ADDN ALTN TO BILLET NO P 40 02 FOR ACCN OF AGNIVEERVAYU (WOMEN) AT AF STATION SINGARSI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises all as specified and directed by Engr-in-Charge

M&L for coloured non skid premium quality ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20mm thick screed bed in CM (1:6) complete all as specified and as directed.

M&L Glazed premium quality ceramic coloured designer seamless tiles 450X300X7 mm thick on vertical surface as in skirting, dado set and jointed with neat cement slurry and pointed in white or coloured cement to match with the surface over and including 10mm thick screed in CM 1:3 complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons all as specified and directed by Engr-in-Charge.

M&L for Machine cut kota stone slab flooring 18-20mm thick over 20mm cement screed base laid in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge.

M & L Granite 18-20mm thick (of any type) work (table rubbed and mirror polished in slab top, steps, jambs, pillars, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including chemfering and rounding the edges complete all as specified and as directed..

Demolition of reinforced cement concrete in any position (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance 50m at low lying area complete all as specified and as directed.

M&L reinforced cement concrete nominal mix type B1 (1:2:4) using 20 mm graded stone aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC (nominal mix) Type B1(1:2:4) (using 20mm gradded stone aggregate) as in beams and lintels above1.50m clear span etc. complete all as specified and as directed.

Formwork to side and soffits of floor or roof beams,lintels etc flat for fair finished surfaces complete all as specified and as directed.

Use and waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia or securing with clip and confirming to grade Fe-410-W(Gde-250) complete all as specified and as directed.

--do-- but 5mm dia and over upto and incl. 10mm dia in stirrups spacers and binders complete all as specified and as directed.

M & L for providing precast cement concrete 1:3:6 Type C0 (12.5mm gradded aggregate) louvres and jallies, 25mm thick (measured solid), including all mould- ings setting in CM (1:6) complete all as directed.

Demolition of Brickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as directed.

M &L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and as directed.

M &L for brick work with sub class 'B' old size bricks straight or curved on plan to any radius in half brick thick walls built in cm 1:4 complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 on brick wall and finished even and fair without using extra cement complete all as specified and as directed.

Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on brick work or concrete surfaces, finished even and smooth without using any extra cement complete all as specified and as directed.

M&L for preparation of old plastered surfaces of walls surface and and applying one coat of Cement based paint complete all as specified and as directed.

M&L for preparation of new surface and and applying two coats of cement base paint over a coat of white cement primer on walls complete all as specified and as directed.

M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 1 to 2mm wall care putty complete all as specified and as directed.

M & L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with birla white putty and brooming to remove all dirt etc and applying two coats of distemper over one coat of alkali resistant primer over 1mm wall care putty complete all as specified and as directed.

S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor complete all as specified and as directed.

S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S&F in repairs Vitreous china water closet pan ( pedestal pattern), white including fixing bolts etc including plastic water closet seat, black/white closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, coupling, strainer, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and as directed.

S&F in repairs Vitreous China Wash hand basin white Oval shape, size 580 mm x 450 mm size, excluding taps, chain & plug & porcelain stopper but incl brackets, 40/32 mm dia chromium plate coupling 32 mm dia, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed.

S&F in repair Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair complete all as specified and as directed.

S&F in repair fancy type 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe complete all as specified and as directed.

S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 125mm and flange complete all as specified and as directed.

S&F in repair fancy type 15mm bore dia of conceled stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S/F as in repairs of 15mm dia, two way long body bib cock with wall flanges fixed with iron pipe complete as spacified and directed by Engr -in-Charge. Make ESSCO /Prayag/johnson/jaquar or equivalent as approved by engr in charge .

S&F in repairs tubular towel rail brass chromium plated , 20mm dia, 60cm long between flanges in repairs. Make- Prayag or equivalent complete all as specified and as directed.

S&F in repairs PVC (SWR) floor trap 75 mm Dia Outlet , plain with CP grating including joining and solvent cement complete all as specified and as directed.

S&F in repair HDPE pipes of pressure rating 6kgf/sqcm of 32mm bore for outlet pipe of WHB complete all as specified and as directed.

S&F in repairs CP soap dish complete all as directed

S&F Sheet glass shelf/corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long as in repairs complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 110mm dia bend any raius all as specified and directed.

S&F PVC (SWR) 75mm dia bend any raius all as specified and directed.

S&F 50 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm fixed complete to walls, ceiling or in floors etc including cutting, chasing, pinning and making floor good with existing one all as directed

Cutting chases,pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for concealed water tubing and making good, cutting not exc.10cm girth complete all as specified and as directed.

Taking up or down steel tubing pipe with connections for cleaning for refixing or removing or storeyard complete of bore 15mm complete all as specified and as directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm complete all as specified and as directed.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm complete all as specified and as directed.

S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M & L Preparation of old wood and wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc complete all as specified

M&L for Preparation of old plastered or unplastered surfaces of walls including Cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes , filling cracks with birla white putty and brooming to remove all dirt etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing rubbish to a distance n.exc 50m at low lying area complete all as specified and as directed.

M & L for 50mm thick cement concrete M-15(1:2:4) type B-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete all as specified and diredted.

Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specifed and directed.

Providing and fixing 6mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements).

S&F of Prepainted GI snap grid frame work for false ceiling all as specified and directed by Engr-In-Charge.. NOTE: (The rate inclusive of scaffolding and necessary arrangements).

S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified . NOTE: (The rate inclusive of scaffolding and necessary arrangements).

Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames) complete all as specified and as directed..

All as per serial item No. 64 above but exc 1.50 Sqm and n.exc 4 Sqm each complete all as specified and as directed.

Dismantling old particle boards/plywood as in shelves boarding, any description, fixed in any position with nails complete all as specified and directed.

S & F solid PVC door frame of size 50 x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet, reinforced with MS square tube, in opening complete all as specified and as directed.

S&F Solid PVC double Door frame of size 50mm x 95mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet,reinforced with M.S. tube, suppling & fixing in opening as specified and directed by Engr-in-Charge

S&F factory made solid PVC moulded door designer shutter 30 mm thick comprising of With 30mm thick Wood free EPS in centre core, with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on both face all as specified and directed by Engr-in-Charge

S/F, Solid PVC Wall Lining wooden finish consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and preparing existing surface and fixing at site on as cupboard etc as specified and directed

S/F 18mm thick Solid PVC Sandwich Panel with 1mm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing fixed as in shelving of cupboard etc complete all as specified and as directed.

S&F in repairs harrison rails, anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and as directed.

S&F Stainless steel butt hinges 100mm size, medium weight cold rolled mild steel complete all as directed.

S&F 150 mm length aluminum, anodised, barrel tower bolts of extruded section complete all as directed.

S&F 100mm size of aluminum handles, cast type anodised complete all as directed.

S&F Mild steel framed work as in grills, with ends of bars shouldered work conforming to Fe-410-0 as per existing grills at site complete all as directed.

S & F of Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balanceing white lamination fixed for cupboard and shelving/shutter complete all as specified and directed.

M&L for 100 mm long aluminium anodised Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.

S&F repair tubular brass chromium plated decorative 20mm curtain rod fixing with brackets complete all as specified.

S&F repair fancy type powder coated decorative curtain rod bracket and holder for fixing curtain rod complete all as specified.

M& L steel ventilator with top hung shutter including hinges steel peg stay , complete all as specified and as directed.

S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified .

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.

S&F aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). Mild steel hinges type B-21 100mm long (3 no.) suitable handle (2 no.) complete all as specified

S&F aluminium powder coated window and ventilator shutters, fixed type without sash bars, aluminium sections including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). Mild steel hinges type B-21 100mm long (3 no.) suitable handle (2 no.) complete all as specified

S&F Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc) sheets in roof covering including ridges complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge/flusing/eves board of width or girth not less than 600mm complete all as specified and as directed.

M&L for Mild Steel work as in flat iron for fix the steel framework for eaves board and wind tie complete all as specified and as directed .

Taking down carefully unserviceable copper / aluminium point wiring (light, fan, bell socket or power) including all fittings such as switches, socket, ceiling roses , regulators and fittings complete and making good the disturbed surfaces all as directed by Engineer-in-Charge.

M&L for point wiring for one light/fan/bell with single core PVC insulated and unsheathed stranded FRLS copper conductor cable 1100 volts grade size 1.5 Sqmm (nominal area) in and including PVC casing capping 25/20 mm width with one single core PVC insulated unsheathed 1.5 Sqmm (nominal area) stranded FRLS copper conductor as earth continuity wire and connected to earth dolly including PVC switch board on existing wall surface for one light/fan point /bell point controlled by one number one way switch & making good the disturbed surface to match with existing surface/wall complete all as specified and as directed.

All as per Item No 95 here-in-before but for one 5 pin socket outlet 5 Amps on independent board with 1.5 Sqmm complete all as specified and as directed.

All as per item No 95 here-in-before but for one 5 pin socket outlet 5 Amps on the same board with other switches complete all as specified and as directed.

All as per Item No 95 here-in-before but for one 5 pin socket outlet 15 Amps on independent board with 2.5 Sqmm copper cable FRLS & 2.5 Sqmm FRLS copper cable for earth continuity wire complete all as specified and as directed.

S&F for socket flush type 6 Amp 5 Pin complete complete all as specified and as directed.

S&F for switch piano flush type 6 Amp single pole one way complete all as specified and as directed.

S&F for switch socket combination 5 Pin 6 Amp universal complete all as specified and as directed.

S&F for switch socket combination 5 Pin, 6/15 Amp universal complete all as specified and as directed.

S & F ceiling rose, 3 phase/PVC/Polycarbonate, isolated body complete all as specified and as directed.

S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 8 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed.

S&F sheet metal enclosures for DB’s double door suitable for mounting of MCB’s/Isolators, 240 Volt, SPN, 4 way with built in bus bar complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed.

S&F VTPN distribution board with provision of MCCB as incommer, double door suitable for mounting MCB's/Isolators, 240 Volt,4 way with built in160A rated bus bar and with out MCCB complete after taking down old unserviceable DB's and including making good the distrubed surface and matching with existing colour complete all as specified and as directed.

M&L for MCCB, 4P, 415V, overload adjustable 0.63 - 0.8-1 x in short circuit fixed 63 Amps breaking capacity 16KA complete all as specified and as directed.

M & L for MCB, SPN, 240 V, 40 to 63A Amps, and ‘C’ series breaking capacity 10 KA complete ISI marked , all as specified and as directed.

M & L for MCB, SP, 240V,40 Amps and ' B ' series breaking capacity 10 KA ISI marked complete, all as specified and as directed.

M & L for MCB, SP, 240V, 6 to 32 Amps and ' C ' series breaking capacity 10 KA ISI marked complete, all as specified and as directed.

S&F metal clad box enclosure with socket plugtop and MCB SP 20 Amp flush of 240v mounting enclosure with 2 pin earth plug socket complete all as directed

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed by Engr-in-charge.

S&F wall mounted LED 2 feet 10 Watt fittings with high diffuser , driver holder extruded aluminium heat sink provided for energy efficient heat dissipation &integrated electronic incl all accessories and lamp ,internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by Engr-in-charge.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including making provn for hanging of ceiling fan with hooks, fastner and pipes and taking out old fan and depositing it in E/M Store etc all complete all as specified and as directed by Engr-in-charge.

S&F Smart Fan Rod or Anti Suicide Fan Rod for ceiling fans 1200 mm sweep having following specifications /sizes in white color, Thickness of Rod = 1.84(+/-0.05) mm on zinc plated MS Pipe with zinc plated spring mechanism, MSME Tested for 15 Kg weight bearing capacity and breaking at impact load of 22Kg+, the fan down rod opens from its center and spring hidden in pipe, expands to land person on ground safely. Make: Gold Life or equivalent

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm all as specified and as directed by Engr-in-charge. Note: Making of hole in wall and making good and taking out old exhaust fan and depositing in E/M store) should be included in quoted rates.

Supply and fix electric water heater, storage type steel body with suitable inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. all as specified and as directed by Engr-in-charge. Note: Taking out old geyser and depositing in E/M store should be included in quoted rates.

Supply and fix 3 in 1 Rechargeable LED Desk Lamp ( Off-White, Small ) Make Havells Modern LHEXBZPNFN1W4X5 (4.5W) or equivalent

Supply and fixing sub main wiring with two run of single core 4 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 4.0 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping and including taking out old sub mian wiring and making good all as specified and as directed . Note : (i) Two run of single core cable 4 sq mm and one run earth wire 4.0 sq mm will be measured as one length.(Make: RR,KEI and Finolex for copper Cable and Prestoplast/Plaza for casing/conduit)

Supply and fixing sub main wiring with two run of single core 6 Sqmm PVC insulated unsheathed stranded cable (FRLS) copper conductor drawn through PVC casing caping with all fittings including 6.0 sq mm PVC insulated unsheathed single core copper conductor as earth wire and including PVC casing caping and including taking out old submain wiring and making good all as specified and as directed. Note : (i) Two run of single core cable 6.0 sq mm and one run earth wire 6.0 sq mm will be measured as one length.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick burried in ground (earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level, connected to earth lead with 4mm dia GI wire as earthing lead by means of bolts, nuts, check nuts, and washers of GI or steel, GI wire protected by 15 mm bore medium grade GI pipe and other end connected to earth test point as directed including funnel with GI watering pipe 20 mm bore medium grade, wire mesh charcoal or coke common salt laid in altrnative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC(1:3:6) type C-1, 50 mm thick pre-cast RCC(1:2:4) type B-1 normally mix cover slab reinforced with in 8 mm dia TMT bar 10 cm C/C both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft/loose/hard soil and disposal of soil to a distance n.exc 50 m and necessry testing on completion all as shown in electrical plate No 3 MES schedule part-I complete all as specified and as directed.

Schedule of Credit

M/S SINGH ENTERPRISE (BID ID -3174189)

M/S KUMAR AVINASH (BID ID -3169759)

SHARMA ENTERPRISE (BID ID -3178633)

M/S MBS TRADING CO (BID ID -3178687)

M/S New Builders Corporation (BID ID -3179093)