REPAIR TO CERTAIN ROADS AT SUNJUWAN MIL STN UNDER GE JAMMU.

Amount

Repair to pot holes, not exceeding 30mm depth and not exceeding 01 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Paving Bitumen of Grade VG-30) at the rate of 05 Kg per 10 Sqm of surface, putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 Kg/Sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings), complete all as specified and as directed.

Preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Paving Bitumen of Viscosity Grade VG-30) at the rate of 5 Kg per 10 Sqm of surface laying bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5 % binder content of viscosity grade VG-30 by weight of total mix and 4% stone dust conforming to specification for filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using 8 to 12 tonne power roller, complete all as specified and as directed. Note:-The minimum consolidated thickness will be 30mm. However it may be increased at places to maintain the camber as per the site requirement and nothing extra shall be admissible on this account. The contractor must visit the site before quoting their rates.

Premixed bituminous macadam with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade VG-30 grade by weight of total mix (Consolidated thickness 75mm or less), laid / rolled and compacted to required gradient and camber using power roller 8 to 12 tonne, complete all as specified and as directed.

Marking lines 2.5mm thick , dashes arrows etc of any description not exc 10 cm width/girth on road surface using hot applied thermo plastic road marking paint mixed with raidum glass beads @ 250 gms/Sqm with automatic machine to provide reflectivity and night vision (approximate temperature being 200 degree celsius at the time of laying) including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation at site and traffic control, complete all as specified and as directed.

Solar road studs having 3 LED of colour Red / Yellow to side cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 MCD completed as per manufactures instructions fixed in repairs, complete all as specified and as directed.

Cat eye solar reflactive type metal body alloy of size 100mm x 100 x20mm with PAMA striplenes reflector fixed with and incl MS stud of suitable size as per manafacture instruction, fixed in repairs (Modal No DA 972 of Dark Eye or equivalent in makes as per list of makes) complete all as specified and as directed.

Metal tubular dealinator made out of ABS round body fitted with 2 nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height above GL duly powder coated and thermo plastic elastomer 3 bands of green red and yellow reflector radium type of 25mm wide strips with anti theft steel net for reflector protection incl embedding in PCC 1:2:4 150X150X300mm type B1 fixed in repairs complete all as specified and as directed.

Taking down old unserviceable sign boards of any description including frame work from ground surfaces, complete all as specified and as directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 Cu.m, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m and making good surface for in any type of soil complete all as specified and as directed.

PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate in foundation, filling and mass concrete complete all as specified and as directed.

Stainless steel pipe of grade 304 S of circular/square section not less than 1.40 mm thick of superior quality steel sheet , as in frame structure of sign board including cutting , seamless welding and framing complete all as specified and as directed.

Retro reflective , double sided road sign boards comprising of 4mm thick aluminium composite panel (ACP) sandwiched with 0.50mm thick ACP sheet on both side fancy finished or PDVF coated as base board over and including micro prismatic retro reflective sheet and electro cut coloured overlay film ,ACP sheet shall be routed folded and fixed to frame with 24mm ,wide and 2.3mm thick VHB tape provided all around the frame incl riviting at right angle face of the frame with POP riveting or with self taping stainless steel screws 5mm dia , spaced not more than 300mm centre to centre ensuring that no riveting is seen on either face of the frame , micro prismatic retro reflective sheet conforming to type -XI of IRC 67: 2012 sheel be pressure fixed as background sheet on both side of ACP which will be over laid with electro cut transparent film of approved make and colour to create a desired name information message incl all materials required for fabrication , ereaction and installations and fixed to steel frame complete all as specified and as directed. Note Stainless steel frame shall be measured and paid seperately under respective item

Road safety 800 mm dia convex polycarbonate acrylic unbreakbale mirror fixed over and incl 2100mm height above ground level of 75mm dia stainless steel pipe above road surfaces fixed in ground with PCC (1:2:4) minimum 450mm deep in ground fixed in repairs complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings, of any thickness (below or above ground level). complete all as specified and as directed.

75 mm thick PCC type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) in floor or sub bases, complete all as specified and as directed.

60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

Precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in kerb stone of size and shape as directed and approved, set and jointed in cement mortar 1:4 including necessary excavation, earthwork and removal of surplus soil to a distance not exceeding 50 m complete complete all as specified and as directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid in dry.

s s construction (BID ID -3126235)

Sarbat Construction Co (BID ID -3126522)