CLEANING OF MANHOLES, SEWAGE LINE, SEPTIC TANK AND REPLACEMENT OF SEWAGE LINE ETC IN AREA OF AGE B/R-I UNDER GE SAUGOR

Amount

Cleaning of septic tank of any capacity by mechnical means including vaccume suction, taking off suitable capacity fitted with vaccume sunction pump of capacity not less than 15 cum/hr and deposited the sludge and water outside the MOD land complete all as specified and directed.

M&L for cleaning of sewage line SWG/CI pipe/ RCC pipe/PVC pipe etc vertically/horizontally of dia n.exc 200 mm by rodding and well flushing by using sufficient water and making it clear for easy flow of sewage from WC, gully trap, Nahani trap etc upto the first manhole including desludging of first manhole and making it the proper functional to entire satisfaction of Engineer-in-Charge and removing the sludge, silt away from Bldgs etc upto a distance exc 50 m and n.exc 500 m and burying it in pits and covered with earth complete all as specified and directed.

All as per Srl item No 02 here -in-before but length of sewage line cleaned manhole to manhole complete by rodding and well flushing with sufficient water, length of sewage line upto 10 M including desludging of both sides existing manholes complete all as specified and directed.

All as per Srl item No 02 here -in-before but length of sewage line cleaned exc 10 M but n.exc 25 M from manhole to manhole including desludging of both sides existing manholes complete all as specified and directed.

Cleaning of blockage of gully traps, Nahani traps, Floor traps incl removing gratings and re-fixing old or new gratings with white cement complete all as specified and directed.

Dewatering of soak well of any dia and depth completely by pumping out the water and removing it to nearby nala where directed complete all as specified and directed.

Cleaning of man holes of any size and depth by any means and getting out sludge and water and removing to a distance upto 100 mtr and burried into pits covered with 20cm thick soil complete all as specified and directed.

Taking down old unservicable SWR pipe of any dia including fittings complete all as specified and directed

S&F 110 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps complete all as specified and directed.

All as per Srl item No 09 here -in-before but laid in trenches or in floors complete all as specified and directed

S&F in PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) bends of bore 110mm with acess door complete all as specified and directed.

S&F in repairPVC (SWR) junction single ( single T ) equal or unequal 110mm dia complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm dia junction, with acess door single(single 'T') equal or unequal complete all as specified and directed .

S&F PVC (SWR) vent cowl 110mm dia complete all as specified and directed.

S&F 75 mm dia PVC(SWR) pipes single soketed in any length with adhesive jointed fixed to wall with mild steel clamps complete all as specified and directed.

All as per Srl item No 16 here -in-before but laid in trenches or in floors complete all as specified and directed..

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed.

S&F in repair PVC (SWR) bends 75 mm dia with acess door complete all as specified and directed.

S&F in repair for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant cement including PCC 1:2:4 and making good the existing floor complete all as specified and directed.

Demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for brickwork with subclass 'B' old size bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:4 using bricks of crushing strength not less then 35 Kg/cm2 complete all as specified and directed.

M&L for brick work with sub class 'B' brick (old size), in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall complete all as specified & directed.

M&L Brick work with subclass 'B' bricks in one brick thick honey comb walling built in CM 1:4 complete all as per specified and directed.

M&L Brick bats using subclass 'B' bricks for loose filling in soak wells etc complete all as per specified and directed.

M&L cutting into existing manholes for (dia 150mm / 200mm) connecting new or old drains making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required all as specified and directed

Demolition of RCC of roof, beams, landing, chajja, cover slabs and similar suspended work complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in slabs supported on walls as in soak well and septic tank etc complete all as specified and directed.

M&L for form work to soffits of suspended slabs such as flat or curved roof slabs, floor slabs n exc 200mm thick finished fair or curved concrete surface complete all as specified and directed..

M&L for form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 10cm wide and sides of RCC / PCC bands in walls, horizontal or slopping and similar works fair finished concrete surface complete all as specified and directed..

M&L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gde Fe complete all as specified and directed.

M&L for mild steel TMT bars 6 to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Gde Fe complete all as specified and directed.

M&L for mild steel round bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending as in manhole covers handles, steps, rungs etc complete all as specified and directed.

M&L for pre-cast Reinforced Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slab of mane hole set in cement mortar 1:4 including demolition of existing broken cover slabs complete all as specified.

Demolition of cement concrete of any description and in any position complete all as specified and directed.

M&L for cement concrete 1:4:8 type D 2 (using 40 mm graded stone aggregates) as in foundations, filling ,bedding under pipe and mass concrete complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 Sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Ditto all as per item No.39 above but exc 1.50 M depth not exc 3.00m depth all as specified and directed by Engr in charge

Removing excavated soil n exc 0.50m depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed.

Returning ,filling in including spreading ,levelling watering and well ramming with soil in layers n exc 25 cm thick complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware)/ RCC/HDPE pipe of 150mm bore dia pipe set in cement mortar,including bedding,haunching pcc etc, complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware)/ RCC/HDPE pipe of 200mm bore dia pipe set in cement mortar,including bedding,haunching pcc etc, complete all as specified and directed.

Demolition and breaking up drain pipes (salt glazed ware)/ RCC/HDPE pipe of 300mm bore dia pipe set in cement mortar,including bedding,haunching pcc etc, complete all as specified and directed.

S&F HDPE double wall corrugated sewage pipe of 150 mm internal bore SN-8 as per IS 16098 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instruction complete all as specifed and directed.

S&F HDPE double wall corrugated sewage pipe of 200 mm internal bore SN-8 as per IS 16098 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instruction complete all as specifed and directed.

S&F HDPE double wall corrugated sewage pipe of 300 mm internal bore SN-8 as per IS 16098 Part-II 2013 laid in trenches, jointed and tested as per manufacturer instruction complete all as specifed and directed.

M & L for RCC. pipes 150 mm bore, Class NP2 laid, jointed and tested complete with collars including demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe etc set in cement mortar of 150 mm bore pipe complete all as specified and directed

All as per Srl item No. 47 here -in-before but above but 200 mm bore pipes including demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe etc set in cement mortar of 200 mm bore pipe complete all as specified & directed

All as per Srl item No. 47 here -in-before but above but 300 mm bore pipes including demolition and breaking up drain pipes (salt glazed ware)/ RCC pipe etc set in cement mortar of 300 mm bore pipe complete all as specified & directed.

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D2 (using 40mm graged stone aggregtaes) for 150mm mm dia pipe work in foul position complete all as specified & directed.

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D2 (using 40mm graged stone aggregtaes) for 200mm mm dia pipe work in foul position complete all as specified & directed.

M&L for concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8, type D2 (using 40mm graged stone aggregtaes) for 300 mm dia pipe work in foul position complete all as specified & directed.

S&F in repairs vitreous China urinal bowl, flat back of size 465mm x 355mm x 265mm (minimum) white with grating and union for discharge pipe , waste pipe (excluding flushing cistern,flush pipe ) complete all as per specified and directed.

S&F in repairs vitteous Chinaware EWC padestal type closet with white seat & cover with flat bottom with hinging device etc. complete all as per specified and directed.

S&F in repairs vitreous China squatting pan 'Orrisa pattern' size 580mm x 440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including P or S Trap, etc complete all as specified and directed.

S&F in repairs PVC low level flushing cistern of 10 Ltr capacity including flushing pipe bend PVC bend complete all as specified and directed.

S&F in repair bib taps, cast copper alloy chromium plated fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed complete all as specified and directed.

S&F in repair angular/stop valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified and directed by Engineer in charge..

S&F in repair Hand shower (Health faucet) Cast copper alloy chromium plated with 8mm dia , one metre long flexible tube & wall hook complete screwed for iron pipe bore dia 15mm complete all as specified and directed. Make :Jaquar or equvalent

S&F as in repair Multi bib tap 2 in 1 , cast copper alloy chromium plated fency type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.

S&F PVC connections 15mm bore size450mm in length with both end brass/pvc high quality nuts complete all as specified.

S&F in repairs Toilet paper holder with flap chromium plated brass complete all as specified and directed.

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.06 sqm and n. exc. 0.11 sqm (300 x 300 mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 including dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L for glazed ceramic tiles of size 450 x 300 x 7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match laid over and including 15 mm thick rendering in CM 1:4 including dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L 25 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in levelling course of sub base finished even and rough to receive the topping layer, including demolition of floor,complete all as specified and directed.

Treatement for sunken portion is as follows :- (i) Demolition of lean concrete and other/any type & condition of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. (ii) M&L for water proofing plaster for sunken portion in CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth without using extra cement. (iii) M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces. (iv) M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc. (v) M&L for PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate, mixed with WPC @ 2% by wt. of cement, as sub base, 75mm thick on top.

Taking down cement plaster on brick or stone walls, ceiling , chajja etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement mortar 1:4 on brick work / Concrete surfaces finishing the surfaces even and smooth with out using extra cement complete all as specified and directed.

M & L for applying three coats of white wash on new plastered wall/ceiling/chajja surface including preparation of surfacec omplete all as specified & directed.

pal enterprises (BID ID -3260552)

Pandey Construction and Engrs (BID ID -3256239)

dipangashu barick and associates (BID ID -3263673)

d k suppliar (BID ID -3259963)