SPECIAL REPAIR TO OR MD ACCN BLDG NO. P-67/1 TO P-67/8 (EIGHT QTRS) OLD ASSEY LINES TRIMULGHERRY OF 60 COY ASC (SUP) AND PROVN OF CONF HALL ALONG WITH TOILET FACILITY AT UNIT 289 INF DOU OF AGE B/R (S) NO. II AND AGE EM (S) UNDER GE (S) SECUNDERABAD

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in hard / dense soil complete all as specified and as directed.

Excavation in trenches n.exc 1.5M and n.exc 1.5m in depth for foundation etc n.exc 10 Sqm on plan and n.exc 1.50M in depth and getting out hard/dense soil complete all as specified and as directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25CM complete all as specified and as directed.

Removing the excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Removing excavated material exc 250 m and n.exc 500M and depositing where directed at a level n.exc 1.50M above the starting point complete all as specified and as directed.

Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for cement concrete in fioundation filling and mass concrete type D2 1:4:8 (40mm graded stone aggregate) complete all as specified and as directed.

M & L for PCC 1:3:6 type B0, (12.5mm graded stone aggregate) as in levelling course including weathering slightly rounded or chamfered angles and throating as directed complete all as specified and as directed.

M & L for PCC 1:3;6, type C1 (using 20 mm graded stone aggregate) as in bed blocks for hold fasts etc including necessary form work complete all as specified and as directed.

M&L for reinforced Cement Concrete type B1 (1:2:4) Using 20 mm graded stone aggregate nominal mix for Chajjas complete all as specified and as directed.

M&L for reinforced cement concrete (Nominal mix) type B1 1:2:4 (20 mm graded stone aggregate) in lintel bands, roof beams and cantilevers etc complete all as specified and as directed.

Supplied only integral water proofing compound etc complete all as spd and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radins built in cement mortar 1:6 complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) Complete all as specified and as directed.

M&L for 40 mm thick damp proof course in cement concrete type 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed.

M&L for Stone masonary wall of uncoursed well bonded in foundation , straight or curved on plan exc 6m mean radius, built in, built in CM (1:4) Complete all as specified and as directed.

M&L for form work to chullah hoods,chajjas troughs and similor items including edges complete all as specified and as directed.

M&L for use and waste of form work to sides and soffits of floor or roof beams, lintles, cantlevers, shelves incl supports etc for rough finished surface of concrete all as specified and directed.

M & L plain fillets square, rectangular in section sawn secured with nails or brads 2nd class soft wood sectional area n.xc 3 sq cm each complete all as specified and as directed.

S&F of 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed.

S & F, 25mm thick, 2nd class hardwood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 complete all as specified and as directed.

S&F 35mm 2nd class hard wood plain framed factory made panelled shutters (two panel) with lock rail and panel of 9mm BWP commercial plywood or 12mm thick veneered particle board with commercial veneering on both faces, size of rail and tile as per IS 1003 (Part-I0 Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S & F 25mm thick flush shutter solid core construction with block board core and ply wood face panels commercial type on both sides. all as specified and as directed.

S&F 30 mm th Flush shutter solid core construction with block board core construction and plywood face panel commercial type on both sides complete all as specified and as directed.

Taking down frames (including grills/wire mesh shutter) with shutters n.exc 1.50 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down frames (including grills/wire mesh) with shutters exc 1.50 Sqm but n.exc 4.00 Sqm each (without taking off shutters from the frame) complete all as specified and as directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.

S&F solid PVC Panel Door shutter 30mm thick style consisting of Frame made out of M.S Tube for top & Bottom rails, MS Frame shall be covered with heat moulded, Plain colour PVC’C’ channel having a PVC Sheets strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for Top rail, lock rail bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour 5mm thick PVC sheet fitted in the MS Frame, welded/ sealed to stiles and rail with suitable PVC sheet beading and jointed together with solvent cement all as per manufacture instruction complete all as specified and as directed.

S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc.complete all as specified and as directed.

