beveled edge

mirror of superior glass

(of approved quality)

complete with 6 mm thick 9.00 1,607.95 14,471.55

hard board ground fixed to Nos.

wooden cleats with C.P.

brass screws and washers

64 17.70 Providing and fixing PTMT

Bottle Trap for Wash basin -

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate

65 17.70.2 Bottle trap 38 mm single piece

moulded with height of 270

mm, effective length of tail

pipe 260 mm from the

centre of the waste

coupling, 77 mm breadth 9.00 367.10 3,303.90

with 25 mm minimum

water seal, weighing not

66 17.71 Providing and fixing PTMT

liquid soap container 109

mm wide, 125 mm high and

112 mm distance from wall

of standard shape with

bracket of the same 9.00 168.35 1,515.15

materials with snap

fittings of approved quality

and colour, weighing

not less than 105 gms

67 17.10 Providing and fixing Stainless

Steel A ISI 304 (18/8) kitchen

sink as per IS:13983 with

C.I. brackets and stainless

steel plug 40 mm, including -

painting of fittings and

brackets, cutting and making

good the walls wherever

17.10.1 Kitchen sink with drain board

17.10.1.1 510x1040 mm bowl depth

68 17.28 Providing and fixing P.V.C.

waste pipe for sink or wash

basin including P.V.C. waste -

fittings complete.

17.28.2 Flexible pipe -

18.0 WATER SUPPLY -

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate

18.7 Providing and fixing

Chlorinated Polyvinyl

Chloride (CPVC) pipes, having

thermal stability for hot &

cold water supply, including

all CPVC plain & brass

threaded fittings, including

fixing the pipe with clamps

69 at 1.00 m spacing. -

This includes jointing of

pipes & fittings with one

step CPVC solvent cement

and testing of joints complete

as per direction of engineer

in Charge.Internal work -

Exposed on wall.

i 18.7.3 25 mm nominal outer dia

ii 18.7.4 32 mm nominal outer dia

iii 18.7.6 50 mm nominal outer dia

18.8 Providing and fixing

Chlorinated Polyvinyl

Chloride (CPVC) pipes, having

thermal stability for hot &

cold water supply, including

all CPVC plain & brass

threaded fittings, i/c fixing

the pipe with clamps at 1.00

m spacing. This includes

70 jointing of pipes & fittings -

with one step CPVC solvent

cement and the cost of cutting

chases and making good the

same including testing of

joints complete as per

direction of Engineer in

Charge.Concealed work,

including cutting chases

and making good the walls

i 18.8.1 15 mm nominal outer dia

ii 18.8.2 20 mm nominal outer dia

iii 18.8.3 25 mm nominal outer dia

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate

18.8.4 32 mm nominal outer dia

71 18.53 Providing and fixing C.P.

brass angle valve for basin

mixer and geyser points of -

approved quality conforming

18.53.1 15 mm nominal bore

72 18.56 Providing and fixing PTMT

pillar cock of approved quality -

18.56.2 15 mm nominal bore, 125 mm

long foam flow, weighing not

less than 120 gms

73 18.74 Providing and fixing

unplasticised P.V.C.

connection pipe with PTMT -

Nuts, collar and

bush of approved quality and

18.74.2 15 mm nominal bore with 45

19.0 DRAINAGE -

19.3 Providing and laying

cement concrete 1:5:10 (1

cement : 5 coarse sand : 10

74 graded stone aggregate 40 -

mm nominal size) up to

haunches of S.W. pipes

including bed concrete as per

standard design :

i 19.3.4 250 mm diameter S.W. pipe

ii 19.3.5 300 mm diameter S.W. pipe

19.6 Providing and laying non-

pressure NP2 class (light

duty) R.C.C. pipes with

collars jointed with stiff

75 mixture of cement mortar in -

the propo i n f 1:2 (1

cement : 2 fine sand)

including test ng of jo n s etc.

i 19.6.3 250 mm dia. R.C.C. pipe

ii 19.6.4 300 mm dia. R.C.C. pipe

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate

76 19.30 Constructing brick

masonry chamber for

underground C.I. inspection

19.30.1 Inside dimensions 455x610

mm and 45 cm deep for single -

19.30.1.1 With common burnt clay

F.P.S. (non modular) bricks

of class designation 18.00 6,937.90 124,882.20

12.41.2 Providing and fixing on

wall face unplasticised Rigid

PVC rain water pipes

conforming to IS : 13592

Type A, including jointing

77 with seal ring conforming to Rmt 150.00 377.40 56,610.00

IS : 5382, leaving 10 mm .

gap for thermal expansion,

Single socketed pipes 110

12.42.1.2 Providing and fixing on wall

face unplasticised - PVC

moulded fittings/ accessories

for unplasticised Rigid PVC

rain water pipes conforming

to IS : 13592 Type A,

78 including jointing with seal -

ring conforming to IS : 5382,

leaving 10 mm gap for

thermal expansion. Coupler

i 12.42.3.2 Single tee with door

ii 12.42.5.2 Bend 87.5° (110 mm bend)

18.48 Providing and placing on

terrace (at all floor levels)

polyethylene water storage

tank, ISI : 12701 marked,

79 suitable locking Ltr 5,000.00 11.00 55,000.00

arrangement and making

necessary holes for inlet,

outlet and overflow pipes

but without fittings and the

base support for tank.

Total Amount ( DSR ) 844,342.07

Total Amount ( DSR ) 844,342.07

S.No 2023 Items Items of Works Unit Boq Qty Rate (DSR) Market Rate

80 MR Supplying and fixing C.I.

cover with frame for

rectangular C.I. cover with

frame (low duty)

Total Amount ( DSR ) 23,400.00

Total Amount ( DSR ) 23,400.00

NBCC (India) Limited

(A Govt. of India Enterprise)

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College Mohanpura Ghazipur (UP) Under CSR Activity of

Bill of Quantity (BOQ)

S.No MR Description of Itens Unit Boq Qty Market Rate

Supply and installation of 2 way 60 watt compact wall speakers as per direction of Engineer-

6 Wall Speaker Incharge No - 9551.50233 -

Supply and installation of i5/ 10th Gen 512 gb 1tb ssdwindows 10 as per direction of Engineer-

Supply and installation of Audio Cable with all acsessories as per direction of Engineer-

8 Cable Incharge No 18.00 3,150.00 56,700.00

9 Cable Supply and installation of Hdmi Cable 10 mtr as per direction of Engineer-Incharge No 18.00 4,120.00 74,160.00

Supply and installation of Audio Cable with all acsessories as per direction of Engineer-

-Built-In Stereo Speakers

-Ambient Light Sensors

11 LED Smart Class / -Write/Erase Whiteboard Functionality NO 18.00 115,000.00 2070000

-Remote Collaboration Cloud conferencing

-Android Smartboard, Windows, Duel OS capable.

-Screen Size: 65ʺ

Desktop (All in One) Desktop PC Set 21.5Inch Matrix LCD ,Turbo speed best for home &office - Windows 11 Pro, Intel, 6500T ( Matrix

1 FHD Monitor with 1 year Warranty), 530 MB Graphics Card, 8 GB DDR-4, 256 GB SSD Mini PC (Black) NO 60.00 46,000.00 2760000

Project: Construction of New School Building as Upgradation of Shri Nrisingh Inter College Mohanpura Ghazipur (UP) Under CSR Activity of ONGC

Bill of Quantity (BOQ)-Furniture

S. No Item Name Description of Items UOM Qty Picture Unit Price Amount

DESK CUM BEANCH 2 SEATER DIMENSIONS:- 1240 x 1130 x 737mm

A) Frame made of 16 gauge, 25mm thick M.S. Round pipe.

B) Under structure / Frame shall be Pipe Powder Coated.

Desk cum C) Top, Seat & Back Made of 18 mm thick Prelaminated Particle Board.

Bench N D) Front Modesty & Books keeping Shelf shall be Made of 18 mm thick Prelaminated Particle

Seater.1240 x Board.

1130 x 757. E) All exposed area covered with 2mm thick PVC edge bending.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

Executive Table SINGLE SEATING of in Prelaminated particle board exterior grade with side

storage unit and drawer.

A) Overall Size Length x Depth x Height : 2100mm x 1800mm x 750mm

B) Leg & Top thickness : Table top and side legs shall be made of 25mm thick of

prelaminated particle board of exterior board.

C) Modesty panel thickness 18mm shall be made of 18mm thick of prelaminated particle

board of exterior board.

D) all exposed area shall be covered with 2mm thick PVC edge bending tape.

