Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹18.4 LAccepted-AOC | 1 | Accepted-AOC L-1 | |
| 2 | 2₹20.7 L+₹2.0 L (10.5%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹22.1 L+₹3.4 L (18.0%)Rejected-Finance | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹23.4 L+₹4.7 L (25.2%)Rejected-Finance NOT AVAILABLE | 4 | Rejected-Finance Being other than L-1 | |
| 5 | 5₹27.4 L+₹8.7 L (46.3%)Rejected-Finance 10TH FLOOR TOWER A3 FLAT NO 1001 MI RUSTLE COURT GOMTI NAGAR EXTENSION GOMTI NAGAR LUCKNOW UP 226010 | LUCKNOW | LUCKNOW | UP | 226010 | 5 | Rejected-Finance Being other than L-1 |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
19 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) LUCKNOW
GE (EAST) LUCKNOW
REPAIR/ MAINT OF OTM ACCN AND PERIODICAL SERVICES TO BLDGS LOCATED IN ZONE E 1 AREA OF AGE B/R II UNDER GE (EAST) LUCKNOW
2023_MES_592492_3
GE/E/LKO/T-14 of 2023-24
Open Tender
Civil Works
Item Rate
270 days
GE (EAST) LUCKNOW
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
GE (EAST) LUCKNOW
₹60,000
Yes
24 Nov 2023
28 Aug 2023
21 Sept 2023
28 Aug 2023
19 Sept 2023
5 Sept 2023
Amount
M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, removing nails and filling all the nail holes with putty and applying one coat of white wash on walls mixed with adequate quantity of fevicol complete all as specified and directed.
All as per Item No 01 above but on ceiling
All as per item No. 01 above but applying applying two coat of white wash on wall surfaces.
M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc and applying one coat of colour wash on walls complete all as specified and directed.
M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc and applying two coat of colour wash on walls complete all as specified and directed.
M&L for preparation of old decorated surface of walls, cornices, pilasters etc by washing rubbing down and stopping old distempered and painted surfaces, removing nails and filling all the nail holes with putty and applying one coat of oil bound distemper (OBD) on walls, cornice, pilasters etc complete all as specified and directed.
All as per item No. 06 above but applying two coats of oil bound distemper (OBD) on wall surfaces.
M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying one coat of cement base paint on walls tinted or white including complete all as specified and directed
M&L for preparation of old decorated plastered or un-plastered surface of walls, cornices, pilasters etc by brooming down scraping, and applying two coat of cement base paint on walls tinted or white including complete all as specified and directed
M&L for applying two coats of oil bound distemper with roller over a coat of primer over white care wall putty after complete removal of existing treatment on old plastered surface including necessary preparation complete all as specified and directed
M&L for preparation of old decorated plastered surface of walls, and applying one coat of weather proof exterior emulsion paint of approved shade/tint on walls complete all as specified and directed
M&L for preparation of old painted wooden surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
M&L for french polishing on old surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats complete all as specified and directed
M&L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed
M&L for writing letter or figured (Block, Roman, Italic or Indian) over base coat not exc 30 cm height with synthetic enamel paint complete all as specified and directed.
M&L for complete removal of existing treatment by scrapping with machnical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.
M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth including complete removal of existing treatment by mechnical method and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface complete all as specified and directed
M&L for one coat of acrylic water based exterior grade primer @0.9 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item No 17 to 19 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.
Taking down cement plaster on brick or stone walls etc including racking out joints , hacking for key scrubbing down with water etc complete all as specified and directed
Demolition of brick work built in CM including all quoins, arches, pillars etc complete all as specified and directed
M&L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in CM 1:6 complete all as specified and directed.
M&L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius in half brick thick wall, old size brick built in CM 1:4 complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed
M&L for rendering 15mm thick in CM 1:4 on external surfaces of walls & chajja/roof/ceiling mixed, facia at any height with liquid water proofing compound as per manufacturer's instructions surface finished even and smooth without using extra cement complete all as specified and directed. (Note:- WPC shall be measured and paid seperately)
M&L for rendering 5 mm thick on concrete surfaces of ceiling in CM 1:3 complete all as specified and directed
M&L for applying two coats of white wash on ceiling including preparation of newly plastered surfaces complete all as specified and directed.
M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and directed.
