NIT No. 621/TC/EinC/PWD/26-27

OFFICE OF THE EXECUTIVE ENGINEER E/M DIVISION PWD KANKER (C.G.)

TERMS & CONDITION

NAME OF WORK :- Providing E/F in the 100 seater Girls Hostel building For PVTG students of Middle School Kudhur Dist. Kondagaon (C.G.)

1. Electric installation shall be carried out in accordance with the General Specification for Electrical Works (Part - I Internal) & (Part - II Exlernal) 1972 of C.P.W. D. adopted by E- In-C M.P.W.D. Bhapal & also : Confider With Indian Electrical Rule 1956 as amended. Up to Date.

2. Civil contractor should Sublet the Electrical Work only those Electrical contractor who are Registered in PWD for Electrical Work as following class.

(I) "D" Class Electrical Contractor - Up to 1.00 Crore

(II) "C" Class Electrical Contractor - Up to 2.00 Crore

(III) "B" Class Electrical Contractor - Up to 10.00 Crore

(IV)"A" Class Electrical Contractor - Unlimited

3. Contractor will submit along with final bill.

(a) Completion Certificate

(b) Completion Plan drawn to a suitable seale on tracing cloth with ink. Indicating Location of main switch , D.B. Circuit fitting and their location

4. The Contractor will be fully responsible for any accident damages and losses occurred due to negligence of work. The amount of the losses and damages etc. Will be recovered from the Contractor.

5. The Contractor shall have his own tools and plants, helmet, hand gloves, first aid box and other safety measures. In good working condition for staff, no Extra payment shall be made for this arrangement and no Claims shall be paid by the department.

6. The Contractor himself shall be fully responsible for any accident casualty of the staff if occurs due to Electrical fault or any other reason during the work and no claim will be paid for such accident of causality by the department.

7. The Contractor will be fully responsible for taking all of safety measures during contract period.

(a) Electrical power supply arrangement temporarily at site will be made by contractor No payment will be made by PWD Department

(b) Earthing system should be installed in presence of A. E. (e/m)/ Sub Engineer (E&M)

8. Earth Continuity conductor of required size & material should be installed with entire run of wiring Earth nut bolt must be provided at all switch boards All metallic parts Ceiling fan tube fitting socket out let should be essentially connected to earth.

9. All Connection of ceilling fan, tube fixture, street light fixture shall be made by Core PVC/ Rubber sheathed cable of required.

10. The Civil contractor should have a Electrical Supervisor for Electrical works at site as per Norms of C.G./ M.P. Govt. who Electrical Diploma/ Degree Holder as Required as per PAC Amount.

To enable entering data into the sheet, please click on 'Enable Editing'.

Please insert items from 12th row.

Every row will be considered as a distinct item.

The row, in which the two fields- 'Item Code' and 'Description' are blank, will not be considered.

If 'CREDIT ITEM' is not entered, default value '0' will be taken.

If 'Calc Field' is not entered, default value 'N' will be taken.

MAX ITEM LIMIT IN EACH EXCEL FILE IS 1000

Name of work : NIT SCHDULE FOR CONSTRUCTION OF 100 SEATER HOSTEL BUILDING FOR PVTG STUDENTS INC SANETARY FITTING AND ELECTRIFICATION WORK AT MARDAPAL DISTRICT KONDAGAON PAC: 257.65 LACS

SERIAL No. Department SOR Year Item Code Description UOM Rate Quantity Amount Ref Serial No CREDIT ITEM (0/1) Calc Field(Y/N) Offset/Reserve Price EMD Amount

1 PWD PWD BLD 2015 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). Sqm 7.20 5625.00 40500.00 0 0 N

2 PWD PWD BLD 2015 1.1 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. In all types of soil cum 185.00 1285.60 237836.00 0 0 N

3 PWD PWD BLD 2015 1.6 1.6.1 Extra for every additional lift of 1.5 m or part thereof. All types of soils cum 26.50 174.63 4628.00 0 0 N

4 PWD PWD BLD 2015 3.1 3.1.3 Providing and laying nominal mix cement concrete with crushed stone aggregate using concrete mixer in foundation, plinth and at ground level excluding cost of form work. - 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.00 243.43 722987.00 0 0 N

5 PWD PWD BLD 2015 3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4073.00 10.94 44559.00 0 0 N

6 PWD PWD BLD 2015 2.1 2.1.1 Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: - Foundations, footings, base of columns and plinth beam in any shape and size. cum 139.00 862.02 119821.00 0 0 N

7 PWD PWD BLD 2015 2.1.5 Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: - Columns, Pillars, Piers and likes- rectangular or square in shape Sqm 297.00 1540.10 457410.00 0 0 N

8 PWD PWD BLD 2015 2.1.6 Columns, beams & walls- circular or any other geometrical shape other than square and rectangular in all sizes Sqm 356.00 21.60 7690.00 0 0 N

9 PWD PWD BLD 2015 2.1.8 Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: - Beams, lintels, cantilevers & walls Sqm 202.00 1342.91 271268.00 0 0 N

10 PWD PWD BLD 2015 2.1.7 Providing and fixing formwork including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: - Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) Sqm 235.00 1972.59 463559.00 0 0 N

11 PWD PWD BLD 2015 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. Sqm 184.00 27.32 5027.00 0 0 N

12 PWD PWD BLD 2015 2.1.4 Edge of slab, breaks in floor and walls upto 200mm. Metre 34.00 500.40 17014.00 0 0 N

13 PWD PWD BLD 2015 2.1.13 2.1.13 Weather shade, chhajja, Cornices and mouldings Sqm 294.00 105.76 31093.00 0 0 N

14 PWD PWD BLD 2015 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings Sqm 230.00 67.78 15589.00 0 0 N

15 PWD PWD BLD 2015 3.2 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. - 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.00 828.97 3451002.00 0 0 N

16 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 97.50 279.48 27249.00 0 0 N

17 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 195.00 449.96 87742.00 0 0 N

18 PWD PWD BLD 2015 3.12 3.12.2 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete: - Thermo-Mechanically treated bars FE 500D Kg 54.50 97052.08 5289338.00 0 0 N

19 PWD PWD BLD 2015 7.5 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.00 377.82 1232827.00 0 0 N

20 PWD PWD BLD 2015 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushedstone aggregate 20mm nominal size) including form work. cum 4237.00 4.66 19744.00 0 0 N

