PROVN OF SECURITY FENCE BETWEEN TECHNICAL AND DOMESTIC AREA AT AF STN SURATGARH

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground embedded in brick work/concrete/masonry etc complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exc 0.5 Cum, in soft/loose soil and getting out, returning, filling in and ramming earth or broken rubble mixed with around, in layerx not exc 25 cm complete all as specified and as directed .

M & L for plain cement concrete 1:2:4, type B-2, using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed

S&F Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and strainings, fixing to any type of standard rails straining bolts, including securing or tying in crossing with and provision of galvanised mild steel wire, staples or steel pins etc (each line wire to be measured) complete all as specified and as directed.

Supply only chain link fencing 3 mm dia of mild steel galvanized wire hot dipped, medium coated as per IS- 4826 complete all as specified and as directed.

Fixing only for chain link fencing including line wires any mesh size and type to any type of standards, rails, straining bolts etc & laid in position including closing after filling etc including binding with binding wire complete all as specified and as directed.(Mesh size 50x50mm and dia 3mm)

S&F MS angle iron confirming to Fe 290 as hand rail round or other steel section or core for wooden hand rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting and riveting or welding including Flat iron (FI) etc, and similar work complete all as specified and as directed

S&F 12mm dia mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm and not exc 10 cm long, complete all as specified and as directed.

S&F mild steel round bars 10mm dia and over cut to length bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe 410 W gde E 250 quality A complete all as specified and as directed.

M&L for preparation of new surfaces of steel of any description and applying two coats of synthetic enamel ordinary tint paint over one coat of red oxide primer of any description exceeding 10cm width or girth not otherwise described complete all as specified and as directed.

M&L for preparation of new surfaces of steel of any description and applying two coats of black Japan paint over one coat of red oxide primer of any description exceeding 10cm width or girth not otherwise described complete all as specified and as directed.(Angle iron embedded in concrete)

M&L for preparation of untreated surfaces of steel of any description and applying two coats of synthetic enamel ordinary tint paint over one coat of red oxide primer of any description exceeding 10cm width or girth not otherwise described complete all as specified and as directed.(Existing old angle iron post)

M&L for preparation of new or previously untreated steel surfaces of any description not exceeding 10cm width or girth, not otherwise described and applying two coats of synthetic enamel ordinary tint paint over one coat of red oxide zink chrome primer complete all as specified and as directed.

M&L concertina razor tape barbed wire (reinforced barbed tape) with dia 1050 mm when unscratched central core wire made up from high tensile spring steel core wire conforming to IS-4454 hot dipped galvanized confirming IS 2629 with diameter 2.59 mm having UTS 145-160 Kg/ Sqm and zinc coating 250-300 g/sqm including Electro galvanized steel strip 0.5mm (+ 0.02mm)thick width 19mm (before wrapping on central core wire), conforming to IS-1573, zinc coating 120gm, sqm and bituminize dipped, width of barbs 11.05mm, pitch of barbs 25.4mm (+ 0.02mm) including clips 1.5mm thick & shall be AI SI 304, number of clips 125 for each coil. Coverage of per coil is 8.5 RM & weight of each coil is 14.00 Kg to 14.50 Kg for fixing as per detail & drg as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep in soft /loose soil and getting out complete all as specified and as directed

Removal of surplus soil/materials to a distance n exc 50mtr and depositing where directed at a level not exc 1.5mtr above the starting point complete all as specified and as directed.

M&L for 75 mm thick PCC (1:4:8) type D-2 (Using 40mm graded crushed stone aggregates) as in sub base of flooring/hardstanding etc complete all as specified and as directed

M&L for 75 mm thick PCC (1:3:6) type C-2 (Using 40mm graded crushed stone aggregates) as flooring/hardstanding etc complete all as specified and as directed

M&L for forming 20mm thick expansion joints filled with pre formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ,A, complete all as specified and as directed

M&L for forming 20mm thick (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound, Grade ,A, complete all as specified and as directed

M&L for forming 20mm thick Construction joints 30mm deep x 10mm wide, filled with sealing compound, Grade ,A, complete all as specified and as directed

M/S BUDHRAM BISHNOI (BID ID -3178309)

BHULLARCONSTRUCTIONS (BID ID -3182279)

SKYLIGHT INNOVATIONS (BID ID -3182092)

J AND K CONSTRUCTION CO (BID ID -3181407)

M/S GODARA CONSTRUCTION CO. (BID ID -3182282)

MS KHOSLA ENTERPIRSES (BID ID -3182846)

M/S ANIL KUMAR (BID ID -3182613)

AP BUILDERS (BID ID -3182382)