NAMAKKU NAAME THITTAM 2022-23 Improvement Of Park For Compound Wall and CC Road At Iswarya Nagar Park In Nannilam Town Panchayat

Amount

Bored pile 300 mm dia boring, providing and installing bored cast in situ reinforced cement concrete pile of specified dia meter and length below the pile cap in cement concrete 1:1.5:3 (One Part Cement, One and Half Part M Sand, Three Parts of Agreegate)

Earthwork excavation for foundation in all soil and sub soils of full depth an may be directed refilling the sides of foundation with excavated earth in layers not more than 10 cm thick well complying with standard specification depositing the surplus earth with in the compound in places show by the departmental officers with initial leads and clearing and leveling of site etc., complete complying with standard specification.

Supplying and filling fine river M sand in layer not more than of 15 cm thick including water with all layers and consolidation complying with standard specification including cost and conveyance of sand at site and all labour charges and all other incidental charges etc., complete.

Cement concrete in 1:4:8 (One part of cement, Four part of M sand Eight part of ISS gauge HBG metal) using 40mm ISS gauge HBG metal including cost of conveyance of metal from approved quarry at site including cost of cement and all labour watering including mixing dumpling and laying in layer of not more than 15 cm thick and tampering to consolidation curing and all other incidental any complying with standard specification etc., as per T.N.D.SS.No.28.

Brick work in cement 1:5 mix (One part of cement Five part of M sand) Using well burnt country brick of size 8 ¾ x2 ¼ x2 ¼ including cost and conveyance of the brick at site including cost of cement and all other incidental charges and labour charges etc. complete for foundations and basement T.N.D.S.S. No: 31.

Up to basement

Above basement

Supplying & Erecting of steel centering for sides & soffiots including necessary supports & strutting upto 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90 x 60cm & 10 gauge stiffened, welded with steel angle of size 25 x 25 x 3mm for boarding laid over silver oak joists(Country wood) of size 10 x 6.5cm spaced @ about 90cm c/c and supported by casurina props of 10 - 13cm dia. spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10m2.for the following items.(RCC floor slab, roof slab, Rectangular/ square, Tee/ Ell beams, Lintels, staircase waist slabs, Landing slabs, Landing beam, Portico beam etc., ).

Retaining Wall,Deckslab and Drain sidewallup to 1.00 M

Rate for rectangle column post and sunshade

Reinforced Cement Concrete 1:1 1/2 :3 (One part of cement One and Half parts of Msand Three parts of ISS gauge HBG metal) using 20mm ISS gauge HBG metal including cost and conveyance of metal from approved quarry at site including cost of cement and all labour watering including mixing damping and laying in layer of not more than 15cm thick and tampering to consolidation curing and all other incidental any complying with standard specification etc complete.

Supplying fabricating and placing to position MS or RTS rods including cost of steel, binding wire and labour charges for cutting bending, cranking, tying and lying in position etc., all complete as per standard specifications.

Plastering with CM 1:5 mix 12 mm thick in all floors complying with including cost and conveyance all materials and labour charges for mixing applying and finishing smooth etc., complete as per standard specification.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris, putty, wherever required etc., complete complying with standard specification.

Plain Cement Concrete 1:1½:3 Mix (one Part of cement, One and half Part of M- Sand and three Part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Supplying and laying of Bitumen Pad of 12mm thick for expansion joints at an equal intervels, including cost and conveyance of all materials and labour charges etc, complete