E) Material : Prelaminated particle board of exterior grade.

F) Table top finish : as per buyer choice.

G) Storage provided both side (One side unit & One drawer unit).

H) Side table made of PLPB exterior grade of size 900x450x750

I) Lockable Drawer unit size 630mm x 450mm x 400mm.

J) S.S. Handles & superior quality of telescopic channels are used in side rack & drawers.

K) Wire Manger whole shall be provided on the top of Table.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

Back unit made of Prelaminated Particle Board exterior grade. Size 1800x500x750mm

A) Back unit shall be made of PLPB exterior grade 25mm thick top & 18mm under structure.

B) 18mm thick Sliding Doors shall be fixed on aluminium roller based profile.

Back unit C) 18mm thick PLPB shelves shell be provided

NS-3 1800x500x D) 2 nos of superior quality S.S. Handle will be fixed on the sliding doors NO 1.00 16,944.00 16,944.00

750 E) 6 nos of PVC shoe / Buffer shell be fixed under the back cabinet

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

Digitally signed by Anuvesh

S. No Item Name Description of Items UOM Qty Picture Unit Price Amount

Executive Table SINGLE SEATING of in Prelaminated particle board exterior grade with side

storage unit and drawer.

A) Overall Size Length x Depth x Height : 2100mm x 1500mm x 750mm

B) Leg & Top thickness : 25mm.

C) Modesty panel thickness 18mm.

Main Table, D) all exposed area shall be covered with 2mm thick PVC edge bending tape.

ERU & E) Material : Prelaminated particle board of exterior grade.

NS-4 pedestal . F) Table top finish : double Shade. NO 5.00 45,183.00 225,915.00

1500x2100x75 G) Storage provided both side (One side unit & One drawer unit).

0 H) with side table PLPB board exterior grade of size 750x450x750

I) Lockable Drawer unit size 630mm x 450mm x 400mm.

J) Wire Manger whole shall be provided on the top of Table.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

Back unit made of Prelaminated Particle Board exterior grade. Size 1650x500x750mm

A) Back unit shall be made of PLPB exterior grade 25mm thick top & 18mm under structure.

B) 18mm thick Sliding Doors shall be fixed on aluminium roller based profile.

Back unit C) 18mm thick PLPB shelves shell be provided

NS-5 1650x500x750 D) 2 nos of superior quality S.S. Handle will be fixed on the sliding doors NO 5.00 15,814.00 79,070.00

T E) 6 nos of PVC shoe / Buffer shell be fixed under the back cabinet

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

A) L- Shape Work table Single Seating made of Prelaminated Particle Board with pedestal.

B) Frame/ under structure made of M.S. Requtengular Pipe 75mm x 25mm.

C)Powder coated finish Shell be provided for MS structure.

D) 25mm thick PLPB Top & 18mm thick modesty shell be provided rest of body 18mm thick

With Ozone hardware fitting.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

A) 3 Drawer Mobile pedestal made of 18mm thick Prelaminated particle board.

B) S.S Handle & good quality telescopic channels.

C) 40mm wheels shall be provided under structure.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

A) Multipurpose Table top made of Prelaminated particle board exterior grade 25mm thick.

B) Frame shall be made of M.S. Powder coated.

C) 25mm round M.S. Pipe.

NS-8 D) All exposed area covered with 2mm thick PVC edge bending. NO 12.00 9,037.00 108,444.00

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

Digitally signed by Anuvesh

S. No Item Name Description of Items UOM Qty Picture Unit Price Amount

Conference Table.

A) Prelam Particle Board of Exterior Grade used.

B) Two flip top box shall be provided.

C) Top 36mm thick & rest of body 18mm thick.

D) All exposed area covered with 2mm thick PVC edge bending.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

6 Seater Open System Modular workstation with M.S. powder coated Legs, Prelaminated top

of 25mm thick as per colour approved. Workstation having glass partition on top, Mobile

pedestals with Wire Manager on Top and Keyboard.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture PER

products, India SEAT

Workstation Size 5' x 3' with mobile pedestal with wire manager filt cap

Glass Door Glass Door Almirah with four shelves making five compartments duly Powder Coated

Stowell- with locking system having brass lock & steel keys in heavy gauge 20/ 22.

NS-11 916mm(W)x48 quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture No 4.00 18,638.00 74,552.00

6mm(D)x1980 products, India

Providing and installing in position, Single sided book rack

of above mentioned size and approved brand quality and finish complete as per

manufacturer's specifications, approved shop drawings/ sketches and as directed by the

engineer in charge and comprising of base unit of above indicated size made out of rigid

knockdown construction, material shall be CRCA 0.8mm thick. the stack ability shall be

add on units stacked width wise to form a bank of racks having common side panel.

number of adjustable shelf be five with 12 loading levels. Uniformly distributed load

capacity per each shelf is 80 Kg maximum. Shelf back stiffener at the real end of the

shelves shall be provided. these are to support books on the rear side, Label holder amd

range indicator on each main unit for inserting labels.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

LOW BACK REVOLVING STOOL:- high density P.U. in seat, gas lift, without arms

STOOLS Chrome base. Seat & Back support upholstered with superior quality Leatherite.

NS-13 Mch Ht Adj + quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture No 60.00 2,485.00 149,100.00

back Hi Base products, India

Digitally signed by Anuvesh

S. No Item Name Description of Items UOM Qty Picture Unit Price Amount

Medium Back Revolving Chair, the Overall Dimension:- 710W ±10 x 710D ±10 x 930H

min ±10 mm . Seat of Medium back chair is made of 12mm thick hot pressed plywood

pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam

on Seat of D-45 kg/m3 , Back of Medium back chair is made of Injection moulded PP

material structure in Black colour upholstered with Mesh fabric, Seat Size: 490W ±10 x

410D ±10 x 60Thick. ±5 mm , Back Size:- 460W ±10 x 480H ±10 . Mechanism:- Centre

Tilt Mechanism Single point control , Provides maximum adjustability and scope for

PRINCIPLE comfort , Seat & Back are fixed together with arms & whole structure moves together in

NS-14 ROOM one direction , Single/ Upright position locking , Tilt tension knob to loosen or tighten the No 1.00 5,083.00 5,083.00

CHAIR-1 tension according to users body weight . Gas lift:- Lift Used gas lift of 120 mm size of

Class-IV grade , Plastic Gas lift cover . Armrest:- Fixed PP armrest in Black colour, seat &

back connected with arms . Chair Base & Wheels:- Revolving Pedestal metal inserted

PPCP base consists of 5 prongs with 660±5 mm pitch circle diameter, 50mm Dia. Black

Nylon - Twin Wheel Pin castor.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

Medium Back Revolving Chair, the Overall Dimension:- 710W ±10 x 710D ±10 x 930H

min ±10 mm . Seat of Medium back chair is made of 12mm thick hot pressed plywood

pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam

on Seat of D-45 kg/m3 , Back of Medium back chair is made of Injection moulded PP

material structure in Black colour upholstered with Mesh fabric, Seat Size: 490W ±10 x

410D ±10 x 60Thick. ±5 mm , Back Size:- 460W ±10 x 480H ±10 . Mechanism:- Centre

Tilt Mechanism Single point control , Provides maximum adjustability and scope for

comfort , Seat & Back are fixed together with arms & whole structure moves together in

NS-15 CHAIR -2 one direction , Single/ Upright position locking , Tilt tension knob to loosen or tighten the No 3.00 7,342.00 22,026.00

tension according to users body weight . Gas lift:- Lift Used gas lift of 120 mm size of

Class-IV grade , Plastic Gas lift cover . Armrest:- Fixed PP armrest in Black colour, seat &

back connected with arms . Chair Base & Wheels:- Revolving Pedestal metal inserted

PPCP base consists of 5 prongs with 660±5 mm pitch circle diameter, 50mm Dia. Black

Nylon - Twin Wheel Pin castor.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

Fixed Visitor Chair, Overall Dimension:- 560W ±10 x 570D ±10 x 920H ±10 mm . Seat of

Medium back chair is made of 12mm thick hot pressed plywood pasted with PU Moulded

foam with Fabric upholstery on Seat , Used PU Moulded foam on Seat of D-45 kg/m3 ,

Back of Medium back chair is made of Injection moulded PP material structure in Black

colour upholstered with Mesh fabric, Seat Size: 490W ±10 x 410D ±10 x 60Thick. ±5 mm

NS-16 , Back Size:- 460W ±10 x 480H ±10 . Armrest:- Fixed PP armrest in Black colour, seat & No 20.00 3,953.00 79,060.00

back connected with arms . Under structure:- Cantilever frame made stainless steel of