21 PWD PWD BLD 2015 1.25 1.25.1 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite treatment:(Five year service guarantee bond to be signed by contractor) Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm Sqm 27.50 681.08 18730.00 0 0 N

22 PWD PWD BLD 2015 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer. Kg 43.50 509.83 22178.00 0 0 N

23 PWD PWD BLD 2015 3.15 Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm 93.50 27.31 2553.00 0 0 N

24 PWD PWD BLD 2015 3.16 Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with sand including finishing the top smooth. Sqm 273.00 163.86 44734.00 0 0 N

25 PWD PWD BLD 2015 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering with a lead upto 50 M. and lift upto 1.5 M. cum 65.00 1143.59 74333.00 0 0 N

26 PWD PWD BLD 2015 1.19 Providing filling and compacting local earth (from approved source pit) in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 242.00 540.00 130680.00 0 0 N

27 PWD PWD BLD 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 371.00 1456.52 540369.00 0 0 N

28 PWD PWD BLD 2015 7.5 7.5.4 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) cum 3263.00 403.76 1317469.00 0 0 N

29 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 121.00 397.21 48062.00 0 0 N

30 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 242.00 231.69 56069.00 0 0 N

31 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: cum 363.00 137.21 49807.00 0 0 N

32 PWD PWD BLD 2015 7.11 7.11.2 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level: Cement Mortar 1:4 (1 cement : 4 coarse sand) Sqm 382.00 282.24 107816.00 0 0 N

33 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Sqm 11.00 302.94 3332.00 0 0 N

34 PWD PWD BLD 2015 11.3 11.3.4 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: - In Cement Mortar 1:6 (1 cement : 6 fine sand) Sqm 107.00 3440.02 368082.00 0 0 N

35 PWD PWD BLD 2015 11.2 11.2.4 Providing and making 12mm thick cement plaster of mix: - In Cement Mortar 1:6 (1 cement : 6 fine sand) Sqm 91.50 3668.50 335668.00 0 0 N

36 PWD PWD BLD 2015 11.32 11.32.4 Providing and making 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand) per cm width: Drip course M 3.60 555.70 2001.00 0 0 N

37 PWD PWD BLD 2015 11.32 11.32.2 Sunk Bands Metre 3.00 250.20 751.00 0 0 N

38 PWD PWD BLD 2015 11.5 Neat Cement punning. Sqm 33.00 97.76 3226.00 0 0 N

39 PWD PWD BLD 2015 11.9 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. Kg 43.50 257.63 11207.00 0 0 N

40 PWD PWD BLD 2015 9.16 9.16.2 Providing and fixing M.S. frames of doors, windows, ventilators and cupboards joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10cm of grade M-10 or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as required including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Angle-iron frames Kg 73.50 3565.80 262086.00 0 0 N

41 PWD PWD BLD 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. Kg 67.50 3346.13 225864.00 0 0 N

42 PWD PWD BLD 2015 8.12 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) Sqm 2005.00 10.08 20210.00 0 0 N

43 PWD PWD BLD 2015 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. Sqm 3330.00 7.20 23976.00 0 0 N

44 PWD PWD BLD 2015 9.13 9.13 Providing and fixing steel door/ window with M.S. sheet 1mm thick, frame of angle iron, diagonal braces of angle/ flat iron of suitable size, 3.00 mm M.S. gusset plates at junctions and corners, all necessary fittings complete including applying a priming coat of red oxide zinc chromate primer. Kg 75.00 1932.00 144900.00 0 0 N

45 PWD PWD BLD 2015 8.148 8.148.1 Providing and fixing factory made UPVC door frame made of UPVC profile section having an overall dimension as below (tolerance ± 1mm) with wall thickness 2.0mm ± 0.2mm, corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm ± 0.1mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge Extruded section Profile size 48x40 mm Metre 191.00 230.00 43930.00 0 0 N

46 PWD PWD BLD 2015 8.150 Providing and fixing factory made 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mm X 25mm or less as per requirement with an average wall thickness of 1mm ± 0.3mm. PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. An M.S. tube having dimensions 19mm x 19mm is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25mm X 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufactures' specification. Sqm 2583.00 77.28 199614.00 0 0 N

47 PWD PWD BLD 2015 12.76 12.76 Ammended up to 04.05.2018 Providing and laying Glazed Vitrified floor tiles (GVT/PGVT) with digital print of random design with water absorption less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in colorus, shades and size mentioned below (+/- 10mm), laid on 20mm thick cement mortor 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size 600x600mm thickness 9 to 10mm Sqm 964.00 1502.25 1448169.00 0 0 N

48 PWD PWD BLD 2015 12.74 (Amd) 12.74.1 Providing and fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades over 20mm thick bed of cement mortar 1:3 (1 cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mexed with matching pigment complete. Size 300x300mm thickness 7 to 8mm Sqm 779.00 1101.01 857687.00 0 0 N

49 PWD PWD BLD 2015 12.46 12.46.1 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone grey/pink Sqm 1869.00 195.54 365464.00 0 0 N

50 PWD PWD BLD 2015 12.3 12.3.2 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. - 50 mm thick Sqm 254.00 370.12 94010.00 0 0 N

51 PWD PWD BLD 2015 14.56 Providing and applying 2mm thick white cement based polymeric Exterior grade Putty with minimum 3 coats applied @ 5.4 kg/ 10Sqm as per relevant IS code 17545:2021 (Product such as Birla wall care, Asian trucare,JK wall putty, Berger Bison wall putty) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. Sqm 86.00 5617.30 483088.00 0 0 N

52 PWD PWD BLD 2015 14.58 Providing and applying water proofing cement paint mimimum 2 coats applied @3.84 kg/10 sqm up to required finish as per relevant I.S. code 5410:2013 of required shade (product such as Snowcem plus, J.K. Shri Cement paints century Cement Paints, Apex paints Maxcoat cement paint )with all tool tackles and labour etc. complete for the work Sqm 53.00 3823.84 202664.00 0 0 N

53 PWD PWD BLD 2015 14.53 White washing/ Colour washing with lime to give an even shade in Three or more Coats for New surface as per relevant IS code 6278:1971 Consumption of lime 3.50kg /10 Sqm with all tools tackles and labour etc. complete for the work. Sqm 14.00 1639.44 22952.00 0 0 N