M&L for applying two coats of oil bound distemper over a coat of primer on walls including preparation of new plastered surface complete all as specified and directed.
M&L for two coats of cement base paint over a coat of primer on new plastered surfaces of walls including preparation of surfaces complete all as specified and directed.
Dismantling floor hearth or wall tiling etc including cement mortar bedding (but not backing)/ cement plaster including rubbish off the premises complete all as specified and directed
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floors etc laid over and including 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed
M&L for glazed ceramic coloured tiles of size 600x300x7mm thick/450X 350X 7mm thick over and including 10mm thick plaster in CM 1:4 on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed
M&L for vitrified ceramic coloured tiles light shade 10 mm thick (Square/Rectangular) polished area of each tiles n exc 0.36 sqm in floor etc, set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for vitrified ceramic coloured tiles light shade 10 mm thick (Square/Rectangular) polished area of each tiles not exc 0.36 sqm in skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
M&L for 18-20 mm thick machine cut kota stone slab flooring over and including 20 mm thick screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed
Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed
M&L for 25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in floor sub base complete all as specified and directed
Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed
M&L for precast reinforced cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in cover of drain, manhole cover, plateform etc all as specified and directed.
M&L for TMT bars 6 to 8 mm dia for reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-415 or Fe-500 complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including use and waste of necessary form work etc complete all as specified
Dismantling of asbestos cement (corrugated or semi corrugated etc) sheet in roof covering including ridge complete all as specified and directed
M&L for 6 mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls etc. fixed with L- type or J- type or cranked hook bolts complete all as specified and directed
M&L for asbestos cement one piece plain angular ridge 6mm thick fixed with L- type or J- type or cranked hook bolts complete all as specified and directed
S&F Pre - painted galvalume aluminum zink coating GI based corrugated steel sheeting 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw complete all as specified and directed
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed
S&F rolled mild steel section as in main and cross beam, hip and jack rafters, purline where connected to common rafter and running rail and guides for sliding door, fixed with angle cleat or other connecting plates complete all as specified and directed.
Dismantling of old ceiling boards any type and any thickness including cover fillets/ aluminum snap grid complete all as specified and directed
M&L false ceiling with 4 mm thick E-board "Make-Everest" white prelaminated set embossed reinforced designer ceiling board of approved texure fixed with GI imposed grid frame work of size not more than 600 x 600 mm having 24 mm wide T- section, runner made of 0.33 mm GI sheet and angle made of 0.45 mm GI sheet, suspended with 2 mm dia GI wire including two coat of oil bound distemper complete all as specified and directed
S&F in repair 4 mm thick E-board tiles of size 600 x 600 mm (without grid work) in ceiling fixed with screw or as per manufacturer's instruction all as specified and directed.
Taking down chowkats or frames not exc. 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed
Taking down chowkats or frames exc 1.5 sqm but not exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed
Taking down shutters of any description not exc 1.00 sqm each complete all as specified and directed
Taking down shutters of any description exc 1.00 sqm but not exc 2.00 Sqm each complete all as specified and directed
S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed
M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed
S&F MS hold fasts; supports or stays for rainwater, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed
S&F 30 mm thick flush shutters solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed
S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkhats complete all as specified and directed
S&F factory made PVC door frames of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suitable for opening complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed
M&L in repair block board, 18/19mm thick, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame work complete all as specified & directed.
M&L for 0.90mm thick decorative laminates 'Mica type' 1 of surface finished, colour and pattern as approved, fixed with adhesive as per maker's instructions complete all as specified & directed.
M&L magnet ball catcher for cup board shutters complete all as specified & directed.
S&F continuous piano hinges, mild steel bright finished or electro galvanized with width of flap 30 mm when open complete all as specified & directed.
S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete as specified and directed
S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete without glazing bars dovetailed and welding complete as specified and directed
S&F steel ventilator with top hung shutter including hinges, steel peg stay complete all as specified and directed
S&F 100 mm size butt hinges, medium weight, stainless steel complete all as specified and directed .
S&F 250 mm long aluminum alloy, anodised sliding door bolts, plate type, and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts or extruded sections or cast aluminum alloy complete all as specified and directed
S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs including roller & roller plate including taking down by welding or unscrewing complete all as specified & directed. (Note:- Fixed with screw or welding as required)
S&F 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified & directed.