202 grade round pipe of dia. 25.4x14 gauge thickness with Plastic bushes.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

Digitally signed by Anuvesh

S. No Item Name Description of Items UOM Qty Picture Unit Price Amount

Medium Back Revolving Chair, the Overall Dimension:- 710W ±10 x 710D ±10 x 930H

min ±10 mm . Seat of Medium back chair is made of 12mm thick hot pressed plywood

pasted with PU Moulded foam with Fabric upholstery on Seat , Used PU Moulded foam

on Seat of D-45 kg/m3 , Back of Medium back chair is made of Injection moulded PP

material structure in Black colour upholstered with Mesh fabric, Seat Size: 490W ±10 x

410D ±10 x 60Thick. ±5 mm , Back Size:- 460W ±10 x 480H ±10 . Mechanism:- Centre

Tilt Mechanism Single point control , Provides maximum adjustability and scope for

CHAIR -4 comfort , Seat & Back are fixed together with arms & whole structure moves together in

NS-17 Mesh Full one direction , Single/ Upright position locking , Tilt tension knob to loosen or tighten the No 10.00 6,213.00 62,130.00

Back tension according to users body weight . Gas lift:- Lift Used gas lift of 120 mm size of

Class-IV grade , Plastic Gas lift cover . Armrest:- Fixed PP armrest in Black colour, seat &

back connected with arms . Chair Base & Wheels:- Revolving Pedestal metal inserted

PPCP base consists of 5 prongs with 660±5 mm pitch circle diameter, 50mm Dia. Black

Nylon - Twin Wheel Pin castor.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

DARWER- 4 Drawer Filling Cabinet made of M.S. Steel Dully Powder Coated with Locking System.

375(W) x quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

470(D) x products, India

4 Drawer Filling Cabinet made of M.S. Steel Dully Powder Coated with Locking System.

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

products, India

Table with SS Top and SS Stools - 6 - Seater- 1180 Width mm x 1580 Depth mm x 750

quality certifications like ISO 9001, ISO 14001, ISO 45001, ISO 50001, BIFMA furniture

NS-20 products, India No 6.00 42,924.00 257,544.00

Digitally signed by Anuvesh

S. No Item Name Description of Items UOM Qty Picture Unit Price Amount

Overall size of the table shall be 1800 L x 1150D x 750 H (mm) and the bench shall be

1200 L x 370D x 450 H (mm). The design shall be comes with Single table and two

benches with loop leg design. The table and benches top shall be comes in rubber wood

slots with polishing. Under structure shall be supported on CRCA MS powder coated

Loop legs of rectangular tube with 1.6mm thick. Loop Legs shall be

connected with horizontal beam through aluminium die cast connectors to accommodate

connection of Leg & horizontal frame. quality certifications like ISO 9001, ISO 14001, ISO

Island Lab 45001, ISO 50001, BIFMA furniture products, India

NS-21 table for Connector shall be L shaped having angle of 10 degree. Cross beam shall be fixed below NO 8.00 197,675.00 1,581,400.00

Physics Lab the table top the horizontal frame

using aluminium die cast connector for better strength. Under structure shall powder

coated up to 40 to 60microns. Tolerance of +/- 5mm to

be considered for dimensions Length, Depth & height and tolerance of 5% to be

considered in thickness.

Lab Table All over size 8x4 with granite top with ply work with electric point

( As per picture )

Overall size of the table shall be 1200 L x 770D x 750 H (mm) and the bench shall be

1200 L x 370D x 450 H (mm). The design shall be comes with Single table and two

benches with loop leg design. The table and benches top shall be comes in rubber wood

slots with polishing. Under structure shall be supported on CRCA MS powder coated

Loop legs of rectangular tube with 1.6mm thick. Loop Legs shall be

connected with horizontal beam through aluminium die cast connectors to accommodate

connection of Leg & horizontal frame. quality certifications like ISO 9001, ISO 14001, ISO

Island Lab 45001, ISO 50001, BIFMA furniture products, India

NS-22 table for Connector shall be L shaped having angle of 10 degree. Cross beam shall be fixed below No 8.00 197,675.00 1,581,400.00

Chemistry Lab the table top the horizontal frame

using aluminium die cast connector for better strength. Under structure shall powder

coated up to 40 to 60microns. Tolerance of +/- 5mm to

be considered for dimensions Length, Depth & height and tolerance of 5% to be

considered in thickness.

Make Royal Koas

Lab Table All over size 8x4 with granite top with ply work with electric point

( As per picture )

Overall size of the table shall be 1200 L x 770D x 750 H (mm) and the bench shall be

1200 L x 370D x 450 H (mm). The design shall be comes with Single table and two

benches with loop leg design. The table and benches top shall be comes in rubber wood

slots with polishing. Under structure shall be supported on CRCA MS powder coated

Loop legs of rectangular tube with 1.6mm thick. Loop Legs shall be

connected with horizontal beam through aluminium die cast connectors to accommodate

connection of Leg & horizontal frame. quality certifications like ISO 9001, ISO 14001, ISO

45001, ISO 50001, BIFMA furniture products, India

Connector shall be L shaped having angle of 10 degree. Cross beam shall be fixed below

the table top the horizontal frame

using aluminium die cast connector for better strength. Under structure shall powder

coated up to 40 to 60microns. Tolerance of +/- 5mm to

be considered for dimensions Length, Depth & height and tolerance of 5% to be

considered in thickness.

Make Royal Koas

Lab Table All over size 8x4 with granite top with ply work with electric point

( As per picture )

Providing and fixing Green Chalk Writing Blackboard comprising premium quality matte

green writing surface bonded to 12 mm thick MDF/plywood backing, enclosed in

NS-24 anodized aluminium frame with corner caps and chalk tray, including all fixtures, SQM 109.44 3,389.00 370,892.16

fasteners, wall mounting arrangements, transportation, labour, and complete installation

as per specifications and direction of Engineer-in-Charge.

Digitally signed by Anuvesh

S. No Item Name Description of Items UOM Qty Picture Unit Price Amount

Digitally signed by Anuvesh

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College Mohanpura Ghazipur (UP) Under CSR Activity of ONGC

Final Basic Rate Carriage Total Labour Total Total CPOH Total GST Total Total

Inculded Included included included

Desk cum Bench N Seater.1240 x

Main Table, ERU & pedestal

Back unit 1800x500x

Main Table, ERU & pedestal .

Multipurpose table 1665 Width mm x

NS-8 900 Depth mm x 740 Height mm

Glass Door Stowell-

Table with SS Top and SS Stools - 6 -

NS-20 Depth mm x 750 Height mm

NBCC (India) Limited

(A Govt. of India Enterprise)

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College

Mohanpura Ghazipur (UP) Under CSR Activity of ONGC

Bill of Quantity (BOQ)

NBCC INDIA LIMITED

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter

GENERAL ABSTRACT OF COST

Amount on Amount on

S.NO DESCRIPTION Total

DSR-2023 Non- DSR

Digitally signed by Anuvesh

S. No. ITEM NAME HSN/SAC PACK QTY PRICE AMOUNT

NS-1 Beaker Graduated, 100ml B.G 70179090 Pcs 20 34 680

NS-2 Beaker Graduated, 250ml B.G 70179090 Pcs 20 54 1080

NS-3 Beaker Graduated, 500ml B.G 70179090 Pcs 20 99 1980

NS-4 Human Skeleton Model Stand, Metallic 90230010 Pcs 1 1765 1765

NS-5 Flask Conical 250ml, B.G 70179090 Pcs 20 92 1840

NS-6 Balance Digital, 0.01gm 90160010 Pcs 20 2824 56480

NS-7 Dropping Bottle 125ml PP 39231090 Pcs 20 25 500

NS-8 Force 'Pointed' 4" (Superior) 90230010 Pcs 40 11 440

NS-9 Funnel 75mm, B.G 70179090 Pcs 40 56 2240

NS-10 Hot Plate 8" (Round) 84194090 Pcs 1 1666 1666

NS-11 Human Skeleton Model Routine 90230010 Pcs 1 1045 1045

NS-12 Ganong's Light Screen / Leaf Clamp Apparatus 90278020 Pcs 1 93 93

NS-13 Measuring Cylinders 50ml B.G 70179090 Pcs 20 68 1360

NS-14 Measuring Cylinders 100ml B.G 70179090 Pcs 20 85 1700

NS-15 Measuring Cylinders 250ml B.G 70179090 Pcs 20 152 3040

NS-16 Microscope Compound 90118000 Pcs 8 2838 22704

NS-17 Dissecting Microscope (Superior) 90118000 Pcs 8 847 6776

NS-18 Pestle & Mortar 4" 69091100 Pcs 8 85 680

NS-19 Petri Dish 3" B.G 70179090 Pcs 40 85 3400

NS-20 Pipette Graduated 0.1/10ml B.G 10ML 70179090 Pcs 40 42 1680

NS-21 Reagent Bottle, N.M 250ml S.G 70179090 Pcs 8 51 408

NS-22 Model: Joints, 'Indian' 90230010 Pcs 6 607 3642

NS-23 Slide Box, 25 Slides, PP 39231090 Pcs 2 73 146

NS-24 Test Tube Holder (Iron) Sup. 90278020 Pcs 40 23 920

NS-25 Test Tube Stand 6 Hole (16mm), P.P 39269099 Pcs 40 34 1360

NS-26 Watch Glass, 3" Dz (Sup.) 70179090 Dz 4 121 484

NS-27 Water Bath Copper 5" 90278020 Pcs 1 229 229

NS-28 Wash Bottle 250ml, PP 39231090 Pcs 20 37 740

NS-29 Cavity Plate '6 Cavity' 69091100 Pcs 40 42 1680

NS-30 Pipette Stand 'Horizontal' PP 39269099 Pcs 1 184 184

NS-31 All Pin(Pkt) 90278020 Pcs 4 28 112

NS-32 Burette with Stopcock, 50ml B.G 70179090 Pcs 80 133 10640

NS-33 Beaker Graduated, 250ml B.G 70179090 Pcs 20 54 1080

NS-34 Capillary Tube for M.P (Routine) 70179090 Pcs 20 17 340

NS-35 Test Tube Holder (Iron) Sup. 90278020 Pcs 40 23 920

NS-36 Tripod Stand 6" (Heavy) 90278020 Pcs 40 113 4520

NS-37 Thermometer -10 to 110C, HG 90251910 Pcs 40 85 3400

NS-38 Pneumatic Trough 20x10cm S.G 70179090 Pcs 40 311 12440

NS-39 Wire Gauge with Frame 90278020 Pcs 40 31 1240

NS-40 Burette Stand with Clamp (Superior) 90278020 Pcs 40 395 15800

NS-41 Surgicals Blades Different Sizes (Pk. of 100) 90230010 P/100 8 424 3392

NS-44 Sciss 4" Pointed (Superior) 90230010 Pcs 40 73 2920

NS-45 Sciss 6" Blunt (Superior) 90230010 Pcs 40 113 4520

NS-47 Staining Rack (Wooden) 6 Hole 90278020 Pcs 40 184 7360

NS-48 Charts: Laminated, 75x100cm 49059990 Pcs 24 127 3048

NS-49 Portraits 12"x18" of Great Personalities 49119100 Pcs 5 395 1975

NS-50 Model: Brain 90230010 Pcs 1 220 220

NS-53 Model: Torso (Full Size) Sup. 90230010 Pcs 1 2189 2189

NS-54 Human Skeleton Model Routine 90230010 Pcs 1 1137 1137

NS-55 Slide: Common As Per List 90230010 Pcs 7 20 140

NS-56 Slide: Mitosis (Set of 5) 90230010 Pcs 1 169 169

NS-57 Slide: Meiosis (Set of 12) 90230010 Pcs 1 378 378

NS-58 Slide: Polen Germination 90230010 Pcs 1 25 25

NS-59 Slide: Blastula 90230010 Pcs 1 59 59

NS-60 Slide: Ameoba 90230010 Pcs 1 59 59

NS-61 Slide: Hydra 90230010 Pcs 1 25 25

NS-62 Specimen: Fern (Dryopteris) 90230010 Pcs 1 223 223

NS-63 Specimen: Mushroom 90230010 Pcs 1 119 119

NS-64 Specimen in Plastic Jar (Common) 90230010 Pcs 9 119 1071

NS-65 Specimen: Ascaris Male 90230010 Pcs 1 237 237

NS-66 Specimen: Spirogyra 90230010 Pcs 1 119 119

NS-67 Specimen: Rhizopus 90230010 Pcs 1 119 119

NS-68 Specimen: Mushroom 90230010 Pcs 1 119 119

NS-69 Specimen: Yeast 90230010 Pcs 1 119 119

NS-70 Specimen: Fern (Dryopteris) 90230010 Pcs 1 237 237

NS-71 Specimen: Lichen 90230010 Pcs 1 119 119

NS-72 Specimen: Ameoba 90230010 Pcs 1 119 119

NS-73 Specimen: Hydra 90230010 Pcs 1 119 119

NS-74 Specimen: Liver Fluke 90230010 Pcs 1 119 119

NS-75 Specimen: Ascaris Male 90230010 Pcs 1 237 237

NS-76 Specimen: Leech 90230010 Pcs 1 209 209

NS-77 Specimen: Earthworm 90230010 Pcs 1 119 119

NS-78 Specimen: Prawn (Palaemon) 90230010 Pcs 1 237 237

NS-79 Specimen: Honey Bees 90230010 Pcs 1 119 119

NS-80 Specimen: Snail 90230010 Pcs 1 119 119

NS-81 Specimen: Star Fish 90230010 Pcs 1 237 237

NS-82 Specimen: Cartilagenous Fish (Shark) 90230010 Pcs 1 119 119

NS-83 Specimen: Rohu Fish 90230010 Pcs 1 212 212

NS-84 Specimen: Toad 90230010 Pcs 1 390 390

NS-85 Specimen: Lizard (Plastic) 90230010 Pcs 1 169 169

NS-86 Model: Pigeon 90230010 Pcs 1 635 635

NS-87 Model: Rabbit 90230010 Pcs 1 904 904

Acetic Acid Glacial ( Ethnoic Acid) 500ml

Staining Solution Nett

Aluminium Sulphate

NS-92 Benedicts Reagent ( Qualitative) 500ml 38220019 500 ml 1 169 169

NS-93 Test Tube Brush Nylon Sup. 90278020 Pcs 40 158 6320

NS-94 Ammonia Soln (Amm. Hydroxide) 500ML 28142000 500 ml 1 233 233

NS-95 Acetocarmine 38220019 100 ml 1 847 847

NS-96 Cavity Block, 40x40mm Soda Glass 70179090 Pcs 40 45 1800

NS-97 Cavity Slide (Single Cavity) 70179090 Pcs 10 6 60

NS-98 Chromatography Paper Sheet 48051100 Pcs 2 17 34

NS-99 Cobalt Chloride (Cobaltous Chloride) 28273990 100 1 1108 1108

NS-100 Rubber Cork 40169990 Pcs 10 8 80

NS-101 Cotton Roll 500gm 90230010 Pcs 1 198 198

NS-102 Dropper Glass with Red Teat 6" 70179090 Pcs 20 17 340

NS-103 Filter Paper 12.5cm ( / Dr. Watt) 48021010 Pcs 5 65 325

NS-104 Formaldehyde 37-41%( Formalin) 500ml 29121100 500 ml 1 176 176

NS-105 Glycerine (Glycerol) 500ml 29054500 500 ml 1 491 491

NS-106 Vaccum Grease 39100090 50 gm 2 393 786

NS-108 Classwork Material Monocot Stem 90230010 Pcs 10 65 650

NS-109 Staining Solution Nett 38140010 500 ml 1 254 254

NS-110 Fehling Solution No 1 38220090 500 ml 1 445 445

NS-111 Fehling Solution No 2 38220090 500 ml 1 522 522

NS-112 D-Glucose Anhydrous 500gm 17023020 500 1 267 267

NS-113 Xylene Rectifield 500ml 29024400 500 ml 1 395 395

NS-114 Lens Cleaning Tissue 48030010 Pcs 1 49 49

NS-115 Magnesium Sulphate 500gm 28332100 500 1 268 268

NS-116 Classwork Material Onion Root Tip 90230010 Pcs 1 51 51

NS-117 Label Book Sticker Type 90278020 Pcs 8 65 520

NS-118 Robert’s Test Reagent 38220090 125 ml 1 106 106

NS-119 Sodium Chloride 500gm 25010010 500 1 219 219

NS-120 Sodium Hypobromite Solution 38220090 500 ml 1 254 254

NS-121 Hydrochloric Acid 500ml 28061000 500 ml 1 402 402

NS-122 Iodine Solution -1% W/V 125ml 38220019 125 ml 1 212 212

NS-123 Methylene Blue Alkaline (Lofflers’s) 125ml 38220019 125 ml 1 219 219

NS-124 Cover Slip 18mm, Square (Pk Of 10gm) 70179090 P/10 g 8 23 184

NS-125 Plain Slide Glass (Pk. Of 50) 70179090 P/50 8 85 680

NS-126 Million’s Reagent 125ml 38220019 125 ml 1 1038 1038

NS-127 Disse Needle, Plastic Handle 90278020 Pcs 40 4 160

NS-129 Petroleum Ether 60-80 C 500ml 27101211 500 ml 1 487 487

NS-130 Potassium Nitrate 28342100 500 1 607 607

NS-131 Safarnine Stain Solution 38220019 125 ml 1 212 212

NS-132 Bile Salt Bacteriological 16030010 100 1 1419 1419

NS-133 Starch Soluble 35051010 500 1 650 650

NS-134 Starch Iodide Paper Indica ( 100 Lvs) 98020000 100 1 42 42

NS-136 Test Tube 25x150mm, 50ml ’B.G 70179090 Pcs 50 14 700

NS-137 Test Tube 15x125mm ’B.G (BOX) 70179090 Pcs 1 635 635

NS-138 Test Tube 15x125mm, 10ml Hard Glass 70179090 Pcs 100 8 800

NS-139 Aluminium Foil 76071190 100 1 237 237

NS-140 Barium Chloride 28273990 500 1 339 339

NS-141 Classwork Material Dicot Stem 90230010 Pcs 10 65 650

NS-143 Indicator Paper pH 8.0-10. 5 (Narrow) 200Lvs 38220090 200 1 339 339

NS-144 Indicator Paper pH 0.0-10. 0 (Wide) 200Lvs 38220090 200 1 339 339

NS-145 Slidoscope (Bioviwer) 2"x2" 37061059 Pcs 8 720 5760

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College Mohanpura Ghazipur (UP) Under CSR Activity of ONGC

Final Basic Rate Carriage Total Labour Total Total CPOH Total GST Total Total

Inculded Included included included

Human Skeleton Model Stand, Metallic 1250.00

Human Skeleton Model Routine 740.00

Ganong's Light Screen / Leaf Clamp 66.00

NS-12 Apparatus

Measuring Cylinders 250ml B.G 108.00

Microscope Compound 2010.00

Pipette Graduated 0.1/10ml B.G 10ML 30.00

Surgicals Blades Different Sizes (Pk. of 300.00

Benedicts Reagent ( Qualitative) 500ml 120.00

Ammonia Soln (Amm. Hydroxide) 165.00

Formaldehyde 37-41%( Formalin) 500ml 125.00

Methylene Blue Alkaline (Lofflers’s) 155.00

Cover Slip 18mm, Square (Pk Of 10gm) 16.00

Test Tube 15x125mm, 10ml Hard Glass 6.00

Indicator Paper pH 8.0-10. 5 (Narrow) 240.00

Indicator Paper pH 0.0-10. 0 (Wide) 240.00

UNIT PRICE TOTAL

INR AMOUNT INR

S. No. ITEM NAME HSN/SAC PACK QTY

1 Analytical Balance, 90160010 Pcs 1 4236 4236.00

2 Blow Pipe, 8" Brass (Superior) 90278020 Pcs 1 30 30.00

3 Burette Stand with Clamp (Wooden) 90278020 Pcs 1 299 299.00

4 Test Tube Brush Nylon Sup. 90278020 Pcs 1 144 144.00

5 Cork Borer (Set of 6) ’German Type’ 90278020 Pcs 1 198 198.00

6 Cork Pressure 90278020 Pcs 1 282 282.00

7 Crucible Tong, M.S 6" 90330000 Pcs 1 35 35.00

8 Charcol Borer 90278020 Pcs 1 56 56.00

9 Silica Crucible, With Lid 25ml 70171000 Pcs 1 466 466.00

10 Deflagrating Spoon 90278020 Pcs 1 71 71.00

11 Distillation App. 3/4Lt. S.S 90278020 Pcs 1 5930 5930.00

12 Funnel Stand, Wooden 90278020 Pcs 1 311 311.00

13 Filter Stand (Wooden) 84239010 Pcs 1 311 311.00

14 Pinch Clip, Hoffman (Screw Type) Iron 90278020 Pcs 1 42 42.00

15 Iron Stand (Complete), Sup. With Ring 90278020 Pcs 1 473 473.00

18 Spirit Lamp, Brass 90278020 Pcs 1 85 85.00

19 Test Tube Stand 6 Hole (Wooden) 90278020 Pcs 1 99 99.00

20 Test Tube Holder (Iron) Sup. 90278020 Pcs 1 17 17.00

21 Triangular File 90278020 Pcs 1 28 28.00

22 Tripod Stand 6" (Heavy) 90278020 Pcs 1 99 99.00

23 Pneumatic Trough 20x10cm S.G 70179090 Pcs 1 282 282.00

24 Wire Gauge with Frame 90278020 Pcs 1 28 28.00

25 Weight Box, Analytical 100gm ’Ord’ 84239010 Pcs 1 565 565.00

26 Clay Pipe Triangle 69091100 Pcs 1 17 17.00

27 Beehive Shelve, 3" (Porcelain) 69091100 Pcs 1 31 31.00

32 Retort 250ml, Borosilicate 70179090 Pcs 1 212 212.00

33 Thistle Funnel N.G 70179090 Pcs 1 23 23.00

34 Woulf Bottle 250ml, S.G 70179090 Pcs 1 184 184.00

35 Kipps Apparatus 250ml, PP 39269099 Pcs 1 847 847.00

38 Test Tube Holder (Brass) Sup. 90278020 Pcs 30 25 750.00

39 Dropper Glass with Red Teat 6" 70179090 Pcs 40 17 680.00

40 Pipette Bulb Rubber, Medium 40149090 Pcs 40 14 560.00

41 Filter Paper 12.5cm ( / Dr. Watt) 48021010 Pcs 10 59 590.00

43 Label Book Sticker Type 90278020 Pcs 3 58 174.00

44 Cobalt Glass 50x50mm 70179090 Pcs 1 198 198.00

45 Spatula S.S 6" Heavy 90278020 Pcs 30 49 1470.00

46 Bunsen Burner With Stop Cock 90278020 Pcs 30 233 6990.00

47 Dropper Glass with Red Teat 6" 70179090 Pcs 50 17 850.00

48 Burette with Stopcock, 50ml B.G 70179090 Pcs 40 127 5080.00

49 Wire Gauge with Frame 90278020 Pcs 40 28 1120.00

51 Spatula S.S 6" Routine 90278020 Pcs 30 8 240.00

52 Tripod Stand 6" (Heavy) 90278020 Pcs 30 99 2970.00

53 Burette Stand with Clamp (Superior) 90278020 Pcs 30 367 11010.00

54 Thermometer -10 to 110C, HG 90251910 Pcs 30 71 2130.00

56 Beaker Graduated, 250ml B.G 70179090 Pcs 1 48 48.00

57 Burette with Stopcock, 50ml B.G 70179090 Pcs 1 120 120.00

58 Flask Conical 250ml, B.G 70179090 Pcs 1 85 85.00

61 Flask Measuring 250ml, B.G 70179090 Pcs 1 106 106.00

62 Pipette Graduated 0.1/10ml B.G 70179090 Pcs 1 45 45.00

64 Flask Conical 250ml, B.G 70179090 Pcs 20 85 1700.00

65 Flask Measuring 100ml, B.G 70179090 Pcs 40 71 2840.00

66 Ammonium Carbonate 28362090 500 4 395 1580.00

67 Ammonium Chloride 500gm 28271000 500 4 339 1356.00

68 Ammonium Sulphate 28332990 500 4 240 960.00

70 Ammonium Sulphate 28332990 500 2 240 480.00

71 Iron Filling, 500gm Nett 90278020 Pcs 4 85 340.00

74 Sodium Thiosulphate (Hypo) 28323010 500 2 240 480.00

76 Cobalt Nitrate (Cobaltous Nitrate) 500gm 28342990 500 4 3036 12144.00

77 Sodium Hydroxide Flakes 500gm 28151110 500 2 254 508.00

79 Potassium Nitrate 28342100 500 2 635 1270.00

81 Magnesium Sulphate 500gm 28332100 500 2 254 508.00

82 Magnesium Chloride 500gm 28273100 500 2 240 480.00

84 Potassium Ferrocyanide 28372030 500 2 833 1666.00

87 Ammonium Ferrous Sulphate (Mohr’s) 28332990 500 4 219 876.00

88 Potassium Dichromate 28415090 500 2 854 1708.00

90 Strontium Nitrate 28342910 500 4 412 1648.00

91 Sodium Sulphide Flakes 28301000 500 2 254 508.00

92 Potassium Chromate 28415090 500 2 791 1582.00

94 Sodium Sulphate Anhydrous 500gm 28331100 500 2 205 410.00

97 Ammonium Cerric Nitrate 28461090 100 gm 2 2033 4066.00

98 2,4-Dinitro Phenylhydrazine 29280090 25 gm 8 240 1920.00

99 Universal Indicator Solution 125ml 38220090 125 ml 8 120 960.00

100 Ammonia Soln (Amm. Hydroxide) 500ML 28142000 500 ml 6 205 1230.00

101 Phenol (Carbolic Acid) 500gm 29071110 500 4 473 1892.00

105 Acetic Acid Glacial ( Ethnoic Acid) 500ml 29152100 500 ml 4 360 1440.00

106 Fehling Solution No 1 38220090 500 ml 4 431 1724.00

107 Fehling Solution No 2 38220090 500 ml 4 537 2148.00

109 Carbon Disulphide 28131000 500 ml 2 522 1044.00

110 Phenolphthalein Solution 38220090 125 ml 2 198 396.00

111 Nessler’s Reagent (For Ammonia) 38220019 125 ml 2 205 410.00

112 Ammonium Molybdate 500gm 28417090 500 1 5648 5648.00

115 Manganous Chloride ( Manganese Chloride) 28273990 500 2 720 1440.00

116 Calcium Chloride Fused 28272000 500 4 233 932.00

117 Sodium Bisulphate Monohydrate 28331910 500 1 332 332.00

118 Cobalt Acetate (Cobaltous Acetate) 29152990 100 gm 10 699 6990.00

120 Hydrochloric Acid 2.5ltr 28061000 2.50 2 678 1356.00

123 Staining Solution Nett 38140010 500 ml 6 240 1440.00

124 Sodium Sulphite Anhydrous 28321090 500 2 205 410.00

125 Picric Acid Saturated Solution 125ml 38220090 125 ml 2 325 650.00

126 Borax (Di-Sod.Tertraborate) 28401900 500 1 353 353.00

127 Aluminium Metal Powder 76032000 250 1 346 346.00

Total 182273.00

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College Mohanpura Ghazipur (UP) Under CSR Activity of ONGC

Final Basic Rate Carriage Total Labour Total Total CPOH Total GST Total Total

Inculded Included included included

Distillation App. 3/4Lt. S.S 4200.00

Pinch Clip, Hoffman (Screw Type) Iron 30.00

Iron Stand (Complete), Sup. With Ring 335.00

Round File 50.00

Cobalt Nitrate (Cobaltous Nitrate) 500gm 2150.00

Ammonium Ferrous Sulphate (Mohr’s) 155.00

Ammonia Soln (Amm. Hydroxide) 145.00

Acetic Acid Glacial ( Ethnoic Acid) 500ml 255.00

Manganous Chloride ( Manganese 510.00

NS-115 Chloride)

