Repairs to eaves board, valley gutters and certain misc B/R works in OTM accn and repairs to PGI/CGI/GI sheets and periodical services to certain sheds at MT and TESCO yard at CME

Amount

Dismantling tiling of single layer Mangalore Pattern roof tile laid dry complete all as specified and directed

All as per item No.1 above, but bedded in lime or cement mortar complete all as specified and directed.

M&L for roof tiles, Mangalore Pattern, interlocking at side joints laid dry complete all as specified and directed.

All as per item No.3 above, but except tile complete all as specified and directed.

M&L for ridge tiles, Mangalore Pattern, set and jointed in CM 1:6 complete all as specified and directed.

All as per item No.5 above, but except Mangalore Pattern ridge

Dismantling battens for tiles, shingles etc, of any size including tilting fillets spacing exc 15 cm complete all as specified and directed.

M&L 2nd class hardwood clean sawn battens at 30cm centres of sectional area exc 5 & n.exc 15 sqcm complete all as specified and directed.

All as per item No.8 above, but except battens

Dismantling boarding, any description in any position with nails complete all as specified and directed.

M&L 2nd class hardwood clean sawn weather boarding, plain, 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps complete all as specified and directed.

M&L for preparing the surfaces of tiles batten any size and spacing prepared and treated all over (measured overall on one side only), spaces not deducted with two coats of cresote oil complete all as specified and directed.

All as per item No 12 above, but one coat on old batten surface

M&L for preparing new surface of wood of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F Framed work such as roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde E-250) Quality A complete all as specified and directed.,

Dismantling of wrought iron or mild steel work of any description all as directed.

S & F for 1.25, thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing (length and girth as fixed ) with grade of zinc coating 275 etc complete all as specified and directed

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets) any thickness, including cover fillets all as directed.

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm cross tee of size 24mm x 28mm x 0.7 mm using purpose made members interlocking to each other and with 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacture instruction make of GI Grid work : Armstrong/Swastik/Techno Grid and Make E board Gypsum or equivalent approved .

M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots, moulds, moss effloerent salts and treading oil and greasy spots and applying one coat of white (lime) wash complete all as specified and directed by Engineer-in-Charge

All as specified in Item No 20 above, but applying one coat of white wash on ceiling.

All as specified in item No 20 above, but applying one coat of Oil Bound distemper on walls complete all as specified and directed.

M & L for one coat of synthetic enamel paint over wooden surfaces including preparation of old surfaces over 10cm width or girth all as specified and directed

M & L for painting one coat synthetic enamel paint on steel surface including preparation of old surface of any description , over 10 cm width or girth not otherwise described all as specified and directed

Dismantling of plain or corrugated steel heeting any gauge, thickness, including nainital or similar pattern roof covering all as directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc. complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in ridges, hips, valley, gutters etc. complete all as specified and directed.

S & F galvanised, corrugated mild steel sheeting of 0.63 mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275.

S & F Plain, black, mild steel sheeting of 0.63 mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) all as specified and directed.

M&L coloured chequred cement concrete tiles 30cm x 30cm x 25mm thick set pointed with neat cement slurry with grey cement and pigment in floorsover and including 15mm thick screed bed in cm 1:4 complete all as specified and directed.

M & L machine pressed precast concrete interlocking paver block with grey cement and no pigment, any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with glossy finish, colour shade including sand cushioning as decided by Engineer-in-Charge

Demolition of cement concrete (unreinforced) in ground floors and paving n.exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling stone slab laid bedded and pointed in cement mortar of any description or thickness in floor aprons etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises all as specified and directed.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base complete all as specified and directred

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) and finished even and fair to receive the further treatment complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection including necessary use and waste of form work complete all as specified and directed.

M&L vitrified ceramic coloured tile 8 to 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floor etc, set and jointed in neat cement sluurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No.39 above, but on vertical surface such as skirting, dado etc but including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M/S SANDEEP CONSTRUCTION COMPANY

N AND G CONSTRUCTION

Aakar Construction

Sunrise Traders

vishalconstruction