S&F 150 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified & directed.
S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed.
S&F 125mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed.
S&F MS work for chimney bars, bearing bars, window guard bars, plain, let in and fixed independently in wooden frames, and similar articles including making holes in chowkhats or welding in iron frame etc guard bars of independent or framed complete all as specified and directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exc 0.5 sqm in each pane complet all as specified and directed
S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed
S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed
S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples/wooden beading/ necessary welding including taking down from rivet, nut & bolt /welding / wooden beading complete all as specified and directed
S&F in repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed
S&F in repair 0.56 mm plain aluminium sheeting alloy 31000H4 in straight flashing of WC/bath door complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces including preparation of surfaces complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces including preparation of surfaces complete all as specified and directed
Taking down of existing hinges by welding or screw and S&F 100 mm size stainless steel butt hinges, medium weight, fixed with screw or welding complete all as specified and directed
M&L for welding in repair exc 2.5 cm but not exc 5 cm in length and thickness of metal to be welded not exc 6 mm complete all as specified and directed
S&F aluminium anodized door with frame of size 100X44.5X 1.5mm, stile, middle and top rails of size 82X44.5X1.5mm thick and bottom rail of size 114X44.5X1.5mm thick including 5.5mm thick tinted glass panes with all fittings/ fixtures such as cleats, tower bolt, hinges, locking arrangement, pull and push handle of aluminium anodized, hydraulic door closer etc, complete including aluminium and rubber beading complete all as specified and directed
S&F aluminum glazed window with 3.8 mm thick plain / tinted glass consisting of frame of size 63.5 x 44 mm and shutter sections weighing not less than 0.55 kg/m with locking arrangement as approved fixed including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 Nos). hinges type B-21, 100mm long (2 Nos) suitable handle (1 Nos), tower bolt 150 mm long (02 Nos) including powder coated aluminum grills of aperture 75 mm and fixed in frame of window with stainless steel wiremesh including necessary fixing arrangement complete all as specified and directed
Supply and fixing anodised aluminium fully glazed sliding door shutters using 1.5mm thick standard door aluminium section having size of styles, top rail 83x44mm ,where as bottem rail will be made of 110x44mm including necessary jointing cleats,glazing clip, rubber packing, aluminium snap beeding, screw etc anodised aluminium fittings such as 150mm long 3 No aluminium butt hinges B-21 type and 1 No aluminium tower bolt 200mm long (vertical type ) and glazing will be done by 4mm thick plain glass of any approved shade complete all as specified and directed
Supply and fixing anodised aluminium frame of section 100x44x1.60mm to 1.50mm thick fixed with rawal plugs and screw or wire expansion hold fasteners complete all as specified and directed
Dismantling of wooden boarding, any description, fixed in any position complete all as specified and directed
S&F aluminium anodised partition wall with 5.50mm thick glass and/or 12mm thick prelaminated particle board exterior grade decorated both side and 38mmx63 mm size anodised aluminium section frame work fixed with aluminium and rubber beading and fixing arrangement for fixing the framework to wall/floor and frame to frame complete all as specified and directed
Taking down and refixing in same opening of aluminum door shutter of area exc 1.00 sqm but not exc 2.00 sqm including necessary repair with replacement of rubber beading, and other small articles such as cleats, hinges, screws etc complete all as specified and directed
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed
S&F in repair aluminum (Die cast body) hydraulic door closer regulated designation No. 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed
S&F 2000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed
S&F 1000 Ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one complete all as specified and directed
S&F 500 Ltr capacity rotational moulded polyethylene water storage tanks ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing one all as specified and directed
S&F in repair 20 mm dia brass gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed
S&F 15mm dia steel tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed
S&F 20 mm dia steel tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed
S&F in repair vitreous china wash hand basin white size 550 x 400mm including brackets complete all as specified and directed.
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm , bowl size 410mm x 330mm x 160 mm complete all as specified and directed
S&F in repair of aluminium anodised six peg hanger of extruded section & fixed in position of size 300 mm long complete all as specified and directed.
S&F in repair 15 mm bore dia of pipe pillar tap fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed
S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed
S&F in repair 32mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end complete all as specified and directed
S&F in repair 32 mm dia brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed
S&F in repair 32 mm bore low density PVC flexible pipe for wash hand basin/sink etc complete all as specified and directed.
