SPECIAL REPAIR TO BLDG NO P 128 04 QTR AND P 129 04 QTR AT JCO AT MYNAMATI LINE UNDER GE CENTRAL DELHI CANTT 10

Amount

Dismantling of water tank of any type/pattern exc 500 ltr but n exc1000 ltr capacity and removing from site complete all as specified and directed.

Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet and over flow pipe and provision of wash out pipe etc. complete all as specified and directed.

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubing down with water etc complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on fair faces or other than fair faces of brick work or concrete surfaces firnished even and smooth without using extra cement up to hieght of two storey ,including scaffolding complete all as specified and directed.

M&L for rendering 10mm thick in CM 1:6 on fair faces or other than fair faces of brick work or concrete surfaces of walls firnished even and smooth without using extra cement in two storey bldg complete all as specified and directed.

M & L for applying two coats of cement base paint over one coat of alkali priming on newly plastered surfaces(external) of walls including preparation of new surfaces complete all as specified and directed.

M & L for applying two coats of oil bond destember over one coat of birla white wall care putty on newly plastered surfaces(internal) of walls complete all as specified and directed.

M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling complete all as specifed as direted .

M&L preparing newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparing old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L preparing old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

Complete removal exising teratment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smook soot mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying two coat of oil bond destember over one coat of wall care puttyon old plastered surfaces of walls complete all as specified and directed.

Complete removal exising teratment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smook soot mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying two coat cement base paint over one coat of alkali priming on old plastered surfaces of walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding/backing removing serviceable tiles to store andd rubbish off the premises complete all as specified and directed.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thickscreed bed or bedding layers in cement mortar(1:6) complete all as specified and as directed.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thickscreed bed or bedding layers in cement mortar (1:6) complete all as specified and as directed.

M & L for glazed ceramic tiles of size 300x600x7-8mm thick in vertical surfaces of wall set and jointed in neat cement slurry as per manufacturers instructions and pointed in white/ coloured cement, laid over and including cement screed bed 10mm thick in cement mortar 1:4, complete all as specified

M&L PCC (1:2:4) type C-1 using 12.5mm graded stone aggregate as in coping including necessary form work, including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.5 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.

S&F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid PVC door shutter ,30mm thick (stiles) ,consisting of frame made of MS tubes for top and bottom rail,MS frame shall be covered with heat molulde plain colour PVC channel having PVC sheet strip of 20mm with struck inside with solvent cement for stile and plain colour PVC sheet for top rail ,lockraqil, bott rail and other side and as gap inserted for toprail and bottm rail, panelling of plain colour PVC sheet to be fitted on MS frame welded/sealed t the stiles and rails with suitable PVC sheet beading joined together with solvent cement .fixing the frame at site as per specification and drawing in SSR part-II complete all as specified.

M & L for 35 mm thick factory made 2nd class hardwood plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and directed.

M&L for 35 mm thick 2nd class hard wood glazed/gaused and skelton shutter, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified.

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M & L for preparation of old wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L for preparation of old steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M & L for Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L PCC 1 : 4 : 8, type D2, using 40mm graded stone aggregates, as in foundation of path and hard standing s etc complete all as specified.

M&L 3mm thick sheet glass n exc 0.5 sqm each pane ordinary quality and glazing withoil putty or fixed with beads, complete all as specified and directed.

S & F 150 mm Aluminium anodised handles, cast type complete all as specified and directed.

S & F 150 mm long Aluminium anodised barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

S & F 300 mm long Aluminium alloy anodised sliding door bolts with hasp staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

S&F in repair 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar complete all as specified and directed.

Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified

S & F in repair kitchen plate rack with four shelves made out of stainless steel sheet 1mm thick over all size 90x60x25cm complete all as specified

Supply and fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and waste coupling including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm complete all as specified and directed.

Supply and fix galvanized steel tubing, 15 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Supply and fix galvanized steel tubing, 20 mm bore medium grade including all fittings and short tube pieces, fixed complete to walls and ceilings or laid in floors complete all as directed

Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting exceeding 10cm girth but not exc. 20 cm all as directed.

Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified

S&F in repair vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed.

S&F in repair plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified.

Supply and fix in repairs PVC low level white flushing cistern valveless syphonic action type 10 lts capacity with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC, complete all as specified.

Supply and fix in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified.

S&F in repair PVC connection 15mm dia and 60 cms long with two nos of brass nuts and washers complete all as specified and directed.

Supply and fix in repairs shower rose, chromium plated brass, fancy type, 100x100 mm, with or without swivel , any size, including fixing to steel pipe or union, complete all as directed.

Supply and fix in repairs 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified

S&F stop valves cast copper alloy serwed down high pressure , 15 dia bore fixed in repairs complete all as specified and directed.

S&F stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle 20mm dia bore fixed in repairs complete all as specified and directed.

Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Providing cement concrete type C-1, 1:3:6 ( using 20mm graded stone aggregate), 75cm wide as in plinth protection laid in bays not exceeding 2 Sqm each and finishing even and fair on top without using extra cement with 6mm wide joints throughout the thickness of plinth protection in concrete complete all as specified and directed.

S & F in repair Aluminium drapery Rod 25mm dia Powder Coated including wooden side caps, brackets, and rings @ 120mm c/c/ complete all as approved by Engineer-in-charge

Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends complete all as specified and directed.

S&F 110mm mm dia PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed.

M&L for chipping out spilled and loose concrete cover and derusting steel reinforement of concrete column, beam, slab, chajjas, parapets and the like as directed upto 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforecement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guiniting mix using one part of OPC 53 grade and two part of gaggar sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out upto 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforecement all concrete surfaces shall be throughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

S&F frame work such as grills, frame, gratings guard bar etc ends of bars shouldered and/or riveted, welded or forged into spikes, framed guard bars and work conforming to Fe 410-0 complete all as specified and directed.

M&L for roof treatment as per the description below including dismantling/taking down existing roof treatment complete:- a) preparation of roof surfaces by removing all loose material /dust extra for carrying out water proofing treatment. b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP (Atatic Polypropylene) modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm and apply two coat of silver shield bitumestic aluminum paint all as specified

M&L for machine cut polished Machine cut kota stone 12-15mm thick as in floor and pillar fixed with neat cement slurry over 15mm thick scrred bed in CM (1:4) including rubbing and polishing complete all as specified.

M&L for machine cut polished Machine cut kota stone 12-15mm thick as in risers of steps,skirting, dado and pillar fixed with neat cement slurry over backing coat of 10mm thick in CM (1:3) including rubbing and polishing complete all as specified.

Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for conceled water tubing etc cutting exceeding 10cm girth but not exc. 20 cm complete all as specified and directed.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet double rebates of size 125x60mm for doors, ventilator with double rebates including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S & F Pressed steel frames box type made of 1.25 mm thick MS Sheet single rebates of size 105x60mm for doors, ventilator including necessary fixing lugs, hinges, lock strike plate etc, incl PCC 1:2:4 type B1 (using 20mm graded stone agg) to fill the frame & making good complete all as specified & directed by Engr-in-Charge.

S & F Steel window (Factory made) double rebate, with side hung, shutter incl hinges, tower bolt, steel handle and peg stay complete with glaze and gauge bars (both are complete) devotailed or welded including making good to cutting holes with PCC 1:2:4 complete all as specified

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

S & F 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

M & L for dismantling floor and wall/skirting tiling including cement mortar of any description or thickness in floors, complete all as specified & directed.

M&L Chequered ement concrete tiles 30cm x30cm x22mm thick ,set .jointed and pointed in neat cement slurry in floors wutg grey cement and pigment including cement bed 15mm thick in cement mortar 1:6 ,complete all as specified and as directed.

Demolation Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolation Brickwork or stone/ boulder masonry, built in lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cm 1:6 all as specified and directed.

M&L Providing cement concrete in coping type B-1 ,1:2:4 using 20mm graded stone aggregate complete all as specified including necessary form work and finishing the exposed surface even and smoth with using extra cement complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified.

Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified.

Removal of surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above starting point complete all as specified and directed.

M&L for cement concrete 1 : 4 : 8, type D2, using 40mm graded stone aggregates incl packing under and haunching against the sides for 150mm internal dia of pipes, after they are laid and tested complete all as specified (thickness of concrete bed 100mm).

M&L for cement concrete 1 : 4 : 8, type D2, using 40mm graded stone aggregates incl packing under and haunching against the sides for 200mm internal of pipe, after they are laid and tested complete all as specified (thickness of concrete bed 100mm).

M&L for 150 mm bore DWCPE drain pipes laid in trenches and jointed in CM 1:1 with spun yarn complete all as specified and directed.

M&L for 200mm bore DWCPE drain pipes laid in trenches and jointed in CM 1:1 with spun yarn complete all as specified and directed.

M&L PCC 1 : 2 : 4, type D2, using 40mm graded stone aggregates, as in foundation of manholes etc complete all as specified.

M&L Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finsihed even and smoth without using extra cement complete all as specified.

M&L Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfacesfinsihed even and smoth without using extra cement complete all as specified.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section) in cement concrete 1 : 2 : 4 type B1 using 20mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified.

M&L Factory made Precast cement concrete manhole cover' area of each cover Ex .20sqm but not exceeding 0.75 sqm 100 mm thichK TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specied and directed by E-IN-Charge

M&L Factory made Precast cement conc rete manhole cover' area of each cover not exceeding 0.20 sqm 50 mm thick TypeB1 1:2:4 concreting including grove and hook arrangement for lifting and placing in position and side covered by MS Sheet complete all as specified and directed.

Taking down carefully copper/aluminium point wiring from wooden battan/ conduits or from the wall by chasing/cutting (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc. to be measured separately) and making good disturbed surfaces of walls, floor etc. complete all as specified and directed.

Taking down old MCCB,TPN DBs , SPN DBs,SP MCB & Main Switch/enclosure box of any make and type from the site and making good surface complete all as specified and directed.

Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.

Taking down old unsv light fitting of any size and make from the site and making good surface complete all as specified and directed.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including rigid PVC conduit FRLS, medium grade ,ISI marked ,terminal box of 1.6 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :

(a) One light/fan point controlled by one by one way switch ( switch to be measured and paid separtely)

(b) One bell point controlled by one by one way switch ( switch to be measured and paid separtely)

(c) One 5 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.

(d) -ditto- as above item No 94.03 (c) but on the Same board.

One power point with insulated stranded copper conductor cable 4 Sqmm single core and PVC insulated FRLS 1100 Volts unsheathed copper conductor 4 Sqmm stranded conductor as earth wire connected to dolly complete (socket and switches to be measured and paid separately)

M & L Submain wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 volts grade in and including PVC conduit ISI marked alongwith one run of 6 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main DB and testing on completion etc complete all as directed. Note: Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M&L switch Piano flush type 5 Amp SP one wayall as specified and directed by Engr in Charge.

M&L bell push,flush type,5 amp all as specified and directed by Engr in Charge.

M&L switch piano flush type 15 Amp SP one way all as specified and directed by Engr in Charge.

M&L socket outlet 5 pin 5 Amp flush type all as specified and directed by Engr in Charge.

M&L socket outlet 2 in 1,3 pin 5/15 Amps all as specified and directed by Engr in Charge. Make:-

S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.

M&L ceiling rose 3 phase PVC polycorbonate, isolated body complete all as specified and directed.

S & F electronic fan regulator 5 step 360 degree rotation connecting complete all as specified

M&L bell ding dong AC,230 volts,single pole all as specified and directed by Engr in Charge.

M&L angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete all as specified and directed.

Supply and fix LED batten luminaire surface mounted T-8, 4 feet system wattage of 22 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 100 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 12 watts and not less than 1000 lm with life time of 50000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, Class - 1, SDCM <5 short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥80 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed.

M&L Decorative wall mounting Decorative wall light fixture made up of Polycarbonate,suitable for 14W retrofit LED BULB (B-22 base) complete all as specified and directed.

Supply and fix 10/12 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is > 90 lm/W with a life class of 50,000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S & F LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base all as specified and directed.

S & F LED bulb 14 watts, 1400 lumens output, 6500K suitable for B-22 base complete all as specified and directed.

Supply and Fix 45 W High efficient LED Street light fitting with pressure die cast LM6 Aluminum housing and has lenses specially designed for Street Lighting with polycarbonate cover. System level efficacy of the Luminarie is 100lm/W with a life class of 50,000 burning hours at L70. The color temperature is around 6500 K with a color rendering index of 70. The luminaire is IP:66 protected with IK05 impact resistance. It has an electronic driver complaint to IEC safety standards with a power factor>.0.9, voltage variation range 120-270V, THD<20%, High and low protection along with a surge protection of 4 KV including 40mm dia GI light grade pipe1.5 meter length bend to shape and necessary clamps etc for fixing the light fittings on pole fixed complete as specified and directed.

Taking down carefully the existing ceiling fan of 1200mm from its position after disconnecting electric connection and checking it for its serviceability and refixing after painting all as specified and directed.

M & L for opening up the winding of ceiling fan 1200 mm sweep any make any type and rewinding with super enamelled copper winding wire after inserting super enamelled insulating material binding it with insulating tape etc completely and varnishing well including drying completely. Replacement of worn out / unserviceable capacitor bearing , bush , safety pins, nuts, bolts, washers , rubber bush with ceiling fan clamp, cable PVC flexible 23/0076 and testing the ceiling fan after re-fixing of the blades to the entire satisfaction of Engineer-in-Charge.

Supply and fixing in repair exhaust fan 300 mm (Metal Body) sweep with louver including connecting with suitable size of copper conductor from ceiling rose to fan complete and making suitbale size, hole, for fixing etc all as specified and directed by Engineer in Charge.

S&F in repair fresh Air fan 230mm sweep with louvers including connecting with suitable size of copper conductor from ceiling rose to fan complete and making suitbale size, hole, for fixing etc all as specified and directed.

S&F ceiling fan 1200mm sweep including provision of 3 core PVC insulated sheathed 1100 volts grade flexible cable with stranded copper conductor of size not less than 0.5 sqmm from ceiling rose to fan connector, length as per requirement at site and hook etc all as specified and directed by Engr in Charge.

S & F water heater storage type (Geyser) vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection complete all as specified of capacity 25 ltr and not less than 5 star rating complete all as specified and directed.

Taking down old unserviceable LT Panel & supply fabricating, installation, commissioning and testing wall mounted semi flushed LT panel board indoor type of size 900x600x200mm (approx) made out of 1.6mm thick CRCA sheet suitable for 415 volts, 3 phase, 4 wire duly painted with two coats of synthetic enamelled paint including fixing of of 200 Amps rated copper bus bar for 3 phase and neutral duly fixed on suitable size of insulator, two Nos earth terminal test point, 3 Nos indicator lamp comprising of the following installed complete all as specified and directed :- (a) INCOMING (i) MCCB 4 pole 63 Amps, 16 kA breaking capacity-01 No. (b) OUTGOING (i) MCB SPN 40 Amps 10 kA breaking capacity duly fixed on DIN rail channel-04 Nos ( Outgoing for each qtr) (ii) MCB SPN 10 Amps 10 kA breaking capacity duly fixed on DIN rail channel-02 Nos ( Outgoing for staircase and security light) (iii) Single Phase Static Energy Meter suitable for AMR type of Accuracy class 1.0, 240 Volts 50 Hz with Backlit LCD display, of rating 10-60 Amp (Measures & Displays kWh,V,I,kW,PF, last month history of kWh & MD in kW) with special features like TOD, Tamper logging Optical Communication Port & Display in Absence of Power 04 Nos.

M & L for earthing complete with galvanized steel earth plate 600x600x6mm thick buried vertically in ground to depth not less than 2.25 mtr below ground level, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to earth lead GI 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade 15mm bore for earthing lead, wire mess, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1(using 20mm dia stone aggregate) reinforced with 6mm dia round bar @ 75mm cement concrete both always with MS handle 12mm dai and frame all as shown in electric plate No 3 in page 497 of SSR Part I (2009) including testing ion completion all as directed

M&L distribution board SPN 8 way with 100 Amp rated bus bar double door complete all as specified and directed.

M&L MCB SPN 32 Amp "C " curve complete all as specified and directed.

S&F MCB SP 6-32 Amps 240 volts curve 'C' series 10 KA 50 HZ complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc. 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, laying of pipes etc. n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

Removal of excavation material not exc 50 Meter and depositing where directed at a level not exc. 1.5 M above the starting point complete all as specified and directed.

Supplying laying and cushioning for cable protection in trenches 8 cm thick layer before laying cable and 15 cm thick layer over the cable including well punning complete all as specified and directed.

Supplying laying sub class ‘B’ bricks old size with axis of the bricks perpendicular to the axis of the cable as in cable protection complete all as specified and directed.

Material & labour, jointing & testing XLPE insulated PVC sheathed armoured heavy duty electric cable with stranded aluminium conductor 1100 volts grade, cross sectional area 35 Sqmm 3.5core complete all as specified and directed.

S&F in repair GI tubing light grade in trenches/fixed to wall/ceiling including required GI fitting of size 40mm dia complete all as specified and directed.

cuckoo enterprises

Kunal Construction Co.

SHREE RAM BUILD TECH

imran construction company

SHIVA ENTERPRISES