COMPREHENSIVE MAINT AND REPAIR/REPLACEMENT OF FIRE ALARM SYSTEM/FIRE DETECTOR SYSTEM/UV/IR DETECTOR SYSTEM/FOAM PROTECTION SYSTEM / CO2 FLOODING SYSTEM AND OTHER E/M ITEMS IN TECHNICAL AREA

Periodical maintenance of automatic fire alarm and smoke detectors system comprising of following mentioned items including attending fault testing of system, monthly checking of system including preventive maintenance by replacing minor spare parts and technician will attend the complaints at site whenever deffect occur in fire alarm / detection system and rectified complete all as specified and directed:- (a) Existing VISONIC Wireless Fire Alarm Control Panel: Using wireless technology that is highly secure, the PowerMaster-10 G2 which delivers superior range, long battery life with wireless robustness. (b) Existing VISONIC Wireless Smoke and Heat Detector which alerts occupants of the room by activating the built-in 85db alarm buzzer and flashing LED light when smoke or temperature exceeding 57°C (135°F) are detected (c) Existing VISONIC Wireless Outdoor Siren with two-way wireless outdoor siren (IP55). It provides the perfect security solution with a PowerMaster system, outdoor siren and SR-740 PG2 which offers cabling-free installation and optional extended time between battery changes. (d) Existing VISONIC Wireless Repeater extends the communication range between the PowerMaster control panels and other Power devices. Locations: T5, T6, T7, T8, T31, Pioneering Depot, Signal Station, Navy hangar, AFNET, Avionics Lab (33 Sqn), BCR, CCR, HRDF Hut, Transmitter.

Periodical maintenance of automatic fire alarm and smoke detectors system comprising of following mentioned items including attending fault testing of system, monthly checking of system including preventive maintenance by replacing small spare parts and technician shall attend the complaints at site whenever defect occur in fire alarm/detection system and shall rectify complete all as specified and directed:- (a) Existing HONEYWELL 4 Loop Control Panel: Addressable four-loop, fire detection system supports Morley protocol. It comes with two sounder circuits (1A max), a 2A power source, a general relay (Alarm and Fault), one programmable relay, a fixed auxillary output and resettable 24V 250mA output, two keys and two inputs for programmable functions. It also includes a 6 * 40 LCD graphic display. (b) Existing HONEYWELL Smoke Detector: The HM Series photoelectric smoke detectors by Honeywell have a completely new detection chamber design, integrated LED for 360 Deg visibility advanced protocol and smoothing filter to suppress false alarm, EN54-17: 2005 EN54-7: 2000+A1:2002+A2:2006 LPCB approved (c) Existing HONEYWELL Loop Card: Loop Card is designed to fully comply with EN54-23 and is available on EN54 versions of the Vigilon range of panels. The increased power allows for up to 100 EN54-23 sensor-sounder-strobes on a 2km loop, managing up to 200 devices in total (d) Existing HONEYWELL Sounder: VAD-series wall mount sounder beacon is a high quality loop powered device designed to alert building occupants of an emergency. It utilises the B501AP base for improved installation flexibility (e) Existing HONEYWELL Input Output Module: The MI-DMMI and MI-DMM2I use a unique mechanical design allowing each module to be mounted either in a wall box (M200E-SMB) or on a DIN rail (using M200E-DIN). (f) Existing HONEYWELL Heat Detector: Low profile, 2 inches, including base absolute temperature device simple and reliable addressing uses digital communication protocol The SD505-HEAT is UL Listed and meets the requirements outlined in NFPA 72 InspectionTesting and Maintenance. Locations: New ATC, DWR, JFS Test Cell

Periodical maintenance of automatic fire alarm and smoke detectors system comprising of following mentioned items including attending fault testing of system, monthly checking of system including preventive maintenance by replacing small spare parts and technician shall attend the complaints at site whenever defect occur in fire alarm/detection system and rectifed complete all as specified and directed:- (a) Existing HOCHIKI 4 Zone Conventional Panel: Product Code: 0100-19340 The HCV-X series of conventional fire control panels are available with 2, 4, or 8 initiating circuits which may be extensively configured via a simple front panel operated programming method.Standard Features UL864 approved (b) Existing HOCHIKI Smoke Detector: The SOE-24V (UL 268 7th edition listed) is the newly developed multi-spectrum smoke categorization technology Photodiode Supply Voltage Operating Voltage Range 8 – 35VDC Absolute Max Voltage 42VDC Maximum Voltage Ripple 8200mVAC Maximum Input Capacitance 0.01uF Current Consumption Standby Current 59A Minimum Allowable Alarm Current 5mA Maximum Allowable Alarm Current 150mA Startup Time 25s (Max) Current 160A (Max) Reset Time 100ms (Min) Voltage 2.5V (Max) Smoke Density Range 1.82-3.16%/ft@ Open area 1.82-4.55%/ft@300FPM (c) Existing HOCHIKI Flame Detector: The RFD-2000X UV/IR Flame Detector by REZONTECH responds to light frequencies emitted from flames during combustion Rated Voltage 17 - 32 VDC Alarm Current 20mA Relay Contact Voltage 28 VDC max. Relay Contact Current 2A max. Detector Output 4-20mA Wiring Gauge 14 AWG - 24 AWG shielded Range of View 100 ft. (30m) Field of View 90° Horizontal & Vertical IP Rating IP67 Operating Temperature -40°C(-40°F) ~ 75°C(167°F) Storage Temperature -50°C(-50°F) ~ 80°C(176°F) Relative Humidity 95%, (d) Existing HOCHIKI Manual Call Point : HCP-E(SCI) is a Manual Call Point with an integral short-circuit isolator, which is fully compatible with Hochiki’s ESP analogue addressable protocol. The unit incorporates a bi-colored LED.

(e) Existing HOCHIKI Wall Sounder: The BANSHEE EXCEL is an electronic conventional sounder Operating Voltage 9 – 30 Vdc Operating Current (dependant on tone selected) min 6 mA max 39 mA Operating Temperature Range -40 °C to + 70 °C Maximum Sound Output (at 24 Vdc) (dependant on tone selected) 110 dB(A) at 1 metre Maximum Humidity 75% RH. (f) HOCHIKI Repeater Panel: The HFP CP range of conventional fire control panels are high specification IP Rating IP30 Finish Epoxy powder coated Colour - lid & box BS 00 A 05 grey - fine texture Colour - controls plate & labels RAL 7047 light grey - satin Weight 6kg Supply voltage 20-30V DC Mains supply fuse 1.6 Amp 250V Power supply DC rating 24V 1 Amps Maximum battery size 7Ah 12V (2 per panel) Fault contact rating 30V DC1 Amp Fire contact rating 30V DC1 Amp Cable capacity 2.5 mm² per terminal Operating temperature -5°C to +40°C Operating Humidity <95% (non condensing) Location: AVRO hangar 1, AVRO hangar 2, Dornier hangar & 33 Sqn hangar (g) RAVEL Conventional Panel 2 Zone: As per IS -15908: 2011 Standard. 16 X 2 Dot Matrix LCD Display. Standby battery backup with built in charging. Fire / Fault status in unambiguous colored LED indication.Switch Mode Power SupplyTactile Keypad for easy panel operation.System on indication. (h) RAVEL Smoke Detector: UL listed.Dual LED’s for 360° visibility.Advanced detection and communication protocol.Easy installation and maintenance.Sleek low-profile housing design.Regular 100mm base. Operating Voltage 9 ~ 33V DC Operating Temperature:-10 °C to 37.8 °C Storage Temperature:-10 °C to 60 °CHumidity:0 – 95% RH, non-condensing Reset Voltage (j) RAVEL Manual Call Point: Alarm status is indicated By Red colour LED Operates on 24 VDC. Green Colored for Emergency Release. Yellow Colored for Abort. 1 No’s of CO & NC Output (Optional).Operating Voltage :24VDC (k) RAVEL Sounder: Slim and Sleek Wall or Ceiling mountable Mini Horn with BackBox 24VDC Operation They are used in Fire, Burglar & Emergency Alarm System. Operating Voltage:24V DC Operating Current: 40mA Sound.

Periodical maintenance of automatic fire alarm and smoke detectors system comprising of following mentioned items including attending fault testing of system, monthly checking of system including preventive maintenance by replacing small spare parts and technician shall attend the complaints at site whenever defect occur in fire alarm/detection system and shall rectify complete all as specified and directed:- (a) Existing Siemens addressable Fire Alarm Control Panel: Automatic alaram grade 10 to 30 mA, Ac input power 230 V, addressable 5 loop control panel no of addrees 505 upto 8 loop extended programble input output 12 nos . (b) Existing Siemens Smoke and Heat Detector :- 24 Vdc , PVC white automatic, photo electric (c) Existing Siemens Outdoor Siren: (d) Existing Siemens manual call pont & Repeater: (f) Existing Addressable type Flame detectors with UV/IR detection capacity (g) Existing Control CO2 flooding system:- release panel model RE-25AR make- Ravel, UL listed (9th Edison), including switch mode power supply, battery polarity and deep discharge suitable for CO2 flooding system installed at SRE bldg (h) Existing Edward Make control panel at FMS, wireless detectors, hooter/strobe, MCP and indicators Locations: 3 Sqn hangar, 45 Sqn hangar, Tech Flt hangar and FMS Note:- Requirement of tools/lifting vehicle/ladder for maint of UV detector and smoke detector and connected wires shall be inclusive in quoted rate.

S&F in replacement of existing wireless fire alarm control panel using wireless technology with PowerMaster-10 G2 which delivers superior range, long battery life and wireless robustness and with two-way communication eliminates lost alarms and unnecessary re-transmissions and efficiently overcomes interference and jamming through multi-channel frequency hopping with advanced radio technology delivers large transmission range enabling repeater-free installations 30 wireless zones, 8 user codes, Supports partitions,12 or 24-hour battery, A single wired zone, optional LTE and IP modules, available in multiple languages including taking down of old unserviceable one complete all as specified and directed. Locations: T5, T6, T7, T8, T31, pioneering Depot, Signal Station, Navy hangar, AFNET, Avionics Lab(33 Sqn), BCR, CCR, HRDF Hut, Transmitter

S&F in replacement of existing wireless smoke and heat detector which sends early warnings in case of smoke or fire with a fully supervised, photoelectric smoke and heat detector and to give alerts occupants of the room by activating the built-in 85db alarm buzzer and flashing LED light when smoke or temperature exceeding 57°C (135°F) are detected and to transmits a coded signal to the control panel to activate the system siren, alerting the end user and / or central monitoring station to send onsite assistance with fully ceritifed by the most stringent internal standards includes additional alerts for low battery, smoke sensor trouble, maintenance required, device tampering, and test mode with ultra-reliable, two way 128-bit AES encrypted communication including taking down old unserviceable one complete all as specified and directed. Locations: T5, T6, T7, T8, T31, pioneering Depot, Signal Station, Navy hangar, AFNET, Avionics Lab, BCR, CCR, HRDF Hut, Transmitter

S&F in replacement of existing Wireless Outdoor Siren with two-way wireless outdoor siren (IP55) with a PowerMaster system with SR-740 PG2 to offer cabling-free installation and optional extended time between battery changes with fully wireless outdoor siren designed for installation in areas in which wiring is dificult with the sounder is activated for a predefined "Bell Time" according to local authority's requirements, or until the system is disarmed including taking down old unserviceable one complete all as specified and directed. Locations: T5, T6, T7, T8, T31, pioneering Depot, Signal Station, Navy hangar, AFNET, Avionics Lab(33 Sqn), BCR, CCR, HRDF Hut, Transmitter

S&F in replacement of exisitng Wireless Repeater which extends the communication range between the PowerMaster control panels and other PowerG devices with receives alarm, status and control messages from the wireless devices and sends these messages to the control panel with visible link quality indication shows directly on the device, compact and easy to install and LED indications for power failure, activity and installation performance diagnostics with transmission range by far greater than the industry standard including taking down old unserviceable one complete all as specified and directed. Locations: T5, T6, T7, T8, T31, Pioneering Depot, Signal Station, Navy hangar, AFNET, Avionics Lab(33 Sqn), BCR, CCR, HRDF Hut, Transmitter

S&F in replacement of existing L 4 Loop Control Panel with addressable four-loop, fire detection system supports Morley protocol with two sounder circuits (1A max), a 2A power source, a general relay (Alarm and Fault), one programmable relay, a fixed auxiliary output and resettable 24V 250mA output, two keys and two inputs for programmable functions also includes a 6 * 40 LCD graphic display, integrated USB port for PC programming and an RS485 port for repeaters with DXc2 which can operate as a stand-alone or as part of a networked system with other DXc series panels up to 16 loops includes CD contains a loop and battery calculator, manuals and programming software that allow the display to be customised and address labels to be imported from an Excel file, total Loop Capacity (396 Detector +396 Devices) Networking up to 16 loops 6x40 characters including taking down old unserviceable one complete all as specified and directed. Locations: New ATC, DWR, JFS Test Cell