REPAIR TO DRAIN, PATH, HARDSTANDING, WALLS AND SECURITY FENCING AT RAKHMUTHI MIL STN AND ITS OUTSTATIONS UNDER GE(S) AKHNOOR.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and as directed .

Brickwork with subclass ‘B’ bricks, old size bricks, straight or curved on plan exceeding 6.0mtrs mean radius built in cement mortar 1:6, complete all as specified and as directed .

Brickwork with subclass ‘B’ bricks, old size bricks, straight or curved on plan exceeding 6.0mtrs mean radius built in cement mortar 1:6 but except bricks, complete all as specified and as directed .

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and as directed .

Rendering 15mm thick, on fair faces of brick or concrete surfaces, in cement mortar 1:4, rendering is to be finished even and smooth (without using extra cement), complete all as specified and as directed .

M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer, complete all as specified and as directed.

M&L for preparation of new plastered or unplastered surafaces of walls and applying two coat of cement base paint different colour in different shape in camouflage pattern to match the existing colours of wall over a coat of alkali resistant primer, complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), including cleaning, removal and disposal of rubbish/ waste materials from premises, complete all as specified and as directed .

M&L for plain cement concrete 1:3:6, type C-2 using 40 mm graded crushed stone aggregate as in surface channel and drains, beds, complete all as specified and as directed .

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc, complete all as specified and as directed .

Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, including all type of tiles irrespective of size and removal of debris outside the MoD land, complete all as specified and as directed .

Chequered cement concrete coloured tiles size 300mmx300mmx20-25mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 20mm thick screed bed or bedding layer in cement mortar 1:6 , complete all as specified and as directed .

M&L for Duratuff pave-n-park cement concrete coloured tiles size 300mmx300mmx8-10mm, with chequered finish, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over 15mm thick screed bed or bedding layer in cement mortar 1:6, with grey cement and no pigment, complete all as specified and as directed .

M&L for 75 mm thick plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregates as in sub bases of floors and pavings, complete all as specified and as directed .

M&L for machine pressed precast concrete interlocking paver block of any size and shape (red and yellow colour only) confirming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigment, including dismantling of existing paver block, complete all as specified and as directed .

M&L for machine pressed precast concrete interlocking paver block of any size and shape (red and yellow colour only) confirming to IS 15658-2006 of 80mm thickness M-40 grade with grey cement and no pigment, including dismantling of existing paver block, complete all as specified and as directed .

M&L for 25mm thick sand filling under floor or in foundations or in floors including watering and consolidation, complete all as specified and as directed .

M&L for plain cement concrete type B-1 (1:2:4), cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and as directed .

Supplying and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete including necessary earth work, complete all as specified and as directed .

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground posts embedded in concrete, complete all as specified and as directed .

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate in) foundations, filling and mass concrete, complete all as specifed and as directed .

M&L for mild steel works as in fencing posts and struts including cutting tops to bottom shape as directed, drilling holes notching for wire etc flat iron fillets for securing razor wire etc including all drilling bolting riveting etc and similar works conforming to FE 290 gde E-165, complete all as specifed and as directed .

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome/ red oxide primer, complete all as specified and as directed .

M&L for preparation of old painted steel surfaces of any description except roof top, not otherwise described, over 10cm width or girth including and applying one coat of synthetic enamel paint, complete all as specified and as directed .

Supply only Chain link fencing MS galvanised fencing, any size or type , complete all as specified and as directed . (Note - Dia of main bar 4mm and cross bar 4mm)

Fixing only in repair chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts etc including provission of binding wire and fixing with MS angle iron fencing posts , complete all as specified and as directed .

S & F of 10 mm dia 50mm Length Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long,complete all as specified and as directed .

M&L for dismantling old rusted barbed wire from fencing of any type including staples or steel pins, etc. (each line wire to be measured), complete all as specified and as directed .

M&L for Galvanised, 2-strand, steel barbed wire 2.24 mm dia barbed with 2.0 mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and as directed .

All as per srl item No 29 above but fixing only, complete all as specified and as directed .

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of cement based paint, including curing of cement base paint , complete all as specified and as directed .

M&L for preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls and applying two coats of cement based paint, complete all as specified and as directed .

S&F for mild steel galvanised concertina coil fencing with punched tape concertina coil of any dia as per site requirement, 10 metre openable length (total length 142 mtrs), having 50 Nos. rounds per 6.0 metre length, spring core wire (2.5 mm dia galvanised wire) of high tensile strength not less than 400-450 gm/ Sqmm with tape (0.52mm thick) and weight 2.0 Kg/metre and fixing the same with existing Y-shaped angle iron placed 2.0mtrs apart and with 6 horizontal R.B.T. (Reinforced Barbed Tape) wire, stud tied with G.I. staple sand, 125 to 127 Nos. of G.I. clips in one coil, to retain horizontal, including necessary nuts and bolts, including taking down existing rusted/damaged concertina coil, complete all as specified and as directed .

M&L for formwork to fair finished surface of concrete to sides of pillars, posts, struts, piers, columns and stanchion, complete all as specified and as directed .

M&L for reinforced cement concrete (nominal mix) type B-0 1:2:4 (12.5 mm graded stone aggregatge) for columns, pillars, piers, posts and struts all as per specified , complete all as specified and as directed .

Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and direted

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and direted

M&L for dismantling wrought iron or mild steel work of any description not otherwise specified for as in framed work in doors or gates of angle or other section complete with steel sheeting or other covering, complete all as specified and as directed .

M&L for Mild steel work conforming to Fe 290 Gde E-165 as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (inclusive of MS steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed .

All as per srl item No 39 above but fixing only, complete all as specified and as directed .

M&L for preparation of old/ decorated, un-decorated, plastered or unplastered surfaces of walls including complete removal of existing treatment and applying two coats of cement based paint in camouflage pattern different colour, complete all as specified and as directed .

M&L for preparation of old plastered or unplastered surfaces of walls and applying one coat of Exterior Emulsion paint (any colour), complete all as specifed and as diretced.

Demolition of reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Please Enable Macros to View BoQ information