S. No. ITEM NAME HSN/SAC PACK QTY PRICE AMOUNT

NS-2 Battery Eliminator 2-12V, 2Amp 85044030 Pcs 10 966 9660.00

NS-3 Daniel Cell Complete 90278020 Pcs 8 362 2896.00

NS-5 Friction Apparatus 90278020 Pcs 8 395 3160.00

NS-6 Weight Box, Physical 100gm ’Iron’ 84239010 Pcs 8 226 1808.00

NS-7 Galvanometer- EDM-80 90303310 Pcs 10 261 2610.00

NS-8 Parallelogram App. ’Stand Type’ 90278020 Pcs 10 1046 10460.00

NS-9 Plug Key One Way, RTN. 90278020 Pcs 20 59 1180.00

NS-10 Pencil Jockey 90278020 Pcs 10 25 250.00

NS-11 Plug Key Two Way, RTN. 90278020 Pcs 8 88 704.00

NS-12 Lechlenchee Cell (Complete) 90278020 Pcs 8 261 2088.00

NS-13 Meter Bridge (Wheatstone Bridge) 90278020 Pcs 8 777 6216.00

NS-14 Compass Magnetic, Al. 75mm 90141000 Pcs 10 45 450.00

NS-15 Optical Bench 1 Meter (Brass) 90278020 Pcs 10 3671 36710.00

NS-16 Glass Prism, 50mm SUP. 90021100 Pcs 30 85 2550.00

NS-17 Potentiometer, 4 Wire 90278020 Pcs 8 607 4856.00

NS-18 Sciss 5" Blunt (Superior) 90230010 Pcs 5 92 460.00

NS-19 Resistance Box Brass 10 Ohm 90278020 Pcs 5 710 3550.00

NS-20 Resistance Box Brass 100 Ohm 90278020 Pcs 5 748 3740.00

NS-21 Resistance Box Brass 1000 Ohm 90278020 Pcs 5 923 4615.00

NS-22 Resistance Box Brass 10000 Ohm 90278020 Pcs 5 1165 5825.00

NS-23 K.Constant Spring App. (Simple) 90278020 Pcs 8 1017 8136.00

NS-24 Slotted Weight 2.5Kg (Iron) 90330000 Pcs 8 494 3952.00

NS-25 Rheostat Size 20cm 90278020 Pcs 10 720 7200.00

Resistance Coil, Round Bak. Case 1,2,3,4,5 90278020 Pcs 20 34 680.00

NS-26 OHM -4 PC EACH

NS-27 Resonance App. (S.S Pipe) 90278020 Pcs 8 1412 11296.00

NS-28 Spherometer, Double Disc 90172010 Pcs 30 212 6360.00

NS-29 Screw Gauge 25mm, (Superior) 90173010 Pcs 20 212 4240.00

NS-30 Meter Scale Full (Routine) 90172010 Pcs 10 71 710.00

NS-31 Meter Scale Half (Routine) 90172010 Pcs 10 56 560.00

NS-32 Stop Watch Digital 1/100 ’Racer’ 91029120 Pcs 8 388 3104.00

NS-33 Sonometer, Soft Wood 90278020 Pcs 8 748 5984.00

NS-34 Spirit Level 4" 90278020 Pcs 4 85 340.00

NS-35 Thermometer -10 to 110C, HG 90251910 Pcs 10 85 850.00

Tunning Fork Loose 250, 480, 512Hz - 5pc 92099400 Pcs 15 71 1065.00

NS-37 Vernier Calliper (Wheel Type) 90173010 Pcs 20 71 1420.00

NS-38 Voltmeter DC, EDM-80 90303310 Pcs 20 233 4660.00

NS-39 Beaker Graduated, 250ml B.G 70179090 Pcs 10 54 540.00

NS-40 DCC Wire (Copper Wire), 100gm 74081190 Pcs 10 138 1380.00

NS-41 Charts: Laminated, 75x100cm 49059990 Pcs 20 127 2540.00

Portraits 12"x18" of Great Personalities 49119100 Pcs 20 367 7340.00

NS-43 Mirror Concave/Mirror Convex 2" 90021100 Pcs 20 25 500.00

NS-44 Lens Convex Dia 2" Fl.15-30cm 90021100 Pcs 10 25 250.00

NS-45 Lens Concave Dia 2" Fl.15-30cm 90021100 Pcs 10 23 230.00

NS-46 Knife Edge Pair for Sonometer 90278020 Pcs 10 56 560.00

NS-47 Glass Slab 75x50x18mm English 70179090 Pcs 30 85 2550.00

NS-48 Bob with Hook 18mm, Brass 90330000 Pcs 20 56 1120.00

NS-49 Rubber Cork 40169990 Pcs 20 8 160.00

NS-50 Slotted Weight 2.5Kg (Iron) 90330000 Pcs 8 494 3952.00

NS-51 DCC Wire (Copper Wire), 500gm 74081190 Pcs 1 600 600.00

NS-52 Soldering Iron 90278020 Pcs 4 282 1128.00

NS-53 Spring Balance, Acrylic 250gm 84238900 Pcs 10 78 780.00

Horse Shoe Magnet ALNICO 2" Sup. 85051190 Pcs 5 169 845.00

NS-55 Copper Calorimeter, 3"x2" 90278020 Pcs 2 254 508.00

NS-56 Newton Colour Disc 6" 90278020 Pcs 2 339 678.00

NS-57 Astronomical Telescope 90058020 Pcs 2 4405 8810.00

NS-58 Lactometer 90258020 Pcs 2 25 50.00

NS-59 Electric ’Bell’ Model RTN. 90230010 Pcs 2 395 790.00

NS-60 Binocular (Routine) 90058020 Pcs 2 720 1440.00

NS-61 PN Junction Diode App. (Superior) 85412900 Pcs 4 2273 9092.00

NS-62 Balance Physical 7 Stone 90160010 Pcs 2 1468 2936.00

NS-63 Boyle’s Law Apparatus 90278020 Pcs 2 1056 2112.00

NS-64 Fortin’s Barometer, (Brass) 90258020 Pcs 2 3581 7162.00

Cylinder Solid Metal (Aluminium) 38mm 90330000 Pcs 2 34 68.00

NS-66 Bob with Hook 18mm, Iron 90330000 Pcs 2 34 68.00

NS-67 S.G Bottle 25ml Borosilicate 70179090 Pcs 2 54 108.00

NS-68 Parallelogram App. ’Stand Type’ 90278020 Pcs 2 1046 2092.00

Searle’s App. (Young Modulus) Brass 90278020 Pcs 2 1412 2824.00

NS-70 Spectrometer, 6" Sup. 90278020 Pcs 2 7102 14204.00

Hydrometer (Light) Range 700-1000 90258010 Pcs 2 78 156.00

NS-72 Spirit Level 6" Or 4" (Plastic) 90278020 Pcs 2 54 108.00

NS-73 Potentiometer, 4 Wire 90278020 Pcs 2 579 1158.00

NS-74 Gold Leaf Electroscope, Metallic 90278020 Pcs 2 402 804.00

NS-75 Tunning Fork Set of 8 Welch 92099400 Pcs 2 459 918.00

Ammonium Chloride 500GM 28271000 500 1 353 353.00

Copper Sulphate 500gm 28332500 500 1 650 650.00

NS-79 Drawing Pin (Pkt) 90278020 Pcs 6 14 84.00

NS-80 Cotton Roll 500gm 90230010 Pcs 1 198 198.00

Total 255847.00

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College Mohanpura Ghazipur (UP) Under CSR Activity of ONGC

Final Basic Rate Carriage Total Labour Total Total CPOH Total GST Total Total

Inculded Included included included

Optical Bench 1 Meter (Brass) 2600.00

Glass Prism, 50mm SUP. 60.00

NS-26 1,2,3,4,5 OHM -4 PC EACH

NS-36 5pc Each

NBCC (India) Limited

(A Govt. of India Enterprise)

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh Inter College Mohanpura

Ghazipur (UP) Under CSR Activity of ONGC

NAME OF THE WORK :-CONSTRUCTION OF NEW SCHOOL BUILDIND AS UPGRADATION OF SHRI NRISINGH INTER

COLLEGE MOHANPURA GHAZIPUR (UP) UNDER CSR ACTIVITY OF ONGC.

ABSTRACT OF COST

DESCRIPTION COST AS PER AS PER MARKET TOTAL AMOUNT

DESCRIPTION COST AS PER AS PER MARKET TOTAL AMOUNT

DSR 2025 (RS.) RATE (RS.) (Rs.)

2.0 LOCAL AREA NETWORK ( LAN ) SYSTEM. 574,891.00 574,891.00 1,149,782.00

GRAND TOTAL (Rs.) 3,659,020.00

GRAND TOTAL (Rs.) 3,659,020.00

Digitally signed by Anuvesh

NAME OF THE WORK :-CONSTRUCTION OF NEW SCHOOL BUILDIND AS UPGRADATION OF SHRI NRISINGH INTER COLLEGE MOHANPURA GHAZIPUR (UP) UNDER CSR ACTIVITY OF ONGC.

S.No Description of items Unit Qty Rate (DSR) Market Rate Amount- DSR/NDSR

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS

PVC insulated copper conductor single core cable in surface / recessed medium class

1 1.10 PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point

with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell

point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

2 1.55 conductor single core cable in surface/ recessed PVC conduit, and earthing the point

with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable

etc. as required.

Wiring for light/ power plug with 2 x 4 sq.mm FRLS PVC insulated copper conductor

3 1.12 single core cable in surface/ recessed medium PVC conduit along with 1 No. 4 sq.mm mtr 540.00 373.00 201420

FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS

PVC insulated copper conductor single core cable in surface/recessed Medium PVC

Supplying and fixing suitable size GI box with modular plate and cover in front on

5 1.31 surface or in recess, including providing and fixing 3 pin 5/6 A modular socket Each 52.00 545.00 28340

outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on

6 1.32 surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket Each 22.00 659.00 14498

outlet and 15/16 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box with modular plate and cover in front on surface

1.57 or in recess including providing and fixing 25 A modular socket outlet and 25 A modular Each 10 807.00 8070

SP MCB, "C" curve including connections, painting etc. as required. (Gysers & AC.)

Supplying and fixing 5 amps to 32 amps rating 240 volts 'C' curve miniature circuit

7 2.10 breaker suitable for inductive load of following poles in the existing MCB DB 0

complete with connections , testing and commissioning etc. as required.

i 2.10.1 Single pole Each 95.00 285.00 27075

ii 2.10.3 Double pole Each 6.00 696.00 4176

iii 2.10.5 Triple pole and neutral Each 2.00 1,301.00 2602

Digitally signed by Anuvesh

S.No Description of items Unit Qty Rate (DSR) Market Rate Amount- DSR/NDSR

Supplying and fixing of following ways surface/ recess mounting, vertical type,

415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder

8 2.5 painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din

bar for mounting MCBs (but without MCBs and incomer ) as required . (Note :

Vertical type MCB TPDB is normally used where 3 phase outlets are required.

Digitally signed by Anuvesh

S.No Description of items Unit Qty Rate (DSR) Market Rate Amount- DSR/NDSR

Supplying and fixing of 25mm medium class PVC conduit along with accessories in

9 1.21 surface/recess including cutting the wall and making good the same in

case of recessed conduit as required

Supplying and fixing two module stepped type electronic fan regulator on the

10 1.25 existing modular plate switch box including connections & modular plate etc. Nos. 106.00 402.00 42612

Supplying and fixing modular blanking plate on the existing modular plate & switch

box excluding modular plate as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV

10.1 grade of following size direct in ground including excavation, sand cushioning, 0

protective covering and refilling the trench etc as required.

10.1.2 Above 35 sq. mm and upto 95 sq. mm Mtr 51.00 475.00 24225

10.1.3 Above 95 sq. mm and upto 185 sq. mm Mtr 91.00 497.00 45227

Supplying and making end termination with brass compression gland and

11.1 aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 KV grade as required.

Installation, testing and commissioning following sizes of exhaust fan in the existing

opening including making good the damages, connections, etc. as required.

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable

tray (Galvanisation thickness not less than 50 microns) with perforation not more than

13 4.6 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with

two numbers GI Suspenders i/c base of suitable size GI angle, GI bolts & nuts, fastner etc

i 4.6.2 150 mm width X 50 mm depth X 1.6 mm thickness Rmt 50.00 803.00 40150

DSR-2025-8.9 LED Batten light (System lumen efficacy ≥105 <120 lm/Watt).

Digitally signed by Anuvesh

S.No Description of items Unit Qty Rate (DSR) Market Rate Amount- DSR/NDSR

Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of

following body material and construction as per IS : 10322 with driver (Replaceable)

as per the requirement with Driver efficiency >85%, Operating voltage AC 140 270 Volt,

frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5

KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker

free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of

minimum 50000 Burning Hours with 70% of initial Lumen maintained till life

ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard

Deviation Colour Matching) <3, Maximum power consumption should not more than

the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word

Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all

respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper

conductor single core cable and earthing etc. as required with Minimum 5 year OEM

warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test

report and all testing required for LED fixtures as per BIS shall be submitted. Shape

size and CCT shall be as approved by Engineer-in Charge as per requirement. (Thermal

management: heat sink of aluminium housing such that LED junction temperature

shall not rise above 90°C).

DSR-2025.8.6 LED Panel light 2x2 ft. (System lumen efficacy ≥105 <120 lm/Watt)

Supplying, installation, Testing & Commissioning of Panel light 2x2 ft., of following body

material and construction as per IS : 10322 with driver as per the requirement with

Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz,

Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short &

Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating)

< 19, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical

circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till

life ends as per LM80 extrapolation IES TM-21-11report, CCT 3000°K / 4000°K / 5700°K

/6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum

power consumption should not more than the specified rating and Fixture shall be of

relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen

printing on housing. complete in all respect i/c external connections with 1.5 sq mm

FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as

required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120

lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as

per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-

Charge as per requirement. (Thermal management: heat sink of aluminium housing such

that LED junction temperature shall not rise above 90°C).