S&F 32 mm bore Low density polyethylene pipes for urinal etc complete all as specified and directed.
S&F in repair vitreous china wash down water closet pan pedestal pattern, including P or S trap and connection to drain (or outgoing pipe) and PVC seat cover excluding flushing cistern and flush pipe complete all as specified and directed
S&F in repair vitreous china white urinals half stall type complete including providing and fixing plugs, screw, 32 mm dia flush pipe, waste fittings, spreader, grating, unions for discharge pipe etc (excluding flushing cistern) complete as specified and directed.
S&F in repair vitreous china sqatting pan, Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed
S&F in repair vitreous China, table top, wash hand basin of size 600 mm x 435 mm x 180 mm, fancy type including 32 mm dia waste coupling and waste pipe complete all as specified and directed. Make: Jaquar, Model No.- KUS-WHT-35901 or equivalent as approved by GE
S&F in repair vitreous china pedestal pan EWC (Couple Closet Bowl) of size 365 x 630 x 760mm including UF seat cover, hinges, S trap-220 mm, including accessories set etc and vitreous china ware flushing cistern complete all as specified and directed. Make : Jaquar (Model No FNS-WHT-40751P FNS-WHT-40201) or equivalent in Cera/Johnson Pedder as approved by GE.
S&F in repair PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and directed.
S&F in repair 15mm bore bib taps cast copper alloy chromium plated with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule complete all as specified and directed
S&F in repair cast iron bib taps 15 mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or ferule complete all as specified and directed.
S&F in repair 15 mm bore stop valves (angle type) cast copper alloy chrominum plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
All as per item no 124 above but concealed type stop valves for shower .
S&F in repair brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed
S&F in repair 15mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.
S&F in repair 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.
S&F in repair 25 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.
S&F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed
S&F in repair CP grating doom 100 mm dia chromium plated complete all as specified and directed
M&L in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed .
S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed
S&F in repair brass chromium plated tubular towel rack, fancy type, exc 60cm long complete all as specified and directed
S&F in repair 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed
S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed
S&F in repair 75mm bore PVC (SWR) bends complete all as specified and directed
S&F in repair 110mm bore PVC (SWR) bends complete all as specified and directed
S&F in repair plastic water closet seat cover white, closed pattern with flat bottom & cover and aluminium anodised hinging device complete all as specified and directed
S&F in repair drapery rods, coloured, standard quality, PVC coated not less than 25mm dia with heads at both ends and middle support/brackets, rings etc. complete all as specified and directed
S&F in repair cast copper alloy health faucet chromium plated with 1.00 Mtr long flexible tube including wall hook complete all as specified and directed
S&F in repair CP brass jet spray with hand hold arrangement including 1.5m long flexible pipe with hook of superior quality complete all as specified and directed
S&F glass corner shelf assembly, fancy type, made of 6 to 7mm thick toughened glass of size 250x250mm, fixed with CP brackets complete all as specified and directed. Make: Jaquar/Marc/Ess or equivalent as approved by GE .
S&F in repair CP brass center hole wash hand basin mixer for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make : Jaquar model No KUB-35009NFB or equivalent in Cera/Plumber as approved by GE.
S&F in repair CP brass wall mixer with telephonic shower for mixing hot and cold water screwed down for iron pipe and fixed for 15 mm bore pipe size complete all as specified and directed. Make : Jaquar model No QQT-7281 or equivalent in Cera/Plumber as approved by GE.
M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling etc complete all as specified and directed
S&F 60 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block any shape and size of M-35 grade of approved shade laid over 50mm thick sand cushion and filled with fine sand complete all as specified and directed.
Cleaning and removing all scale and dirt, etc from water tanks and from mouths of circulating pipes by following method, etc. capacity of water tank exc. 250 ltrs but not exc 500 ltrs complete all as specified and directed.
M&L for heavy duty exterior vitrified tiles of size 300 x 300 x 10 mm laid over 15 mm thick screed bed in CM 1:6, jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tile complete all as specified and directed
QUALITY CONSTRUCTIONS CO
B.S.S.ENTERPRISES
M/s Durga Construction Company
HS ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .