Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹49.5 LAccepted-AOC D 91 BLOCK D AMITY GREEN HASEMAU LUCKNOW PIN 226028 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226028 | 1 | Accepted-AOC Acceptance of tender | |
| 2 | 2₹63.1 L+₹13.6 L (27.6%)Rejected-Finance VILL PO BUNGWAN KALAN TALBEHAT LALITPUR UTTAR PRADESH 284136 | TALBEHAT | LALITPUR | UTTAR PRADESH | 284136 | 2 | Rejected-Finance Not L1 | |
| 3 | 3₹64.2 L+₹14.7 L (29.8%)Rejected-Finance | 3 | Rejected-Finance Not L1 | |
| 4 | 4₹65.0 L+₹15.5 L (31.3%)Rejected-Finance 5D 95 VRINDAVAN YOJNA RAEBARELI ROAD LUCKNOW UP 226 029 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226029 | 4 | Rejected-Finance Not L1 |
| Sl No | Description | Qty | Unit | M/s Ram Singh Agarwal L3 | BAJAJ CONSTRUCTION L4 | M/S A.R BUILDERS L2 | Matrubhoomi Construction L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with mechanical compressor and gunny bags to remove all loose dirt etc | 850 | 10 Sqm | 10 ₹8,500 Lowest | 20 ₹17,000 | 180 ₹1,53,000 | 40 ₹34,000 |
| 2.00 | M& L for repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm.all as specified and directed . | 5 | 10 Sqm | 900 ₹4,500 Lowest | 1,000 ₹5,000 | 1,900 ₹9,500 | 2,000 ₹10,000 |
| 3.00 | Applying evenly a priming/ tack coat with bituminous primer using paving bitumen of any penetration at 5.0 Kg. Per 10 Sqmetres applied with mechanical bouzer all as specidied and directed. | 850 | 10 Sqm | 205 ₹1,74,250 | 250 ₹2,12,500 | 390 ₹3,31,500 | 200 ₹1,70,000 Lowest |
| 4.00 | M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber, gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as specified and directed. | 850 | 10 Sqm | 3,100 ₹26,35,000 | 3,200 ₹27,20,000 | 3,700 ₹31,45,000 | 2,700 ₹22,95,000 Lowest |
| 5.00 | M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed. | 20 | Cum | 8,000 ₹1,60,000 | 8,000 ₹1,60,000 | 10,700 ₹2,14,000 | 4,000 ₹80,000 Lowest |
| 6.00 | Providing and applying 2.5mm thick road marking stripswith 250 grams glass beads(retroreflective) of specified shade/colour using hot thermoplastic material by fully/semi-automatic thermoplastic palnt| applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoes heater, driven by experoenced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dler, seals, oll, grease and foreign material etc, complete as per direction and accordance with applicable specifidactions as per MoRTH specification having Titatnium -12%, Resin-19% & Intermix Glass Beads-34 % In proportion. Make of Road Marking Paint- PRISMS/DARK EYE/3M Make of Glass Bead | 850 | Sqm | 415 ₹3,52,750 | 420 ₹3,57,000 | 540 ₹4,59,000 | 370 ₹3,14,500 Lowest |
| 7.00 | Supply and fixing cat eyes with two way solar reflective type with 30 mm length double shank of plastic body of slze 100mm x 110mm x 20mm (overall height 50 mm) and with PAMA striplens reflector and welght 164 gram fixed with special epoxy chemical as per manufactures instructions | 100 | Each | 215 ₹21,500 | 225 ₹22,500 | 270 ₹27,000 | 175 ₹17,500 Lowest |
| 8.00 | Supply and fixing aluminlum-alloy body Solar stud with following specification :
(a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low
(b) sunlight. Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point.
(c) 1.2V Ni-MH or NI-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted Insidesolar stud.
(d) Working time 3 to 4 days successively after the battery is fully charged.
(e) Charging time for full charge One full sunny day.
(f) Working temperature : 10 to 75 Degree Celclus.
(g) Flash rate : 60 to 70 times per minute normally.
(h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensurel easy and safe night driving.
(j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters (k) approx.
(K)Solar stud should be free of maintenance and operational in all weather conditions.
(i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side the body to ensure genuinesess. Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank helght 65 mm (Total height 90 mm including shank)
(m) Welght of the Solar Stud should be 650 Gram approx.
(n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface. | 30 | Each | 2,250 ₹67,500 | 2,200 ₹66,000 | 2,000 ₹60,000 | 1,850 ₹55,500 Lowest |
| 9.00 | S&F metal road delineators made out of 75 mm bore medium grade MS pipe of length 80cm embedded with PCC 1:3:6 of size 30cm x 30cm x 30cm x using 20mm graded aggregate 30cm below road level including taking down existing corrugated/broken delineators and applying two coats of synthetic enamel paint over a coat of zinc chrome paint and fixing with high intensity prismatic reflective types of 137.5mm width red colour in 2 pieces and 1 piece yellow/white colour alternatively including taking down old one complete all as specified | 24 | Each | 910 ₹21,840 | 1,000 ₹24,000 | 1,100 ₹26,400 | 585 ₹14,040 Lowest |
| 10.00 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thick (below or above ground level) complete all as specified and directed. | 157.5 | Cum | 70 ₹11,025 | 65 ₹10,237.5 Lowest | 750 ₹1,18,125 | 100 ₹15,750 |
Tender Value
₹67.8 L
EMD Value
₹1.4 L
Closing Date
20 Mar 2026, 6:00 pmClosed
CWE LUCKNOW
HQ CWE Lucknow, 229 MG Road, LucknowCantt, Lucknow-226002
SPECIAL REPAIR TO ROADS IN MRA VIHAR AND USMAN ROAD AT AGE B/R-II AREA UNDER GE (WEST), LUCKNOW.
2026_MES_753460_1
CWE/LKO/W/T-132 OF 2025-26
Open Tender
Civil Works
Item Rate
120 days
LUCKNOW
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE WEST LUCKNOW
₹1.4 L
Yes
18 Jun 2026
20 Feb 2026
27 Mar 2026
20 Feb 2026
20 Mar 2026
13 Mar 2026
20 Feb 2026 - 13 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with mechanical compressor and gunny bags to remove all loose dirt etc | 1,000.5 | 10 Sqm | - | - |
| 2 | M& L for repair to pot holes any depth not exc. 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm.all as specified and directed . | 5 | 10 Sqm | - | - |
| 3 | Applying evenly a priming/ tack coat with bituminous primer using paving bitumen of any penetration at 5.0 Kg. Per 10 Sqmetres applied with mechanical bouzer all as specidied and directed. | 1,000.5 | 10 Sqm | - | - |
| 4 | M&L for 30 mm thick (consolidated thickness) Bituminous premix semi dense asphaltic concrete with 5.50% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver rolled and compacted to required camber, gradient and for uniform smooth surface by using power roller 8 to 12 tonne capacity complete all as specified and directed. | 1,000.5 | 10 Sqm | - | - |
| 5 | M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75 mm or less) with @ 4% binder content (Bituminous grade VG-30) by weight of total mix, laid by mechanical paver, rolled and compacted with 8 to 12 tonne power roller complete all as directed and directed. | 20 | Cum | - | - |
| 6 | Providing and applying 2.5mm thick road marking stripswith 250 grams glass beads(retroreflective) of specified shade/colour using hot thermoplastic material by fully/semi-automatic thermoplastic palnt| applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoes heater, driven by experoenced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dler, seals, oll, grease and foreign material etc, complete as per direction and accordance with applicable specifidactions as per MoRTH specification having Titatnium -12%, Resin-19% & Intermix Glass Beads-34 % In proportion. Make of Road Marking Paint- PRISMS/DARK EYE/3M Make of Glass Bead | 1,050 | Sqm | - | - |
| 7 | Supply and fixing cat eyes with two way solar reflective type with 30 mm length double shank of plastic body of slze 100mm x 110mm x 20mm (overall height 50 mm) and with PAMA striplens reflector and welght 164 gram fixed with special epoxy chemical as per manufactures instructions | 100 | Each | - | - |
| 8 | Supply and fixing aluminlum-alloy body Solar stud with following specification :
(a) Solar panel Mono-Crystalline Solar 2.4V/0.3 Watt and having charging capacity at a very low
(b) sunlight. Red colour Six Super Bright LEDs with 10000 to 18000 mcd (Millicandela) 8 mm fitted at appropriate height for clear blinking point.
(c) 1.2V Ni-MH or NI-CD rechargeable battery capacity 1300 mAh. LSD (Low Self Discharge technology) fitted Insidesolar stud.
(d) Working time 3 to 4 days successively after the battery is fully charged.
(e) Charging time for full charge One full sunny day.
(f) Working temperature : 10 to 75 Degree Celclus.
(g) Flash rate : 60 to 70 times per minute normally.
(h) Brightness sensitive auto-switch, automatically turns on at dusk and turns off at dawn to ensurel easy and safe night driving.
(j) High visibility LEDs help ensure easy and and safe night driving from a distance of 1000-1100 Meters (k) approx.
(K)Solar stud should be free of maintenance and operational in all weather conditions.
(i) The PCB board and solar panel should be sealed in Poly Carbonate case for extra waterproofing and high/low temperature protection. The logo of the manufacturer should be embossed on front side the body to ensure genuinesess. Dimension/Size of the Solar Std should be 125 mmx125mmx25 mm body, with shank helght 65 mm (Total height 90 mm including shank)
(m) Welght of the Solar Stud should be 650 Gram approx.
(n) Minimum 150 gram of a special epoxy chemical should be used per pcs to fix the stud on the road surface. | 30 | Each | - | - |
| 9 | S&F metal road delineators made out of 75 mm bore medium grade MS pipe of length 80cm embedded with PCC 1:3:6 of size 30cm x 30cm x 30cm x using 20mm graded aggregate 30cm below road level including taking down existing corrugated/broken delineators and applying two coats of synthetic enamel paint over a coat of zinc chrome paint and fixing with high intensity prismatic reflective types of 137.5mm width red colour in 2 pieces and 1 piece yellow/white colour alternatively including taking down old one complete all as specified | 24 | Each | - | - |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15cm thick (below or above ground level) complete all as specified and directed. | 157.5 | Cum | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.11 MB
BOQ_843980.xls
BOQ • 0.33 MB
TenderET132.pdf
Tender Documents • 0.85 MB
Criticaldate2.pdf
PDF • 0.12 MB
DateextendT132.pdf
PDF • 0.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .