WBPWDTE/EE/BED/NIQ_15/Q of 2025-26

Amount

Distribution wiring in 1.1 KV grade 2x22/0.3(1.5sqmm)single core stranded'FR' PVC insulated & unsheathed copper wire (Make:-Havells/RR Kabel/Finolex/Gloster/Mescab/KEI) partly in 20mmsize PVC rigid conduit 'FR' (Precision make) [for ceiling portion only]andin 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded inwall], with1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, tolight/fan/call bell points with Modular type switch (Brand approved by EIC ) fixed on Modular GI switch board complete with 2 no. suitable size “Ph&N” copper bar with top cover plate making earthing attachment fixed on wall incl.mending good damages to original finish. [only PVC Rigid Conduit on ceiling and remaining portion concealed Average run 8 mtr

Average run 9 mtr

Distn. wiring in 3 X 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point with Modular type plug socket & switch as per GS. On Board

Supplying and fixing 415V, TPN Main switches with sheet steel enclosure on angle iron frame on wall with nuts bolts etc incl DIN type HRC fuse as per GS [Make L&T/Siemens/Schneider/ABB] 315A

Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc. 160A (L&T/Havells/standard/Siemens/ABB)

Supplying and fixing 415V, TPN SFU with Sheet Steel enclosure with 03 nos DIN type HRC fuse on angle iron frame on wall with nuts bolts etc. 100A (L&T/Havells/standard/Siemens/ABB)

Supplying & fixing sheet metal inspection box (16 SWG) of the following sizes ( in mm) flushed in wall as per GS 175 x 100 x 65

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS. (Make-Legrand/L&T/ABB/Siemens) 4 way (upto 160A)

8 way (upto 160A)

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall as per GS. 8 way ( Make - Legrand/L&T/ABB/Siemens).

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+12 Way [Make- Legrand/L&T/ABB/Siemens]

2+16 Way [Make- Legrand/L&T/ABB/Siemens]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/L&T/ABB/Siemens] 40 A DP

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as per GS. [Make-Legrand/L&T/ABB/Siemens] 6-32 SP

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA in existing Vertical DBs including necessary connection as per GS [ Make -Legrand/L&T/ABB/Siemens]. 160 A FP

Supplying and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Make:-Havells/RR Kabel/Finolex/Gloster/Mescab/KEI) of the following sizes in the prelaid polythene pipe as per GS. 2x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

2x36/0.3 (2.5 sqmm)+1x 22/0.3 (1.5 sqmm)

2x 4 sqmm+1x 2.5 sq.mm.

2x 6.0 sqmm + 1x 4 sqmm

S & laying of 50 sq. mm. 1.1 KV grade PVC insulated 'FR' stranded single core copper cable in prelaid PVC rigid conduit as per GS.

Cutting Channel of required size on masonry wall by Electric operated cutting machine incl. supplying & fixing of heavy gauge Polythene pipe of following diameter as per GS. 19 mm dia 3 mm thick

25mm dia 3 mm thick

Supply & Fixing 240 V, 2 nos. 5 A, 3 pin Modular type plug socket with 2 nos. 5 A Modular type switch (Brand approved by EIC), Indicator without plug top on GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc, with connector as per G.S.

Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch, 16A Modular switch type MCB as per GS

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 6 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per G.S

Supply & Fixing 240 V, 2 nos 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 2 nos 16A Modular type switch, without plug top on 6 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per G.S

Supply & Fixing 240 V, 1 nos 16 A & 1 No 6A, 3 pin Modular type plug socket (Brand approved by EIC) with 1 nos 16A & 1 No 6 A Modular type switch, without plug top on 6 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. as per G.S

Supply & Fixing 240 V, 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing 240 V, 2 nos. 16 A & 2 Nos 6A 3 pin Modular type plug socket with 2 nos. 16A & 2 Nos 6A Modular type switch (Brand approved by EIC), 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply of 4/3.5 Core XLPE Insulated & Sheathed Armoured Aluminium Conductor cables for Working Voltage up to 1100 Volts of following sizes [ Make-Gloster/Mescab/Polycab/RR Kabel/ Havells] 4 Core 95 sq.mm. [NS]

4 Core 70 sq.mm. [NS]

4 Core 50 Sq. mm [ NS ]

4 Core 25 Sq. mm [ NS ]

4 Core 35 Sq. mm [ NS ]

2 Core 10 Sq. mm [ NS ]

Laying of cable after cutting floor/pavement/wall as per GS for the following Sizes. 2.5 to 35 Sq. mm [ 5(i)/ F- 3 ]

above 35 to 95 Sq. mm [ 5(ii)/ F- 3 ]

Supplying and fixing compression type gland and finishing those for following XLPE / PVC armoured cable (2/4 / 3.5)Core by crimping method incl S&F solderless socket (dowells make) as per GS. 4 Core 95 sq.mm.

