SPECIAL REPAIRS TO BLDG NO P-2, P-5 AND P-6 AND ADDITION ALTERNATION AND

Amount

Dismantling of floor , hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish outside MOD land complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles in vertical surfaces such as skirting and dados of size 300x450x7-8 mm thick, set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10mm thick rendering of cement mortar 1:4. complete all as specified and directed.

Material and labour for joint less coloured digital tiles of 300x600mm (OWD DEW) with matching Highlighter (ODH DEW MOSAIC WOOD HL) for work on vertical surfaces such as skirting and dados etc. including rendering 10 mm thick in CM 1:4 on wall complete in all respect as specified. Make :- Kajaria, Orient Digital tiles

Material and labour providing cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) 25mm thick as in sub floor/sub base for laying floor finishes/ tiles etc complete all as specified and directed.

Material and labour for non skid ceramic tiles 7-8 mm thick coloured(square /rectangular) exc 0.11sqm but not exc 0.18 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 20 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

Material and labour for vitrified ceramic dark coloured double charged tiles10 mm thick (square /rectangular) area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 20mm thick Screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed. Make: Kajaria, Somany, Orient, Nitco, Marboniite

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour Polymer modified cementious bonding coat , prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight. Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and directed.

Material and labour 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and directed (SBR latex shall be measured and paid separately).

Material and labour preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer including a coat of wall care putty on walls complete all as specified and directed.

Dismantling of concrete by chiselling from RCC members like col, beam, parapet, facia, ceiling etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting providing at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 100mmx100mm (10 gauge welded mesh) & tack welding & provision guniting pressure 2.2 to 2.5 Kg/Sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40mm including stripping floating with wooden strippers for proper dimension control necessary form work & scaffolding up to Eight storey complete. Surface of guniting to be finished fair with 10mm thick plaster in cement mortar 1:4 with water proofing compound @3% by weight of cement, cleaning & removing of waste material etc as directed at site (Welded mesh & addl reinforcement if required measured and paid separetly). Note: Only steel scaffolding is allowed and rate included in above item. The work shall be carried out by enclosing affected area by green cloth.

Supply and fixing Welded steel wire fabric weight n exc 4 Kg /sqm complete all as specified and directed.

Supply only Styrene Butadiene Rubber latex emulsion complete all as specified and directed.

Supply and fixing GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incl all laps cutting and waste complete all as specified and directed.

Material and labour 10 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement all as specified and directed (SBR latex shall be measured and paid separately).

Material and labour for preparation of new decorated surfaces of ceiling and applying one layer of JK/Birla wall putty as per manufacture's instructions and including application of two coats of oil bound distemper over one coat of primer complete all as specified & directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6 M mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Material and labour for Brick work with sub class 'B' bricks straight or curved on plan exc 6.0 m mean radius built in CM (1:6) complete all as specified and directed.

Material and labour 15 mm thick cement plaster/rendering in CM (1:6) on fair face of brick walls finished even and smooth without using extra cement complete all as specified and directed.

Material and labour Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Material and labour for complete removal of existing treatment from old surfaces of wall and applying two coats of oil bound distemper over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

Material and labour for complete removal of old decorated plastered surfaces of walls and applying one layer of JK/Birla wall putty as per manufacture's instructions and including application of two coats of plastic emulsion paint over one coat of primer complete all as specified & directed.

Material and labour for preparation of new plastered surfaces of walls and applying one layer of JK/Birla wall putty as per manufacture's instructions and including application of two coats of plastic emulsion paint over one coat of primer complete all as specified & directed.

Material and labour for complete removal of existing treatment from old surfaces of wall and applying two coats of Exterior Emulsion paint (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty all as specified and directed.

Taking up or down 15mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting chasing in wall/floor complete in all respect as specified

Taking up or down 20mm dia bore of galvanised Iron steel tubing and connections including cleaning for refixing, cutting chasing in wall/floor complete in all respect as specified

Supply and fix 15 mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified. Make : Jindal , TATA, BST.

Supply and fixing 20 mm bore dia of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete in all respect as specified. Make : Jindal , TATA, BST

Cutting into existing manholes for connecting new pipes, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement conc 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm bore of pipe complete all as specified and directed..

Demolition and breaking up drain pipes of 100 mm / 150 mm (Salt glazed ware, AC / PVC/CI or Reinforced concrete) set in cement mortar or any description especified or as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Material and labour Concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement conc 1:3:6 type C-2 for 150mm bore of pipe complete all as specified and directed.

PVC (SWR) pipes of 150 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

PVC (SWR) pipes of 150 mm bore single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed.

PVC (SWR) pipes of 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fix PVC (SWR) pipes single socketed in any length, fixed to walls with clamps 110 mm bore of pipe complete all as specified and directed.

PVC (SWR) pipes of 75 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Supply and fix PVC (SWR) bends any radius 110 mm bore equal or unequal with acess door of complete all as specified and directed.

Supply and fix PVC (SWR) junction single, (Single T) 110mm bore equal or unequal with acess door complete all as specified and directed.

Supply and fix Salt glazed stone ware gully traps, square or round mouthed type 'P' size of gully trap 150x150mm complete all as specified and directed.

Supply and fix PVC (SWR) junction single, (Single T) 150mm bore equal or unequal with acess door complete all as specified and directed.

Supply and fix PVC (SWR) bends any radius 150 mm bore of complete all as specified and directed.

Supply and fix PVC (SWR) floor trap for 100mm diameter of outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and any position not otherwise provided for complete all as specified and directed.

Supply and fix MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165 complete all as specified and directed.

Material and labour MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, grills, gratings, framed guard bars, railings; framework of water tanks and similar work etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

Supply and fix MS framed work as in tubular trusses or square hollow sections for trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position complete all as specified and directed.

Supply and fix 6.00mm thick mild steel plain, black sheet in water tank platform and similar work cutto size, holes punched, including welding to steel framing with including bending or turning up mitred angles, etc as required complete all as specified and directed.

Supply and fix Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets including taking down existing gate complete all as specified and directed.

Material and labour for dismantling of Asbestos cement (Corrugated semicorrugated,etc) sheets including hooks any type in roof covering complete all as specified and directed.

Supply and fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour Prepration new steel surface of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

Taking down chowkats or windows (without taking off shutter from the frames) not exc 1.5 Sqm each complete all as specified and directed.

Taking down chowkats with shutter (with out taking off shutters from the frame) exc 1.5m Sqm but nexc 4.00 sqm each complete in all respect as specified and directed.

Supply and fixing powder coated aluminium 3 track bombay sliding window 2 bays made out of hollow extruded aluminum section as mentioned below and glazed with 5 mm thick clear glass and stainless steel wiremesh fixed with rubber beading/gasket and aluminiun anodised beading all around and lock type handle of size 75mm, provision of rollers with track etc complete all as specified and directed :- (a) Chowkat - size 50.30 x 26 x1.60 mm thick (b) Shutter top and bottom rail - size 37.50 x 15 x 1.00 mm thick (3 set shutter) (c) Shutter inner rail - size 37.50 x 15 x 1.00 mm thick (for 3 set shutter)

Supply and fixing aluminum powder coated grill made of 8mm dia aluminium bars, size of mesh 50mm by 50mm fixed together with aluminium U channel / aluminium angle 40x40x2 mm thick all round the grill complete fixed in position complete all as specified and directed.

Supply and fixing powder coated aluminium ventilators chowkhat made out of hollow extruded aluminum section 63.50 x 38.10 x 2.00 mm thick & shutter made of section 47.00 x 44.45 x 2.00 mm thick complete with 2 no 75 mm Aluminum Hinge 2 Nos 150 mm long Aluminum anodised tower bolt & Aluminium stay. One no 100mm Aluminum anodised D type alum Handle and 3 mm thickfrosted glass in each shutter of vents. The make of glass Saint Gobain/Modiguard. The rate incl rubber packing/Aluminum beading around glass complete with rubber packing Gasket & glazing clip complete all as specified and directed. All section are of JINDAL or Equalant Hindalco.

Supply and fixing 12mm thick toughned frosted/smoked glass door swing both side with self locking vertical spring fitted with necessary fixing arrangement with wall and stainless steel pivot complete including top rail in all respect as specified & directed. Make : Modiguard/ Saint Gobain or equivalent make.

Supply and fixing power coated aluminum partition using 95.6mmx44.8mm x 1.6mm frame work with 12mm thick exterior grade veneered particle boards with decorative veneers on both faces/ 6.00 mm thick frosted glass as directed by engineer in charge including aluminium beading for fixing board each panel n. exc. 1.20 sqm. Make of glass:- Modi float/Atul or equivalent.

Supply and fixing Floor spring suitable for glass door complete all as specified and directed.

Supply and fixing locking arrangement for glass door both side including necessary cutting in toughned frosted glass and floor complete all as specified and directed.

Supply and fixing stainless steel door handle n.exc 450 mm long for toughned glass door including necessary holes in glass complete all as specified and directed.

Supply and fixing factory made PVC internal door frame manufacture by Raj shree of the size 100x45mm with a wall thickness of 5mm, made out of extruded 5mm thick prelam sheet, mitred cut at two corners and jointed with 2 nos. of 150mm long brackets of 15mmx 15mm MS tube. The two vertical door profiles are to be reinforced with 40mmx20mm MS tube of 19 gauge through out the frame. The door frame shall be fixed to the wall using 65/100mm long MS Screws through the frame by using PVC fastners. A minimum of 4nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc. complete as per manufactures specification and directed.

Supply and fixing 35mm thick factory made solid PVC Moulded door shutter, consisting of solid core single leaf flush door of 30mm thickness, lipped with 15mm(5mmx3) thick 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof and fire resistant moulded PVC sheet with 2,4 or 6 raised panel design in defferent plain and / OR prelam colours on one side after routing the moulded design on flush door & 2mm th plain and/ OR prelam PVC sheet on the other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete as per direction of Engineer-in charge, manufacture,s specification and drawing.

Supply and fixing aluminium, anoidized barrel tower bolts of extruded section with bright bolts, length of bolt 200mm complete all as specified and directed.

Supply and fixing aluminium handle cast type, anodised of size 150mm complete all as specified and directed.

Supply and fixing aluminium alloy, anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300mm, bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two stapple plate complete all as specified and directed.

Supply and fixing Butt hinges medium weight galvanised mild steel and fixed, 100mm size of hinges complete all as specified and directed.

Supply and fixing Stain less steel drapery rod 25mm dia with two nos of (SS fancy type) brackets and fixed on walls complete all as specified and directed

Material and labour for demoliton of cement concrete (reinforced cut as required to facilaitate demolition) as in roofs, floors (other than ground floors) beams staircases, landing chajjas and similar sospended work in ground floors and upto 8 storey of any description and in any position incl MS pipes Scafolding and making arrangemenets with hessian clothes for protection from falling of concrete & all othersaftey precautions complete all as specified incl removal of debris outside MOD land complete all as specified and directed.

Material and labour for PCC/RCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, bed plates, railing, copings and like incl. weathering , slightly rounded or chamfered angles, throating and formwork complete all as specified and directed.

Material and labour providing reinforced cement concrete Type B1 1:1.5:3(using 20 mm graded stonr aggregate) as in beams, bands and lintels etc all as specified and as directed

Supply and fixing Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia welding to existing steel reinforcement or securing with clips all as specified and as directed.

Supply and fixing Mild steel TMT bars 5 mm dia., and over up to 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, MS wire as in stirrups, spacers & binders etc. complete all as specified and directed.

Material and labour Formwork for rough finished surface to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Material and labour 20 mm thick (Zet black or equivalent) granite (of any type) machine cut as in flooring, bedded and jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

Material and labour 18 - 20 mm thick (Zet black or equivalent) granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including one number SS clamps (graded - 202) of flat 30mm x 2mm 150mm long made to shape in each slab with drilling hole for hold fastener and12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl grinding and polishing laid over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Material and labour for dismantling boarding, any description, fixed in any position with screws complete all as specified and directed.

Material and labour for 12 mm thick Gypsum board as in ceiling with counter sunk screws on and incl GI channels frame work of standard section as per manufacturer's instructions, fixed @ 1.2 m in one direction and 45 cm in center to center in other direction with necessary fixing arrangement at their junction point at desired heights below roof slab and incl two coats of plastic emulsion paint over a coat of primer on exposed surfaces. ( the frame work shall be fixed with the help of GI suspenders of suitable size with dash fasteners and along wall making good disturbed surfaces smoothening the gypsum board ,POP linning at joints panning as required complete as specified and directed .

Supply and fix to true horizontal level 600x600mm grid panels false ceiling manufactured by M/s Armstrong World Industries using hot dipped galvanised steel sections exposed surface with precoated capping, Main Tee of size 24x32 at every 12mm c/c maxi, rotary stitched cross Tee of size 24x27 mm at every 1200 mm c/c and wall angle of size 19x19 mm fixed to perimeter wall. The complete grid is to be suspended at every 600 mm c/c in both directions by using 2 mm dia pre straightened GI wire at every 1200 mm interval at the main Tee using fine finished tagular edge and M&L for mineral fibre ceiling boards of size 600x600x16mm fixed with staples on snap grid complete all as specified and directed.

Material and labour for solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of PVC fillets 5mm thick of size 35 x 5mm and solvent cement and fixing at site on as per specifications and drawing.

Material and labour for preparation of new decorated surfaces of ceiling one coats of oil bound distemper over one coat of primer complete all as specified and directed.

Dismantling of brick tiles single layer on roofs complete all as specified and directed.

Demolition of mud in roofs any thickness complete all as specified and directed.

Material and labour pre cast PCC plain tile 20mm thick and each tiles exc 0.02 sqm and n.exc 0.09 sqm machine made laid over & & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

Material and labour providing cement concrete type E-2, 1:5:10 (40mm graded aggregate) in mass concrete and filling etc complete all as specified and directed.

(a) Material and labour cleaning the surface, remoive dust dirt, loose particles and unsound substrate and providing 20mm thick cement screed (1:4) mixed with Dr Fixit/STP/Sika tonic liquid 200 gram/Bag over Dr Fixit bonding coat MPB. (b) Applying primer coat with solvent based bitumen primer @ 3.50 ltr/XSqm. (c) Align Dr Fixit/STP/Sika torch shield water proofing 3mm thick membrance using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap. (d) Heat both overlap with round trowel to seal over lap excess compound smoothened,pressed into seam using hot trowel. (e) Seal edges well into grooves & protect with CM 1:2 complete all as specified and directed.

Dismantling water tanks exc 500 ltr and n.exc 1000 ltr and removal from site complete all as specified and directed.

Supply and fixing 1000 litres capacity Rotational moulded polythylene five layered water storage tanks (Cylindrical vertical with threaed top cover) white or blue in colour, pure anti bacterial film inside of tank, hoisted & fixed in position including tank nipple and with union (Two nos each), fittings complete all as specified and directed. Make : SINTEX/ROTEX/POLYWELL.

Supply and fixing in repairs ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20mm bore dia and fixed complete all as specified and directed.

Supply and fixing in repairs 20mm bore gun matel globe or with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified

Supply and fixing in repairs coloured vitreous china white wash hand basin flat back of size 550x400mm including 32mm bore dia CP waste coupling, conforming to Parryware Cat Part No. "OXFORD" C0406 including CI/MS brackets including cutting for complete in all respect as specified and directed Make: Somany/CERA/Parryware or equivalent

Supply and fixing vitreous china wash hand basin of size 705mmX450mmx200mm of Cat Part No ALS-WHT-85601 under counter including 32mm bore dia CP waste coupling, complete in all respect as specified and directed. Make : Jaquar, Prayag , Johnson or equivalent

Supply and fixing in repair 15mm bore dia Stainless steel finish copper alloy pillar tap (swan neck) for wash hand basin with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. Make : Jaquar or equivalent.

Supply and fixing glass shelf of size 500 X 125 mm conforming to Prayag Cat Part No. "DROPLETS" BEA-45 with stainless steel railing and stainless steel fasteners fixed on wall complete all as specified and directed.

Supply and fixing in repairs PVC connection 15 mm bore dia 450mm long with 2 Nos PTMT nuts with washer complete all as specified and directed.

Supply only Waste coupling of PTMT (full or half threaded) 32mm bore dia of discharge pipe complete all as specified and directed.

Supply and fixing Vitreous China urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1`:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement and including s&f cp brass urinal spreader complete all as specified and directed.

Supply and fixing china squatting pan water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with cast iron 'P' or 'S' trap including provn of cement concrete bedding including connections and fixing flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed. Make: CERA, Hind ware, Parryware

Supply and fixing Vitreioius china wash down water closet pan, pedestal pattern, white complete all as specified and directed.

Supply and fixing floor mounted superior coulour wash down water closet (Pedestal pattern), with P or S CI trap and10 ltrs capacity flushing cistern, seat cover, connection to drain or (outgoing pipe) & to flushing pipe anti syphonage pipe etc. complete in all respect as specified. Make : JHONSON, Altis Omni Suits with soft seat. Cat Part - No 0407P/8P, P/S trap

Supply and fixing in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket complete all as specified and directed.

Supply and fixing in repair 15mm bore dia Stainless Steel finish copper alloy angular stop cock with wall flange quarter turn full Antique including cover plate complete all as specified and directed. Make : Jaquar Code : QQT-7053 or equivalent.

Supply and fixing in repairs 15 mm dia brass chromium plated angle cock chromium plated complete all as specified and directed.

Supply and fixing in repairs 15 mm dia brass chromium plated stop cock chromium plated concealed type complete all as specified and directed.

Supply and fixing in repair 15mm bore dia Stainless Steel finish copper alloy long nose bib cock quarter turn including wall flange complete all as specified and directed. Make : Jaquar or equivalent.

Supply and fixing in repairs 15 mm dia brass chromium plated Bib tap fency type chromium plated complete all as specified and directed.

Supply and fixing stainless steel finish copper alloy soap dish complete all as specified and directed. Make : Jaquar or equivalent.

Supply and fixed peg set of 6 fixed with rawal plug complete all as specified and directed. Make : Prayag Cat no BEA-30 or equivalent.

Supply and fixed C P finish Towel Rail (Grab bar) 600mm long of Cat Part No-CAN-1101S complete in all respect as specified and directed. Make:- Jaquar or equivalent.

Supply and fixing chromium plated copper alloy towel ring square complete in all respect as specified and directed. Make:- Jaquar Code : CAN-1121N or equivalent.

Supply and fixing stainless steel finish copper alloy health faucet or hand shower Cat Part No ALD-573 with 1.0 metre long flexible pipe 8mm dia and wall hook, fixed complete in position for pedestal pattern WC all as specified and directed. Make: Prayag , Johnson or equivalent.

Supply and fixing stainless steel finish copper alloy toilet paper holder with flaps Cat Part No - CAN-1153S complete in all respect as specified and directe. Make : Jaquar Code : AKB-35753.

Supply and fixing in repairs chromium plated brass shower rose with swivel joint and shower Arm complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified and directed.

Material and labour for PCC 1:4:8 type D2 1:4:8 (40 mm graded aggregate) 100 mm thick, laid in sub base complete all as specified and directed.

Material and labour for 25mm thick Fiber reinforced heavy duty PU coated cement concrete tile of any pattern decided by Engr-in-charge as in floors/pavings laid over 20 mm thick screed bed 1:6, laid and jointed with white cement slurry mixed with pigment to match the shade of tile complete all as specified and directed. Make -Ultra/coral or equivalent.

Material and labour PU coated 80 mm thick inter locking paver block tiles any shape and size with grey cement and pigment conforming to IS -15658-2006,M-40 grade in path over 40 mm thick sand cushion and joints filled with fine sand up to full depth complete all as specified and directed. Make : Coral/Ceco/A-One /Terra Firma. (NOTE:-The cost of Sand shall be deemed included in the unit rate)

Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide n.exc 1.5m deep & getting out complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in hard/dense soil complete all as specified and directed.

Removing excavated material n.exc 50 m out of the MOD land and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. Note for item No 01 to 126 :- The work described in these items shall be executed in bldgs up to (G + 8 floor) and the rates are deemed to be included in the quoted unit rates.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as switch,sockets, ceiling rose, pendent holders, regulators,light fittings and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

Material and labour of point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in existing conduits and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates of suitable size as per site requiremnt for the following:- Note : If Cutting & chashing required shall be measured/paid under relevant items. Make : Polycab/Havells/RR.

One light/fan/exhaust fan point controlled by one nos, one way switch complete all as specified and directed.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board

All as per item No. 128.00 here in before but with 2.5 sqmm (for phase, neutral) and 1.5 sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board complete all as specified and directed.