S & F factory mad solid PVC moulded door shutters 28 to 30mm thick (stile), with 2, raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification.

S&F grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed.

S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section.complete all as specified and as directed.

S&F 150 mm size Aluminium anodised, barrel tower bolts of extruded section and fixedanodised, complete all as specified and as directed.

S & F 300mm size aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of seat cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 300 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F 100 mm size Mild Steel (MS) butt hinges medium weight cold rolled complete all as specified and as directed.

S&F 150 mm size Aluminium pressed handles cast type, anodised, complete all as specified and as directed.

S & F 100mm aluminium hasp and staple all as specified and as directed.

S & F fancty type power coated 20mm dia curtain rod with fancy type bracket fixed on wall all as specified and as directed.

S&F tubular towel rail 20mm dia, D type 60cm long between flanges, brass cromium plated etc complete all as specified and as directed.

S & F tubular towel rail chromium plated 20mm dia D type 60 cm, between the flangers complete all as specified and as directed.

S&F 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F 0.56 mm nominal dia of wire ; galvanised mild steel wire cloth and average width of aparture 1.18 mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and as directed.

S&F in repairs Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm.complete all as specified and as directed.

S&F for 100 mm dia MS Pipe Column/ posts and struts including embedding in concrete and screwing etc. including securing bolts;cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0. complete all as specified and as directed.

M & L for framed work such as grills, gratings etc with ends of bars, framed guard bars, ladders etc and similar works conforming to Fe-290 Gde E-165.

S & F MS hold fases (FI 25X3, 250mm long) conforming to Fe-290, Gde E-165, complete all as specified and as directed.

S & F Mild steel screw bolts of 11 to 15 mm diameter of shank (machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 5 cm and not exceeding 12.50 cm all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips all as specified and directed.

All as per items No 50 above but 5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders complete all as specified and as directed.

M & L roof trusses (framed) trussed purlins, rails and fastenings and heavy bracket framing (beams, tees, angle, channel or flat section) including distance pieces, cleats etc Gde confirming to Fe-410 W. complete all as specified and as directed..

S & F steel ventilator with top hung shutter including box type hinges, steel peg stay complete.all as specified and as directed.

S & F steel window with side hung shutters incluidng projecting type hinges with steel handle and peg stays with glazing bars, devotailed or welded complete all as specified and as directed.

S & F steel window with side hung shutters incluidng projecting type hinges with steel handle and peg stays with out glazing bars, devotailed or welde complete all as specified and as directed.

S & F Powder coated Aluminium frame work for door / windows / ventilators with one or more rebates including joining heat for fixing etc complete all as specified

S&F Powder coated aluminium sliding window shutter , without sash bars aluminium sections weighing 0.55 kg/m including necessary joining cleats ,glazing clips rubber packing anodised aluminium snap beading ,screws,anodised aluminium fitting such as roller, Locking arrangement and suitable handle complete all as specified and as directed.

S&F MS Plain plates, square cut, with riveted, bolted or welded attachment Fe-410-W (Gde-E-250) quality A as specifed (5mm Thick) complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. by Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified and as directed. by Engineer-in-Charge.

M & L for priming plastered roof surfaces with bituminous primer @ 0.3 kg/sqm as per IS-3384 over primer applying 1.2 Kg/Sqm Hot bitumen VG 10 and providing water proofing treatment by applying mineral finish 3.5 kgs/Sqm Actatic Polyprofhylene (advanced aPP torch on membrane mineral finish)having polyster film reinforcement stablised with fibre glass and finished on top with grey mineral slaltes troch on system of thickness 3.00 mm by torch bonding complete all as directed and as specified.

S & F 18/19mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choke laminated and other side balancing white lamination fixed with screwed and beading complete all as specified and as directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and as directed.

M& L for 25mm thick PCC 1:2;4 type B-0 as in sub base of tiles and surface even and smooth without using extra cement complete all as specified and as directed.

M& L for PCC 1:2;4 type B1 using 20mm graded stone aggregate as in padding (level course) on roof surface averaging 40mm thick etc complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement morytar bedding (but not backing), removing rubbish off the premises complete all as specified and as directed.

Takiang down cement plaster/terrazzo finish on brick/RCC/stone wallsof any description including racking out joints hacking for keys scrubbing down with water etc, complete all as specified and as directed.

S&F 4mm thick figured glass ordinery type glazing with oil putty in square panes. Not exc 0.50 sqm in each pane complete all as specified and as directed.

S & F 4mm thick figured glass pin head type and glazing oil putty in square panes n.exc 0.5 Sqm in each pane complete all as specified and as directed.

M&L for 3 mm thick,Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, etc complete all as specified and as directed.

Hacking out old broken glass (any thickness size quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

M&L Preparatioin of new wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer. complete all as specified and as directed.

M&L Preparatioin of old wooden surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.complete all as specified and as directed.

M & L for Two coats of synthetic enamel paint to new steel surfaces over 10cm width or girth including preparation of new surfaces and one coat of red oxide primer complete all as specified and as directed.

M&L Preparatioin of old steel surfaces of any description over 10CM width or girth and applying two coats of synthetic enamel paint over a coat pink primer.complete all as specified and as directed.

S&F mild steel galvanised tubes 15mm medium grade with all fitting, fixed to wall, ceiling or laying in floor.etc complete all as specified and as directed.

S&F mild steel galvanised tubes 20mm medium grade with all fitting, fixed to wall, ceiling or laying in floor etc complete all as spd and as directed.

S&F mild steel galvanised tubes 25mm medium grade with all fitting, fixed to wall, ceiling or laying in floor etc complete all as spd and as directed.

M&L 1000 ltrs rotational moulded polyethylene water storage tanks (cylindrical verical with closed top) hoisted and fixed in position all as specified complete all as specifed and as directed.

S & F in repairs, 15mm bore, Angle cock, cast copper alloy with crutch or butterfly handle, screwed down, high pressure, screwed both ends for iron pipe.complete all as specified and as directed.

S&F stop cock, cast copper alloy, fancy type chromium plated, 15 mm dia bore etc complete all as spd and as directed.

S&F stop cock, cast copper alloy, fancy type chromium plated, 20 mm dia bore etc complete all as specified and as directed.

S & F in repairs 15mm bore stop valves fancy type chromium plated screwed both ends for iron pipe for unions and fixed with long shank and cup (concealed type).complete all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore all as specified and directed.

S&F ball brass valve high pressure with polythene float and fly nut complete screwed for iron pipe of size 20mm dia.etc complete all as spd and directed.

S&F 600 mm long PVC connections, 15 mm dia with PTMT nuts, complete all as specified and as directed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S & F 75mm bore PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls, complete all as specified and as directed.

S & F 75mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S & F 110mm bore PVC (SWR) bends any radius with access door complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore complete all as specified and as directed.

S & F 75mm bore PVC (SWR) branch piece with access door, single 'Y'/'T' equal or un-equal complete all as specified and as directed.

S & F 110mm bore PVC (SWR) vent cowl complete all as specified and as directed.

S & F 110mm aid PVC (SWR) WC connector with lip ring complete all as specified and as directed.

S & F 110mm aid PVC (SWR) WC connector bend type complete all as specified and as directed.

S&F PVC (SWR) floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement all as specified and directed.

S & F for PVC (SWR) gully trap of 125/110mm dia set and jointing with solvent cement complete all as specified and directed.

M & L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 100mm dia pipe complete all as specified and as directed.

All as per item No. 99 above but 150mm dia drain pipe complete all as specified and as directed.

M&L Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 for 150mm dia pipe complete all as specified and as directed.

M & L for SWG drain pipes grade 'A' of 100mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.

All as per item No. 102 above but 150mm dia. complete all as specified and as directed.

M&L salt glazed stone ware gully traps square or rounded mouthed type & fix 150 x 150 mm fixed in cement concrete complete all as specified and as directed.

All as per item No 104 above but 150mm dia. complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting ou existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm dia SWG pipe complete all as specified and as directed.

S & F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantillever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.complete all as specified and as directed.

S & F in repair chromium plated swivel shower complete all as specified and as directed.

Demolition of brick work or stone boulders masonry built in Cement mortar (or) cement lime mortor including all quions, arches, pillars etc.complete all as specified and as directed.

Demolition of un reinforced cement concrete in ground floors and paving n.exc 15 cm thickness (below & above ground level) complete all as specified and as directed.

Demolition of un reinforced cement concrete in any position and any thickness below and above grund level complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) setin cement mortar 100mm dia.complete all as specified and as directed.

All as per item No. 113 above but 150mm dia pipe complete all as specified and as directed.

Removing demolished material exc 250 M n.exc 500 M complete all as specified and as directed.

M&L for providing false ceiling with anodised aluminium snap grid frame work for false ceiling with size of grid 600 x 600mm with aluminium main tee, cross tee size 25x25x1.6 mm and aluminium wall angle size 25x25x1.8 mm fixed to wall hanging from soffits\trusses\bracking using adjustable supporting hanger compressing of GI wire .complete all as sepcified and directed by Engr-In-Charge.

S & F 4mm thick Non Asbestos designer E-board, size 600 x 600, with staples on snap grid, complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with to remove dust etc incl removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 Kg/Sqm complete as directed by Engr-in-Charge.

M&L coloured ceramic glazed tiles 450x300x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc set in jointed in neat cement sluury 10 mm thick in CM 1:6 and pointed to match the colour of tiles complete all as specified and as directed.

M & L for Non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including laying over 15mm thick screed bed in CM 1:4 complete all as directed and as specified by Engineer-in-Charge.

M&L Non skid ceramic colour tiles 300 x 300 x 7 mm thick in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed or bedding of cm 1:4 layer in floor finishes complete all as specified and as directed.

M & L Non skid ceramic coloured tiles 7 to 8mm thick (Squared/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed of 15mm thick in CM 1:4 complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick renderering in CM 1:4 complete all as specified and as directed.

M&L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for 15mm thcik rendering on brick masonry surfaces in CM 1:6 including finished the surfaces smooth and even without using extra cement complete all as specified and as directed.

M&L for 15mm (10mm+5mm) thcik rendering on brick masonry surfaces in CM 1:6 finishingf coat with WPC including finished the surfaces smooth and even without using extra cement.(WPC Should be measured seperately) complete all as specified and as directed.

M & L glazed ceramic coloured tiles in vertical surface 300x200mmx7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete in position laid on over 10mm thick screed in CM 1:4 on wall, complete all as specified and as directed by Engr-in-charge.

M & L for rendering 15mm thick on concrete or fairfaces of brick work in CM 1:4, finished even and smooth without using extra cement but mixing WPC complete,all as directed and as specified (Note:- WPC measured and paid separately).

M & L for rendering 15mm thick in CM 1:3 mixed with integral water proofing compound as per manufacturers instructions as in roof and and chajjas, finished the surface fair and even without using extra cement (Note:- supply of water proofing compound will be measured and paid separately).

M & L rendering 15mm thick on concree or fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as directed and as specified.

M & L rendering 15mm thick on concree or fair faces of brick work in CM 1:4 finished even and smooth without using extra cement complete all as directed and as specified.

M & L for rendering 10mm thick in CM 1:4 rendering on cocrete surface such as ceiling chajjas etc finished evena and smooth (without using extra cement) complete all as specified and as directed.

M &L granite 20mm thick (of any type) work table robed & polished cooking platforms and like over 15mm thick screed bed or bedding in layer of CM 1;4 for laying floor finishes incl pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite, and half moulded at one side complete all as directed and as specified by Egnr-in-Charge.

M & L for applying two coat of distemper oil emulsion on walls over a coat of primer over 2mm thick wall care putty including preparation newly plastered wall surfaces complete all as specified and as directed.

M & L for complete removal existing treatment and applying two coat of distemper oil emulsion on old plastered surface of walls over a coat of primer over 2mm thick wall care putty including preparation complete all as specified and as directed.

M & L for applying two coat of cement base paint on walls over a coat of primer , including preparing newly plastered wall surfaces complete all as specified and as directed.

M & L for complete removal of existing treatment and applying two coats of cement base paint over a coat of primer including preparation of old plaster surfaces of walls, complete all as specified and directed.

M & L for applying three coats of white wash on wall including preparation of new plastered surfaces complete all as specified and as directed.

M & L for applying three coats of white wash on ceiling including preparation of new plastered surfaces complete all as specified and as directed.

M&L for applying three coats of White wash on wall including preparing newly plastered wall surfaces complete all as specified and as directed.

M & L for applying one coat of white wash on ceiling including preparation of old decorated surfaces complee all as specified and as directed.

S & F 15mm bore tubes medium grade galvanised with all fitting and fixed concealed type complete to walls and ceilings or laid in floors 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing (or) removed to store complete all as specified and as directed.

All as per item No. 143 above but 20mm bore complete all as specified and as directed.

Demolition of existing tank of any description and S & F 500 ltrs rotational moulded polythylene water storage tanks, cylindrical vertical with closet top hoisted and fixed in position all as specified in SSR Part-I including 20mm dia PVC high pressure float valve complete all as specified and as directed.

S & F in repair bib tap 15mm bore, fancy type, chromium plated, cast copper alloywith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F bibs taps, cast copper alloy fancy type chromium plated, 15mm dia of bore etc complete all as specified and as directed.

S&F PVC (SWR) bends any radius with access doors 110mm bore complete all as specified and as directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 110mm bore complete all as specified and as directed.

M&L for SWG drain pipe grade 'A' of 150 mm internal dia laid in trenches and jointed in cement mortar 1:1 complete all as specified and as directed.

S & F in repair vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) including waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and as directed

S & F wash down water closet (pedestal pattern) white with plastic water closet seat cover closed pattern incl P or S trap with flat bottom and mild steel chromium plated or aluminised hinging device and flush pipe of low density PVC 32mm dia for low level flushing cistern incl 10 Ltrs capacity PVC Flushing Cistern complete all as specified and as directed. .

S&F vitreous china wash basin white flat back size 630x450 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32 mm (LDPE Pipe)waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm including cutting for and pinning in ends for brackets, fitting with pillar tap 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with or with out letter 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and waste fittings 32mm includkng waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S& F in repairs water closet (squatting pan) complete including provision of lime concrete bedding 'Orissa' pattern size 508 x 440mm white, integral foot rests including10 Ltrs capacity PVC flushing cistern and flush pipe, complete all as specified and as directed by Egnr-in-Charge.

S & F 2nd class hard wood in fillets, square, rectangular in section wrought, secured with nails sectional area n.exc 13 sq cm and n.exc 25 Sq cm fixed in repairs complete all as specified and as directed.

S & F, 35mm thick, 2nd class hardwood factory made partly panelled and partly glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 complete all as specified and as directed.

M&L After plastering the sunken surface, sunken portion to be filled with water and tested for 72 hrs (after required period of curing) to observe leakage/seepages, leakages/seapage if any shall be arrested by pressure grouting and re-tested till leakage/seepages completely stopped. After pointing test, the surface shall be dried and bottom and sides of the sunken slabs shall be treated, priming the plastered surface with bituminous primer conforming to IS-3384 @ 0.3 Kg per Sqm and applying a tack coat of industrial bitumen 85/25 @ 1.2 kg per Sqm over which applying using glass fibre base bituminous felt type II and grade 2 (conforming to IS-7193 1994) and applying one coat of hot blown bitumen of grade 85/25 @ 1.5 Kg per Sqm including 450mm long 25mm dia medum grade GI pipe shall be provided at the lowest in case of leakage. The joints in CI/GI/PVc pipes, Nahani traps, WC and P/S trap connection shall be made leak proof. The gap around the pipes in walls/beams shall be properly filled and sealed with water proof joints fillers complete all as specified and as directed by Engineer-in-Charge.

S & F kitchen plate rack made of stainless steel, ( asper sample kept in office) complete all as specified and as directed by Engineer-in-Charge.

S & F Powder coated aluminium daco Grills (DG 104) with F section Channel complete of 4mm thick for windows of aperture 50 mm complete all as specified and as directed.

S&F in repair two way bib cock or Angle cock 15 mm chromium plated with capstion head fancy type of branded complete all as specified and as directed.

S & F in repairs health faucet with spray jet (hand shower) cromium plated incl all fitting & fixtures complete all as specified and as directed.

Supply and laying steel water tubing, medium grade, galvanised of size 15 mm bore, ISI marked including all ISI marked fittings such as tees, bends elbow reducer, unions etc laid in trenches complete including cutting the existing pipe of any size all as specified and directed .

Supply and fix gun metal gate valve ISI marked cast copper alloy screwed down high pressure with crutch or butter handle screwed both ends for iron pipe or for union and fixed completely as specified suitable for pipe size 15 mm bore.

S & F PVC connecting pipe 45 cm long with two Nos brass check nuts and rubber washers suitable for 15 mm dia GI pipe for hot water connection for geysers complete all as specified and as directed.

Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.

M & L for Point wiring concealed conduit in wall with 1.5 Sq mm copper conductor single core PVC insulated FRLS unsheathed 1100 V grade multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1.6 mm thick MS, duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated sheet including running up of 1.5 Sq mm copper conductor PVC insulated FRLS cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for:- One light point controlled by one, one way switch 5A, SP

All as per items No 168 above but One ceiling fan/wall fan/exhaust fan point controlled by one, one way switch and regulator

All as per items No 168 above but One bell point control by one bell push .

All as per items No 168 above but One light point controlled by two way switch 5 A, SP

All as per items No 168 above but One 3 Pin 5 Amps switch socket Independt board

All as per items No 168 above but one 2/3 pin 5 Amps socket outlet point controlled by one switch on the same board

All as per items No 168 above but but using 4 Sq mm single core copper conductor cable multistranded PVC insulated 1100 Volts grade for 6/16 Amps switch socket combination point including running of 4.00 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

S & F lamp holder insulated body with back plate for angle/batten fittings fixed with wooden round blocks complete all as specified

S & F Switch piano type single pole one way flush type 5 Amps capacity 230 volts.

S & F Modular Switch 1 way 6 A, 1 Module capacity 230 Volts

S & F Modular Switch 1 way 16 A, 1 Module capacity 230 Volts

S & F bell ding dong type AC 230 Volts

S&F Modular bell push 6A 1 module

S & F Modular Socket, 6A- 2/3 combined 2 module of capacity 230 Volts

S & F Modular Socket, 6/16A- 2/3 combined 2 module of capacity 230 Volts

Supply and fix Modular ceiling fan regulator 2 module step type AC 240 volts suitable for 1200/1400 mm sweep Note : For Item No 5 to 11 :- Modular cover plate with frame, Modular Metal Flush Box and modular switches will be inclusive of rate quoted.

S &F ceiling fan regulator step type AC240 Volt suitable for 1200/1400mm each

S & F socket outlet flush type multipupose 2/3 pin 5 amps 230 volts all as specified

S & F Switch socket cobination flush type multipurpose 2/3 pin amps 230 volts complete all as specified

Supply and fix switch socket combination flush type multipurpose 5 in 1 5/16 amps 230 volts complete all as specified

Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified.

S &F Vertical type TPN DB 4 Way double door with incoming as MCCB TP 415 volts AC 3 phase 50 HZ with fixed magnetic setting for current rating of 100 Amps 25 KA locking arrangement including painting by red oxide one coat and powder coated all as directed

S & F MCB SP 6 to 32 Amps 240 volts for fixing in MCB DB's all as specified.