54 PWD PWD BLD 2015 14.62 Providing and applying Acrylic washable Distemper or lite cconomy Plastic emulsion paint having VOC content less than 50gms/ lit Minimum two coats up to final finish applicd @ 1.25 Kg/ 10Sqm as per relevant L.S. Code 428:2000 (product such as Tractor Uno, Dulux Duval, Berger Bison, Opus Style/lite economy emulsion product such as Asian Tactor Spark Dulux Pomise sheen, Neroloc Litil Master, Berger Bison Lite, Nippon Superio.) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour complete for the work Sqm 64.00 3473.19 222284.00 0 0 N

55 PWD PWD BLD 2015 14.61 Providing and applying Synthatic oil bound washable Distemper having VoC content less than 50gms/ lit. Minimum two coats up to final finish to give an even shade applied 1.25 kg / 10Sqm as per relevant I,S. Code 428:2000 (product such as Asian Tractor synthatic distemper , Berger Bison Lite , Dulux Magik , Birla Opus Style super smart) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc. complete for the work. Sqm 57.00 217.68 12408.00 0 0 N

56 PWD PWD BLD 2015 8.137 8.137.1 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm each 228.00 20.00 4560.00 0 0 N

57 PWD PWD BLD 2015 8.138 8.138.2 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 250mm each 85.00 20.00 1700.00 0 0 N

58 PWD PWD BLD 2015 8.139 8.139.2 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 200 x10mm each 70.50 20.00 1410.00 0 0 N

59 PWD PWD BLD 2015 8.140 8.140.1 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete. 150 mm each 24.50 20.00 490.00 0 0 N

60 PWD PWD BLD 2015 8.144 8.144.1 Providing and fixing stainless steel fixed stopper with necessary stainless steel screws complete. 100 mm long each 96.50 20.00 1930.00 0 0 N

61 PWD PWD BLD 2015 8.120 8.120.2 Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickel plated iron nuts bolts and screws etc complete. 250x16mm each 141.00 20.00 2820.00 0 0 N

62 PWD PWD BLD 2015 8.121 8.121.2 Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete. 250x12mm each 51.50 20.00 1030.00 0 0 N

63 PWD PWD BLD 2015 8.123 8.123.2 Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete. 125 mm each 26.00 20.00 520.00 0 0 N

64 PWD PWD BLD 2015 9.47 9.47.2 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/loor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approvedshade according to IS: 1868, minimum anodic coating shall be of gradeAC-15. (Glazing to be paid for separately: 24.50 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). Kg 338.00 1147.50 387855.00 0 0 N

65 PWD PWD BLD 2015 9.51 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness Sqm 708.00 153.00 108324.00 0 0 N

66 PWD PWD BLD 2015 9.44 Providing and fixing “NETLON insect screens” with 25mm wide Hook and loop tape all around to wooden/ aluminium/ steel windows, ventilators and the like complete. Sqm 278.00 153.00 42534.00 0 0 N

67 PWD PWD BLD 2015 19.4 19.4.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia .Pipes. Metre 199.00 38.40 7642.00 0 0 N

68 PWD PWD BLD 2015 19.4 19.4.4 32 mm nominal outer dia .Pipes. Metre 271.00 148.60 40271.00 0 0 N

69 PWD PWD BLD 2015 19.5 19.5.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc., 15 mm nominal outer dia .Pipes. Metre 133.00 282.10 37519.00 0 0 N

70 PWD PWD BLD 2015 19.5.3 25 mm nominal outer dia .Pipes. Metre 213.00 136.40 29053.00 0 0 N

71 PWD PWD BLD 2015 19.6 19.6.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm nominal outer dia pipes Metre 165.00 96.30 15890.00 0 0 N

72 PWD PWD BLD 2015 19.6.4 32 mm nominal outer dia pipes Metre 228.00 135.50 30894.00 0 0 N

73 PWD PWD BLD 2015 19.14 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) each 382.00 50.00 19100.00 0 0 N

74 PWD PWD BLD 2015 19.14.2 Long nose bib cock (500 grams) each 455.00 20.00 9100.00 0 0 N

75 PWD PWD BLD 2015 19.14.5 Two way bib cock (800 grams) each 708.00 15.00 10620.00 0 0 N

76 PWD PWD BLD 2015 19.14.6 Stop cock (concealed) (600 grams) each 494.00 75.00 37050.00 0 0 N

77 PWD PWD BLD 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.00 35.00 1785.00 0 0 N

78 PWD PWD BLD 2015 19.16 19.16.2 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end): 32 mm nominal bore. each 510.00 25.00 12750.00 0 0 N

79 PWD PWD BLD 2015 19.17 19.17.3 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore each 432.00 26.00 11232.00 0 0 N

80 PWD PWD BLD 2015 19.18 19.18.1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore each 413.00 4.00 1652.00 0 0 N

81 PWD PWD BLD 2015 19.18.2 32 mm nominal bore each 556.00 8.00 4448.00 0 0 N

82 PWD PWD BLD 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Litre 7.30 8000.00 58400.00 0 0 N

83 PWD PWD BLD 2015 19.50 Constructing masonry Chamber 120x120x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 11021.00 1.00 11021.00 0 0 N

84 PWD PWD BLD 2015 20.28 20.28.1 Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 455x610 mm and 45 cm deep for single pipe line each 3796.00 15.00 56940.00 0 0 N

85 PWD PWD BLD 2015 20.28 20.28.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : each 4357.00 5.00 21785.00 0 0 N

86 PWD PWD BLD 2015 20.28.3 Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : each 4894.00 6.00 29364.00 0 0 N

87 PWD PWD BLD 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 1709.00 3.00 5127.00 0 0 N

88 PWD PWD BLD 2015 18.1 18.1.3 Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Orissa pattern W.C. pan of size 580x440 mm each 2899.00 26.00 75374.00 0 0 N

89 PWD PWD BLD 2015 18.17 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm each 1430.00 17.00 24310.00 0 0 N

90 PWD PWD BLD 2015 18.20 18.20.2 Providing and fixing stainless steel AISI-304(18/8) wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : Size 510x410 mm each 4095.00 3.00 12285.00 0 0 N

91 PWD PWD BLD 2015 18.25 18.25.1 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia each 68.50 21.00 1439.00 0 0 N

92 PWD PWD BLD 2015 18.26 18.26.2 Providing and fixing PVC waste coupling in wash basin/ sink. 40 mm each 61.00 21.00 1281.00 0 0 N

93 PWD PWD BLD 2015 18.27 18.27.2 Providing and fixing cast iron grating for gully trap. 30.00 18.27.1 100x100mm square or round 150x150mm square each 38.00 22.00 836.00 0 0 N

94 PWD PWD BLD 2015 18.55 18.55.1 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm each 61.00 12.00 732.00 0 0 N

96 PWD PWD BLD 2015 20.2 20.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 150 mm diameter S.W. pipe metre 436.00 each 436.00 234.90 102416.00 0 0 N

97 PWD PWD BLD 2015 18.76 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. Metre 182.00 100.30 18255.00 0 0 N

99 PWD PWD BLD 2015 18.77 18.77.1 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. Tee/ Tee with door/ Bend 45°/ Bend 90° 75 mm each 113.00 205.00 23165.00 0 0 N

101 PWD PWD BLD 2015 18.77.2 18.77.2.1 Double "Y" with or without door 75 mm each 129.00 30.00 3870.00 0 0 N

104 PWD PWD BLD 2015 18.77.4 18.77.4.1 Access door cap 75 mm each 49.50 71.00 3515.00 0 0 N

106 PWD PWD BLD 2015 18.77.5 "P" trap 110mmx110mm long each 227.00 123.00 27921.00 0 0 N

107 PWD PWD BLD 2015 18.77.6 Nahani trap 110x75mm each 90.50 75.00 6788.00 0 0 N

108 PWD PWD BLD 2015 18.77.7 Multi floor trap 110 each 122.00 7.00 854.00 0 0 N

109 PWD PWD BLD 2015 18.77.8 Plain reducing Tee 110x75mm each 129.00 48.00 6192.00 0 0 N

110 PWD PWD BLD 2015 18.78 18.78.2 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 61.00 366.00 22326.00 0 0 N

111 PWD PWD BLD 2015 9.40 Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) up to 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in- charge with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) metre Metre 164.00 400.00 65600.00 0 0 N

112 PWD PWD BLD 2015 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) Point 1502.00 1.00 1502.00 0 0 N

113 PWD PWD BLD 2015 21.2 21.2.1 21.2.1.3 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. All types of soil 150 mm dia. Metre 371.00 130.00 48230.00 0 0 N

114 PWD PWD BLD 2015 21.2 21.2.2 21.2.2.3 Rocky strata including Boulders. 150 mm dia. Metre 424.00 70.00 29680.00 0 0 N

115 PWD PWD BLD 2015 21.5 21.5.3 Supplying, assembling, lowering and fixing in vertical position in bore well, ISI marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part-1&Part-2) 1992 with IVth revision (Up-to-date amendments), of reputed & approved make, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer- in-charge. 150 mm nominal dia Metre 1304.00 120.00 156480.00 0 0 N

116 PWD PWD BLD 2015 21.11 21.11.3 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150mm dia each 217.00 1.00 217.00 0 0 N

117 PWD PWD BLD 2015 21.19 Providing and fixing 80-100 mm dia PVC ball valve for inlet/ outlet of rain water harvesting pipe and filter. each 644.00 20.00 12880.00 0 0 N

118 PWD PWD BLD 2015 12.3 12.3.1 Cement concrete flooring with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm) finished with a floating coat of neat cement. 40 mm thick Sqm 222.00 6.48 1439.00 0 0 N

119 PWD PWD BLD 2015 21.18 Providing and fixing 80-100 mm dia PVC ball valve for inlet/ outlet of rain water harvesting pipe and filter. each 700.00 2.00 1400.00 0 0 N

120 PWD PWD BLD 2015 20.28 20.28.3 Providing and constructing brick masonry chamber for underground pipe and and bends with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design : Inside dimensions 600x 850 mm and 45 cm deep for pipe line with three or more inlets : each 4894.00 6.00 29364.00 0 0 N

121 PWD PWD BLD 2015 20.28 20.28.2 Inside dimensions 500x700 mm and 45 cm deep for pipe line with one or two inlets : each 4357.00 10.00 43570.00 0 0 N

122 PWD PWD ROAD 2025 3.2 Excavation in Soil (byMechanicalMeans.) Excavationfor roadwayin soil using mechanical means including loading intipperforcarryingofcutearthto embankmentsite and unloadingwith all leads & lifts as per relevant clauses of section 300. cum 103.00 195.75 20162.00 0 0 N

123 PWD PWD ROAD 2025 3.14 Construction of Embankment/sub-grade with Material Deposited from Roadway Cutting Constructionofembankment/sub-gradewithapprovedmaterialshavingrequiredC.B.R.forembankment/sub- grade(unless specified otherwise inthecontract) depositedatsitefromroadwaycuttingandexcavationfromdrainandfoundationofotherstructuresgraded and compacted tomeet requirement of table 300-2. . cum 82.00 156.60 12841.00 0 0 N

124 PWD PWD ROAD 2025 3.12 Construction ofembankment withMaterial Obtained from Borrow Pits/Borrow Area Construction of embankment with approved material/ selectedsoilhavingC.B.R.>5 (unlessspecified otherwise in the contract) obtained from borrow pits/borrow area with all lifts and leads, transporting to site,spreading,gradingtorequiredslopeandcompacting to meet requirement of table 300-2. cum 238.00 274.50 65331.00 0 0 N

125 PWD PWD ROAD 2025 4.1 (B) GranularSub-baseasperTable:-400-1 Construction of granular sub-base by providing graded Material, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface watering, rolling and compacting with vibratory powerrolleratOMCtoachievethedesired density,completeasperclause401. Plantmixmethod(withMechanicallycrushedstone only) (b) ForLowerSub-basewith (ii) Grading-VI Material cum 1536.00 140.18 215309.00 0 0 N

126 PWD PWD ROAD 2025 6.3 (ii) Providing and laying cement concrete for plain concrete/ reinforced concrete i/c form work, shuttering complete in as per drawings and specifications.( For Villageroads) P.C.C. M-15 cum 4312.00 63.79 275054.00 0 0 N

127 PWD PWD ROAD 2025 6.4 ProvidingandlayingUn-reinforcedCementConcrete without Dowel bars including formwork and expansion, contraction &longitudinal jointsasperdesignandasper IRC-62, overaprepared baseaperapproved mixdesign and finising to lines and grade as per Drawing for Pavement thickness less than 200mm in Low Volume Roads.With CementconcretegradeM-30andminimum cementcontent@375kg/cum cum 4748.00 118.13 560858.00 0 0 N

128 PWD PWD ROAD 2025 4.11 B ConstructionofShoulders Constructionofshoulderswithselectedsoilfromborrowpits/borrowareashavingCBRnotlessthan12andshall have L.L. and P.I. not more than 25% and 6% respectively, inclusive of all leads and lifts, including clearing and scrapping of existing surface, providing requiredcrossfall,compacting.watering,rollingetc.completeasperclause408. WithSmoothwheeled roller cum 313.00 91.13 28522.00 0 0 N

129 PWD PWD ROAD 2025 9.6 Providing 1st class bedding below pipes with graded sandorothergranular materials passingthrough 5.6 mm sieve as per clause 2904. cum 749.00 25.00 18725.00 0 0 N

130 PWD PWD ROAD 2025 9.5 A ProvidingandlayingReinforcedCementConcrete pipe NP 3 / prestressed concrete pipe on first class bedding Laying Reinforced cement concretepipe NP3 /prestressed concrete pipe complying to IS:458,with ends casted as per the requirements of flush jointing of pipes for culverts on first class bedding of granular materialincluding joints duely filled and finished with cement mortar 1:2 but excluding excavation, protection works,back filling, concrete and masonry work sin head wall sand parapets. 450 mm dia Meter Metre 1650.00 40.00 66000.00 0 0 N

131 PWD ELECT 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 266.00 76.00 20216.00 0 0 N

132 PWD ELECT 2020 1.7.1 Short Point Point 424.00 152.00 64448.00 0 0 N

133 PWD ELECT 2020 1.7.2 Medium Point Point 588.00 302.00 177576.00 0 0 N

134 PWD ELECT 2020 1.8 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 420.00 4.00 1680.00 0 0 N

135 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216.00 80.00 17280.00 0 0 N

136 PWD ELECT 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 922.00 29.00 26738.00 0 0 N

137 PWD ELECT 2020 1.10.3 Long Point Point 1302.00 20.00 26040.00 0 0 N

138 PWD ELECT 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 1350.00 6.00 8100.00 0 0 N

139 PWD ELECT 2020 1.11.3 Long Point Point 1807.00 6.00 10842.00 0 0 N

140 PWD ELECT 2020 1.11.4 Extra Long Point I Point 2315.00 3.00 6945.00 0 0 N

141 PWD ELECT 2020 1.11.5 Extra Long Point II Point 2825.00 6.00 16950.00 0 0 N

142 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 92.00 165.00 15180.00 0 0 N

143 PWD ELECT 2020 1.13.1 3 X 1.5 sq. mm in 20mm conduit Point 111.00 368.00 40848.00 0 0 N

144 PWD ELECT 2020 1.13.2 3 X 2.5 sq. mm in 20mm conduit Point 172.00 219.00 37668.00 0 0 N

145 PWD ELECT 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit Point 238.00 98.00 23324.00 0 0 N

146 PWD ELECT 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit Point 288.00 78.00 22464.00 0 0 N

147 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. Point 80.00 2.00 160.00 0 0 N

148 PWD ELECT 2020 5.4.9 Fan regulator (two module size) electronic stepped type moving all rounds Point 223.00 115.00 25645.00 0 0 N

149 PWD ELECT 2020 5.4.22 Batten/ angle holder Point 41.00 108.00 4428.00 0 0 N

150 PWD ELECT 2020 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification. Point 107.00 2.00 214.00 0 0 N

151 PWD ELECT 2020 5.9 Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification. Point 42.00 53.00 2226.00 0 0 N

152 PWD ELECT 2020 5.11 Providing and fixing fan clamp made of 3mm thick MS flat on existing iron trusses/ girder including necessary bolts and nuts etc. as per specification. Point 40.00 62.00 2480.00 0 0 N

153 PWD ELECT 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. Point 1697.00 115.00 195155.00 0 0 N

154 PWD ELECT 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 Point 2446.00 31.00 75826.00 0 0 N

155 PWD ELECT 2020 6.17 Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. Point 215.00 108.00 23220.00 0 0 N

156 PWD ELECT 2020 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. Point 443.00 129.00 57147.00 0 0 N

157 PWD ELECT 2020 6.21 Supplying, installation, testing and commissioning of following LED tube light fitting {Inverter Type: with builtin battery backup} including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification. IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. Point 997.00 40.00 39880.00 0 0 N

158 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt. Point 2729.00 4.00 10916.00 0 0 N

161 PWD ELECT 2020 6.69 Supplying, installation, testing and commissioning of following LED fitting (luminaries) down lighters in round/ square shape shall be made up of Die Cast Powder coated housing complete with electronic driver ,heat sink and all other accessories on surface/ in false ceiling etc. as per specification. P.F. should be greater than 0.9 LED chip efficacy ratio ≥ 100 lumens /watt and Total harmonic distorsion (THD) of less than 10%. Point 1888.00 50.00 94400.00 0 0 N

163 PWD ELECT 2020 7.11 Providing and fixing porcelain re-wireble fuse carrier and base unit on wooden board including drilling holes on the board, screws, connections etc. as per specification. (Thimbeling shall be paid separately). Point 544.00 4.00 2176.00 0 0 N

164 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification. Point 6818.00 2.50 17045.00 0 0 N

165 PWD ELECT 2020 7.21 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) copper (electric grade) bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification. Point 1319.00 8.00 10552.00 0 0 N

167 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu. Point 1483.00 1.00 1483.00 0 0 N

168 PWD ELECT 2020 9.1.1 3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA Point 2385.00 8.00 19080.00 0 0 N

169 PWD ELECT 2020 9.1.3 3 pole MCCB, 25-100A, Adjustable Thermal Release, 18KA Point 7428.00 2.00 14856.00 0 0 N

170 PWD ELECT 2020 9.4 Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) Point 2038.00 8.00 16304.00 0 0 N

171 PWD ELECT 2020 9.10 Supplying and fixing SP MCB, 240 volts, 'B' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. Point 151.00 158.00 23858.00 0 0 N

172 PWD ELECT 2020 9.16 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. Point 1316.00 8.00 10528.00 0 0 N

173 PWD ELECT 2020 10.8 Providing and fixing metal clad, TP&N motorized change over switch unit, 415/500 volts, including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as per specification. Point 26803.00 1.00 26803.00 0 0 N

174 PWD ELECT 2020 10.15 Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification. Point 349.00 3.00 1047.00 0 0 N

175 PWD ELECT 2020 10.10 Providing and fixing metal clad, TP&N 415/500 volts, By Pass Switch Unit with sheet steel enclosure including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as per specification. Point 13641.00 3.00 40923.00 0 0 N

176 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Point 94.00 13.00 1222.00 0 0 N

177 PWD ELECT 2020 10.21 Providing and fixing penal mounting selector switch in existing cubical panel including, connections, testing and commissioning etc. as per specification. Point 189.00 1.00 189.00 0 0 N

178 PWD ELECT 2020 10.21.1 For voltmeter Point 207.00 1.00 207.00 0 0 N

179 PWD ELECT 2020 10.23 Providing and fixing panel mounting digital type VAF (Volt-amp-frequency combined) Multi Function meter of size 100x100 (NS) in existing cubical panel including connection, testing and commissioning etc. as per specification. Point 1201.00 1.00 1201.00 0 0 N

180 PWD ELECT 2020 12.4 Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification. Point 77.00 90.00 6930.00 0 0 N

181 PWD ELECT 2020 12.6 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode at 0.5 Metre depth below ground level including excavation and refilling the trench etc. as per specification. Point 752.00 34.00 25568.00 0 0 N

182 PWD ELECT 2020 12.19 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification: Point 10995.00 5.00 54975.00 0 0 N

183 PWD ELECT 2020 12.19.1 With 3 metre long GI Pipes and 50 kg back filling compound. Point 8222.00 12.00 98664.00 0 0 N

184 PWD ELECT 2020 12.20 Excavation for foundation in soft soil/hard soil including dressing of sides and ramming of bottoms, lifting and getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres Point 168.00 28.12 4724.00 0 0 N

185 PWD ELECT 2020 13.1 Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong at top, with 85 mm dia 3 mm thick copper base plate having 4 nos holes for fixing etc. complete as per specification. Point 767.00 5.00 3835.00 0 0 N

186 PWD ELECT 2020 13.2 Making jointing of copper tape (with another copper tape, base of the finial or any other metallic object) by reverting, sweating and soldering/ nut bolting of as per specification. Point 51.00 15.00 765.00 0 0 N

187 PWD ELECT 2020 13.3 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For horizontal run) Point 217.00 190.00 41230.00 0 0 N

188 PWD ELECT 2020 13.4 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as per specification.(For vertical run) Point 219.00 45.00 9855.00 0 0 N

189 PWD ELECT 2020 13.5 Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuck nuts and spring washers etc. complete as per specification. Point 93.00 12.00 1116.00 0 0 N

190 PWD ELECT 2020 14.1 Supplying and laying ISI marked double wall HDPE pipe (IS 14930 Part II) having corrugation on the outer wall and plan surface on inner wall in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification. Point 184.00 540.00 99360.00 0 0 N

191 PWD ELECT 2020 14.5 Supplying and fixing G.I. pipe along with wall or pole/ support with 2 Nos MS clamps for protection of under ground cable in approved manner including bolts and nuts or metal dash fasteners complete as per specification. Point 403.00 10.00 4030.00 0 0 N

192 PWD ELECT 2020 15.1 Supplying and laying following sizes one number FRLS PVC insulated/XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade direct in ground at a depth not less than 40 cm and upto 90 cm including excavtion, sand cushioning, protective covering and refilling the trench etc as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). Point 293.00 310.00 90830.00 0 0 N

195 PWD ELECT 2020 15.24 Supplying and making end termination with brass compression gland and copper lugs for following size armoured copper conductor power cable of 1.1 KV grade as per specification. . Point 110.00 8.00 880.00 0 0 N

198 PWD ELECT 2020 19.3 Supply of swaged steel tubular pole as per IS 2713 with base plate of size 300x300x6mm welded at bottom, necessary hole for cable entry and earthing stud welded at specified height including painting with one coat of red oxide zinc chromate primer. Point 11825.00 6.00 70950.00 0 0 N

199 PWD ELECT 2020 19.4 Supply of GI PIPE POLE made of "B" class GI pipe making necessary hole for cable entry and providing earthing stud (welded at specified height) including painting with one coat of red oxide zinc chromate primer. Point 398.00 6.00 2388.00 0 0 N

201 PWD ELECT 2020 19.9 Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification. Point 1509.00 6.00 9054.00 0 0 N

202 PWD ELECT 2020 19.10 Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length: Point 1681.00 1.00 1681.00 0 0 N

203 PWD ELECT 2020 19.10.2 3.5 metre to 5.0 metre Point 2610.00 6.00 15660.00 0 0 N

204 PWD ELECT 2020 19.13 Providing and making suitable CC pole collar (muffing) in Cement Concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) of size 0.4 m dia and 0.4 m height from existing CC foundation. Point 251.00 6.00 1506.00 0 0 N

205 PWD ELECT 2020 19.17 Supplying and fixing PVC water tight terminal box of approved make and brand with detachable gland plate in bottom, hinged front openable cover, rubber gasket, having 1 Nos 4way connector and 1 No SPMCB inside the box for cable connection, fixed to pole with 2 Nos clamp made from 25x3mm GI flat with 2 No GI nuts bolts complete as per specification. Point 989.00 6.00 5934.00 0 0 N

206 PWD ELECT 2020 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. Point 17589.00 1.00 17589.00 0 0 N

207 PWD ELECT 2020 23.6 Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification. Point 118.00 76.00 8968.00 0 0 N

208 PWD ELECT 2020 23.7 Supplying and fixing of following sizes GM gate valve ISI mark in the suction/ delivery line etc. as per specification. Point 1058.00 1.00 1058.00 0 0 N

209 PWD ELECT 2020 23.8 Supplying and fixing of following sizes GM non return valve ISI mark in the suction/ delivery line etc. as per specification. Point 1246.00 1.00 1246.00 0 0 N

210 PWD ELECT 2020 23.11 Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set Point 4030.00 1.00 4030.00 0 0 N

211 PWD ELECT 2020 23.12 Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification. Point 291.00 1.00 291.00 0 0 N

212 PWD ELECT 2020 23.13 Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification Point 388.00 1.00 388.00 0 0 N

213 PWD ELECT 2020 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010). Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant. Point 64.00 76.00 4864.00 0 0 N

214 PWD ELECT 2020 23.15 Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as per specification. Point 261.00 2.00 522.00 0 0 N

215 PWD ELECT 2020 23.16 Supplying and laying of approved make stainless steel wire rope of 6 mm dia for support of submersible pump set complete with tying to pump set and pump holding clamp. Point 16.00 76.00 1216.00 0 0 N

216 PWD ELECT 2020 30.1 Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification. Point 168.00 36.00 6048.00 0 0 N

SAY RS = 257.65 LACS

Department Name Code SOR Name SOR UOM Name UOM Code false53163

36 Incubation Center (AIC 36Inc) Chhattisgarh(36INC) 36INC PHE PHE Percentage %

Atal Nagar Vikas Pradhikaran (ANVP) ANVP PHED PHED1 Per mile %O

Bastar Urban Public Transport Society (BSTUPTS) BSTUPTS RES_BUILDING RESBDG 1 Job 1 Job

Bhoramdev Sahakari Sugar Production Factory-Kabirdham(BSSPFK) BSSPFK NON DSR BUILDING 2018 NON DSR BUILDING 1000 no. 1000 no.

Bilaspur Smart City Limited(BSCL) BSCL BRIDGE PWD_BRIDGE 1000 piece 1000 piece

Bilaspur Urban Public Transport Society (BSPUPTS) BSPUPTS DSR BUILDING 2016 DSR BUILDING 1000No. 1000No.

Chhattisgarh Department of Agriculture (CGDA) CGDA NON SOR NS Print 123

CHHATTISGARH ENVIRONMENT CONSERVATION BOARD(CECB) CECB CPWD DSR 2016 CPWD DSR 2016 Per Diem Rate 1234

Chhattisgarh Handicraft Board (CGHCB) CGHCB PWD ROAD PWD ROAD MAN DAYS 12345

Chhattisgarh High Court, Bilaspur (CGHC) CGHC WRD WRD PRINT 678

Chhattisgarh Housing Board (CGHB) CGHB ELECTRIC ELECT Siemens Per meter A/V

Chhattisgarh Infotech Promotion Society (CHiPS) CHiPS PMGSY SOR PMGSY Acre ACR

Chhattisgarh Kamdhenu Vishwavidyalaya(CGKV) CGKV PWD BUILDLING PWD BLD Price Should be quoted as per SKU in Aneexure-I of Tender Document APT

Chhattisgarh Khadi & Village Industries Board(CGKVIB) CGKVIB DSR ELECTRICAL 2016 DSR ELECTRICAL As per Tender APT1

Chhattisgarh Medical Services Corporation Ltd. (CGMSC) CGMSC Activity unit AU

Chhattisgarh Police Housing Corporation Ltd (CGPHC) CGPHC Bag BAG

Chhattisgarh Railway Corporation Ltd(CRCL) CRCL Batch Batch

Chhattisgarh Rajya Beej Evam Krishi Vikas Nigam (CGRBEKVN) CGRBEKVN Book BK

Chhattisgarh Road Development Corporation Limited(CGRDC) CGRDC Box BOX

Chhattisgarh State Civil Supplies Corp. Limited (SCSC) SCSC Gallons per hour (US) BPH

Chhattisgarh State Co-Operative Marketing Federation Limited(CGMARKFED) CGMARKFED Bottle BT

Chhattisgarh State Cooperative Dairy Federation Ltd.(CGCDF) CGCDF Cubic sentimeter /second C3S

Chhattisgarh State Industrial Development Corporation (CSIDC) CSIDC Canister CAN

Chhattisgarh State Mandi Board (CGSMB) CGSMB Carton CAR

Chhattisgarh State Minor Forest Produce-Trading & Development Co-Operative Federation Ltd (CGMFPFED) CGMFPFED Cubic Centimeter CCM

Chhattisgarh State Power Distribution Company Limited (CGSPDCL) CGSPDCL Cubic decimeter CD3

Chhattisgarh State Power Generation Company Limited (CGSPGCL) CGSPGCL Centiliter CL

Chhattisgarh State Power Transmission Company Limited (CGSPTCL) CGSPTCL cm cm

Chhattisgarh State Renewable Energy Development Agency(CREDA) CREDA Centimeter CM

Chhattisgarh State Warehousing Corporation (CGSWC) CGSWC Square centimeter CM2

Chhattisgarh Text Book Corporation (CGTBC) CGTBC coils coils

CHHATTISGARH TOURISM BOARD(CGT) CGT COILS Coils

Department of Home Guard and Civil Defence Chhattisgarh (HGCD) HGCD Copies Copies

Department of Panchayat and Social Welfare (DPSW) DPSW Crate CRT

Department of School Education (DSE) DSE Case CS

Department of Technical Education (DTE) DTE Cu.Mtr. Cu.Mtr.

Department of Women and Child Development(WCD) WCD cubic feet cubic feet

Directorate Horticulture and Farm Forestry, Chhattisgarh(DHF) DHF cubic feet (CFT) cubic feet (CFT)

Directorate of CG Food And Civil Supplies and Consumer Protection(DSCSC) DSCSC cum cum

Directorate of Fisheries (DF) DF cum.km cum.km

Directorate of Industries(DOI) DOI Days DAY

Directorate of Sports and Youth Welfare(DSYW) DSYW Degree DEG

Directorate of Tribal and Schedule Caste Development(DTSCD) DTSCD DFLT DFLT

DISTRICT POLICE KORBA(DPK) DPK Decimeter DM

Durg-Bhilai Urban Public Transport Society (DBUPTS) DBUPTS Drum DR

Food and Drug Administration (FDA) FDA Dozen DZ

Forest Department(FD) FD EACH EA

Health Department (HD) HD each each

Indira Gandhi Krishi Vishwavidyalaya (IGKV) IGKV each additional floor each additional floor

Inspector General of Registration and Superintendent of Stamps(IGRS) IGRS Each Courty Each Court

Korba Urban Public Transport Society (KRBAUPTS) KRBAUPTS each cut each cut

Koriya Urban Public Transport Society (KRYAUPTS) KRYAUPTS each test each test

Lauh Purush Sugar Plant, Pandariya(LSPSSKM) LSPSSKM each tree guard each tree guard