4 Core 70 sq.mm.

4 Core 50 Sq. mm

4 Core 25 Sq. mm

4 Core 35 Sq. mm

2 Core 10 Sq. mm

Excavation of soil for installation of Earth Electrode and filling & ramming as per GS For Morum Soil

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level as per GS By ISI M GI pipe

Connecting the equipments body to earth busbar including s & F Solid GI (Hot Dip) wire of size as below as per GS. 4 SWG

Supply & Fixing earth busbar of galvanised (Hot Dip) MS Flat 25 mm x 6 mm on wall as per GS.

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.

Supplying &fixing sheet metal (16SWG)Iron Clad Busbar chambers on angle iron frame on wall, incl. Earthing attachment and painting as required–( As per Drawing no. 470 of PWD Specification Book – May 1991) 4 bars 415V,315A (4x40x5)mm of 1 mtr length as per GS

SUB-HEAD - SUPPLY OF LIGHT FITTINGS Supply of 4 Ft. single/twin LED light fitting for indoor application, complete with all accessories & LED tubes having following Model / Cat No.( Make -Philips) TMC 502 1xT-LED 22W with 1 no. MAS LED tube 18W 2100 Lm 865 T8 ( Pc)/ equivalent make of CG/Surya)

TMC 502 2xT-LED 22W with 2 nos MAS LED tube 18W 2100 Lm 865 T8 ( Pc)/ equivalent make of CG/Surya)

S&F 9 W LED light fitting. (Make Philips/CG/Surya)

SUB-HEAD -FIXING OF LIGHT FITTINGS Fixing only florescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports etc as per G.S

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit as per GS

SUB-HEAD -- FIXING OF FANS Supply & Fixing 240 V Modular Socket type fan regulator (Step type)(Brand approved by EIC) on existing sheet metal switch board as per GS

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc as per GS

Fixing only exhaust fan after making holes in wall as per GS (12")

Supply & Fixing GI sheet (20SWG) metal Cowl with MS flat iron frame & GI wire mesh on wall as per GS (12")

Supply & Fixing of 200mm dia PVC decorative ceiling cover plate for ceiling fans

SUB-HEAD -- SUPPLY OF FANS Supply of ceiling fans complete with all accessories having the following Model / Cat No. ( Make -Crompton Greaves ) a. 1400 mm Sweep (orient summer cool/ Aura Metallic / USHA STRIKER)

Supply of Exhaust fans complete with all accessories having the following Model / Cat No. ( Make -EPC/ Orient/USHA ) 12"( 300mm ) Speed 920 RPM

S & F 450 mm Wall Fan Tornado Wall II Make -Orient/Usha/Crompton

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Legrand-Model Arteor/Myrius or equivalent model of Crabtree/Equivalent make as per direction of E.I.C), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply & Fixing 240 V,25 A, 3 pin Modular type plug top with indicator (Legrand-Model Arteor/Myrius or equivalent model of Crabtree/Equivalent make as per direction of E.I.C) & necy. Connections.

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc

S&F of 240V,70 W LED Street light make Crompton Cat no. CRP-409-70-57-SLGL-NSG or equivalent make of Philips/Havells/Surya.

S & F Street light/Outdoor light/Compound light Timer DB(water proof) concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment and fabricated with following items as per instructions of EIC i)240 V,6-32A SPMCB of breaking capacity 10KA & "C" Characteristic-----01no ii) 240 V 6-32 A DP MCB Isolator on din rail---01 no iii) 240V, 2P, Power contractor (rating above 20 Amp) with accessories-----01 no iv)Astronomical time switch---01 No v)Toggle switch for manual/auto operation---01 no vi)Double door 2+4 way SPNDB-----1No vii) Necessary connection by copper wire. [Make:ABB, Siemens,Legrand,L&T,Havelles or as per EIC]

Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) of size 8"X10" comprising of 4 way 100 Amp. Capacity brass stud/terminal make- AC /DC, having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement,comprising of one 250V,15A kit-kat fuse unit,one NL on porcelain insulator etc. conceal in wall as per direction of EIC

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of pain 1st coat of aluminium paint over 1 coat of RO priming

2nd coat of aluminium paint over 1st coat

Repairing of Existing Muffing & painting as per direction of E.I.C

LALIN SINGH CONSTRUCTION (BID ID -6832117)

GENUINE ENGINEERING WORKS (BID ID -6816173)

RS SYSTEMS AND PROJECTS (BID ID -6803115)

Allied Concern (BID ID -6820499)