S &F MCB SP 32 to 40 Amps 240 volts for fixing on MCB DB's all as specified

S & F MCB SPN 40/63 Amps 240 volts for fixing on MCB DB's all as specified

S &F single pole and nuetral sheet metal enclousr with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specifed and directed by Enginner -in-charge

S&F Metal Clad Socket 3 Pin 30 Amps industrial type with plug top and MCB SP 32 Amps all enclosed in sheet metal enclosure.

S and F sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 Volts double door with flush type locking system complete all as specified.

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom 1.75m long with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate)

M & L for Submain wiring with two single core 6 Sq mm PVC insulated cable copper conductor multistranded 1100 Volts grade drawn through and including rigid PVC conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly complete including removing the existing unserviceable sub main wiring and making good the disturbed surface to match with the existing all as specified. Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall be measured and paid as one unit length.

S & F Bib taps chrominium plated with crutch or butterfly handle 15 mm dia ,screwed for iron pipe or for brass ferrula and fixed all as specified and directed

S &F angle/batten holder including led lamp of 9 watt of insulated body with back plate for angle batten fittings fixed with wooden round blocks complete all as specified

Disconnecting and removing ceiling fan of 1200/1400 mm sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified. Note :- 1. flexible wire 23/0.0076 from ceiling rose to ceiling fan deemed to be included in the rate quoted by the contractor 2. Necessary repairs/replacement of unserviceable parts shall be measured and paid seperately

M & L Rewinding of burnt ceiling fan of 1200 / 1400mm sweep motor with supper enameled copper wire of suitable size as per details given below of any make, type, model incl transportation (inclusive of material & labour) complete all as specified and directed by Engineer -in-charge.

Supply and fix Sealed ball bearing suitable for ceiling fan of any size

Supply and fix Rubber bushes with MS clamp,bolt,nut and split pins

Supply and fix Fan condensor 2.5 /4 mfd

Supply & replace downrod of 4 ft height

S &F 2 Way Switch

S &F bell push button single pole 230v

S & F 34 watt recess softline luminaire (2x2) FLAT PANEL suitable for armstrong/grid ceiling with high brightness white LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal and all as directed by Engg in charge

Supply and fix box type Wall mounted light fittings with LED lamp 18/20/22 W complete all as specified and directed by Engr-in-Charge.

Supply and fix 18/20 w Wall mounted box type LED tube light fittings alongwith intergrated dirver complete

Supply and fix 9/10 W Wall mounted LED tube batten along with integrated driver complete all as specified and directed by Engr-in-Charge.

S & F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge. .

M & L bracket made out of GI pipe of suitable dia fo sr no16 not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thickness complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and directed by Engg-in-Charge

S & F Ceiling fan of 1200 mm sweep with downrod of 2/4 feet including provision of 3 core flexible copper conductor cable of size 23/0.0076 from ceiling fan and connecting up complete up complete up complete all as specified and directed (Note : Round flexible copper conductor PVC insulated 3 core multi stranded from ceiling rose to connector deemed to be included in the rate quoted by the contractor).

Supply & fix exhaust fan metal body with louvers of 300mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete all as specified and as directed by Engr-in-Charge.

Supply & fix wall mounted fan plastic body with louvers of 400mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete all as specified and as directed by Engr-in-Charge.

Disconnecting and removing of any capacity Geyser from any height bringing down ,dismantaling,cleaning internally and externally throughly examine with cleaning agents,reassembling,including replacement of any kind of defective parts refixing in original position including minor and major repairs of the smooth functioning and provision of new 3 core PVC wire of multistranded copper conductor cable including testing complete all as specified

M & L for repairs to copper inner container like denting, soldering, brazing, leak testing and reassembling of any Ltrs capacity water heater (Geyser) complete all as specified and as directed.

Supply and replace Geyser element 2000 watts of any type

Supply and replace Thermostat

Supply and replace Thermal cutout

Supply and replace Indicator bulb 230 v suitable for any make and colour.

K LAKSHMAN SINGH AND CO

K P R ENTERPRISES

S.R.M.K Enterprises

avanti associates