Renovation work of Computer Center and CM Reference Cell at E and C Office Cantt. Road, Lucknow (LOT-06)

Amount

12mm cement plaster in sigle coat in single storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc including the Dismantling existing plaster, including disposal of refuse as directed by the Engineer-in-charge with in distance of 60m.

Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismentled materials as directed by the Engineer -in-charge with in a distance of 60m.

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :Thickness above 25 mm up to 40 mm.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), excaveted soil and disposal of surplus excavated soil as directed, within a lead of 50 m including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the all kinds of soils.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level 1 : 4 : 8 (1 Cement : 4 Coarse sand : 8 graded stone aggregate 20 mm nominal size)

P/F HEP make HCI pipe in 1.8 Metre length 150 mm dia with Socket weight 22 kg

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) :3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix(1cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular)

Providing and injecting chemical emulsion for pre-constructional anti termite treatment and creating a chemical barrier under and all-round the column pits wall trenches basement excavation top surface if plinth filling junction of wall and floor, along the external perimeter of binding expansion joints, surrounding of pipes and conduit etc. complete (Plinth area of the building at ground floor only shall be measured as per 1.S.:6313 (Part II 1988) Aldrine emulsifiable concentrate or any other approved material such as Heptachlor or chlordane will be used. The rate of application of chemical emulsion shall be as follows:

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Supply & fixing of anodised/aluminium portion having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5x44.65 mm as vertical member & 114.00 x 44.45 mm size tube in bottom and horizontal members door chaukhat should be ofaluminium tublar vertical with two openable shutters. The rate will include cost of material fixtures, 5 mm glass handles, locks, screw necessary beading & excluding cost of floor spring if required for proper completion of work as per direction of Engineer-in-charge.

Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body /plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Size of Tile 1200 x 1200 mm

Provinding and Fixing 15 mm thick densified tegular edged eco frendly ligh weight calcium silicate false ceilling tiles of approved texture of size 595x595 mm in ture horizontal level, suspended on inter loacking metal grid of hot dipped galvanised steel section ( galvanising @ 120 grams per sqm including both side) consisting of main 'T' runner suitable spaced at joints to get required length and of size 24x38 mm made from 0.33 mm. thick (minimum) sheet, spaced 1200 mm. centre to centre and cross 'T' of size 24x28 mm. made out of 0.33 mm (minimum) sheets 1200 mm long spaced between main 'T' and 600 mm. centre to centre form a grid of 1200x600 mm. and secondary cross 'T' of length 600 mm and size 24x28 mm made of 0.33 mm thick (minimum) sheet to be inter locked at middle of the 1200x600 mm. resting on periphery walls/ partitions on a Perimeter wall angle pre-coated steel of size (24x24x2300 mm make of 0.40 mm thick (minimum sheet with the help of rawl plugs at 40 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including cutting/making opening for serivces like diffusers, grills light fitting fixtures smoke detectors etc, wherever required. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm. G.I. adjustable rods with galvanised sheet level clips of size 85x30x0.8 mm. spaced at 1299 mm centre to centre along main 'T' bottom exposed with 24 mm. of all tsections shall be pre-painted with polyster baked paint for all heights as per specifications. drawing and as directed by Eng. in charge

Providing & fixing Free Standing Partition Panel

Providing of PVC Vertical blinds with slat width 25mm and slat thickness 2mm

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Makrana white second quality

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished seamless type tubes.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing & fixing white vitreous china water less urinal of size 600 x 330 x 315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal

P/F 600x460 mm bevelled edge mirror of superior glass ( of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C.P. brass screws and washers.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a sigle 15 mm C.P.brass pillar taps

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe 32mm dia

C.P.Brass towel rail 450x20 mm toether with pair of C.P. brass brackets to fit the towel rail.450x20 mm

P/F C.P. brass Soap Dish , Jaquar ESSCO, Cera, Hindware.

P/F toilet paper holders Jaquar ESSCO, Cera, Hindware.

P/F PVC Connection 6000mm long with two brass unit 15mm dia

Providing & fixing Plain glass in window (Best quality, cut to size, including wastage)Black/grey/green 4.8 to 5.7 mm thick.

Supply and fixing of 36 Watt to 46 Watt above 3300 leumin indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink and diffuser of Special Polycarbonate meterial and driver set complete in all respect.

S/F of Power plug with 20 A/250 V flush type modular switch and 5 pin 20 A/250 V flush type Universal modular socket switch on conceiled M.S. box including supply of all M/l/T& P Etc. required for completion of work.

S/F of Flush/ surface mounting 6 ways TPN distribution (Legrand Lexic) without MCB with additional metal door complete in all respect , as directed at site by Engineer-in-charge.

Supply and fixing of 12 Watt to 15 Watt indoor Recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing with extended heat sink, diffuser of Polycarbonate meterial and driver set complete in all respect

Wiring point for fan/ fresh air fan ( light duty exhaust fan) with in 1.5 Sq.mm. FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe conceled in wall, complete with 14 SWG copper earth continuty wire, piano type switch & ceiling rose on 3 mm thick Phenplic laminated back light sheet etc. complete in all respect. including matching colour wash

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Wiring for circuit/submain wiring alongwith earth wire with 4x2.5sqm+2x2.5 sqm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt ) as required

Supplying and fixing of 40mm medium class PVC conduit along with accessories in surface/recess including cutting tha wall and making good the same in case of recessed conduit as required .

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Providing and fixing 100A 4 Pole Isolator.

Providing and fixing 63A, 4 Pole Isolator.

Providing and fixing 6A, 32A ratings , SP MCB, "C" Curve, 10KA breaking capacity.

Providing and fixing 4 Pole MCCB, 400A, 50KA.

Supplying and fixing 8way,double door , single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface, recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections, powder painted including earthing etc. as required.(but without MCB/RCCB/Isolator)

Wiring point for call bell with 1.5 sqmm FR PVC insulated multistrand single core copper conductor cable in heavy gauge rigid steel conduit pipe concealed in the wall, complete with 14 SWG copper earth continuty wire, piano type switch bell push or 2 pin socket etc. complete in all respect. including matching colour wash.

Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required.

(i) size 2 Module (75mm X 75 mm)

(ii) size 3 Module (100mmX75mm)

(iii) size 4 Module (125mmX75mm)

(iv) size 6 Module (200mmX75mm)

(v) size 8 Module (125mmX125mm)

(vi) size 12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 2 way 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 15/16 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3 pin 5/6 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required Telephone socket outlet

Supply and wiring of submain with two number 4 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy guage rigid steel conduit partly concealed in wall and partly laid in slab alongwith reinforcement before concreting, with one number 14 SWG copper earth continuity wire including matching colour wash etc.complete in all respect.

Supply and fixing of 1.5 sq.mm ISI marked, FRLS PVC insulated, single core copper conductor cable.

Supply and fixing of 2.5 sq.mm ISI marked, FRLS PVC insulated, single core copper conductor cable.

Supply and fixing of 4 sq.mm ISI marked, FRLS PVC insulated, single core copper conductor cable.

Supply and fixing of 6 sq.mm ISI marked, FRLS PVC insulated, single core copper conductor cable.

M/S AAKASH TRADERS