DSR-9.2 Brush Less Direct Current (BLDC) Fan without Remote

Digitally signed by Anuvesh

S.No Description of items Unit Qty Rate (DSR) Market Rate Amount- DSR/NDSR

Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct

Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30

cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al

body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350

RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%,

16 suitable for operation with regulator for speed control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation

resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply,

Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm

FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as

9.2.3 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) Nos. 106.00 2,695.00 285,670.00

Total Amount ( DSR ) 1,950,298.00

Total Amount ( DSR ) 1,950,298.00

Supply of following sizes of XLPE insulated Aluminum conductor strip/ wire

Armoured, overall PVC sheathed 1.1 KV grade cables conforming to relevant IS-

7098 Code and technical specifications.

17 MR 3.5C x 150 sq mm aluminium armoured. Mtr 51.00 1,350.00 68,850.00

18 MR 3.5C x 95 sq mm aluminium armoured . Mtr 91.00 990.00 90,090.00

Distribution Panel: Incoming Side: 200A 4P MCCB (BC-36 KA) - 1 nos, Metering with flush

mounted CT operated VAF Meter class one -1Sets. BUSBAR - 250A Copper busbar (1.4

Amp /sq mm) with suitable size heat srinkable sleev & insulator.Outgoing Side: 63A 4P

19 MR MCCB (25 KA) with both side Spreader -6 nos, 40A TPN MCB (10KA) - 3 nos & 32A TPN Nos. 1.00 400,000.00 400,000.00

3Nos.Fabrication will be 16 SWG CR sheet with

poweder coating paint.

Digitally signed by Anuvesh

S.No Description of items Unit Qty Rate (DSR) Market Rate Amount- DSR/NDSR

Total Amount ( NDSR ) 558,940.00

Total Amount ( NDSR ) 558,940.00

Digitally signed by Anuvesh

NBCC (India) Limited

(A Govt. of India Enterprise)

Project: Construction of New School Buildind as Upgradation of Shri Nrisingh

Inter College Mohanpura Ghazipur (UP) Under CSR Activity of ONGC

NBCC INDIA LIMITED

NAME OF THE WORK :-CONSTRUCTION OF NEW SCHOOL BUILDIND AS UPGRADATION OF SHRI NRISINGH

INTER COLLEGE MOHANPURA GHAZIPUR (UP) UNDER CSR ACTIVITY OF ONGC.

ABSTRACT OF COST

DESCRIPTION COST AS PER DSR TOTAL

2025 (RS.) AMOUNT (Rs.)

1.0 SUB HEAD - I:LOCAL AREA NETWORK ( LAN ) SYSTEM. 574,891.00 -

Digitally signed by Anuvesh

NBCC INDIA LIMITED

NAME OF THE WORK :- CONSTRUCTION OF NEW SCHOOL BUILDIND AS UPGRADATION OF SHRI NRISINGH INTER COLLEGE MOHANPURA GHAZIPUR (UP) UNDER

CSR ACTIVITY OF ONGC

DSR-2025 Amount

2025/NS Description of items Unit Qty DSR-2025 (Rs.)

SUB HEAD - I :- LOCAL AREA NETWORK ( LAN ) SYSTEM.

Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG

Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4

DSR-2025- pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-

39.17 568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating

Temperature Range : -5° to +60°C, Bending Radius : < 4 X Cable Diameter at –5°C ± 1°C and

Pulling Force: 11.5Kg etc. complete as required.

39.17.2 2 Run of cable Meter 600 96 57,600.00

Supplying Installation Testing and Commissioning of 24 port Cat6 Patch Panel loaded. Must

be of 1U height with clear label holders and white label with the panel. 24 Ports Cat-6 Patch

Panel should have ETL/UL verification program certificate for compliance with ANSI/TIA-

568.2-D etc. complete as required

Supplying, Installation, Testing and commissioning of following CAT6 Patch Cord should

39.12 have ETL/UL verification program certificate for compliance with ANSI/TIA-568.2-D etc.

complete as required.

39.12.1 Copper Patch Cords of length 1m (3ft) Each 40 151 6,040.00

39.12.2 Copper Patch Cords of length 3m (10ft) Each 60 227 13,620.00

Supplying, Installation, Testing and commissioning of CAT6 Copper Information Outlet (IO)

with face plate of color as per site requirement, should have ETL/UL verification program

39.14 certificate for compliance with ANSI/TIA-568.2-D. All copper Cable and Components should Each 60 212 12,720.00

be from same OEM to maintain compatibility and interoperability etc. complete as required.

Supplying and fixing of following size Wall Mount Rack having Fixed Structure with 0.8mm

CRCA Sheet, completely knocked-down condition (CKD) Shape, Vertical Mounting Rail 1.6

mm with 'U'Marking, Minimum 2 cable entry/exit provision at Top and bottom with rubber

39.23 protection, Front 5mm Toughened Glass with lock, wall mounting kit, Powder coated Color-

RAL- 7035, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3

numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc.

complete as require

Supplying, installation, Testing and commissioning of following capacity 24 port Layer 2

indoor Network Switch having features and specifications etc. as mentioned here under:

At least 24 X RJ-45 Gigabit Ethernet Ports and additional 2 X 10G Base -T with 4 X SFP Ports

with non-blocking architecture by having Switching capacity of min. 168Gbps and packet

forwarding rate of 125Mpps or higher, 16K MAC table. Console Port, USB port, Stacking

support of min. 8 units per stack. Internal dual AC Power supply, STP, RSTP, MSTP, BPDU

Filter, BPDU Restriction, Min. 9K Jumbo Frame, LBD, IGMP Snooping V1/V2/V3, MLD

Snopping V1/V2. IGMP /MLD Groups 1K or more, IPv4/IPv6 Loopback Interface, 16 L3 IP

Interface, Ipv6 ND, VRRPv3, UDP Helper, ECMP. VLAN: 802.1Ǫ, Port based, Ǫ-in-Ǫ,

39.3 Multicast VLAN, Protocol VLAN, VLAN Trunking, DHCP Snopping, Server, server Screening.

RADIUS , TACACS+ Authentication, ǪoS: 802.1P, 8 queues per port, ǪoS : WRR, Strict+WRR,

WRED, 802.1p. ACL: MAC based, IPv4C IPv6, TCP/UDP Port number, time based ACL, TFTP

Client, SNMP V1, v2c, v3, SNMP traps, RMON, DHCP server, relay, client, LLDP, LLDP-MED,

OAM, Dying Gasp, 802.3ah, sflow, RIP, OSPF v2/v3, policy based route, SSL, SSH. 6 kV

surge protection on all Gigabit Ethernet ports and on all GE RJ-45 access ports.

Certifications: UL, CE, FCC, RoHS, MTCTE, OEM/Product must be on Trusted Telecom

Portal of Department of Telecommunication, Government of India etc. complete as

24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each copper

port supporting 802.3at PoE+ min.

Supplying and fixing of following sizes of mediumclass PVC conduit along with accessories in

1.21 surface/recess including cutting the wall and making good the same in case of recessed

conduit as required.

Supplying, Installation, Testing and commissioning of indoor Wireless Access Point for High

density use having features and specifications etc. as mentioned here under- WiFi6

802.11ax 574Mbps (2.4GHz) + 2402Mbps (5GHz), WIFI 6 Certified, 1 x RJ45 console port,

MG 2.5G LAN POE Port, factory reset, WPA/WPA2/WPA3™ Personal/Enterprise, WEP

64/128-bit, SSID broadcast disable, MAC address access control, Internal RADIUS server,

SNMP, Customizable Captive Portal, Auto Channel, Works as Access Point, WDS, WDS with

AP, Wireless Client ., Web (HTTP), Secure Socket Layer (SSL), Traffic control, Support

ATF/Fast Roaming/Band Steering, Supports enhanced security – WPA-PSK/WPA2-

39.8 PSK/WPA3-PSK and RADIUS client, and Cipher negotiation, and MAC/ IP ACL for networks, Nos. 1 35559 35,559.00

Certifications: MTCTE, CE, FCC. Works as Standalone, Compatible with S/W & H/W

Controller with addtional features like - Real-Time Monitoring and Alerts, Rich Advanced

Features, Centralized Device Management, Role-Based Administration, Real-Time

Monitoring, VLAN and Access Control, Auto RF Management and Bandwidth Optimization,

Multi-SSID and Captive Portal Authentication.OEM/Product must be on Trusted Telecom

Portal of Department of Telecommunication, Government of India etc. complete as

TOTAL SUB HEAD -III 574,891.00