Livestock Development Department(LDD) LDD each tree guard each tree guard

Mineral Resources Department -Mining (MRD) MRD Each box EB

Office of Chief Electoral Officer, Chhattisgarh(OCEO) OCEO Enzyme Units / Milliliter EML

Panchayat and Rural Development (PARD) PARD Each TAPE ET

Public Health Engineering Department (PHED) PHED Enzyme Units EU

Public Works Department (PWD) PWD Fluid Ounce US FOZ

Raigarh Urban Public Transport Society (RIGUPTS) RIGUPTS Feet FT

Raipur Collectorate (RC) RC Square foot FT2

Raipur Development Authority (RDA) RDA Cubic Foot FT3

Raipur Smart City Limited(RSCL) RSCL Gigajoule FY

Raipur Urban Public Transport Society (RUPTS) RUPTS Gram G

Rajnandgaon Urban Public Transport Society (RNDGUPTS) RNDGUPTS gram act.ingrd /liter G/L

Rashtriya Madhyamik Shiksha Abhiyan(RMSA) RMSA US gallon GAL

Rural Engineering Services (RES) RES Gram Gold GAU

Sarguja Urban Public Transport Society (SUPTS) SUPTS Gram act.ingrd. GI

State Tax Chhattisgarh(STCG) STCG Gram /liter GLI

State Urban Development Agency (SUDA) SUDA Gram/Mol GM

Tribal Welfare Development Department (Balod- Collectorate)(TWDDBALOD) TWDDBALOD Gram/Kilogram gm/kg

Tribal Welfare Development Department (Gariyaband)(TWDD) TWDD Gram /square meter GM2

Tribal Welfare Development Department (Jagdalpur- Collectorate)(TWDDJDP) TWDDJDP Gram/Cubic meter GM3

Tribal Welfare Development Department (Kanker)(TWDDKANKER) TWDDKANKER Gigaohm GOH

Tribal Welfare Development Department (Koriya)(TWDDKORIYA) TWDDKORIYA Gallons per mile (US) GPM

Tribal Welfare Development Department (Rajnandgaon Collectorate)(TWDDRJN) TWDDRJN Gross GRO

Tribal Welfare Development Department, Jashpur(TWDDJSP) TWDDJSP Hour H

Tribal Welfare Development Department(Bemetara Collectorate)(TWDDBC) TWDDBC Hectare HA

Tribal Welfare Development Department(Korba-Collectorate)(TWDDKORBA) TWDDKORBA hectare hectare

Tribal Welfare Development Department(Raipur-Collectorate)(TWDDRC) TWDDRC Hectoliter HL

Tribal Welfare DevelopmentDepartment(Janjgir-Champa-Collectorate)(TWDDJCC) TWDDJCC hour hour

Urban Administration and Development Department (UADD) UADD Hours HR

Water Resources Department (WRD) WRD Hours Hrs

Zila Panchayat Raipur(ZPR) ZPR I/O Point I/O Point

Indian Rupees INR

Joule /kilogram JKG

Kilogram act.ingrd KAI

Kilogram /cubic decimeter KD3

Kilogram/Mol KGM

Kilogram /Second KGS

Kilogram / cubic meter KGV

kg act.ingrd /kg KIK

Kilojoule/kilogram KJK

Kilojoule/Mol KJM

Square kilometer KM2

Kilometer/hour KMH

Kelvin/Minute KMN

Kelvin /Second KMS

Kilonewton per square meter KNM

Kilovoltampere KVA

Liter per 100 km LHK

Liter /Minute LMI

Liter /Molsecond LMS

Liter Per hour LPH

lumpsump lumpsump

1/square meter M-2

Mol per cubic meter M:M

Megawatt hours M..

Meter /Hour M/H

Mol per liter M/L

Meter /second M/S

Square meter M2

Square meter/Coat M2C

Square meter/second M2S

Cubic meter /Hour M3H

Cubic meter/second M3S

Man days Man days

Man-Month Man-Month

Manmonth Manmonth

Milligram/liter MGL

Milligram /cubic meter MGQ

Square mile MI2

Microsecond MIS

ML/GM/KG ML/GM/KG

Milliliter/ Liter ml/l

Milliliter act.ingr. MLI

Square millimeter MM2

Cubic millimeter MM3

Millinewton/meter MNM

Miles per gallon (UG) MPG

Millimol per liter MPL

Millipascal seconds MPS

Meter/second squared MS2

Microsiemens per centimeter MSC

Newton/meter NM

Newton/Square millimeter NMM

one RCC jaali tree guard one RCC jaali tree guard

one RCC jaali tree guard one RCC jaali tree guard

P.cumt. P.cumt.

P.Point P.Point

Per Running Meter Per Box P.R.M.P.BOX

p.sq.mtr p.sq.mtr

P/sq.Mt. P/sq.Mt.

Pascal second PAS

Per Bale Per KM PBPK

Megavoltampere PCT

per cm height per letter per cm height per letter

per cm height per letter per cm height per letter

per cubic centimeter per cubic centimeter

Per Diem Rate Per Diem Rate

Per Km. Per Km.

per letter per letter

per month per month

Per mtr Per mtr

Per packet PER PACKET

per page per page

Per person PER PERSON

Per piece PER PIECE

Per Plants Per Plants

per pouch per pouch

Per running feet PER RUNNING FEET

Per Set Per Set

Per Sqr Km Per Sqr Km

Per square km Per square km

Per Tanker Per Tanker

per test per test

Per thousand PER THOUSAND

per tonne per tonne

per tonne capacity per tonne capacity

Per unit PER UNIT

per.mtr per.mtr

PER SQUARE FEET PERSQF

PER BOREHOLE PH

Parts per billion PPB

Parts per million PPM

Per Person Per Month PPPM

Per Person Per Month Per Shift PPPMPS

Parts per trillion PPT

Number of persons PRS

Pound Per Sq inch PSI

Per Square Feet Per Month PSQPM

Pint, US liquid PT

Per Ton Per KM PTPK

PER UNIT PER YEAR PUPYR

Quart, US liquid QT

quintal quintal

Gramm/cubic centimeter RHO

Running Meter Rmt

RUNNING METRE RMT

Square feet Sq.Ft

Square Meter sqm

Thousand Hours THR

Ton/Cubic meter TOM

DEFAULT UNIT DESCRIPTION XXX

Square Yard YD2

Microgram /liter µGL

Microgram /cubic meter µGQ