Supply and fixing of Modular switch 6 amps 250 V AC one way with ISI mark including 6 amps switch frame complete all as specified and directed. Make:-Indoasian/Havells/Legrand.

Supply and fixing of modular switch 16 A SP one way 240 volts complete all as specified and directed. Make:-Indoasian/Havells/Legrand.

Supply and fixing modular socket 6 A Multi socket for 2 pin and 3 pin 240 volts complete all as specified and directed. Make:-Indoasian/Havells/Legrand.

Supply and fixing of modular socket outlet 16 A-6 pin combined 240 volts complete all as specified and directed. Make:-Indoasian/Havells/Legrand.

Supply and fixing plug metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts including taking out old Unsv metalclads for credit complete all as specified. Make:-Legrand/Havells/Indoasian.

Disconnecting mains connection and taking out old sub main wiring two single core 4/6 sq mm and one single core 4/6 sq mm aluminum conductor cable from the concealed conduit from the wall or ceiling and making good to surface complete all as specified and directed.

Material and labour in replacement of submain wiring with FRLS PVC insulated unsheathed copper conductor multi stranded 1100V grade heavy duty 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 Sqmm PVC insulated unsheathed copper conductor multi sranded cable for continuous earth wire and duly connected to common earth dolly all as specified and directed (The specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length). Make:-Polycab/Havells/RR.

Material and labour in replacement of submain wiring with FRLS PVC insulated unsheathed copper conductor multi stranded 1100V grade heavy duty 2 x 6 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 6 Sqmm PVC insulated unsheathed copper conductor multi sranded cable for continuous earth wire and duly connected to common earth dolly all as specified and directed (The specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one run length). Make:-Polycab/Havells/RR.

Supply and fixing in replacment of ceiling rose 3 terminal / PVC/ Polycarbonate, insulated body ISI Marked complete all as specified and directed.

Disconnecting mains connection and taking out old distribution board 8/12 way SPN with 200 amp rated bus bar including Mcbs for credit complete all as specified & directed.

Supply and fixing in replacment of factory made, sheet steel distribution boards,SPN 8 ways. double door, suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus bar complete all as specified and directed.

Supply and fixing in replacment of MCBs, 10 KA rupturing capacity, IS-8828 marked, of the under mentioned type and rating and fixing in DBs (DBs Catered separately in this schedule) :- Note : Make of the MCB should be the same as that of DB.

MCB SP 6 to 32 Amps complete all as specified and directed. Make:-Indoasian/Havells/Legrand.

MCB SP 40-63 Amps complete all as specified and directed. Make:-Indoasian/Havells/Legrand.

MCB SPN 40-63 Amps complete all as specified and directed. Make:-Indoasian/Havells/Legrand.

Supply and fixing in replacement LED fitting surface mounted 36 watt ( 2X2 ft ) white 230 Volt AC complete including connecting up with three core twisted flexible copper conductorr cable all as specified and directed. Make : CG Cat Part No LCTLSNE-36-FO-CDL(2X2) or equivalent in Havells/Philips.

Supply and fixing LED Tube Light of 20Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 18 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified. Make-CG cat part no.-LCTL-18-CDL, or equivalent in Havells/Philips.

Supply and fixing LED Mirror light of 3.6 Watt 230Volt ,chrome colour complete with E14 lamp base & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified. Make-Philips cat part no.-34034/14/86 or equivalent in CG/HAVELLS .

Material and labour for taking down of ceiling fan of any size and servicing complete, greesing, painting ,changing of ball bearing of any type,Copper rewinding (if required)and marking of MES No. etc at site and refixing complete all as specified and directed.

Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc. as required complete all as specified and directed.

Material and labour for taking down of exhaust fan of any size and servicing complete, greesing, painting ,changing of ball bearing of any type,Copper rewinding (if required)and marking of MES No. etc at site and refixing complete all as specified and directed.

Supply and fixing in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TPN 100 Amp,25KA as incomer & MCB SP 32/40 Amp of 10 KA capacity of 12 Nos as out going including taking down of old unsv loadline DB complete with MCCBs for credit complete all as specified.

Supply and fixing MCCB, 4 pole, 415 volt of capacity 100 amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc.complete all as specified and directed. Make : Legrands cat part No 4202 17 or equivalent in Havells/L&T

BEHAL TRADERS