SPECIAL REPAIR REPLACEMENT OF ELECTRICAL INFRA AGAINST STORM DAMAGE AND POWER CABLE AT CERTAIN UNITS UNDER GE (A) JAISALMER

Amount

Taking down existing stractural steel (cross arms) of any description complete all as specified and directed by Engineer-in-charge.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in hard rock complete all as specified & directed by Engineer-in-Charge. Note (i) Hard rock obtained from excavation shall be stacked properly. Stacked hard rock shall be measured by deducting 50% quantity for voids for hard rock, remaining quantity measured and paid under of soft/disintegrated rock. (ii) Hard rock obtained shall be issued under Schedule of credit, which shall be the contractor's property but not be allowed for usage in masonry work.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm on plan and getting out in soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

All as per item No. 3.00 here-in-before but exceeding 1.5m deep and not exceeding 3.00m deep.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soft/ disintegrated rock complete all as specified & directed by Engineer-in-Charge.

Removing excavated material soft/ disintegrated rock to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed by the Engineer-in-Charge.

M&L for sand cushioning to underground PVC/XLPE cable with tibba sand and punning to provide required cover complete all as directed by Engineer-in-charge. (Note :- Punned thickness of sand cushioning shall only measured and paid).

Supplying and laying Jodhpur stone quarry faced stone slab cover 25 to 30 cm in width, 50 to 60 cm long and 40 to 50 mm thick, laid dry and abutting each other with gap between adjacent slab not exceeding 10 mm over under ground cables for protection complete all as specified & directed by Engineer-in-charge.

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate in foundation for PCC poles/struts complete all as specified & directed by Engineer-in-Charge.

M & L for plain cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate in foundation of stay assembly complete all as specified & directed by Engineer-in-Charge.

M&L for plain cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) for pedestal/ coping/ plinth of poles, including necessary form work finished even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

Supply, laying and testing LT XLPE insulated, armoured heavy duty, electric cable, with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sqmm 4 Core and including taking down existing unserviceable cable complete all as specified & directed by Engineer-in-charge.

Supply, laying and testing LT XLPE insulated, armoured heavy duty, electric cable, with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 4 Core and including taking down existing unserviceable cable complete all as specified & directed by Engineer-in-charge.

Supply, laying and testing LT XLPE insulated, armoured heavy duty, electric cable, with aluminium conductor, 1100 volts grade, cross-sectional area 95 Sqmm 3½ Core and including taking down existing unserviceable cable complete all as specified & directed by Engineer-in-charge.

M&L for stay assembly with 16mm diameter of stay rod complete accessories as shown in electrical plate No. 1 (loop type insulator, stay clamps, excavation and concrete measured separately) and taking down existing unserviceable stay assembly complete all as specified & directed by Engineer-in-charge. (Note :- Loop type insulator, stay clamps, excavation and concrete shall be measured and paid separately).

M&L for prestressed cement concrete pole 9 metre long, 102 mm x 172 mm at top and 102 mm x 279 mm at bottom class -10 confirming to IS-1678 and including making alternate white and black strips 30 cm height (Total 5 Nos), with two coats of synthetic enamel paint over a coat of primer and including taking down existing unserviceable pole of any description complete all as specified & directed by Engineer-in-charge. Note :- Rate quoted by the Contractor shall deemed to inclusive of demolition of existing PCC coping, foundation etc, and carefully taking out the pole, M&L errection, painting to new pole complete.

M&L for prestressed cement concrete pole 11 metre long, 152 mm x 152 mm at top and 152 mm x 260 mm at bottom class -9 confirming to IS-1678 and including making alternate white and black strips 30 cm height (Total 5 Nos), with two coats of synthetic enamel paint over a coat of primer and including taking down existing unserviceable pole of any description complete all as specified & directed by Engineer-in-charge. Note :- Rate quoted by the Contractor shall deemed to inclusive of demolition of existing PCC coping, foundation etc, and carefully taking out the pole, M&L errection, painting to new pole complete.

S&F Junction Box for street light made of PVC box including MCB 10Amps - 01 No and terminal 3 Nos for single phase and neutral on porcelain based insulator with locking arrangement fixed to pole with MS clamps made with FI 20mm x 3mm of suitable size with nuts, bolts & washer including painting of MS clamp and including taking down existing unserviceable junction box of any description complete all as specified & directed by Engineer-in-charge.

S&F copper conductor cable of size 1.5 sqmm, two core, 1100 volts grade and including taking out existing cable complete all as specified and directed by Engineer-in-charge

S&F galvanised iron bracket of 'medium grade' pipe 40 mm bore, length 1.20m, bend to required shape with 2 Set of clamps made of 40x6mm FI and suitable size of bolts, nuts & washers, etc duly painted with two coats of aluminium paint over a coat of red oxide primer complete for fixing street light fittings and including taking down existing unserviceable bracket of any description complete all as specified and directed by Engineer-in-charge.

S&F steel water tubing 25 mm bore, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in trench on pole for protection of cable etc and including taking down existing pipe of any description complete all as specified & directed by Engineer-in-charge.

S&F steel water tubing 100 mm bore, 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors in trench on pole for protection of cable etc and including taking down existing pipe of any description complete all as specified & directed by Engineer-in-charge.

M& road cutting in trenches for laying cable protection pipe including making good the surface with top 200mm thick shall filled with PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) complete all as specified & directed by Engineer-in-charge. Note :-(i) Rate quoted by the tenderer shall be deemed to inclusive of road cutting, earth work excavation and concreting complete. (ii) Supply & Laying GI pipe will be measured and paid separately under respective item.

S& F highly efficient IP 66 and IS 10322/IEC-60598 LED street light with aluminium pressure dia cast housing to toughened glass in the front and individual optical lense with high power LED with wattage not less than 2.5 watt and integral poted type electronic constant current driver, PF ≥0.95 and system efficiency ≥100 and CRI≤70 suitable for 25 Wattage and including taking down existing LED street light of any description complete all as specified & directed by Engineer-in-charge. Note: Manufacturar should submit LM 79 and LM 80 Certificate along with inhouse NABL accrediated lab testing certificate and photometry test certificate of the batch of LED supplied.

S& F highly efficient IP 66 and IS 10322/IEC-60598 LED street light with aluminium pressure dia cast housing to toughened glass in the front and individual optical lense with high power LED with wattage not less than 2.5 watt and integral poted type electronic constant current driver, PF ≥0.95 and system efficiency ≥100 and CRI≤70 suitable for 60 Wattage and including taking down existing LED street light of any description complete all as specified & directed by Engineer-in-charge. Note: Manufacturar should submit LM 79 and LM 80 Certificate along with inhouse NABL accrediated lab testing certificate and photometry test certificate of the batch of LED supplied.

M&L fabricate, structural mild steel RS joist, channel angle iron, flate iron and brackets etc for fabrication of cross arms, bracing supports clamps including D clapms, eye hook and back plate etc fabricated from structural steel section including nuts, bolts, washers, welding (Cold and Hot) drilling holes for bolts, bend to any shape or size as indicated and directed, inclusive of one primer coat and two coats of aluminium paint after preparation of surfaces complete all as specified and directed by Engineer-in-charge.

Supply and fixing aluminium conductor steel reinforced [ACSR] straining properly on insulators on PCC pole and binding with aluminium tape/binding wire, connectors, jumpers etc including taking down old ACSR conductor complete all as specified and directed by Engineer-in-charge of required size. Note: - Measurement & payment shall be made by measuring horizontal distance between centre of two adjacent pole by adding 3% extra for sag, joints and jumper etc.

Supply and fixing galvanised earth wire of size 4.00 mm dia, straining properly on cross arms on PCC pole and binding with aluminium tape/binding wire, connectors and including taking down existing GI earth wire complete all as specified & directed by Engineer-in-Charge.

Supply & fix shackle type, Porcelain, vitreous, white, brown or green insulator 75mm high, 90mm dia, 1100 volts including galvanised mild steel straps (31x3mm), washers, insulator bolts (12mm dia), washers and nuts complete all as specified & directed by Engineer-in-Charge.

M&L for pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100mm height, 65mm dia for 1100 volts grade complete all as specified and directed by Engineer-in-charge.

M&L Steel Tubular Swaged welded Pole, type 410 SP-22 (8.5 metres long) including Cast Iron Base Plate, Finial Taper Plug, Cap, Mild Steel Bolts, Nuts, Screws, etc. including applying Two Coat of Black Bituminous Paint Internally and Externally up to Planting Depth and applying with two coats of Aluminium Painting over a coat of red oxide primer with Synthetic Enamel Paint (First Grade/quality) and including taking down existing unserviceable pole of any description complete all as specified & directed by Engineer-in-charge. Note :- Rate quoted by the Contractor shall deemed to inclusive of demolition of existing PCC coping, foundation etc, and taking out unserviceable pole, errection of new pole and painting as specified.

S&F Lithium based energy efficient Integrated solar street light of 40 watt in single FRP body with duly polyurenthane coating encases with monocrystalline solar PV panel of 30/35Wp, Lithium battery 11.1/12.8 Volt, 19.8 Ah with inbuit BMS, IP 65, High brightness W-LED (160-180 Im/Watt) lamp with aluminium reflector for better lighting distribution, CRI 70, colour temperature 5700 K-6500 K, Microcontroller based charge controller cum driver, automatic dimming function with PIR motion sensor, Dusk to dawn operation weight not more than 10-12 KG with adjustable MS Clamp suitable for existing pole/wall mounting etc and including taking down existing solar street light of any description complete all as specified & directed by Engineer-in-charge. Note : Short Circuit, overload, reverse polarity and battery protections to be provided. OEM should provide vital parameters test report from NABL accredited lab and should be of made in India with CE & TOHS complaint

S & F MNRE resistered /approved 500 LPD non pressurised FPC stainless steel hot water tank with inner tank material 1.2mm Galvanised iron with outer cladding of painted & oven back pre coated galvanised sheet, insulated with 50 mm thick high density PUF insulation with thermostat and heater coil 2 KW x 2 Nos with thermostate control 230V AC and suitable size of MSZ powder coated stand 25x3 mm angle frame with required PCC work 1:2:4 for foundation / fixing and including taking down existing tank of any description complete all as specified & directed by Engineer-in-charge.

S&F for LED post Top lantern/gate light 35 watt light fitting made of cost aluminium spigot housing with decorative opal acrylic diffuser with IP 65 protgection complete with all assessories including removal of old unserviceable broken /damage complete all as specified and directed . Make : Havells Cat Part No CORALPT35W LED830PYSMTOOPC or equivalent in Appx 'C' list of makes.

Anil Builders

M/s Shree Construction Company

M/s Rohit Construction Co.

M/s Yash Electrical and Maintenance

AJ. Owners

M/S SHREE AAINATH ENTERPRISES

SHRI HARI CONSTRUCTION

ALPHA ENGINEERING COMPANY

Shri Maruti Trading Co.